sakisdsl
01-10-07, 19:54
Νέο firmware Daraytek Vigor 2700 :oneup:
___________________________________________________
[New Functions]
- support T1.413 annex B on modem code "142112"
- support new annex A modem code "1411301"
- support zoneedit to DDNS
- support "port" telnet command
- support telnet commands to set adsl EC/bitswap parameters
(a) adsl bitswap x y
(b) adsl fdmec x
[Improvements & Corrected Problems]
- Improve that show ddns update message on syslog
- Correct wireless region code issue for Taiwan
- Improve that VTA + RVS-Com + ISDN and fax can't work
- Improve that Canon L200 ISDN Fax rate 14400 issue
- Correct that 2nd subnet(routed) cannot trigger ISDN Backup connection
- Correct that windows vista failed to get one IP if it connected with
Vigor router at WAN side
[Notes]
- How to use Telent command to set "User Agent" for VoIP
voip sip misc -t <val> val = 0, hides SIP header User-Agent
val = 1, shows SIP header User-Agent
val = 2, use default User-Agent i.e. DrayTek UA-1.2.3
val = 3, use user-defined User-Agent
voip sip misc -u UAValue sets User-Agent to uaValue
___________________________________________________
Εάν ξέρει καποιος να μας πει τι κάνει αυτη νέα εντολή telnet.
___________________________________________________
[New Functions]
- support T1.413 annex B on modem code "142112"
- support new annex A modem code "1411301"
- support zoneedit to DDNS
- support "port" telnet command
- support telnet commands to set adsl EC/bitswap parameters
(a) adsl bitswap x y
(b) adsl fdmec x
[Improvements & Corrected Problems]
- Improve that show ddns update message on syslog
- Correct wireless region code issue for Taiwan
- Improve that VTA + RVS-Com + ISDN and fax can't work
- Improve that Canon L200 ISDN Fax rate 14400 issue
- Correct that 2nd subnet(routed) cannot trigger ISDN Backup connection
- Correct that windows vista failed to get one IP if it connected with
Vigor router at WAN side
[Notes]
- How to use Telent command to set "User Agent" for VoIP
voip sip misc -t <val> val = 0, hides SIP header User-Agent
val = 1, shows SIP header User-Agent
val = 2, use default User-Agent i.e. DrayTek UA-1.2.3
val = 3, use user-defined User-Agent
voip sip misc -u UAValue sets User-Agent to uaValue
___________________________________________________
Εάν ξέρει καποιος να μας πει τι κάνει αυτη νέα εντολή telnet.