PDA

Επιστροφή στο Forum : Mikrotik ROS RC version συζητήσεις-bugs κτλ.



Σελίδες : [1] 2 3

Nikiforos
15-03-18, 13:20
Καλημέρα! κάνω αυτό το θέμα σε συνέχεια του γενικού για το ROS (https://www.adslgr.com/forum/threads/999728-Περί-ROS-ο-λόγος/page11)προκειμένου να μην γεμίζουμε το θέμα εκεί με τις εκδόσεις της RC αλλά και με τυχόν bugs αλλά και με τα νέα και ωραία features της!
Θα παρακαλέσω το θέμα να μείνει καθαρά ΜΟΝΟ για RC και όχι συγκρίσεις και VS με τις άλλες εκδόσεις.

Εγώ την έχω βάλει σε αυτό : https://mikrotik.com/product/RB711-5Hn έχει καμμένη wlan οπότε είναι για δοκιμές.
Και χτες μπήκε και στο ιντερνετ ρουτερ μου και θα παραμείνει μέχρι σοβαρών bugs : https://mikrotik.com/product/CRS109-8G-1S-2HnD-IN

Βάζω και τα changelogs από τις τελευταίες εκδόσεις της :

What's new in 6.42rc43 (2018-Mar-14 10:45):

!) tile - improved overall system performance and stability ("/system routerboard upgrade" required);
*) crs326 - fixed known multicast flooding to the CPU;
*) dhcp - improved DHCP service reliability when it is configured on bridge interface;
*) ssh - generate SSH keys only on the first connect attempt instead of the first boot;
*) ups - improved disconnect message handling between RouterOS and UPS;
*) wireless - enable all chains by default on devices without external antennas after configuration reset;

Other changes since 6.41.3:

*) bridge - added host aging timer for crs3xx and Atheros hw-bridges;
*) bridge - added per-port forwarding options for broadcasts, unknown-multicasts and unknown-unicasts (CLI only);
*) bridge - added per-port learning options (CLI only);
*) bridge - added support for static hosts;
*) bridge - fixed bridge port interface parameter under "/interface bridge host print detail";
*) bridge - fixed false MAC address learning on hAP ac2 and cAP ac devices;
*) bridge - fixed incorrect "fast-forward" enabling when ports were switched;
*) bridge - fixed MAC learning for VRRP interfaces on bridge;
*) bridge - fixed reliability on software bridges when used on devices without switch chip;
*) bridge - hide options for disabled bridge features in CLI;
*) bridge - show "hw" flags only on Ethernet interfaces and interface lists;
*) capsman - added "allow-signal-out-of-range" option for Access List entries;
*) capsman - added support for "interface-list" in Access List and Datapath entries;
*) capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
*) capsman - log "signal-strength" when successfully connected to AP;
*) certificate - added PKCS#10 version check;
*) certificate - dropped DES support and added AES instead for SCEP;
*) certificate - dropped MD5 support and require SHA1 as minimum for SCEP;
*) chr - added "open-vm-tools" on VMware installations;
*) chr - added "qemu-guest-agent" and "virtio-scsi" driver on KVM installations;
*) chr - added "xe-daemon" on Xen installations;
*) chr - added support for Hyper-V ballooning, guest quiescing, host-guest file transfer, integration services and static IP injection;
*) chr - added support for NIC hot-plug on VMware and Xen installations;
*) chr - fixed additional disk detaching on Xen installations;
*) chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
*) chr - fixed suspend on Xen installations;
*) chr - make additional disks visible under "/disk" on Xen installations;
*) chr - make virtio disks visible under "/disk" on KVM installations;
*) console - fixed "idpr-cmtp" protocol by changing its value from 39 to 38;
*) console - improved console stability after it has not been used for a long time;
*) crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
*) crs212 - fixed Ethernet boot through CRS326 devices;
*) crs3xx - added initial “hw-offload” support for 802.3ad and “balance-xor” bonding;
*) crs3xx - added switch port "storm-rate" limiting options;
*) detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced in v6.41);
*) dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
*) dhcpv6 - make sure that time is set before restoring bindings;
*) dhcpv6-client - added info exchange support;
*) dhcpv6-client - added possibility to specify options;
*) dhcpv6-client - added support for options 15 and 16;
*) dhcpv6-client - implement confirm after reboot;
*) dhcpv6-server - added DHCPv4 style user options;
*) email - set maximum number of sessions to 100;
*) fetch - added "http-content-type" option to allow setting MIME type of the data in free text form;
*) fetch - added "output" option for all modes in order to return result to file, variable or ignore it;
*) fetch - increased maximum number of sessions to 100;
*) filesystem - implemented additional system storage maintenance checks on ARM CPU based devices;
*) flashfig - properly apply configuration provided by Flashfig;
*) gps - improved NMEA sentence handling;
*) health - log warning when switching between redundant power supplies;
*) hotspot - improved HTTPS matching in Walled Garden rules;
*) ike1 - display error message when peer requests "mode-config" when it is not configured;
*) ike1 - do not accept "mode-config" reply more than once;
*) ike1 - fixed wildcard policy lookup on responder;
*) interface - improved interface configuration responsiveness;
*) ippool - added ability to specify comment;
*) ipsec - fixed AES-CTR and AES-GCM support on RB1200;
*) ipsec - improved single tunnel hardware acceleration performance on MMIPS platform devices;
*) ipsec - properly detect interface for "mode-config" client IP address assignment;
*) kidcontrol - initial work on "/ip kid-control" feature;
*) lte - added initial support for SIM7600 LTE modem interface;
*) lte - added support for the user and password authentication for wAP-LTE-kit-US (R11e-LTE-US);
*) lte - do not add DHCP client on LTE modems that doesn't use DHCP;
*) lte - fixed DHCP client adding for MF823 modem;
*) mac-ping - fixed duplicate responses;
*) modem - added initial support for AC340U;
*) netwatch - limit to read, write, test and reboot policies for Netwatch script execution;
*) poe - hide PoE related properties on interfaces which does not provide power output;
*) poe-out - do not show "poe-out-current" on devices which can not determine it;
*) ppp - added initial support for NETGEAR AC340U and ZyXEL WAH1604;
*) ppp - allow to override remote user PPP profile via "Mikrotik-Group";
*) quickset - fixed NAT if PPPoE client is used for Internet access;
*) quickset - properly detect LTE interface on startup;
*) quickset - show "G" flag for guest users;
*) r11e-lte - improved LTE connection initialization process;
*) routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required);
*) sniffer - fixed situation when "/tool sniffer packet" returned packets in incorrect order;
*) snmp - added "/caps-man interface print oid";
*) snmp - added "/interface w60g print oid";
*) snmp - added "board-name" OID;
*) snmp - improved request processing performance for wireless and CAP interfaces;
*) ssh - improved key import error messages;
*) ssh - remove imported public SSH keys when their owner user is removed;
*) switch - hide "ingress-rate" and "egress-rate" for non-crs3xx switches;
*) tile - added "aes-ctr" hardware acceleration support;
*) tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
*) tr069-client - correctly return “TransferComplete” after vendor configuration file transfer;
*) tr069-client - fixed "/tool fetch" commands executed with ".alter" script;
*) tr069-client - fixed HTTPS authentication process;
*) upgrade - improved RouterOS upgrade process and restrict upgrade from RouterOS older than v5.16;
*) userman - added support for ARM and MMIPS platform;
*) winbox - added "antenna" setting under GPS settings for MIPS platform devices;
*) winbox - added "crl-store" setting to certficate settings;
*) winbox - added "insert-queue-before" to DHCP server;
*) winbox - added 160 MHz "channel-width" to wireless settings;
*) winbox - added broadcast and flood settings to bridge ports;
*) winbox - added DHCPv6 client info request type and updated statuses;
*) winbox - added missing protocol numbers to IPv4 and IPv6 firewall;
*) winbox - added possibility to delete SMS from inbox;
*) winbox - allow to comment new object without committing it;
*) winbox - allow to open bridge host entry;
*) winbox - fixed name for "out-bridge-list" parameter under bridge firewall rules;
*) winbox - fixed typo from "UPtime" to "Uptime";
*) winbox - fixed Winbox closing when viewing graph which does not contain any data;
*) winbox - improved stability when using trackpad scrolling in large lists;
*) winbox - made UDP local and remote TX size parameter optional in Bandwidth Test tool;
*) winbox - moved "ageing-time" setting from STP to General tab;
*) winbox - removed “VLAN” section from “Switch” menu for CRS3xx devices;
*) winbox - show Bridge Port PVID column by default;
*) winbox - show CQI in LTE info;
*) winbox - show only master CAP interfaces under CAPsMAN wireless scan tool;
*) wireless - added "realm-raw" setting for "/interface wireless interworking-profiles" (CLI only);
*) wireless - added initial support for "nstreme-plus";
*) wireless - added support for "band=5ghz-n/ac";
*) wireless - added support for "interface-list" for Access List entries;
*) wireless - added support for legacy AR9485 chipset;
*) wireless - fixed "wds-slave" channel selection when single frequency is specified;
*) wireless - fixed incompatibility with macOS clients;
*) wireless - fixed long "scan-list" entries not working for ARM based wireless interfaces;
*) wireless - fixed nv2 protocol on ARM platform SXTsq devices;
*) wireless - fixed RTS/CTS option for the ARM based wireless devices;
*) wireless - improved compatibility with specific wireless AC standard clients;
*) wireless - improved packet processing on ARM platform devices;
*) wireless - improved wireless scan functionality;
*) wireless - improved wireless stability on hAP ac2 devices while USB is being used;

Περισσσότερα και παλιότερα Changelogs από παλιότερες εκδόσεις της RC εδώ : https://mikrotik.com/download/changelogs/release-candidate-release-tree

Y.Γ σορρυ αλλα τα ειχα με CODE και δεν εμφανιζοταν το ποστ μονο η πρωτη σειρα!!! οποτε ΑΝΑΓΚΑΣΤΙΚΑ κανω edit...

deniSun
15-03-18, 15:39
What's new in 6.42rc43 (2018-Mar-14 10:45)
Το changelog το έχω στο κεντρικό θέμα για ROS.

sdikr
15-03-18, 17:51
What's new in 6.42rc43 (2018-Mar-14 10:45)
Το changelog το έχω στο κεντρικό θέμα για ROS.

Endless loop;

:p

Nikiforos
15-03-18, 18:42
Καλησπέρα, ενημερωθηκε το αρχικο ποστ, καθως ειχα βαλει #code και για καποιον λογο που δεν ξερω εμφανιζε μονο την πρωτη προταση!!! το εβλεπα μονο αν πατουσα edit και μετα ξανα υποβολη! και οταν ανοιγα τον browser παλι ελειπαν ολα! ετσι οποιος διαβασε το αρχικο ποστ απο το πρωι δεν εβλεπε αυτα ολα που ειχα γραψει!
οποτε εκει εχω και το changelog της νεας RC.
Ξαναλεω οτι εγω ΜΟΝΟ εδω θα γραφω για την RC ΚΑΙ τα changelogs, γιαυτο ανοιξα το θεμα...

deniSun
15-03-18, 21:24
Καλησπέρα, ενημερωθηκε το αρχικο ποστ, καθως ειχα βαλει #code και για καποιον λογο που δεν ξερω εμφανιζε μονο την πρωτη προταση!!! το εβλεπα μονο αν πατουσα edit και μετα ξανα υποβολη! και οταν ανοιγα τον browser παλι ελειπαν ολα! ετσι οποιος διαβασε το αρχικο ποστ απο το πρωι δεν εβλεπε αυτα ολα που ειχα γραψει!
οποτε εκει εχω και το changelog της νεας RC.
Ξαναλεω οτι εγω ΜΟΝΟ εδω θα γραφω για την RC ΚΑΙ τα changelogs, γιαυτο ανοιξα το θεμα...

Μη βαράς...
Κανένα πρόβλημα.
Θα γράφουμε εδώ για τις rc.

Nikiforos
20-03-18, 13:09
καλημέρα!
επιτελους νεα εκδοση! αργησαν....



What's new in 6.42rc46 (2018-Mar-20 05:53):

*) dhcp - improved DHCP service reliability when it is configured on bridge interface;
*) dhcp - reduced resource usage of DHCP services;
*) netinstall - sign Netinstall executable with an Extended Validation Code Signing Certificate;
*) quickset - by default use "/24" subnet for local network;
*) quickset - properly detect IP address when one of the bridge modes is used;
*) routerboot - fixed RouterBOOT upgrade process (introduced in v6.42rc);
*) winbox - added "use-dn" setting in OSPF instance General menu;
*) winbox - moved OSPF instance "routing-table" setting in OSPF instance General menu;
*) winbox - use proper graph name for HDD graphs;
*) wireless - improved Nv2 PtMP performance;

deniSun
21-03-18, 18:58
6.42rc48 changelog:

*) health - fixed empty measurements on CRS328-24P-4S+RM;
*) led - removed unused "link-act-led" trigger for devices which does not use it;
*) ups - improved communication between router and UPS;
*) wireless - improved Nv2 PtMP performance;
Για να μην βαριέσαι...

- - - Updated - - -

Και άλλη μία (δύο σε μια μέρα).
Αφού ήθελες rc... κάτσε και πέρνα... :rolleyes: :lol:

6.42rc49 changelog:

*) w60g/Wireless-Wire - increased supported distance for wAP 60G to 200+ meters;

Nikiforos
21-03-18, 22:57
η rc47 τι εγινε την εφαγε η μαρμαγκα? και αλλες φορες εχουν "πηδηξει" νουμερα....
εκτος αυτου για αυτη την μικρη διαφορα που δεν εχει και σημασια καν, δεν την περναω στο 109 τουλαχιστον.
Στο 711 τα βαζω ολα.
Και καθε φορα θελει και το firmware.
Στο 109 ειναι λιγο βαρετο γιατι εκτος οτι ριχνει το ιντερνετ το εχω και σαν switch οποτε οτι ειναι πανω κοβεται και μεσα σε αυτα ειναι και το voip γιατι ειναι πανω και ο nas (asterisk) και το spa 3102.
Ευτυχως ειναι γρηγορο και τα κανει ολα σφαιρα γιατι το 711 ειναι χελονα μπροστα του...
μεχρι στιγμης ολα καλα και στα 2 μηχανηματα, φυσαει η RC απλα....:oneup:

deniSun
22-03-18, 00:02
η rc47 τι εγινε την εφαγε η μαρμαγκα? και αλλες φορες εχουν "πηδηξει" νουμερα....
εκτος αυτου για αυτη την μικρη διαφορα που δεν εχει και σημασια καν, δεν την περναω στο 109 τουλαχιστον.
Στο 711 τα βαζω ολα.
Και καθε φορα θελει και το firmware.
Στο 109 ειναι λιγο βαρετο γιατι εκτος οτι ριχνει το ιντερνετ το εχω και σαν switch οποτε οτι ειναι πανω κοβεται και μεσα σε αυτα ειναι και το voip γιατι ειναι πανω και ο nas (asterisk) και το spa 3102.
Ευτυχως ειναι γρηγορο και τα κανει ολα σφαιρα γιατι το 711 ειναι χελονα μπροστα του...
μεχρι στιγμης ολα καλα και στα 2 μηχανηματα, φυσαει η RC απλα....:oneup:

Απ ότι έχω καταλάβει δεν τις "πηδάνε"
απλά μπορεί η νέα να βγει σε πολύ σύντομο χρονικό διάστημα
με αμελητέο fix και γι αυτό να περνάνε στην επόμενη.

Nikiforos
22-03-18, 07:17
Απ ότι έχω καταλάβει δεν τις "πηδάνε"
απλά μπορεί η νέα να βγει σε πολύ σύντομο χρονικό διάστημα
με αμελητέο fix και γι αυτό να περνάνε στην επόμενη.

καλημέρα, εννοουσα μονο για τα νουμερα όχι τι κανει η κάθε μια από θεμα προγραμματισμου.
Θα μπορούσανε καλλιστα να περιμενουν παραπανω να πανε στην άλλη με σωστο νουμερο στην σειρα.

deniSun
22-03-18, 09:52
καλημέρα, εννοουσα μονο για τα νουμερα όχι τι κανει η κάθε μια από θεμα προγραμματισμου.
Θα μπορούσανε καλλιστα να περιμενουν παραπανω να πανε στην άλλη με σωστο νουμερο στην σειρα.

Και εγώ για τα νούμερα σου είπα.

Nikiforos
22-03-18, 12:07
Και εγώ για τα νούμερα σου είπα.

όχι ειπες για fix, δεν εννοω αυτό εγω, αλλα δεν πειραζει αστο.
λεω να μην το κανουν δλδ και να πανε μετα μαζι με αλλα πραγματα και να εχει το σωστο νουμερο, καταλαβες?

deniSun
22-03-18, 12:22
Βγαίνει πχ η 42 στις 10:00 και προκύπτει ένα bug το οποίο λύνουν στις 11:00 στην 43.
Μετά από λίγο στις 12:00 άλλο ένα.
Οπότε αποφασίζουν να μην βγάλουν την 43 αλλά να πάνε απευθείας στην 44.
Αυτό είπα.

Nikiforos
22-03-18, 14:22
Βγαίνει πχ η 42 στις 10:00 και προκύπτει ένα bug το οποίο λύνουν στις 11:00 στην 43.
Μετά από λίγο στις 12:00 άλλο ένα.
Οπότε αποφασίζουν να μην βγάλουν την 43 αλλά να πάνε απευθείας στην 44.
Αυτό είπα.

δεν καταλαβαίνω τιποτα, αλλα οκ...:oneup: απλα λογικη να μην πω η Mikrotik το γνωστο....

deniSun
27-03-18, 13:40
6.42rc52 changelog:

*) bridge - fixed "master-port" configuration conversion from pre-v6.41 RouterOS versions (introduced in 6.42rc);
*) certificate - fixed incorrect SCEP URL after an upgrade;
*) chr - added support for "multi-queue" feature for "virtio-net" driver;
*) chr - added support for Amazon Elastic Network Adapter (ENA) driver;
*) chr - added support for booting from NVMe disks;
*) chr - fixed interface matching by name on VMware installations;
*) chr - run startup scripts also on the first boot on AWS and Google Cloud installations;
*) crs3xx - added initial “hw-offload” support for 802.3ad and “balance-xor” bonding;
*) led - fixed unused "link-act-led" LED trigger on RBLHG 2nD, RBLHG 2nD-XL and RBSXTsq 2nD;
*) lte - added initial support for Quectel LTE EP06-E;
*) lte - fixed LTE band setting for SXT LTE;
*) routerboard - properly detect hAP ac^2 RAM size;
*) ssh - fixed SSH service becoming unavailable;
*) traffic-flow - fixed IPv6 destination address value when IPFIX protocol is used;
*) watchdog - retry to send "autosupout.rif" file to an e-mail if initial delivery failed up to 3 times within 20 second interval;

Nikiforos
27-03-18, 16:36
καλησπέρα!
αναβαθμισα ηδη εννοειτε! το 109 και 711 και το firmware φυσικα, ολα καλα...
καλα Deni μηπως εισαι κρυφοΑΡΣΙακας και μας το κρυβεις???? :lol:
ή κοιτας την σελιδα συνεχεια?
χτες κοιταξα καποια στιγμη και δεν ειχε βγει....

deniSun
27-03-18, 18:06
καλησπέρα!
αναβαθμισα ηδη εννοειτε! το 109 και 711 και το firmware φυσικα, ολα καλα...
καλα Deni μηπως εισαι κρυφοΑΡΣΙακας και μας το κρυβεις???? :lol:
ή κοιτας την σελιδα συνεχεια?
χτες κοιταξα καποια στιγμη και δεν ειχε βγει....

Με αποκάλυψες...

Nikiforos
27-03-18, 18:14
Με αποκάλυψες...

εμ βλεπεις τα ηξερα εγω....:p
παλι ομως πηδηχταν νουμερα οπως το ελεγες θα ειναι φαινεται, γιαυτο κανει μερες να βγει αλλη, βαρεθηκα να περιμενω αναβαθμιση, ελεος δλδ! :twisted:
στο τελος χομπι θα γινει! ΑΧΧΑΧΑΧΑΧΑΑΧ :rofl:

Nikiforos
09-04-18, 15:56
What's new in 6.42rc56 (2018-Apr-09 08:18):

*) crs3xx - added initial “hw-offload” support for 802.3ad and “balance-xor” bonding;
*) dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
*) dns - do not generate "Undo" messages on changes to dynamic servers;
*) ike2 - fixed framed IP address received from RADIUS server;
*) ippool6 - added pool name to "no more addresses left" error message;
*) ipv6 - fixed IPv6 behavior when slave leaves bridge;
*) ipv6 - update IPv6 DNS from RA only when it is changed;
*) led - added "Dark Mode" support for wAP 60G;
*) led - added w60g alignment trigger;
*) rb1100ahx4 - improved reliability on hardware encryption;
*) w60g - added "tx-power" setting (CLI only);
*) w60g - added RSSI information (CLI only);
*) w60g - added TX sector alignment information (CLI only);
*) winbox - fixed Neighbor Discovery and MAC Winbox (introduced in v6.42rc);
*) wireless - fixed RB911-5HnD low transmit power issue;
*) wireless - fixed wsAP wrong 5 GHz interface MAC address;

deniSun
20-04-18, 14:19
6.43rc3 changelog:

*) bridge - fixed hardware offloading for MMIPS and PPC devices;
*) bridge - fixed LLDP packet receiving;
*) certificate - add "expires-after" parameter (CLI only);
*) chr - added checksum offload support for Hyper-V installations;
*) chr - added large send offload support for Hyper-V installations;
*) chr - added multiqueue support on Xen installations;
*) chr - added support for multiqueue feature on "virtio-net";
*) chr - added virtual Receive Side Scaling support for Hyper-V installations;
*) chr - do not show IRQ entries from removed devices;
*) chr - fixed NIC hotplug for "virtio-net";
*) chr - improved boot time for Hyper-V installations;
*) crs317 - fixed link flapping when inserted S+RJ10 module without any cable;
*) crs3xx - fixed failing connections through bonding in bridge;
*) ike2 - use "policy-template-group" parameter when picking proposal as initiator;
*) ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations (CLI only);
*) ipsec - added "src-address-list" parameter for "mode-config" that generates dynamic "src-nat" rule (CLI only);
*) ipsec - added warning messages for incorrect peer configuration;
*) ipsec - do not allow removal of "proposal" and "mode-config" entries that are in use;
*) ipsec - separate phase1 proposal configuration from peer menu (CLI only);
*) led - added "dark-mode" functionality for hAP ac and hAP ac^2 devices;
*) led - improved w60g alignment trigger;
*) log - show interface name on OSPF "different MTU" info log messages;
*) lte - added extended LTE signal info for SIM7600 modules;
*) lte - allow to send "at-chat" command over disabled LTE interface;
*) lte - allow to use multiple PLS modems at the same time;
*) lte - expose GPS channel for PLS modems;
*) lte - fixed SIM7600 registration info;
*) routerboard - allow to fill up to half of the RAM memory with files on devices with FLASH storage;
*) routerboard - fixed "mode-button" support on hAP lite r2 devices;
*) w60g - allow to manually set "tx-sector" value;
*) w60g - fixed incorrect RSSI readings;
*) w60g - show phy rate on "/interface w60g monitor" (CLI only);
*) winbox - added bridge Fast Forward statistics counters;
*) winbox - allow to specify "any" as wireless "access-list" interface;
*) winbox - fixed "/ip dhcp-server network set dns-none" parameter;
*) winbox - fixed bridge port MAC learning parameter values;
*) winbox - show "Switch" menu on cAP ac devices;
*) winbox - show correct "Switch" menus on CRS328-24P-4S+;
*) wireless - enable all chains by default on devices without external antennas after configuration reset;
*) wireless - improved compatibility with BCM devices;

deniSun
23-04-18, 15:14
6.43rc4 changelog:

*) bridge - added ingress filtering options to bridge interface (CLI only);
*) bridge - fixed dynamic VLAN table entries when using ingress filtering;
*) crs317 - fixed link flapping when inserted S+RJ10 module without any cable;
*) ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations (CLI only);
*) ipsec - added "src-address-list" parameter for "mode-config" that generates dynamic "src-nat" rule (CLI only);
*) ipsec - install all DNS server addresses provided by "mode-config" server;
*) winbox - fixed "/ip dhcp-server network set dns-none" parameter;
*) winbox - show "Switch" menu on hAP ac^2 devices;
*) winbox - show HT MCS tab when "5ghz-n/ac" band is used;

deniSun
26-04-18, 12:56
6.43rc5 changelog:


*) ipsec - fixed policies becoming invalid if added after a disabled policy;
*) led - added "dark-mode" functionality for hAP ac and hAP ac^2 devices;
*) lte - allow to execute concurrent internal AT commands;
*) lte - improved r11e-LTE and r11e-LTE-US dialling process;
*) lte - improved reading of SMS message after entering running state;
*) ssh - disconnect all active connections when router gets rebooted or turned off;
*) tr069-client: - fixed setting of "DeviceInfo.ProvisioningCode" parameter;
*) wireless - fixed packet processing when "static-algo-0=40bit-wep" is being used (introduced in v6.42);
*) wireless - improved wireless throughput on hAP ac^2 and cAP ac;

deniSun
03-05-18, 12:52
6.43rc6 changelog:

*) bridge - fixed LLDP packet receiving;
*) bridge - fixed processing of fragmented packets when hardware offloading is enabled;
*) dhcpv6-relay - fixed missing configuration after reboot;
*) hotspot - fixed user authentication when queue from old session is not removed yet;
*) quickset - fixed dual radio mode detection process;
*) wireless - fixed usage of allowed signal strength values received from RADIUS;
*) wireless - improved Nv2 PtMP performance;

deniSun
08-05-18, 14:13
6.43rc7 changelog:

*) capsman - allow to change "radio-name" (CLI only);
*) dhcpv4 - prevent sending out ICMP port unreachable packets;
*) dhvpv4-client - fixed DHCP client stuck in renewing state;
*) kidcontrol - allow to edit discovered devices;
*) lte - do not allow to send "at-chat" commands for configless modems;

deniSun
10-05-18, 15:45
6.43rc11 changelog:

*) bridge - do not allow to add same interface list to bridge more than once;
*) console - fixed type "on" and "wireless-status" LED trigger value setting (introduced in v6.43rc1);
*) dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
*) dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
*) dhcpv6-server - added initial dynamic simple queue support;
*) filesystem - fixed situation when filesystem goes into read-only mode on device with NAND type memory;
*) filesystem - improved software crash handling on devices with FLASH type memory;
*) interface - fixed "built-in=no" parameter for manually created interface lists;
*) interface - fixed "dynamic" built-in interface list behavior;
*) interface - fixed interface list which include/exclude another list;
*) interface - fixed interface list which include disabled member;
*) interface - fixed situation when router did reboot due to critical program crash (introduced in v6.42);
*) interface - improved reliability on dynamic interface handling;
*) lte - added extended signal information for Quectel LTE EP06 modem;
*) lte - improved LTE communication process on MMIPS platform devices;
*) routerboard - properly represent board name for hAP ac^2;
*) switch - added support for port isolation by switch chip (CLI only);
*) tile - fixed Ethernet interfaces becoming unresponsive;
*) wireless - do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";

Nikiforos
10-05-18, 19:33
καλησπέρα, το 711 με την RC το εβαλα στην ακρη να μην ειναι μες την μεση, εξαλου δεν χρησιμοποειτε και σε κατι, και δεν υπαρχει και λογος αφου εχω και στο 109 την RC, που φορτωνει και πολυυυυυ ποιο γρηγορα.
Ολα καλα λοιπον με ολες τις εκδοσεις μεχρι και με αυτην και εχω σημειωτεον ολα τα πακετα και τα extras πανω, βεβαια δεν χρησιμοποιω τα παντα.
Οποτε γενικα ειμαι πολυ ευχαριστημενος με την RC 100% και βαλε μεχρι στιγμης. :)

deniSun
15-05-18, 14:50
6.43rc12 changelog:

*) bridge - fixed bridge hw-offloading on MMIPS devices (introduced in v6.43rc10);
*) crs3xx - fixed packet forwarding on SFP+ interfaces (introduced in v6.43rc11);
*) dhcpv4-server - fixed situation when router did reboot due to critical program crash (introduced in v6.43rc);
*) ipsec - improved reliability on IPsec hardware encryption for ARM devices except RB1100Dx4;
*) lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
*) wireless - added option for RADUS "called-station-id" format selection (CLI only);

deniSun
18-05-18, 17:09
6.43rc14 changelog:

*) bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
*) bridge - added ingress filtering options to bridge interface (CLI only);
*) bridge - added initial Q-in-Q support (CLI only);
*) bridge - allow to make changes for bridge port when it is interface list;
*) crs3xx - added initial Q-in-Q hardware offloading support (CLI only);
*) crs3xx - fixed ACL rate rules (introduced in v6.41rc27);
*) defconf - fixed missing bridge ports after configuration reset;
*) ipsec - improved reliability on generated policy addition when IKEv1 or IKEv2 used;
*) led - fixed CCR1016-12S-1S+ LED behaviour after Netinstall (introduced in v6.41rc58);
*) lte - added support for Novatel USB730LN modem with new ID;
*) routerboard - fixed "protected-routerboot" feature (introduced in v6.42);
*) wireless - improved Nv2 stability for 802.11n interfaces on RB953, hAP ac and wAP ac devices;

Nikiforos
23-05-18, 17:44
καλησπέρα, εκανα την τελευταια αναβαθμιση στο 109 (αυτην απο κατω), και τελικα εχει θεμα...
συγκεκριμενα λεει οτι ειναι λαθος username - pass απο παντου ΕΚΤΟΣ απο webfig!!!
δεν εχω δοκιμασει ακομα android apps...
σιγουρα το προβλημα ειναι με αυτο στα bold!
To 711 το εχω βγαλει απο την μεση και δεν ασχολουμε μαζι του δεν υπαρχει λογος αφου δεν μου παρεχει κατι.

- - - Updated - - -

What's new in 6.43rc17 (2018-May-23 11:52):

*) backup - do not encrypt backup file unless password is provided;
*) bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
*) bridge - added initial Q-in-Q support (CLI only);
*) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
*) crs3xx - fixed VLAN filtering when there is no tagged interface specified;
*) lte - added ICCID reading for info command R11e-LTE (CLI only);
*) lte - added roaming status reading for info command (CLI only);
*) lte - improved r11e-LTE configuration exchange process;
*) lte - renamed LTE scan tool field "scan-code" to "mcc-mnc" (CLI only);
*) lte - use alphanumeric operator format in info command;
*) mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
*) radius - use MS-CHAPv2 for "login" service authentication;
*) romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
*) smb - fixed valid request handling when additional options are used;
*) user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
*) w60g - added 4th 802.11ad channel (CLI only);
*) w60g - general stability and performance improvements;
*) w60g - improved maximal achievable distance;
*) w60g - removed distance lock for wAP 60G devices;
*) webfig - improved authentication process;
*) winbox - improved authentication process excluding man-in-the-middle possibility (Winbox v3.14 required);
*) wireless - fixed wireless interface lockup after period of inactivity;
*) wireless - increased stability on hAP ac^2 and cAP ac with legacy data rates;
*) wireless - improved client "channel-width" detection;

deniSun
25-05-18, 15:55
6.43rc19 changelog:

*) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
*) bridge - fixed FastPath for bridge master interfaces (introduce in v6.42);
*) chr - fixed adding MSTI entries;
*) dhcpv6-client - added missing "Server identifier" parameter in release message;
*) kidcontrol - fixed dynamically created firewall rules order;
*) lte - added extended signal information for Quectel LTE EC25 and EP06 modem;
*) lte - added ICCID reading for info command R11e-LTE and R11e-LTE-US (CLI only);
*) user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
*) w60g - added distance measurement (CLI only);

Nikiforos
25-05-18, 19:29
μολις την περασα στο 109 και συνεχιζω να μην μπορω να μπω απο παντου αλλα μονο απο webfig!!!
WTF????? καμια ιδεα? πως στο καλο γινεται αυτο?
πρεπει να εχει να κανει με αυτο που λεει για το user.
Ακομα και απο τα προγραμματα android δεν μπαινει!!!
το θεμα ειναι να βρω τι φταιει γιατι μπορει καποια στιγμη οταν αυτο ερθει στις current να παθω και εκει τα ιδια και οχι μονο εγω φυσικα...

deniSun
25-05-18, 19:54
μολις την περασα στο 109 και συνεχιζω να μην μπορω να μπω απο παντου αλλα μονο απο webfig!!!
WTF????? καμια ιδεα? πως στο καλο γινεται αυτο?
πρεπει να εχει να κανει με αυτο που λεει για το user.
Ακομα και απο τα προγραμματα android δεν μπαινει!!!
το θεμα ειναι να βρω τι φταιει γιατι μπορει καποια στιγμη οταν αυτο ερθει στις current να παθω και εκει τα ιδια και οχι μονο εγω φυσικα...

Με τι προσπαθείς να μπεις; ssh, winbox κλπ;
Οι αντίστοιχες υπηρεσίες είναι ενεργοποιημένες;

Nikiforos
25-05-18, 19:58
Με τι προσπαθείς να μπεις; ssh, winbox κλπ;
Οι αντίστοιχες υπηρεσίες είναι ενεργοποιημένες;

με τα παντα, μπαινει ΜΟΝΟ με webfig τιποτα αλλο!
και δεν ακουμπησα απολυτως τιποτα! ολα ειναι ενεργοποιημενα για τα δικα μου μονο subnets και ειμαι και τοπικα!
εγραψα απο την προηγουμενη εκδοση της RC τι αλλαξε και γιατι δεν μπαινει προφανως και φταιει αυτο!
δες στην προηγουμενη εκδοση τι εχω γραψει.
https://www.adslgr.com/forum/threads/1042376-Mikrotik-ROS-RC-version-%CF%83%CF%85%CE%B6%CE%B7%CF%84%CE%AE%CF%83%CE%B5%CE%B9%CF%82-bugs-%CE%BA%CF%84%CE%BB/page2
ποστ #29

- - - Updated - - -

Η ποιο ευκολη λυση ειναι να γυρισω στην current, το θεμα ειναι οτι οταν αυτο με το user φτασει στις αλλες εκδοσεις θα εχουμε προβληματα, οποτε θα ηθελα να βρω τι φταει.
Σε λιγο να κανω μερικες δοκιμες πχ ενα νεο χρηστη να δω αν μπαινει.

deniSun
25-05-18, 20:02
με τα παντα, μπαινει ΜΟΝΟ με webfig τιποτα αλλο!
και δεν ακουμπησα απολυτως τιποτα! ολα ειναι ενεργοποιημενα για τα δικα μου μονο subnets και ειμαι και τοπικα!
εγραψα απο την προηγουμενη εκδοση της RC τι αλλαξε και γιατι δεν μπαινει προφανως και φταιει αυτο!
δες στην προηγουμενη εκδοση τι εχω γραψει.
https://www.adslgr.com/forum/threads/1042376-Mikrotik-ROS-RC-version-%CF%83%CF%85%CE%B6%CE%B7%CF%84%CE%AE%CF%83%CE%B5%CE%B9%CF%82-bugs-%CE%BA%CF%84%CE%BB/page2
ποστ #29

- - - Updated - - -

Η ποιο ευκολη λυση ειναι να γυρισω στην current, το θεμα ειναι οτι οταν αυτο με το user φτασει στις αλλες εκδοσεις θα εχουμε προβληματα, οποτε θα ηθελα να βρω τι φταει.
Σε λιγο να κανω μερικες δοκιμες πχ ενα νεο χρηστη να δω αν μπαινει.

Δες στα tools τον mac server.

Nikiforos
25-05-18, 20:07
Δες στα tools τον mac server.

τι να κανω απο εκει δεν καταλαβα.

deniSun
25-05-18, 20:10
τι να κανω απο εκει δεν καταλαβα.

Σε τι κατάσταση είναι η υπηρεσία;
Ενεργή; Για ποια;

Nikiforos
25-05-18, 20:18
δεν εχω ακουμπησει ποτε τιποτα εκει μεσα, ουτε καν το εχω κοιταξει ολα allowed τα δειχνει.
οτι εχει απο default προφανως.
Εκανα νεο χρηστη τα ιδια κανει λεει λαθος username ή pass απο οτιδηποτε παιζει ΜΟΝΟ μεσω webfig.
Α! μπαινει και με SSH κονσολα και telnet.
Δεν μπαινω απο προγραμματα android και winbox, μαλλον δεν εχει να κανει με τον user τελικα αλλιως θα το εκανε παντου.

- - - Updated - - -

απο winbox ουτε με mac τα ιδια λεει.

deniSun
25-05-18, 20:30
δεν εχω ακουμπησει ποτε τιποτα εκει μεσα, ουτε καν το εχω κοιταξει ολα allowed τα δειχνει.
οτι εχει απο default προφανως.
Εκανα νεο χρηστη τα ιδια κανει λεει λαθος username ή pass απο οτιδηποτε παιζει ΜΟΝΟ μεσω webfig.
Α! μπαινει και με SSH κονσολα και telnet.
Δεν μπαινω απο προγραμματα android και winbox, μαλλον δεν εχει να κανει με τον user τελικα αλλιως θα το εκανε παντου.

- - - Updated - - -

απο winbox ουτε με mac τα ιδια λεει.

Δες από το εδώ (https://forum.mikrotik.com/viewtopic.php?f=21&t=133420&start=150#p664062) και κάτω για την αναφορά στο API authentication method.

Nikiforos
25-05-18, 20:48
Δες από το εδώ (https://forum.mikrotik.com/viewtopic.php?f=21&t=133420&start=150#p664062) και κάτω για την αναφορά στο API authentication method.

καλα ουτε που το σκεφτηκα οτι θα θελει αλλη εκδοση winbox! thanks! τωρα δουλευει κανονικα!
για τα android apps δεν με πειραζει και τοσο θα δουμε, δεν τα εχω δοκιμασει και ολα.

deniSun
25-05-18, 22:28
καλα ουτε που το σκεφτηκα οτι θα θελει αλλη εκδοση winbox! thanks! τωρα δουλευει κανονικα!
για τα android apps δεν με πειραζει και τοσο θα δουμε, δεν τα εχω δοκιμασει και ολα.

Έχει γίνει και σε παλιότερα upd.
Αναφέρονται πολλές φορές και στα what's new ότι η Χ έκδοση παίζει από μια έκδοση winbox και πάνω μόνο.
βλ. What's new in 6.39 (2017-Apr-27 10:06)

!) winbox - minimal required version is v3.11;
What's new in 6.38 (2016-Dec-30 11:33)

!) winbox - Winbox 3.7 is the minimum version that can connect to RouterOS;
What's new in 6.37.1 (2016-Sep-30 10:28):

!) winbox - now Winbox 3.6 is the minimum version that can connect to RouterOS;

Nikiforos
27-05-18, 15:19
καλησπέρα, ναι εχεις δικιο δεν το προσεξα!
αν δουμε στο ποστ μου #29 εδω https://www.adslgr.com/forum/threads/1042376-Mikrotik-ROS-RC-version-%CF%83%CF%85%CE%B6%CE%B7%CF%84%CE%AE%CF%83%CE%B5%CE%B9%CF%82-bugs-%CE%BA%CF%84%CE%BB/page2

*) winbox - improved authentication process excluding man-in-the-middle possibility (Winbox v3.14 required);

ουτε καν το προσεξα! και παλι μπορει να μην επαιρνα χαμπαρι γιατι δεν εχει 3.14 κανονικα μονο RC υπαρχει.

deniSun
28-05-18, 13:44
Και σε stable η 3.14 από σήμερα.

*) added support for new style authentication and encryption for connections to RouterOS v6.43;

Nikiforos
28-05-18, 16:56
Και σε stable η 3.14 από σήμερα.

καλησπέρα, ωραια το ειδα, thanks! :oneup:

deniSun
30-05-18, 17:05
6.43rc21 changelog:

*) dhcp - added dynamic IPv4/IPv6 "dual-stack" simple queue support, based on client's MAC address;
*) dhcp - fixed DHCP server stuck in invalid state;
*) dhcpv4-server - added "allow-dual-stack-queue" implementation (CLI only);
*) dhcpv6-server - added "allow-dual-stack-queue" implementation (CLI only);
*) kidcontrol - added dynamic accept firewall rules in order to allow limit bandwidth when FastTrack is enabled;
*) lte - do not allow to remove default APN profile;
*) snmp - added "rssi" and "tx-sector-info" value support for w60g type interfaces;
*) vrrp - improved reliability on VRRP interface configured as a bridge port when "use-ip-firewall" is enabled;
*) w60g - added distance measurement (CLI only);
*) winbox - by default specify keepalive timeout value for tunnel type interfaces;
*) winbox - show "System/Health" only on boards that have health monitoring;
*) wireless - added option for RADIUS "called-station-id" format selection;
*) wireless - updated "germany 5.8 ap" and "germany 5.8 fixed p-p" regulatory domain information;

deniSun
05-06-18, 16:41
6.43rc23 changelog:

MAJOR CHANGES IN v6.43:
----------------------
!) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
!) backup - do not encrypt backup file unless password is provided;
!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
!) cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
!) mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
!) radius - use MS-CHAPv2 for "login" service authentication;
!) romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
!) webfig - improved authentication process;
!) winbox - improved authentication process excluding man-in-the-middle possibility (Winbox v3.14 required);
Changes in this release:

*) backup - generate proper file name when router identity is longer than 32 symbols;
*) bridge - added ingress filtering options to bridge interface;
*) bridge - added initial Q-in-Q support;
*) capsman - increase timeout for the CAP to CAPsMAN communication;
*) certificate - added "expires-after" parameter;
*) certificate - fixed "add-scep" template existence check when signing certificate;
*) chr - by default enable link state tracking for virtual drivers with "/interface ethernet disable-running-check=no";
*) chr - fixed boot on hosts older than Windows Server 2012 when running CHR on Hyper-V;
*) chr - fixed interface name assign process when running CHR on Hyper-V;
*) chr - fixed MTU changing process when running CHR on Hyper-V;
*) chr - fixed various network hang scenarios when running CHR on Hyper-V;
*) chr - provide part of network interface GUID at the beginning of "bindstr2" value when running CHR on Hyper-V;
*) console - fixed script permissions if script is executed by other RouterOS service;
*) dhcpv6-server - added initial dynamic simple queue support;
*) ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations;
*) ipsec - separate phase1 proposal configuration from peer menu;
*) lte - improved modem event processing;
*) ppp - fixed "hunged up" grammar to "hung up" within PPP log messages;
*) ppp - show comments from "/ppp secrets" menu within "/ppp active" menu when client is connected;
*) quickset - added missing wireless "channel-width" settings;
*) quickset - added support for "5ghz-a/n" band when CPE mode is used;
*) quickset - recognize 160 MHz channel as HomeAP mode;
*) romon - fixed RoMON services becoming unavailable after disabled once during active scanning process;
*) supout - added "partitions" section to supout file;
*) switch - added support for port isolation by switch chip;
*) webfig - properly display time interval within Kid Control menu;
*) webfig - properly show NTP clients "last-adjustment" value;
*) winbox - added "poe-fault" LED trigger;
*) winbox - added "secondary-channel" setting to wireless interface if 80 MHz mode is selected;
*) winbox - added missing "dscp" and "clamp-tcp-mss" settings to IPv6 tunnels;
*) winbox - allow to specify full URL in SCEP certificate signing process;
*) winbox - fixed arrow key handling within table filter fields;
*) winbox - properly close session when uploading multiple files to the router at the same time;
*) winbox - removed duplicate "20/40/80MHz" value from "channel-width" setting options;
*) winbox - show "scep-url" for certificates;
*) winbox - show "System/Health" only on boards that have health monitoring;
*) winbox - show firmware upgrade message at the bottom of "System/RouterBOARD" menu;
Σημαντικές αλλαγές.

deniSun
12-06-18, 17:10
6.43rc27 changelog:
MAJOR CHANGES IN v6.43:
----------------------

!) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
!) backup - do not encrypt backup file unless password is provided;
!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
!) cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
!) mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
!) radius - use MS-CHAPv2 for "login" service authentication;
!) romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
!) webfig - improved authentication process;
!) winbox - improved authentication process excluding man-in-the-middle possibility (Winbox v3.14 required);
----------------------

Changes in this release:


*) dhcpv4-client - fixed DHCP client that was stuck on invalid state;
*) dhcpv4-server - fixed DHCP server that was stuck on invalid state;
*) health - changed "PSU-Voltage" to "PSU-State" for CRS328-4C-20S-4S+;
*) health - fixed incorrect PSU index for CRS328-4C-20S-4S+;
*) ike1 - purge both SAs when timer expires;
*) ipsec - use monotonic timer for SA lifetime check;
*) led - added "dark-mode" functionality for hEX S devices;
*) lte - added additional ID support for SIM7600 modem;
*) lte - added support for Quanta 1k6e modem;
*) lte - improved r11e-LTE and r11e-LTE-US dialling process;
*) lte - improved readings of info command results for the SXT LTE;
*) lte - improved stability of USB LTE interface detection process;
*) ntp - allow to specify link-local address for NTP server;
*) ppp - added support for additional ID for E3531 modem;
*) snmp - added remote CAP count OID for CAPsMAN;
*) snmp - fixed readings for CAPsMAN slave interfaces;
*) usb - fixed power-reset for hAP ac^2 devices;
*) usb - properly detect USB 3.0 flash on RBM33G when jumper is removed;
*) userman - improved unique username generation process when adding batch of users;
*) w60g - added distance measurement (CLI only);
*) w60g - improved link stability;
*) w60g - improved maximum link distance;
*) wireless - improved Nv2 reliability on ARM devices;

deniSun
15-06-18, 14:58
6.43rc29 changelog:
MAJOR CHANGES IN v6.43:
----------------------

!) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
!) backup - do not encrypt backup file unless password is provided;
!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
!) cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
!) mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
!) radius - use MS-CHAPv2 for "login" service authentication;
!) romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
!) webfig - improved authentication process;
!) winbox - improved authentication process excluding man-in-the-middle possibility (Winbox v3.14 required);
----------------------

Changes in this release:


*) dhcp - reduced resource usage of DHCP services;
*) ipsec - improved reliability on IPsec hardware encryption for RB1100Dx4;
*) led - added "dark-mode" functionality for SXTsq 5 ac devices;
*) led - use routers uptime as a starting point when turning off LEDs if option was not enabled on boot;
*) sfp - fixed DDM data with SFP+ modules on CRS328-4C-20S-4S+ (introduced in v6.43rc10);
*) sms - do not require "port" and "interface" parameters when sending SMS if already present in configuration;
*) swos - implemented "/system swos" menu that allows to upgrade, reset, save or load configuration and change address for dual-boot CRS devices (CLI only);
*) w60g - improved maximum link distance;
*) w60g - improved RAM memoy allocation processes;
*) wireless - improved Nv2 reliability on ARM devices;

deniSun
19-06-18, 13:39
6.43rc32 changelog:
MAJOR CHANGES IN v6.43:
----------------------

!) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
!) backup - do not encrypt backup file unless password is provided;
!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
!) cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
!) mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
!) radius - use MS-CHAPv2 for "login" service authentication;
!) romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
!) webfig - improved authentication process;
!) winbox - improved authentication process excluding man-in-the-middle possibility;
----------------------

Changes in this release


!) winbox - minimal required version is v3.15;
*) api - properly classify API sessions in log;
*) bridge - improved performance when bridge VLAN filtering is used without hardware offloading;
*) chr - enabled promiscious mode (requires to be enabled on host as well) when running CHR on Hyper-V;
*) crs317 - fixed Ethernet inteface stuck on 100 Mbps speed;
*) crs328 - fixed transmit on sfp-sfpplus1 and sfp-sfpplus2 interfaces;
*) crs3xx - do not report SFP interface as running when interface on opposite side is disabled;
*) dude - fixed client auto upgrade (broken since 6.43rc17);
*) export - do not show w60g password on "hide-sensitive" type of export;
*) log - fixed false log warnings about system status after power on for CRS328-4C-20S-4S+;
*) lte - show UICC in correct format for SXT LTE devices;
*) romon - properly classify RoMON sessions in log and active users list;
*) w60g - improved maximal achievable distance;
*) w60g - properly report center status under "tx-sector-info";

deniSun
25-06-18, 13:43
6.43rc34 changelog:
MAJOR CHANGES IN v6.43:
----------------------

!) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
!) backup - do not encrypt backup file unless password is provided;
!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
!) cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
!) mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
!) radius - use MS-CHAPv2 for "login" service authentication;
!) romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
!) webfig - improved authentication process;
!) winbox - improved authentication process excluding man-in-the-middle possibility;
!) winbox - minimal required version is v3.15;
----------------------

Changes in this release


!) cloud - added IPv6 support;
*) console - do not show spare parameters on ping command;
*) crs317 - properly report link state when one link interface is disabled;
*) crs326/crs328 - fixed broken "new-dst-port" ACL rules (introduced in 6.43rc10);
*) crs3xx - fixed flow control;
*) crs3xx - fixed LACP member failover;
*) dhcpv4-client - fixed double ACK packet handling;
*) ethernet - do not show "combo-state" field if interface is not SFP or copper;
*) led - fixed LED default configuration for LtAP mini;
*) lte - added eNB ID to info command;
*) ssh - allow to use "diffie-hellman-group1-sha1" on TILE and x86 devices with "strong-crypto" disabled;
*) supout - added "w60g" section to supout file;
*) watchdog - added "ping-timeout" setting (CLI only);
*) winbox - show "sector-writes" on ARM routers that has such counters;
*) winbox - show "System/Health" only on boards that have health monitoring;

Nikiforos
01-07-18, 15:17
καλησπέρα και καλο μηνα!
την Παρασκευη εβαλα στο 109 την τελευταια εκδοση της RC, ολα καλα.....πηγα εξοχικο το Σαββατο ολα ωραια και καλα.
Την Κυριακη το πρωι σημερα δλδ βλεπω το linksys pap2 να εχει σβησει ενα led, οποτε OFF το VOIP, τελικα βλεπω δεν μπορω να μπω στην καμερα μου στην Αθηνα, δεν μπορω να μπω απο το κινητο με openvpn και δεν συνδεεται και το openvpn client απο το 951 με την κινητη στο εξοχικο.
Τελικα τωρα το κοιταξα και τι να δω....το mikrotik ip cloud να εχει μεινει στην παλια ip! κλεινω ανοιγω το pppoe μπας και, τιποτα εκει στην παλια!
το κλεινω και το ip cloud το ανοιγω τα ιδια!
δοκιμαζω με το noip ονομα μου που τρεχει στο nas server ολα καλα απο το κινητο μπαινω κανονικα.

Καμια ιδεα κανεις? φταιει τωρα η RC αραγες? εχει τυχει σε κανεναν να κολλησει το ip cloud ?
να πω οτι απο το μενου την δειχνει σωστα και οτι εχει κανει update, αλλα αν πας να φτασεις το ονομα δειχνει μια παλια ip που ειχα!!!

- - - Updated - - -

Εκανα reboot πηρε αλλη ip το pppoe client και την δειχνει στο ip cloud κανονικα, αλλα οταν παω να συνδεθω στο ονομα παλι δειχνει την ιδια παλια ip που ειχα χτες!!!!

@ ADSLgr.com All rights reserved.