Μου έχουν χαλάσει τα ηχεία (μάλλον το jack που συνδέει τα 2 στο woofer) και παίζει μόνο το ένα κανάλι. Έχω από παλιά κι ένα αρχειάκι mp3 που στο ένα κανάλι παίζει "τα παπάκια" και στο άλλο το "fear of the dark" για να τεστάρω.
Όταν δίνω χειροκίνητα τις εντολές για να συγχωνευθούν τα 2 κανάλια του stereo σε ένα κανάλι mono, και το αλλάζω από το pavucontrol παίζει μια χαρά. Όταν την ίδια εντολή την καταχωρώ στο /etc/pulse/default.pa και κάνω restart το pavucontrol μου λέει cannot connect to the server.
Σας περιγράφω τι κάνω για να μου πείτε αν εντοπίζεται κάποιο λάθος:
παίρνω το κάτω sink που ξέρω ότι είναι αυτό που παίζει και δίνωΚώδικας:$ pacmd list-sinks | grep name: name: <alsa_output.pci-0000_05_00.1.hdmi-stereo> name: <alsa_output.pci-0000_00_14.2.analog-stereo>
Πράγματι, στο pavucontrol, στο Output Devices εμφανίζεται επιπλέον καταχώρηση "Remapped: sink bla bla bla mono". Αν επιλέξω αυτό, τότε ακούω μια χαρά ΟΛΟΝ τον ήχο μονοκάναλα. Αλλά θέλει την ίδια διαδικασία μετά από κάθε reboot.Κώδικας:$ pacmd load-module module-remap-sink sink_name=mono master=alsa_output.pci-0000_00_14.2.analog-stereo channels=2 channel_map=mono,mono
Θεωρητικά, αν έβαζα την εντολήστο /etc/pulse/default.pa κάπως έτσι:Κώδικας:load-module module-remap-sink sink_name=mono master=alsa_output.pci-0000_00_14.2.analog-stereo channels=2 channel_map=mono,mono
θα έπρεπε μετά από κάθε restart να παίζει μονοκάναλα. Ωστόσο, όχι μόνο δεν παίζει μονοκάναλα. ΔΕΝ ΠΑΙΖΕΙ ΚΑΘΛΟΥΚώδικας:#!/usr/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software Foundation, # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. # This startup script is used only if PulseAudio is started per-user # (i.e. not in system mode) #remap sink stereo to mono load-module module-remap-sink sink_name=mono master=alsa_output.pci-0000_00_14.2.analog-stereo channels=2 channel_map=mono,mono .nofail ### Load something into the sample cache #load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav #load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav #load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav #load-sample-lazy pulse-access /usr/share/sounds/generic.wav .fail ### Automatically restore the volume of streams and devices load-module module-device-restore load-module module-stream-restore load-module module-card-restore ### Automatically augment property information from .desktop files ### stored in /usr/share/application load-module module-augment-properties ### Should be after module-*-restore but before module-*-detect load-module module-switch-on-port-available ### Load audio drivers statically ### (it's probably better to not load these drivers manually, but instead ### use module-udev-detect -- see below -- for doing this automatically) #load-module module-alsa-sink #load-module module-alsa-source device=hw:1,0 #load-module module-oss device="/dev/dsp" sink_name=output source_name=input #load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input #load-module module-null-sink #load-module module-pipe-sink ### Automatically load driver modules depending on the hardware available .ifexists module-udev-detect.so load-module module-udev-detect .else ### Use the static hardware detection module (for systems that lack udev support) load-module module-detect .endif ### Automatically connect sink and source if JACK server is present .ifexists module-jackdbus-detect.so .nofail load-module module-jackdbus-detect channels=2 .fail .endif ### Automatically load driver modules for Bluetooth hardware .ifexists module-bluetooth-policy.so load-module module-bluetooth-policy .endif .ifexists module-bluetooth-discover.so load-module module-bluetooth-discover .endif ### Load several protocols .ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix .endif load-module module-native-protocol-unix ### Network access (may be configured with paprefs, so leave this commented ### here if you plan to use paprefs) #load-module module-esound-protocol-tcp #load-module module-native-protocol-tcp #load-module module-zeroconf-publish ### Load the RTP receiver module (also configured via paprefs, see above) #load-module module-rtp-recv ### Load the RTP sender module (also configured via paprefs, see above) #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" #load-module module-rtp-send source=rtp.monitor ### Load additional modules from GConf settings. This can be configured with the paprefs tool. ### Please keep in mind that the modules configured by paprefs might conflict with manually ### loaded modules. .ifexists module-gconf.so .nofail load-module module-gconf .fail .endif ### Automatically restore the default sink/source when changed by the user ### during runtime ### NOTE: This should be loaded as early as possible so that subsequent modules ### that look up the default sink/source get the right value load-module module-default-device-restore ### Automatically move streams to the default sink if the sink they are ### connected to dies, similar for sources load-module module-rescue-streams ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Honour intended role device property load-module module-intended-roles ### Automatically suspend sinks/sources that become idle for too long load-module module-suspend-on-idle ### If autoexit on idle is enabled we want to make sure we only quit ### when no local session needs us anymore. .ifexists module-console-kit.so load-module module-console-kit .endif .ifexists module-systemd-login.so load-module module-systemd-login .endif ### Enable positioned event sounds load-module module-position-event-sounds ### Cork music/video streams when a phone stream is active load-module module-role-cork ### Modules to allow autoloading of filters (such as echo cancellation) ### on demand. module-filter-heuristics tries to determine what filters ### make sense, and module-filter-apply does the heavy-lifting of ### loading modules and rerouting streams. load-module module-filter-heuristics load-module module-filter-apply # X11 modules should not be started from default.pa so that one daemon # can be shared by multiple sessions. ### Load X11 bell module #load-module module-x11-bell sample=bell-windowing-system ### Register ourselves in the X11 session manager #load-module module-x11-xsmp ### Publish connection data in the X11 root window #.ifexists module-x11-publish.so #.nofail #load-module module-x11-publish #.fail #.endif ### Make some devices default #set-default-sink output #set-default-source input
Κάνω κάτι λάθος;
Εμφάνιση 1-3 από 3
-
23-01-17, 01:10 Pulseaudio: συγχώνευση καναλιών stereo σε mono #1
-
23-01-17, 03:57 Απάντηση: Pulseaudio: συγχώνευση καναλιών stereo σε mono #2
1ον, την εντολή για το load-module θα τη βάλεις στο τέλος του αρχείου, όχι στην αρχή. Πολύ σημαντικό.
2ον, αμέσως από κάτω θα βάλεις:
Κώδικας:set-default-sink mono
-
23-01-17, 12:07 Απάντηση: Pulseaudio: συγχώνευση καναλιών stereo σε mono #3
Αυτό ήταν! Σε ευχαριστώ πολύ. Ήταν όντως σημαντικό να μπει στο τέλος του αρχείου η καταχώρηση.
hint για όσους αντιμετωπίσουν παρόμοιο πρόβλημα στο μέλλον: για να δουλεύει σωστά το volume-applet του panel στο γραφικό περιβάλλον που χρησιμοποιεί ο καθένας πρέπει να οριστεί από τα properties, το applet να αντιστοιχεί στο remaped κανάλι.
Ευχαριστώ πολύ! Με ταλαιπωρούσε μέρες τώρα.
Παρόμοια Θέματα
-
Nova: αναβάθμιση καναλιών σε HD δωρεάν για όλους τους συνδρομητές της
Από nnn στο φόρουμ ΕιδήσειςΜηνύματα: 28Τελευταίο Μήνυμα: 19-08-16, 17:13 -
Μετατροπή των καναλιών voip ενός αριθμού σε ξεχωριστές γραμμές κανονικού τηλεφώνου
Από agos στο φόρουμ Voice over IP (VoIP) Sip/Iax HardwareΜηνύματα: 9Τελευταίο Μήνυμα: 26-07-16, 23:51 -
LENOVO 100-15IBY N2840/4G/500GB Πρόβλημα ήχου, mono sound
Από thourios στο φόρουμ Laptop, tablet και mobile computingΜηνύματα: 8Τελευταίο Μήνυμα: 23-07-16, 13:09 -
Δε δουλεύει το mic σε debian stable με pulseaudio
Από paris1871 στο φόρουμ Unix - LinuxΜηνύματα: 0Τελευταίο Μήνυμα: 23-03-16, 01:35 -
Συγχώνευση των Sony Computer και Sony Network Entertaiment σε μια εταιρία την 1η Απριλίου
Από nnn στο φόρουμ ΕιδήσειςΜηνύματα: 0Τελευταίο Μήνυμα: 26-01-16, 14:02
Bookmarks