Σελ. 2 από 61 ΠρώτηΠρώτη 123471222 ... ΤελευταίαΤελευταία
Εμφάνιση 16-30 από 915

Θέμα: Netgear DGN2200

  1. #16
    Εγγραφή
    24-03-2008
    Ηλικία
    41
    Μηνύματα
    744
    Downloads
    3
    Uploads
    0
    Τύπος
    ADSL2+
    Ταχύτητα
    2.800 kbps / 970 kbps
    ISP
    Forthnet
    DSLAM
    Forthnet - ΒΑΡΚΙΖΑ
    Router
    Netgear DGN 2200
    SNR / Attn
    6(dB) / 63(dB)
    Path Level
    Fastpath
    Παράθεση Αρχικό μήνυμα από tsomis Εμφάνιση μηνυμάτων
    Και στα δυο DGN2200\DGN3500
    εχω βαλει το Modfs.
    Φιλε ξέρεις αν υποστηρίζει ARP για να δουλεύω το wake on lan?

  2. #17
    Εγγραφή
    29-03-2006
    Περιοχή
    Athens
    Μηνύματα
    564
    Downloads
    70
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    500Mbit - 500Mbit
    ISP
    Cosmote
    Router
    FritzBox 7590
    Στο 3500 που εχω αυτη τη στιγμη Εχει WOL.
    Νομιζω και το 2200.
    King For A Day,Fool For A Lifetime...

  3. #18
    Εγγραφή
    24-03-2008
    Ηλικία
    41
    Μηνύματα
    744
    Downloads
    3
    Uploads
    0
    Τύπος
    ADSL2+
    Ταχύτητα
    2.800 kbps / 970 kbps
    ISP
    Forthnet
    DSLAM
    Forthnet - ΒΑΡΚΙΖΑ
    Router
    Netgear DGN 2200
    SNR / Attn
    6(dB) / 63(dB)
    Path Level
    Fastpath
    ξέρεις τι παθαίνω ολα λειτουργούν ρολοι δουλεύει κανονικά το wol , οταν κλείσω ώμος το pc και περάσει κάνα τέταρτο , δεν κανει μετα wol αμα το κανω άμεσος αφου το κλείσω κανει. Κάπου διάβασα στο google οτι πρέπει να υποστηρίζει το ρουτερ ARP για να μυην ξεχνάει ποτε την mac address του υπολογιστή που κανεις wol.Δεν βλεπω ομως κατι στο inderface .

  4. #19
    Εγγραφή
    24-03-2008
    Ηλικία
    41
    Μηνύματα
    744
    Downloads
    3
    Uploads
    0
    Τύπος
    ADSL2+
    Ταχύτητα
    2.800 kbps / 970 kbps
    ISP
    Forthnet
    DSLAM
    Forthnet - ΒΑΡΚΙΖΑ
    Router
    Netgear DGN 2200
    SNR / Attn
    6(dB) / 63(dB)
    Path Level
    Fastpath
    προσπάθησα και μεσω telnet μπας και βρω κατι και ειναι κλειδωμένο , μετα απο πολυ ψάξιμο βρήκα εδω http://www.beatjunkie.de/Router_eng.htm αναλυτικό οδηγό , για το πως να ξεκλειδώνεις το τelnet και παω μεχρι το βήμα (10) και βγάζει μαύρη οθόνη στη γραμμή ενολων και δεν μπορεις να γράψεις τιποτα. Καμια ηδέα παιδια , γιατι σαν ρουτερ ειναι παρα πολυ καλο και σταθερό , αλλα στο telnet μας τα χαλάει

  5. #20
    Εγγραφή
    29-03-2006
    Περιοχή
    Athens
    Μηνύματα
    564
    Downloads
    70
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    500Mbit - 500Mbit
    ISP
    Cosmote
    Router
    FritzBox 7590
    Αν εχεις ορεξη διαβασε το http://www.hwupgrade.it/forum/showthread.php?t=2189293
    και το http://www.hwupgrade.it/forum/showthread.php?t=2297494
    ειναι στα Ιταλικα αλλα θα βρεις λυσεις.
    King For A Day,Fool For A Lifetime...

  6. #21
    Εγγραφή
    24-03-2008
    Ηλικία
    41
    Μηνύματα
    744
    Downloads
    3
    Uploads
    0
    Τύπος
    ADSL2+
    Ταχύτητα
    2.800 kbps / 970 kbps
    ISP
    Forthnet
    DSLAM
    Forthnet - ΒΑΡΚΙΖΑ
    Router
    Netgear DGN 2200
    SNR / Attn
    6(dB) / 63(dB)
    Path Level
    Fastpath
    Παράθεση Αρχικό μήνυμα από tsomis Εμφάνιση μηνυμάτων
    Και στα δυο DGN2200\DGN3500
    εχω βαλει το Modfs.
    φιλε μου υπάρχει περίπτωσή αν περάσω αυτο το firmware να μην μπορω να ξαναπεράσω το κανονικό?

  7. #22
    Εγγραφή
    29-03-2006
    Περιοχή
    Athens
    Μηνύματα
    564
    Downloads
    70
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    500Mbit - 500Mbit
    ISP
    Cosmote
    Router
    FritzBox 7590
    Οχι το εχω κανει 20 φορες.
    Αν καταλαβες καλα τρεχει μεσω Usb Flash Stick
    Το οποιο βαζεις επανω στον Router.
    Υπαρχει εκδοση με ενσωματωμενο το Modfs στο Firmware
    και εκδοση που τρεχει μονο απο Usb.
    Οποτε αν δεν θελεις,Δεν βαζεις το πειραγμενο και το τρεχεις απο Usb Stick.
    King For A Day,Fool For A Lifetime...

  8. #23
    Εγγραφή
    14-09-2006
    Περιοχή
    Χαλανδρι
    Μηνύματα
    13
    Downloads
    9
    Uploads
    0
    Τύπος
    ADSL2+
    Ταχύτητα
    8192/1024
    ISP
    ΟΤΕ Conn-x
    DSLAM
    ΟΤΕ - ΧΑΛΑΝΔΡΙ
    Router
    NETGEAR DGN2200
    SNR / Attn
    10(dB) / 42(dB)
    Path Level
    Fastpath
    Παράθεση Αρχικό μήνυμα από tsomis Εμφάνιση μηνυμάτων
    Υπαρχει εκδοση με ενσωματωμενο το Modfs στο Firmware
    Υπαρχει καποιο link για αυτο? Γιατι δεν εχω βρει κατι...

  9. #24
    Εγγραφή
    29-03-2006
    Περιοχή
    Athens
    Μηνύματα
    564
    Downloads
    70
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    500Mbit - 500Mbit
    ISP
    Cosmote
    Router
    FritzBox 7590
    http://sourceforge.net/apps/wordpress/modfs/
    Για το DGN2200 στο τελος της σελιδας.
    http://www.hwupgrade.it/forum/showthread.php?t=2297494
    Ειναι στα Ιταλικα αλλα η πρωτη σελιδα εχει τις οδηγιες.

    (Το usb stick και στις 2 περιπτωσεις χρειαζεται,απλα στην δευτερη
    το βγαζεις απο τη θυρα οποτε θες(Για το DGN2200))
    King For A Day,Fool For A Lifetime...

  10. #25
    Εγγραφή
    24-03-2008
    Ηλικία
    41
    Μηνύματα
    744
    Downloads
    3
    Uploads
    0
    Τύπος
    ADSL2+
    Ταχύτητα
    2.800 kbps / 970 kbps
    ISP
    Forthnet
    DSLAM
    Forthnet - ΒΑΡΚΙΖΑ
    Router
    Netgear DGN 2200
    SNR / Attn
    6(dB) / 63(dB)
    Path Level
    Fastpath
    Παράθεση Αρχικό μήνυμα από tsomis Εμφάνιση μηνυμάτων
    http://sourceforge.net/apps/wordpress/modfs/
    Για το DGN2200 στο τελος της σελιδας.
    http://www.hwupgrade.it/forum/showthread.php?t=2297494
    Ειναι στα Ιταλικα αλλα η πρωτη σελιδα εχει τις οδηγιες.

    (Το usb stick και στις 2 περιπτωσεις χρειαζεται,απλα στην δευτερη
    το βγαζεις απο τη θυρα οποτε θες(Για το DGN2200))
    Συγνώμη φιλε που σε ταλαιπωρώ , διαβασα ολα αυτα που μου είπες δεν τεμπέλιασα απλα παρατήρησα , οτι εχει αρκετές επιλογές τελικά για το dgn 2200 και δεν ξερω τι πρεπει να κατεβάσω απο ολα αυτα. Σε παρακαλώ εσυ που το εχεις βάλει και σε 2000 και σε 2200 πεσμας ποιο κατέβασες δώσε μας ενα link και μερικές οδηγίες Με ενδιαφερει ποιο πολυ για μόνιμο firmware παρα με usb

  11. #26
    Εγγραφή
    29-03-2006
    Περιοχή
    Athens
    Μηνύματα
    564
    Downloads
    70
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    500Mbit - 500Mbit
    ISP
    Cosmote
    Router
    FritzBox 7590
    Αυτο ειναι το Firmware. http://www.mediafire.com/?0ouv5bu58z09e2j
    Αυτο βαζεις στο USB Την πρωτη φορα. http://sourceforge.net/projects/modf...a.zip/download
    -------------------------------------------------------------------------------------------------------------------------
    Modfs su DGN2200 *** aggiornato con firmware 1.0.0.36 ***
    http://www.hwupgrade.it/forum/showpo...61&postcount=2
    -----------------------------------------------------------------------------------------------------------------------
    Translated With Google


    Modfs on DGN2200 also offers these features:
    - Setting of ADSL mode, bitswap and SNR (the changes work without USB memory)
    - Retrain script: try to make it very disturbed stable lines (also works without USB memory)
    - 32 MB swap file
    - PPPoE Relay to turn the router into a modem (works even without USB memory)
    - Button to enable / disable the wifi
    - Additional IP address for LAN interface
    - Change the wifi signal strength up to 70 mW (normally around 40 mW)

    In any case, the web interface configuration will be present only in the presence of Modfs on a USB memory connected to the router.

    How to Install

    To function, Modfs requires that you install a new firmware on DGN2200. And 'possible to download the firmware (version 11.04) from this link. It 'necessary to do a reset to factory settings. The firmware is designed to make the minimum number of changes from the original firmware, the firmware flashed in essence, unchanged through Modfs, behaves identically to the original. The only functional part is touched more deeply the connection, in order to make permanent changes to the SNR and the modulation, but the behavior, no settings, is identical to the original.
    Update the firmware via the web interface of the router. The router takes care of himself to boot, if the progress bar does not move, do not worry, only you have the patience to wait.
    Download the latest file and extract it modfs_image on a FAT32 partition of a USB stick or a hard disk.
    Start the router with the USB memory inserted. After about 60 seconds you can access the web interface configuration:
    Url: http://192.168.0.1:8081/ (replace the address of your router if you have changed)
    Username: admin
    Password: admin
    To change your login go to the Administration.

    It 'now possible to configure all the extra features from the web.
    Access via telnet or SSH is disabled by default, if you are interested enough to enable it through the services. The password is the original web interface of the router, but to Modfs.
    And 'possible to connect a USB hub to the router, but is preferably fed in the presence of self-powered hard drives or many devices.
    To restart the router, if possible, always use the Restart button in the Diagnostics menu of the web interface of the official firmware.
    The USB flash drive that hosts can not be removed by Modfs router on, but just use the reset method written above and remove it within 45 seconds.

    To make the change of SNR Margin is REQUIRED with the new firmware update packages that can be found here: http://www.hwupgrade.it/forum/showpo...64&postcount=4 for the new firmware version, also updated the others in the section "DGN2200" and that "community".


    Making the internet accessible services Modfs (ssh and https)

    The official firmware does not allow you to enter the router's address in a forwarding rule. For this we must specify an additional IP address for the router. Go Modfs -> Setup -> Additional LAN IP Address and enter, for example, 254 and click Save.
    From now on we assume that the additional address is 192.168.0.254. At this point, we will restrict the DHCP service to the address of the router 253, to do this just go to the official firmware interface in Advanced -> LAN Setup and put 253 as the ending address.
    Now you can publish Modfs the various services on the Internet.
    The most interesting services (to be enabled in Modfs -> Services) are:
    - Ssh service, the default port 22
    - Service https by default on port 4443
    Then add a rule in the official firmware and Port Forwarding / Port Triggering (Forward / activation Doors): select Port Forwarding (Port Forwarding), Add Custom Service (Add Service) and specify the service name, such as TCP, the port indicated above for its service, the IP address 192.168.0.254 and apply.

    Changing the default connection, the SNR and retrain script

    And 'possible to access these settings from the Setup menu. These values ​​remain valid even when you restart the router and without USB memory inserted in the router. So if you want to reset the default values ​​need to perform a reset by pressing the small button for 30 seconds, highlighted by the red circle at the bottom of the router. or directly from the web interface of the official firmware.

    Turning the modem router

    A normal things, by activating the PPPoE Relay Modfs -> Setup, selecting in the Basic Settings and Manually Connect PPPoE, the router will turn into a modem.
    Currently however, there is a firmware bug that occurs only in the official ADSL2 / 2 + and that does not allow you to set the connection manually (it is still automatic). To remedy this situation, just select PPPoE Modem Modfs -> Setup. This will still be impossible to establish the connection manually from the router, but you can only carry out broadband connections through a computer or another router.
    This setting will remain permanently on the router, even if started without the USB stick.
    To delete it just do a reset to factory settings.

    Restore the original firmware

    To restore the original firmware just to flash the original firmware from the web interface of the router by following these instructions:
    - Restart the router without key
    - Perform a reset to factory settings by holding down the button for 30 seconds with the router hidden under
    - Flash the original firmware

    Resolution of any problems in starting Modfs

    If you have problems, try first to format the USB stick to FAT32 with this tool.
    If the web interface does not start yet implemented these instructions and paste the output into a post.
    ----------------------------------------------------------------------------------------------------------------------------------
    Αν δεν ξερεις Αγγλικα πες μου να σου τα πω εγω εν συντομια.....
    King For A Day,Fool For A Lifetime...

  12. #27
    Εγγραφή
    24-03-2008
    Ηλικία
    41
    Μηνύματα
    744
    Downloads
    3
    Uploads
    0
    Τύπος
    ADSL2+
    Ταχύτητα
    2.800 kbps / 970 kbps
    ISP
    Forthnet
    DSLAM
    Forthnet - ΒΑΡΚΙΖΑ
    Router
    Netgear DGN 2200
    SNR / Attn
    6(dB) / 63(dB)
    Path Level
    Fastpath
    εντάξει το κατέχω λιγο δεν θελω να σε κουρασω αν κολλήσω καπου αγρια τοτε θα σου πω . φιλε εισαι θεός thanks θα σου πω οταν τα καταφέρω τα αποτελέσματα

    ........Auto merged post: TEO2202 πρόσθεσε 7 λεπτά και 37 δευτερόλεπτα αργότερα ........

    Με λιγα λογια απο οτι καταλαβα κανω upgrate στο μοντεμ το συγκεκριμένο firmware και μετα βαζω σε ενα φλασακι το bin και δινω την custom ip που λεει

    ........Auto merged post: TEO2202 πρόσθεσε 89 λεπτά και 54 δευτερόλεπτα αργότερα ........

    Τα αποτελεσματα εχουν ως εξης . Περασα το firmware με επιτυχία και στο ρουτερ γραφει

    Hardware Version DGN2200
    Firmware Version V1.0.0.36_7.0.36
    GUI Language Version V1.0.0.25

    εβαλα και το αρχειο bin σε ενα φλασακι το εβαλα στο μοντεμ δοκιμασα την ip και στο τελος :8081 αλλα τιποτα δεν ανοίγει την σελιδα , μονο με την κανονική ip του ρουτερ ανοίγει και οχι το φτιαχτό interfase μονο το κανονικό.Δοκιμασα και ρεσταρτ και ρεσταρτ με το φλασακι επανω και reset και διαφορετικό φλασακι τιποτα. Καμια ιδεα? κανω κατι λαθος?
    Τελευταία επεξεργασία από το μέλος TEO2202 : 09-11-11 στις 02:48. Αιτία: auto merged post

  13. #28
    Εγγραφή
    29-03-2006
    Περιοχή
    Athens
    Μηνύματα
    564
    Downloads
    70
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    500Mbit - 500Mbit
    ISP
    Cosmote
    Router
    FritzBox 7590
    Εχεις Την Default IP στο user interface του Router 192.168.0.1
    η την εχεις αλλαξει πχ 192.168.1.1;
    Δινεις 192.168.0.1:8081 η αν την εχεις αλλαξει πχ 192.168.1.1:8081.
    Αν εχεις οντως 192.168.0.1 και δεν κανει τιποτα γραψε να βγαλω το 2200
    απο το κουτι του να σου πω τι κανει σε εμενα.
    Τωρα εχω επανω το 3500 γιατι συγρονιζει καλυτερα σε εμενα.
    King For A Day,Fool For A Lifetime...

  14. #29
    Εγγραφή
    24-03-2008
    Ηλικία
    41
    Μηνύματα
    744
    Downloads
    3
    Uploads
    0
    Τύπος
    ADSL2+
    Ταχύτητα
    2.800 kbps / 970 kbps
    ISP
    Forthnet
    DSLAM
    Forthnet - ΒΑΡΚΙΖΑ
    Router
    Netgear DGN 2200
    SNR / Attn
    6(dB) / 63(dB)
    Path Level
    Fastpath
    την εχω αλαξει σε 192.168.1.1 και βαζω 192.168.1.1:8081 αλλα τιποτα

  15. #30
    Εγγραφή
    24-03-2008
    Ηλικία
    41
    Μηνύματα
    744
    Downloads
    3
    Uploads
    0
    Τύπος
    ADSL2+
    Ταχύτητα
    2.800 kbps / 970 kbps
    ISP
    Forthnet
    DSLAM
    Forthnet - ΒΑΡΚΙΖΑ
    Router
    Netgear DGN 2200
    SNR / Attn
    6(dB) / 63(dB)
    Path Level
    Fastpath
    Παράθεση Αρχικό μήνυμα από tsomis Εμφάνιση μηνυμάτων
    Εχεις Την Default IP στο user interface του Router 192.168.0.1
    η την εχεις αλλαξει πχ 192.168.1.1;
    Δινεις 192.168.0.1:8081 η αν την εχεις αλλαξει πχ 192.168.1.1:8081.
    Αν εχεις οντως 192.168.0.1 και δεν κανει τιποτα γραψε να βγαλω το 2200
    απο το κουτι του να σου πω τι κανει σε εμενα.
    Τωρα εχω επανω το 3500 γιατι συγρονιζει καλυτερα σε εμενα.
    Λοιπόν μετα απο πολυ ψάξιμο το modfs παιζει κανονικα.
    Τελευταία επεξεργασία από το μέλος TEO2202 : 09-11-11 στις 22:17.

Σελ. 2 από 61 ΠρώτηΠρώτη 123471222 ... ΤελευταίαΤελευταία

Παρόμοια Θέματα

  1. [Netgear] Netgear DGN2200
    Από Zangetsu στο φόρουμ ADSL & Broadband Hardware, routers και modems...
    Μηνύματα: 4
    Τελευταίο Μήνυμα: 10-05-12, 08:57
  2. πωλείται router Netgear DGN2200
    Από TEO2202 στο φόρουμ Προσφορά - Ανενεργές Αγγελίες
    Μηνύματα: 3
    Τελευταίο Μήνυμα: 10-11-11, 12:07
  3. Τι γινετε με netgear DGN2200 ?
    Από cinemusic στο φόρουμ Wind
    Μηνύματα: 1
    Τελευταίο Μήνυμα: 10-03-11, 10:04
  4. [Netgear] Asus DSL-N13 vs Netgear DGN2200
    Από Thansevi στο φόρουμ ADSL & Broadband Hardware, routers και modems...
    Μηνύματα: 2
    Τελευταίο Μήνυμα: 09-11-10, 09:59

Bookmarks

Bookmarks

Δικαιώματα - Επιλογές

  • Δεν μπορείτε να δημοσιεύσετε νέα θέματα
  • Δεν μπορείτε να δημοσιεύσετε νέα μηνύματα
  • Δεν μπορείτε να αναρτήσετε συνημμένα
  • Δεν μπορείτε να επεξεργαστείτε τα μηνύματα σας
  •  
  • Τα BB code είναι σε λειτουργία
  • Τα Smilies είναι σε λειτουργία
  • Το [IMG] είναι σε λειτουργία
  • Το [VIDEO] είναι σε λειτουργία
  • Το HTML είναι εκτός λειτουργίας