Maybe an other DSL Line is offline, so your SNR got better
Αναζήτηση:
Type: Posts; Χρήστης: VelleX; Λέξη(εις) Κλειδιά:
Αναζήτηση: Η αναζήτηση ολοκληρώθηκε σε 0,86 δευτερόλεπτα
-
24-02-09, 02:15
- Μηνύματα
- 3.401
- Εμφανίσεις
- 593.244
Υπόμνημα: Re: DMT γραφήματα ADSL συχνοτήτων (συζήτηση / σχολιασμός / επεξηγήσεις)
-
30-11-08, 04:56
- Μηνύματα
- 3.401
- Εμφανίσεις
- 593.244
Υπόμνημα: Re: DMT γραφήματα ADSL συχνοτήτων (συζήτηση / σχολιασμός / επεξηγήσεις)
No gap, but line could be better for Annex A and that attenuation. Maybe because of crosstalking.
I have an Annex B line and it is much better wiht even higher attenuation. -
16-11-08, 04:06
- Μηνύματα
- 3.401
- Εμφανίσεις
- 593.244
Υπόμνημα: Re: DMT γραφήματα ADSL συχνοτήτων (συζήτηση / σχολιασμός / επεξηγήσεις)
@nd33
Dont know if i really understand your posting. What the Problem?
You have a 2048/256kbps line. What speed do you get? When downloading?
In DMT screenshot number 3 you have only 1027kbps, because of the Power-saving mode L2, which is active. But after making some traffic it should change to full-power mode L0.
And please make DMT screenshots with "file/snapshot" instead of making 1MB Bitmaps ^^ -
07-11-08, 22:23
- Μηνύματα
- 3.401
- Εμφανίσεις
- 593.244
Υπόμνημα: Re: Απάντηση: DMT γραφήματα ADSL συχνοτήτων (συζήτηση / σχολιασμός / επεξηγήσεις)
Το κενο στο τελος γιατι υπαρχει ;
http://img353.imageshack.us/img353/6789/modemjd1.jpg
Why? No idead. Dont even know if the provider knows it, but its just an setting in the DSLAM. Seems you are on an DSLAM with Broadcom chipset. Maybe Alcatel. In Germany theres the same Problem with these DSLAMs which some Providers use.
The frequencies 1800-2000khz have an lowered transmit power. -
07-11-08, 17:50
- Μηνύματα
- 3.401
- Εμφανίσεις
- 593.244
Υπόμνημα: Re: DMT γραφήματα ADSL συχνοτήτων (συζήτηση / σχολιασμός / επεξηγήσεις)
@DaveMurray
There's no 6.x firmware for v7 Thomson ^^
At DSLAM with Infineon Chipset, Transmit power often shows 0dBm, and there are also these typical gaps at tone 110, 127, 188, 191... -
02-11-08, 17:18
Θέμα: Thomson ST585v6 Firmware Release 7.4.3
Από VelleX- Μηνύματα
- 307
- Εμφανίσεις
- 74.673
Re: Απάντηση: Thomson ST585v6 Firmware Release 7.4.3
1) Πλεον αν κανω τον ελεγχο "Check connectivity to the Internet" την τελευταια ενδειξη Ιnternet δε μου τη βγαζει με πρασινο V αλλα με κοκκινο X
Maybe your Gateway (Access Concentrator) just does not respond to pings.
2) Στην αριστερη μερια εχω την εντυπωση οτι εχουν αλλαξει οι ενδειξεις.
46364
Βεβαια δε θυμαμαι 100% πως ηταν πριν, αλλα νομιζω πως η εμφανιση ηταν λιγο διαφορετικη. (νομιζω ειχε και καποια icons εκτος απο σκετα γραμματα).
Οχι πως ειναι σημαντικο, απλα ρωταω γιατι φοβαμαι μηπως τα παραπανω σημαινουν οτι δεν εκατσε σωστα το νεο Firmware. :(
Press the reload button of your browser -
30-10-08, 04:10
Θέμα: Thomson ST585v6 Firmware Release 7.4.3
Από VelleX- Μηνύματα
- 307
- Εμφανίσεις
- 74.673
Re: Thomson ST585v6 Firmware Release 7.4.3
@Skyhigh
When did you have an attenuation of 19dB? With which firmware? Because since 7.x the attenuation is displayed higher. Up to 6.2 i had 11dB and and since 7.x+ i have 13 or 13,5dB.
Also your SNR Margin is at 10dB. Is that the default noise margin of your provider? If not, then let the speedtouch reconnect. -
24-10-08, 19:13
Θέμα: forthnet 24mb st 780 by vivodi
Από VelleX- Μηνύματα
- 6
- Εμφανίσεις
- 1.452
Re: forthnet 24mb st 780 by vivodi
The transmit power is very low. Maybe try an other firmware if available.
-
20-10-08, 13:15
- Μηνύματα
- 3.401
- Εμφανίσεις
- 593.244
Υπόμνημα: Re: DMT γραφήματα ADSL συχνοτήτων (συζήτηση / σχολιασμός / επεξηγήσεις)
@PanosChios
the gaps are maybe because of a infineon DSLAM chipset used. The gaps there are always at the same tones.
Also the displayed transmit power of 0dB could be because of the chipset, so its just not displayed correctly.
And i think if tramsmit power is lower, the gaps will not be there. -
02-08-08, 20:58
Θέμα: Firmware 8.2.1
Από VelleX- Μηνύματα
- 45
- Εμφανίσεις
- 22.993
Re: Firmware 8.2.1
I think the menu will be in english too, but the firmware is optimized for germany.
-
18-07-08, 14:30
Θέμα: ST 536i v6 Firmware Update 7.4.3.2
Από VelleX- Μηνύματα
- 27
- Εμφανίσεις
- 11.565
Re: ST 536i v6 Firmware Update 7.4.3.2
adsl config xdsltype adsl2+
-
29-06-08, 16:08
Θέμα: Thomson ST585v6 Firmware Release 7.4.3
Από VelleX- Μηνύματα
- 307
- Εμφανίσεις
- 74.673
Re: Thomson ST585v6 Firmware Release 7.4.3
Standard user is Administrator and passwort is empty. Did you try that?
-
26-06-08, 12:40
Θέμα: Αλλαγή dsl mode σε SpeedTouch 536iv6
Από VelleX- Μηνύματα
- 2
- Εμφανίσεις
- 2.119
Re: Αλλαγή dsl mode σε SpeedTouch 536iv6
You can use STMT or via telnet:
adsl config xdsltype adsl2+
for old firmwares:
adsl config opermode=multi_adsl2plus -
25-06-08, 01:49
Θέμα: ST 536i v6 Firmware Update 7.4.3.2
Από VelleX- Μηνύματα
- 27
- Εμφανίσεις
- 11.565
Re: ST 536i v6 Firmware Update 7.4.3.2
Available Interface Languages are "de/en/fr/it", but maybe the firmware is optimized for germany. But of course you can try it.
-
22-06-08, 20:04
- Μηνύματα
- 70
- Εμφανίσεις
- 26.776
Re: Thomson TG585v7 Firmware 7.4.4.7 (Γερμανικό μενού)
not his firmware, but the ST5x6_GeChGen_R7447_rel.zip :p
-
22-06-08, 03:06
Θέμα: Thomson ST585v6 Firmware Release 7.4.3
Από VelleX- Μηνύματα
- 307
- Εμφανίσεις
- 74.673
Re: Thomson ST585v6 Firmware Release 7.4.3
There is only one firmware for both Annexes. The Hardware is different.
-
12-06-08, 21:16
- Μηνύματα
- 70
- Εμφανίσεις
- 26.776
Re: Thomson TG585v7 Firmware 7.4.4.7 (Γερμανικό μενού)
menu is english too
-
11-06-08, 05:33
Θέμα: Thomson ST585v6 Firmware Release 7.4.3
Από VelleX- Μηνύματα
- 307
- Εμφανίσεις
- 74.673
Re: Απάντηση: Re: Απάντηση: Re: Thomson ST585v6 Firmware Release 7.4.3
it says it is not compatible with my firmware (7.4.1.7) and when i try to upgrade it to 7.4.3.2 (the newest) the upgrade manager says it cannot find a speedtouch device in my lan :hmm:
edit fixed it by unticking the option "get version info" :p:oops:
you can let "get version info" checked and check "allow untested firmware versions" in the misc. options. -
10-06-08, 22:41
Θέμα: Thomson ST585v6 Firmware Release 7.4.3
Από VelleX- Μηνύματα
- 307
- Εμφανίσεις
- 74.673
Re: Απάντηση: Re: Thomson ST585v6 Firmware Release 7.4.3
in which menu can somebody find that option? :hmm:
in DMT and STMT. I had same problem when using it with firmware 7.4.2. Dont know if there is still that problem, because i have "get cpu/mem stats" not activated. -
10-06-08, 21:56
Θέμα: Thomson ST585v6 Firmware Release 7.4.3
Από VelleX- Μηνύματα
- 307
- Εμφανίσεις
- 74.673
Re: Thomson ST585v6 Firmware Release 7.4.3
Uncheck the option "get cpu/mem stats"
-
06-05-08, 05:28
Θέμα: Linksys WAG160N
Από VelleX- Μηνύματα
- 460
- Εμφανίσεις
- 123.019
Re: LINKSYS WAG160N
WAG160N has a Broadcom chipset, so look if Telnet is accessable, and then try DMT v8 to get line stats
-
29-04-08, 16:34
- Μηνύματα
- 27
- Εμφανίσεις
- 5.384
Re: solution: Πώς βλέπουμε το max attainable rate σε 585 με > 7.x firmware
Windowskey+R (or start/run)
cmd
telnet 192.168.1.254 -
27-04-08, 11:34
- Μηνύματα
- 2
- Εμφανίσεις
- 1.376
Re: Speedtouch585V6 (PSTN) και ρύθμιση για G.DMT
In telnet/CLI, type
adsl config opermode multimode
or for Firmware 6.2+
adsl config xdsltype adsl -
21-04-08, 17:37
- Μηνύματα
- 27
- Εμφανίσεις
- 5.384
Re: solution: Πώς βλέπουμε το max attainable rate σε 585 με > 7.x firmware
its better to login with 2 sessions to telnet. One for the command input, and one for the debug output.
I also noticed it some month ago, in the firmware v7.
I wonder why the attainable rate is removed from "adsl info" and also the DSLAM Vendor ID, because its still there
DATARATE US = 925 kbps; DS = 18143 kbps
ATTNDR US = 1397 kbps; DS = 23504 kbps
NM US = 210 dB; DS = 103 dB
POWER US = 125 dBm; DS = 191 dBm
ATT US = 83 dB; DS = 130 dB
OperMode = 200; detailed=1
TDSL atmTraffic: absRx= 27 absTx= 0 relRx= 0 relTx= 0
TDSL atmTraffic: currRx= 15 currTx= 0
CO VendorId= 0xB5 0x00 0x42 0x44 0x43 0x4D 0x61 0x9D :
CO Ansi VendorId=0x8042 : revNbr=28, stdRev=68 -
21-04-08, 17:31
Θέμα: LinkSys WAG200G
Από VelleX- Μηνύματα
- 1.994
- Εμφανίσεις
- 386.342
Re: LinkSys WAG200G
yes, and then he would also get 256kbps upstream ^^
But of course it wont make a real difference. -
20-04-08, 13:10
Θέμα: d-link και ταχυτητα adsl
Από VelleX- Μηνύματα
- 6
- Εμφανίσεις
- 1.845
[D-Link] Re: d-link και ταχυτητα adsl
Maybe he could get the Bit allocation by using OrbMT, choosing "Avalanche SAR" in the options.
-
20-04-08, 09:26
Θέμα: DMT tool - Τι σημαινει αυτο?
Από VelleX- Μηνύματα
- 144
- Εμφανίσεις
- 54.392
Re: DMT tool-Τι σημαινει αυτο?
@capvag
I think the gaps are because of your DSLAM with infineon chipset. They are typical for it. Dont know why exactly -
20-04-08, 09:22
Θέμα: DMT tool - help
Από VelleX- Μηνύματα
- 48
- Εμφανίσεις
- 139.177
Re: DMT tool - help
did you try dmt v5 or v6 for the zyxel?
-
29-03-08, 14:34
Θέμα: linksys WRT54GL με speedtouch 536
Από VelleX- Μηνύματα
- 1
- Εμφανίσεις
- 2.230
Re: linksys WRT54GL με speedtouch 536
Do you use your speedtouch at the moment as Router or as Bridge? Because of course you have to set up your speedtouch first as bridge, and then you can connect it to the WAN Port of the Linksys WRT54GL.
Then You just have to connect your computers via LAN to the WRT54GL. -
24-03-08, 22:51
Θέμα: STATUS LinkSys WAG200G ειναι ΟΚ
Από VelleX- Μηνύματα
- 4
- Εμφανίσεις
- 1.420
Re: STATUS LinkSys WAG200G ειναι ΟΚ
I dont know what "Αψογος!!!" means, but @tedd
Of course as i wrote the attenuation is fine, but the SNR Margin is not good for that attenuation. Even its a Annex B connection, he should get more down speed, and a better SNR Margin in upstream. -
24-03-08, 15:28
- Μηνύματα
- 12
- Εμφανίσεις
- 8.384
Re: LINKSYS WAG200G-EU ή LINKSYS WAG54GS-EU
I think the WAG54GS has maybe a better ADSL2+ part, because of its Broadcom Chipset, but dont know how the firmware is.
There were also the ability to change the SNR Margin via telnet, but dont know if telnet is still activated with latest firmwares.
But there is also a new WAG160N which should be available this soon (april). Its a new n-draft router with Broadcom BCM6358 chipset.
EDIT: But dont know if there is an Annex A Model. -
23-03-08, 16:12
- Μηνύματα
- 59
- Εμφανίσεις
- 21.567
Re: Latest firmware 7.4.2 για SpeedTouch 585i V6
ok, of course at the moment there is only the Firmware for the 5x6 v6 models available, so no firmware for 585 v6 yet.
So of course you both can't test it, sorry ^^ -
23-03-08, 14:10
Θέμα: STATUS LinkSys WAG200G ειναι ΟΚ
Από VelleX- Μηνύματα
- 4
- Εμφανίσεις
- 1.420
Απάντηση: STATUS LinkSys WAG200G ειναι ΟΚ
Well, your attenuation is very good, but the Downstream/Upstream Margin should be higher with that attenuation.
Maybe you should try the latest firmware.
Your download speed is ok. You should get a maximum speed about 1731KB/s -
23-03-08, 13:50
- Μηνύματα
- 59
- Εμφανίσεις
- 21.567
Απάντηση: Latest firmware 7.4.2 για SpeedTouch 585i V6
If you already had the 7.4.1 firmware isntalled, you could just test the 7.4.2. If the old config will be imported, there should not be a problem.
-
10-03-08, 20:20
- Μηνύματα
- 6
- Εμφανίσεις
- 2.271
Re: ST 536 v.7.4.1.7 & Μετρήσεις γραμμής...
@kdao88
you could mabye optimize your TCP Receive Window to get more download speed. You should get about 2458KB/s with your bitrate and PPPoE. With PPPoA maybe 2472KB/s.
www.speedguide.net/analyzer.php
So check how large the RWIN is set, if you have Windows XP -
02-03-08, 17:45
Θέμα: Speedport W500V
Από VelleX- Μηνύματα
- 6
- Εμφανίσεις
- 1.395
Re: Speedport W500V
Dein Problem ist wohl eher ein anderes .
Ist ja klar dass bei ihm kein Browser ne internet seite öffnet, wenn noch nichtmal der Standardgateway bzw der DNS Server eingestellt ist.
Auf den Router kam er ja aber wohl ohne Probleme. -
14-02-08, 14:06
- Μηνύματα
- 148
- Εμφανίσεις
- 33.610
Re: Νέο firmware 7.2.0.8 για Speedtouch 5x6/v6
adsl info expand 1
xdsl info expand 1 -
14-02-08, 00:48
- Μηνύματα
- 148
- Εμφανίσεις
- 33.610
Re: Νέο firmware 7.2.0.8 για Speedtouch 5x6/v6
You can get .NET Framework from Microsoft, by Windows Update or from the Homepage.
And you don't need the 0.7.5 patched version. You can just download the latest STMT version -
10-02-08, 22:51
- Μηνύματα
- 346
- Εμφανίσεις
- 102.352
Re: Νεο firmware 7.4.1 για SpeedTouch 585i V6
http://192.168.1.254/cgi/b/dsl/dt/?be=0&l0=1&l1=0
-
03-02-08, 13:40
Θέμα: θόρυβος γραμμής
Από VelleX- Μηνύματα
- 10
- Εμφανίσεις
- 2.944
Re: θόρυβος γραμμής
Well, maybe the SNR Margin is even higher. I think the speedtouch routers just do not display higher values than 31dB. :)
And also the tnrasmit power is very low, so with higher transmit power, the SNR Margin would be higher. -
02-02-08, 19:24
Θέμα: θόρυβος γραμμής
Από VelleX- Μηνύματα
- 10
- Εμφανίσεις
- 2.944
Re: θόρυβος γραμμής
You have an attenuation of about 4dB! Thats very good, and of course your SNR Margin of 31dB is also very good.
With ADSL2+ you could get up to 24mbit -
26-01-08, 15:31
Θέμα: SpeedTouch 585v6 or XXXvX MTU
Από VelleX- Μηνύματα
- 5
- Εμφανίσεις
- 3.289
Re: SpeedTouch 585v6 or XXXvX MTU
i think MTU of 1478 is good for PPPoA/VC-Mux, but not for PPPoE
-
23-01-08, 19:44
Θέμα: LinkSys WAG54GS & DMT (DSL Modem Tool)
Από VelleX- Μηνύματα
- 5
- Εμφανίσεις
- 3.817
Re: LinkSys WAG54GS & DMT (DSL Modem Tool)
First you have to enable telnet.
http://192.168.1.1/setup.cgi?todo=debug
But seems telnet is removed in latest firmware. -
21-01-08, 15:53
Θέμα: LinkSys WAG200G
Από VelleX- Μηνύματα
- 1.994
- Εμφανίσεις
- 386.342
Re: LinkSys WAG200G
Well, the 21dBm should be the Downstream Transmit Power, and the 9dBm the upstream.
-
21-01-08, 15:52
- Μηνύματα
- 148
- Εμφανίσεις
- 33.610
Re: Νέο firmware 7.2.0.8 για Speedtouch 5x6/v6
Is your speedtouch behind a Router? If yes, of course it cant work.
Or do you have a Firewall? -
21-01-08, 14:33
- Μηνύματα
- 148
- Εμφανίσεις
- 33.610
Re: Νέο firmware 7.2.0.8 για Speedtouch 5x6/v6
You need the Upgrade wizard to flash the firmware.
-
21-01-08, 14:09
Θέμα: LinkSys WAG200G
Από VelleX- Μηνύματα
- 1.994
- Εμφανίσεις
- 386.342
Re: LinkSys WAG200G
And the Transmit power up/down is interchanged.
-
21-01-08, 14:05
Θέμα: Speedtouch 585i v6 to 585 v6
Από VelleX- Μηνύματα
- 1
- Εμφανίσεις
- 1.290
Re: Speedtouch 585i v6 to 585 v6
No, its not. The Firmware for both models is the same. And as far as i know there is a difference in the NVRAM of the speedtouches, but i dont know if it is changeable or if the hardware is completely the same at all.
-
21-01-08, 14:01
- Μηνύματα
- 49
- Εμφανίσεις
- 18.987
Re: Thomson Speedtouch 585v7. Το γνωρίζετε/υπάρχει στην Ελλάδα;
As far as i know, the Thomson products were always distributed by ISP and supported by them.
Also in germany only ISP sell them. There are just two shop that sells SpeedTouch Router, but one is only selling Routers branded by different ISP.
The other sells "retail" Products. But its the only one in germany. -
20-01-08, 19:27
Θέμα: speedtouch 585 v6 telnet commands
Από VelleX- Μηνύματα
- 15
- Εμφανίσεις
- 12.056
Re: speedtouch 585 v6 telnet commands
F is hex for 15, so G is 16, H is 17 and T is 29
Εμφάνιση 1-50 από 125