Αναζήτηση:

Type: Posts; Χρήστης: VelleX; Λέξη(εις) Κλειδιά:

Σελ. 1 από 3 1 2 3

Αναζήτηση: Η αναζήτηση ολοκληρώθηκε σε 0,96 δευτερόλεπτα

  1. Υπόμνημα: Re: DMT γραφήματα ADSL συχνοτήτων (συζήτηση / σχολιασμός / επεξηγήσεις)

    Maybe an other DSL Line is offline, so your SNR got better
  2. Υπόμνημα: Re: DMT γραφήματα ADSL συχνοτήτων (συζήτηση / σχολιασμός / επεξηγήσεις)

    No gap, but line could be better for Annex A and that attenuation. Maybe because of crosstalking.
    I have an Annex B line and it is much better wiht even higher attenuation.
  3. Υπόμνημα: Re: DMT γραφήματα ADSL συχνοτήτων (συζήτηση / σχολιασμός / επεξηγήσεις)

    @nd33

    Dont know if i really understand your posting. What the Problem?
    You have a 2048/256kbps line. What speed do you get? When downloading?

    In DMT screenshot number 3 you have only 1027kbps, because of the Power-saving mode L2, which is active. But after making some traffic it should change to full-power mode L0.

    And please make DMT screenshots with "file/snapshot" instead of making 1MB Bitmaps ^^
  4. Υπόμνημα: Re: Απάντηση: DMT γραφήματα ADSL συχνοτήτων (συζήτηση / σχολιασμός / επεξηγήσεις)

    Το κενο στο τελος γιατι υπαρχει ;
    http://img353.imageshack.us/img353/6789/modemjd1.jpg

    Why? No idead. Dont even know if the provider knows it, but its just an setting in the DSLAM. Seems you are on an DSLAM with Broadcom chipset. Maybe Alcatel. In Germany theres the same Problem with these DSLAMs which some Providers use.
    The frequencies 1800-2000khz have an lowered transmit power.
  5. Υπόμνημα: Re: DMT γραφήματα ADSL συχνοτήτων (συζήτηση / σχολιασμός / επεξηγήσεις)

    @DaveMurray

    There's no 6.x firmware for v7 Thomson ^^

    At DSLAM with Infineon Chipset, Transmit power often shows 0dBm, and there are also these typical gaps at tone 110, 127, 188, 191...
  6. Μηνύματα
    307
    Εμφανίσεις
    74.673

    Re: Απάντηση: Thomson ST585v6 Firmware Release 7.4.3

    1) Πλεον αν κανω τον ελεγχο "Check connectivity to the Internet" την τελευταια ενδειξη Ιnternet δε μου τη βγαζει με πρασινο V αλλα με κοκκινο X

    Maybe your Gateway (Access Concentrator) just does not respond to pings.


    2) Στην αριστερη μερια εχω την εντυπωση οτι εχουν αλλαξει οι ενδειξεις.
    46364
    Βεβαια δε θυμαμαι 100% πως ηταν πριν, αλλα νομιζω πως η εμφανιση ηταν λιγο διαφορετικη. (νομιζω ειχε και καποια icons εκτος απο σκετα γραμματα).
    Οχι πως ειναι σημαντικο, απλα ρωταω γιατι φοβαμαι μηπως τα παραπανω σημαινουν οτι δεν εκατσε σωστα το νεο Firmware. :(


    Press the reload button of your browser
  7. Μηνύματα
    307
    Εμφανίσεις
    74.673

    Re: Thomson ST585v6 Firmware Release 7.4.3

    @Skyhigh
    When did you have an attenuation of 19dB? With which firmware? Because since 7.x the attenuation is displayed higher. Up to 6.2 i had 11dB and and since 7.x+ i have 13 or 13,5dB.
    Also your SNR Margin is at 10dB. Is that the default noise margin of your provider? If not, then let the speedtouch reconnect.
  8. Μηνύματα
    6
    Εμφανίσεις
    1.452

    Re: forthnet 24mb st 780 by vivodi

    The transmit power is very low. Maybe try an other firmware if available.
  9. Υπόμνημα: Re: DMT γραφήματα ADSL συχνοτήτων (συζήτηση / σχολιασμός / επεξηγήσεις)

    @PanosChios

    the gaps are maybe because of a infineon DSLAM chipset used. The gaps there are always at the same tones.
    Also the displayed transmit power of 0dB could be because of the chipset, so its just not displayed correctly.
    And i think if tramsmit power is lower, the gaps will not be there.
  10. Θέμα: Firmware 8.2.1

    Από VelleX
    Μηνύματα
    45
    Εμφανίσεις
    22.999

    Re: Firmware 8.2.1

    I think the menu will be in english too, but the firmware is optimized for germany.
  11. Μηνύματα
    27
    Εμφανίσεις
    11.565

    Re: ST 536i v6 Firmware Update 7.4.3.2

    adsl config xdsltype adsl2+
  12. Μηνύματα
    307
    Εμφανίσεις
    74.673

    Re: Thomson ST585v6 Firmware Release 7.4.3

    Standard user is Administrator and passwort is empty. Did you try that?
  13. Μηνύματα
    2
    Εμφανίσεις
    2.120

    Re: Αλλαγή dsl mode σε SpeedTouch 536iv6

    You can use STMT or via telnet:

    adsl config xdsltype adsl2+

    for old firmwares:
    adsl config opermode=multi_adsl2plus
  14. Μηνύματα
    27
    Εμφανίσεις
    11.565

    Re: ST 536i v6 Firmware Update 7.4.3.2

    Available Interface Languages are "de/en/fr/it", but maybe the firmware is optimized for germany. But of course you can try it.
  15. Μηνύματα
    70
    Εμφανίσεις
    26.778

    Re: Thomson TG585v7 Firmware 7.4.4.7 (Γερμανικό μενού)

    not his firmware, but the ST5x6_GeChGen_R7447_rel.zip :p
  16. Μηνύματα
    307
    Εμφανίσεις
    74.673

    Re: Thomson ST585v6 Firmware Release 7.4.3

    There is only one firmware for both Annexes. The Hardware is different.
  17. Μηνύματα
    70
    Εμφανίσεις
    26.778

    Re: Thomson TG585v7 Firmware 7.4.4.7 (Γερμανικό μενού)

    menu is english too
  18. Μηνύματα
    307
    Εμφανίσεις
    74.673

    Re: Απάντηση: Re: Απάντηση: Re: Thomson ST585v6 Firmware Release 7.4.3

    it says it is not compatible with my firmware (7.4.1.7) and when i try to upgrade it to 7.4.3.2 (the newest) the upgrade manager says it cannot find a speedtouch device in my lan :hmm:
    edit fixed it by unticking the option "get version info" :p:oops:

    you can let "get version info" checked and check "allow untested firmware versions" in the misc. options.
  19. Μηνύματα
    307
    Εμφανίσεις
    74.673

    Re: Απάντηση: Re: Thomson ST585v6 Firmware Release 7.4.3

    in which menu can somebody find that option? :hmm:

    in DMT and STMT. I had same problem when using it with firmware 7.4.2. Dont know if there is still that problem, because i have "get cpu/mem stats" not activated.
  20. Μηνύματα
    307
    Εμφανίσεις
    74.673

    Re: Thomson ST585v6 Firmware Release 7.4.3

    Uncheck the option "get cpu/mem stats"
  21. Θέμα: Linksys WAG160N

    Από VelleX
    Μηνύματα
    460
    Εμφανίσεις
    123.021

    Re: LINKSYS WAG160N

    WAG160N has a Broadcom chipset, so look if Telnet is accessable, and then try DMT v8 to get line stats
  22. Μηνύματα
    27
    Εμφανίσεις
    5.385

    Re: solution: Πώς βλέπουμε το max attainable rate σε 585 με > 7.x firmware

    Windowskey+R (or start/run)
    cmd
    telnet 192.168.1.254
  23. Μηνύματα
    2
    Εμφανίσεις
    1.376

    Re: Speedtouch585V6 (PSTN) και ρύθμιση για G.DMT

    In telnet/CLI, type

    adsl config opermode multimode

    or for Firmware 6.2+

    adsl config xdsltype adsl
  24. Μηνύματα
    27
    Εμφανίσεις
    5.385

    Re: solution: Πώς βλέπουμε το max attainable rate σε 585 με > 7.x firmware

    its better to login with 2 sessions to telnet. One for the command input, and one for the debug output.

    I also noticed it some month ago, in the firmware v7.
    I wonder why the attainable rate is removed from "adsl info" and also the DSLAM Vendor ID, because its still there


    DATARATE US = 925 kbps; DS = 18143 kbps
    ATTNDR US = 1397 kbps; DS = 23504 kbps
    NM US = 210 dB; DS = 103 dB
    POWER US = 125 dBm; DS = 191 dBm
    ATT US = 83 dB; DS = 130 dB
    OperMode = 200; detailed=1
    TDSL atmTraffic: absRx= 27 absTx= 0 relRx= 0 relTx= 0
    TDSL atmTraffic: currRx= 15 currTx= 0
    CO VendorId= 0xB5 0x00 0x42 0x44 0x43 0x4D 0x61 0x9D :
    CO Ansi VendorId=0x8042 : revNbr=28, stdRev=68
  25. Θέμα: LinkSys WAG200G

    Από VelleX
    Μηνύματα
    1.994
    Εμφανίσεις
    386.360

    Re: LinkSys WAG200G

    yes, and then he would also get 256kbps upstream ^^
    But of course it wont make a real difference.
  26. Μηνύματα
    6
    Εμφανίσεις
    1.845

    [D-Link] Re: d-link και ταχυτητα adsl

    Maybe he could get the Bit allocation by using OrbMT, choosing "Avalanche SAR" in the options.
  27. Μηνύματα
    144
    Εμφανίσεις
    54.394

    Re: DMT tool-Τι σημαινει αυτο?

    @capvag

    I think the gaps are because of your DSLAM with infineon chipset. They are typical for it. Dont know why exactly
  28. Θέμα: DMT tool - help

    Από VelleX
    Μηνύματα
    48
    Εμφανίσεις
    139.199

    Re: DMT tool - help

    did you try dmt v5 or v6 for the zyxel?
  29. Μηνύματα
    1
    Εμφανίσεις
    2.230

    Re: linksys WRT54GL με speedtouch 536

    Do you use your speedtouch at the moment as Router or as Bridge? Because of course you have to set up your speedtouch first as bridge, and then you can connect it to the WAN Port of the Linksys WRT54GL.
    Then You just have to connect your computers via LAN to the WRT54GL.
  30. Μηνύματα
    4
    Εμφανίσεις
    1.420

    Re: STATUS LinkSys WAG200G ειναι ΟΚ

    I dont know what "Αψογος!!!" means, but @tedd

    Of course as i wrote the attenuation is fine, but the SNR Margin is not good for that attenuation. Even its a Annex B connection, he should get more down speed, and a better SNR Margin in upstream.
  31. Μηνύματα
    12
    Εμφανίσεις
    8.384

    Re: LINKSYS WAG200G-EU ή LINKSYS WAG54GS-EU

    I think the WAG54GS has maybe a better ADSL2+ part, because of its Broadcom Chipset, but dont know how the firmware is.
    There were also the ability to change the SNR Margin via telnet, but dont know if telnet is still activated with latest firmwares.

    But there is also a new WAG160N which should be available this soon (april). Its a new n-draft router with Broadcom BCM6358 chipset.
    EDIT: But dont know if there is an Annex A Model.
  32. Μηνύματα
    59
    Εμφανίσεις
    21.569

    Re: Latest firmware 7.4.2 για SpeedTouch 585i V6

    ok, of course at the moment there is only the Firmware for the 5x6 v6 models available, so no firmware for 585 v6 yet.
    So of course you both can't test it, sorry ^^
  33. Μηνύματα
    4
    Εμφανίσεις
    1.420

    Απάντηση: STATUS LinkSys WAG200G ειναι ΟΚ

    Well, your attenuation is very good, but the Downstream/Upstream Margin should be higher with that attenuation.
    Maybe you should try the latest firmware.

    Your download speed is ok. You should get a maximum speed about 1731KB/s
  34. Μηνύματα
    59
    Εμφανίσεις
    21.569

    Απάντηση: Latest firmware 7.4.2 για SpeedTouch 585i V6

    If you already had the 7.4.1 firmware isntalled, you could just test the 7.4.2. If the old config will be imported, there should not be a problem.
  35. Μηνύματα
    6
    Εμφανίσεις
    2.271

    Re: ST 536 v.7.4.1.7 & Μετρήσεις γραμμής...

    @kdao88

    you could mabye optimize your TCP Receive Window to get more download speed. You should get about 2458KB/s with your bitrate and PPPoE. With PPPoA maybe 2472KB/s.
    www.speedguide.net/analyzer.php

    So check how large the RWIN is set, if you have Windows XP
  36. Θέμα: Speedport W500V

    Από VelleX
    Μηνύματα
    6
    Εμφανίσεις
    1.395

    Re: Speedport W500V

    Dein Problem ist wohl eher ein anderes .
    Ist ja klar dass bei ihm kein Browser ne internet seite öffnet, wenn noch nichtmal der Standardgateway bzw der DNS Server eingestellt ist.
    Auf den Router kam er ja aber wohl ohne Probleme.
  37. Μηνύματα
    148
    Εμφανίσεις
    33.612

    Re: Νέο firmware 7.2.0.8 για Speedtouch 5x6/v6

    adsl info expand 1
    xdsl info expand 1
  38. Μηνύματα
    148
    Εμφανίσεις
    33.612

    Re: Νέο firmware 7.2.0.8 για Speedtouch 5x6/v6

    You can get .NET Framework from Microsoft, by Windows Update or from the Homepage.
    And you don't need the 0.7.5 patched version. You can just download the latest STMT version
  39. Μηνύματα
    346
    Εμφανίσεις
    102.355

    Re: Νεο firmware 7.4.1 για SpeedTouch 585i V6

    http://192.168.1.254/cgi/b/dsl/dt/?be=0&l0=1&l1=0
  40. Μηνύματα
    10
    Εμφανίσεις
    2.946

    Re: θόρυβος γραμμής

    Well, maybe the SNR Margin is even higher. I think the speedtouch routers just do not display higher values than 31dB. :)
    And also the tnrasmit power is very low, so with higher transmit power, the SNR Margin would be higher.
  41. Μηνύματα
    10
    Εμφανίσεις
    2.946

    Re: θόρυβος γραμμής

    You have an attenuation of about 4dB! Thats very good, and of course your SNR Margin of 31dB is also very good.
    With ADSL2+ you could get up to 24mbit
  42. Μηνύματα
    5
    Εμφανίσεις
    3.289

    Re: SpeedTouch 585v6 or XXXvX MTU

    i think MTU of 1478 is good for PPPoA/VC-Mux, but not for PPPoE
  43. Μηνύματα
    5
    Εμφανίσεις
    3.817

    Re: LinkSys WAG54GS & DMT (DSL Modem Tool)

    First you have to enable telnet.

    http://192.168.1.1/setup.cgi?todo=debug

    But seems telnet is removed in latest firmware.
  44. Θέμα: LinkSys WAG200G

    Από VelleX
    Μηνύματα
    1.994
    Εμφανίσεις
    386.360

    Re: LinkSys WAG200G

    Well, the 21dBm should be the Downstream Transmit Power, and the 9dBm the upstream.
  45. Μηνύματα
    148
    Εμφανίσεις
    33.612

    Re: Νέο firmware 7.2.0.8 για Speedtouch 5x6/v6

    Is your speedtouch behind a Router? If yes, of course it cant work.
    Or do you have a Firewall?
  46. Μηνύματα
    148
    Εμφανίσεις
    33.612

    Re: Νέο firmware 7.2.0.8 για Speedtouch 5x6/v6

    You need the Upgrade wizard to flash the firmware.
  47. Θέμα: LinkSys WAG200G

    Από VelleX
    Μηνύματα
    1.994
    Εμφανίσεις
    386.360

    Re: LinkSys WAG200G

    And the Transmit power up/down is interchanged.
  48. Μηνύματα
    1
    Εμφανίσεις
    1.290

    Re: Speedtouch 585i v6 to 585 v6

    No, its not. The Firmware for both models is the same. And as far as i know there is a difference in the NVRAM of the speedtouches, but i dont know if it is changeable or if the hardware is completely the same at all.
  49. Μηνύματα
    49
    Εμφανίσεις
    18.987

    Re: Thomson Speedtouch 585v7. Το γνωρίζετε/υπάρχει στην Ελλάδα;

    As far as i know, the Thomson products were always distributed by ISP and supported by them.
    Also in germany only ISP sell them. There are just two shop that sells SpeedTouch Router, but one is only selling Routers branded by different ISP.

    The other sells "retail" Products. But its the only one in germany.
  50. Μηνύματα
    15
    Εμφανίσεις
    12.057

    Re: speedtouch 585 v6 telnet commands

    F is hex for 15, so G is 16, H is 17 and T is 29
Εμφάνιση 1-50 από 125
Σελ. 1 από 3 1 2 3