PDA

Επιστροφή στο Forum : Tellas και router Linksys WAG200G



__phil__
19-10-08, 20:15
Καλησπέρα σας,
Συνδέομαι κανονικά σε ADSL Tellas zisto με ADSL modem Siemens.

Είπα να αγοράσω wireless router και πήρα απο Multirama το Linksys WAG200G.

Το ενσωματωμένο CD με οδηγεί να κάνω τις ρυθμίσεις και στην τελική οθόνη εισάγω (όπως μου λέει το τεχνικό τμήμα της Tellas) τα ακόλουθα:

Encapsulation: pppoE
VPI/VCI: 8/35
multiplexing: LLC
DSL username: zisto
password: zisto

Λαμβάνω μήνυμα ΛΑΘΟΥΣ απο το router και μου λένε να επικοινωνήσω με τον ISP!

Δοκιμάζω φυσικά και το δικό μου DSL username και password, πάλι χωρίς επιτυχία.

Θα ήμουν ευγνώμων για οποιαδήποτε βοήθεια,

Ευχαριστώ!:worthy:

Costas_Dav
19-10-08, 20:21
Δοκίμασε να συνδεθεις με Ethernet και δώσε στον browser την διευθυνση http://192.168.1.1/
Κάνε τις ρυθμίσεις από εκεί. Άμα χρειαστείς και άλλη βοήθεια, εδώ είμαστε
Α και κάτι άλλο,το username πρέπει να είναι της μορφής username@tellas.gr or zisto@tellas.gr

Mouse Potato
19-10-08, 21:46
Όπα μισό. Αν έχεις περάσει το στάδιο δημιουργίας username και password (με zisto, zisto), τώρα στα πεδία username και password του Linksys θα βάλεις αυτά που έχεις δημιουργήσει. Όπως σου είπε και ο "αποπάνω" το username πρεπει να 'ναι της μορφής <username>@tellas.gr και το pass αυτό που έχεις...

__phil__
20-10-08, 06:44
Καλημέρα και ευχαριστώ για τη βοήθεια.

Παρακαλώ δείτε τις ρυθμίσεις που έχω κάνει στο attachment.

Αν είμαι ΟΚ πως προχωράω; αλλα sites δεν ανοίγουν..

Αν δεν είμαι ΟΚ, τι να διορθώσω;

Ευχαριστώ!

Costas_Dav
20-10-08, 14:38
Φίλε μου __phil__, οι ρυθμίσεις σου είναι σωστές, αλλά το username και password zisto
είναι μόνο για την πρώτη φορά γιά να μπείς στην αντίστοιχη σελίδα καί να ενεργοποιήσεις τον λογαριασμό σου. Εσύ αφού είσαι ήδη ενεργός μπορείς να χρησιμοποιήσεις το κανονικό σου username και password.
Εάν δεν μπαίνεις και πάλι κάνε μας μιά περιγραφή ποιά led ανάβουν στον router σου (δηλαδή αν το ADSL είναι ανμένο). Επίσης στο τελευταίο μενού δες αν στο ADSL status η γραμμή σου είναι active, τι ταχύτητα έχει και αν πήρες ΙΡ.
Τελευταία έχω να σου πώ να προσέξεις το βύσμα της ADSL γιατί το RJ11 (με τα 4 πινάκια το κλασικό τηλεφωνικό δηλαδή) δεν κάνει πάντα καλή επαφή στο RJ45 που έχει γιά είσοδο ADSL το Linksys WAG200G.

__phil__
21-10-08, 09:23
Σε ευχαριστώ πολύ Costas_Dav! :worthy:

Συνδέθηκα στο web μέσω καλωδίου.

Τι προτείνεις για security για το wireless;

morbius
03-06-09, 23:40
Sorry for using English, I can't write Greek. You can answer in Greek, I read it well.

I live in Vyronas and I've just switched from OTE to Tellas and my Linksys WA300G is not getting the DSL signal. That silly little Siemens router that Tellas gives has the signal, but my router doesn't. I've set it up according to their tech support and I've tried settings from this thread, but it just doesn't work, no DSL signal. I tried with all the phones turned off so to exclude interference as possible cause, but it doesn't help either.

I'm completely clueless, if you could suggest anything it would be great.

Parazaar
04-06-09, 08:41
Τσεκαρε αν το Linksys WA300G που αγορασες ειναι over isdn..πρεπει να ειναι over pstn..αν παρολαυτα ειναι over pstn δοκιμασε να συνδεσεις το dsl καλωδιο απευθειας στην πριζα χωρις splitter και αποσυνδεδεμενες τις υπολοιπες τηλ συσκευες απο τις πριζες..αν και παλι δεν αναβει το dsl led δοκιμασε να το συνδεσεις απευθειας στην κεντρικη πριζα του σπιτιου..αν και παλι τιποτα μας το δηλωνεις για βλαβη..Πρωτα ομως βεβαιωσου οτι ειναι over PSTN!!

morbius
04-06-09, 09:18
Now that I've checked it out, turns out there are Annex A and Annex B versions of WAG200G router, mine must be Annex B since I've had ISDN with OTE, but thechnican from Tellas came and removed the ISDN terminal box, so now I have a plain PSTN. I have downloaded the latest 1.01.09 Annex A firmware from Linksys site, but in the release notes that came with it says that it shouldn't be flashed to Annex B models. Do I dare try it?

I've already tried the other stuff you suggested, it didn't help.

Is there maybe a way to turn this router into access point so I can use it for home wireless together with the router Tellas gave me?

Parazaar
04-06-09, 09:56
Αρα εφταιγε αυτο που σου ειπα ηταν over isdn..με το νεο firmware που κατεβασες αναβει το dsl led? αν αναβει κανονικα εννοειται πως κανει να το δοκιμασεις!!!αν παλι οχι συνεδεσε το siemens με ethernet κανε τις απαραιτητες ρυθμισεις για να μπεις κανονικα στο ιντερνετ ..μετα συνδεσε το linksys με το siemens με ethernet για να μπεις στη σελιδα του linksys και να το ρυθμισεις και μετετρεψε το σε access point..και φυσικα γινεται!!!

morbius
04-06-09, 10:15
I haven't tried flashing the firmware yet, I'm at work and I won't be home until evening.

The problem with that small router Tellas gave me is that I can't login to change it's settings. I can't type in administrator user name, all it offers me is a drop down box with just one option "Admin". When I try to login as Admin with a pasword "admin" (it should be default) it tells me that I must put in user name. I've seen others on the internet had the same problem, but I don't know how they fixed it. I might have to reset the router and set it up manually.

Turning my Linksys router into a AP is actually very difficult, I've asked the manufacturer to send me a guide.

Parazaar
04-06-09, 23:52
password πρεπει να βαλεις admin με μικρους χαρακτηρες διαφορετικα δοκιμασε παλι το ADMIN με κεφαλαια..αν και παλι δεν κανεις login κανε reset στο modem και σεταρε το manually..οσο για το ΑP κανε το εξης: 1) συνδεεις πρωτα το siemens με ethernet το σεταρεις κανονικα με vpi/vci 8/35 με pppoe ή pppoa llc ή vcmax και username/password τα δικα σου και αφου συνδεθεις κανονικα στο ιντερνετ βγαζεις το siemens και συνδεεις με το ιδιο ethernet καλωδιο το linksys.. 2)μπαινεις στη σελιδα του linksys και το μονο που κανεις στο setup menu ειναι να βαλεις σαν encapsulation το bridge mode only - vpi/vci 0/35 και οχι το 8/35 και save..3)Προσοχη!! στην wireless καρτα του linksys βαζεις την ip του siemens και οχι του linksys καθως και τους dns της τελλας..καλη επιτυχια να σαι σιγουρος οτι αμα ακολουθησεις αυτα τα βηματα θα συνδεθει το AP

morbius
04-06-09, 23:57
Ok, turns out that Linksys ISDN router can't be flashed to PSTN.

The only thing I can do is turn it into a access point so I can use the wireless with router Tellas gave me (which works now and gives me solid 9 Mbps speed).

So, I have to put it into bridged mode, but what IP I have to give to Linksys? My Siemens router has IP 192.168.254.254, do I put 192.168.254.1 to Linksys, or does it have to go to a different IP range? My guess is that Siemens needs to do DHCP and NAT, but does it do it through WAG200G without problem?

Parazaar
05-06-09, 00:02
Κανε αυτο που σου ειπα παραπανω και θα συνδεθεις!!!!!Ασε τους αλλους να λενε!!!!!Κανε τα παραπανω και θα με θυμηθεις!!!!!!!!!!!!!!!

Parazaar
05-06-09, 10:31
Ειπαμε συνδεεις το Linksys με ethernet καλωδιο και ανοιγεις τη σελιδα του 192.168.1.1 Μετα πας στο setup και βαζεις encapsulation: bridge mode only / vpi:8 vci:0 και μετα πατας save
Μετα πας στην wireless connection του LINKSYS ομως και βαζεις ip adress 192.168.254.1
subnet mask 255.255.255.0
default gateway 192.168.254.254

preferred dns server 62.169.194.17
alternate dns server 62.169.194.18
αν τα κανεις αυτα το ap θα λειτουργει!!!

OxAp0d0
05-06-09, 14:47
I haven't tried flashing the firmware yet, I'm at work and I won't be home until evening.

The problem with that small router Tellas gave me is that I can't login to change it's settings. I can't type in administrator user name, all it offers me is a drop down box with just one option "Admin". When I try to login as Admin with a pasword "admin" (it should be default) it tells me that I must put in user name. I've seen others on the internet had the same problem, but I don't know how they fixed it. I might have to reset the router and set it up manually.

Turning my Linksys router into a AP is actually very difficult, I've asked the manufacturer to send me a guide.


Είχα ακριβώς το ίδιο πρόβλημα (bold letters) όταν έκανα ενεργοποίηση του U/N και Pass δυο μέρες πριν. Διαπίστωσα τελικά πως... έφταιγε ο firefox. Με τον ΙΕ κατάφερε και έκανε login για να αλλάξω τις ρυθμίσεις. (Ίσως κάτι να έχει να κάνει με τον FF που κρατάει ενεργό το session)

morbius
05-06-09, 15:01
Είχα ακριβώς το ίδιο πρόβλημα (bold letters) όταν έκανα ενεργοποίηση του U/N και Pass δυο μέρες πριν. Διαπίστωσα τελικά πως... έφταιγε ο firefox. Με τον ΙΕ κατάφερε και έκανε login για να αλλάξω τις ρυθμίσεις. (Ίσως κάτι να έχει να κάνει με τον FF που κρατάει ενεργό το session)

Yeah, the problem for me was Opera and I also heard that it doesn't work with Safari either. It has to be set up using IE. :( Fortunately, not all the computers at my place run Linux.

I'll try to set the Linksys when I get home, it's the last peace of work still left to be done.

morbius
05-06-09, 21:59
Ok, it works. In the begining the router was turning off on its own, it drove me crazy. I called Tellas tech support and for once they actually gave me good advice, the problem was caused by Skype, it has to be switched to another port.

Ping in the online games I play went up by 20 - 30 ms from the time I used OTE, nothing critical, but still disapointing. We'll see in the next days if the connection is stable.

Thank you for your help.

@ ADSLgr.com All rights reserved.