Debian testing κλείνει ξαφνικά

[giannis12a]

Έχω περάσει εδώ και κανά μήνα περίπου την testing και το πρόβλημα που έχω είναι πως εκεί που δουλεύω κανονικά στον υπολογιστή, μαυρίζει η οθόνη και προσπαθεί να κάνει επανεκίνηση μόνο του χωρίς όμως αποτέλεσμα. Πατάω το power να κλείσει και το ξεκινάω πάλι από την αρχή κανονικά. Το περίεργο είναι πως μπορεί να περάσουν και 3 ημέρες χωρίς να το κάνει και καμιά φορά μέσα σε 20 λεπτά να το κάνει 2 φορές.
Εν τω μεταξύ βγάζει ένα μήνυμα να τσεκάρω τον x.org και αν είναι η τελευταία έκδοση.

Ποστάρω το μήνυμα που παίρνω στο /var/log/Xorg.0.log
δεν το περνάω όλο γιατί είναι κατεβατό.



X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-9)
Current Operating System: Linux giannis-laptop 2.6.26-1-686 #1 SMP Mon Dec 15 1$
Build Date: 15 November 2008 05:39:59PM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.

[trd64]

Κάνε re-install τον Χ και κάνε σωστές ρυθμίσεις.

[flamelab]

Ανεβασε το Xorg.0.log ολόκληρο ή το αποτέλεσμα από την εντολή:


cat /var/log/Xorg.0.log | grep EE

[giannis12a]

(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 915GM found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xb0106400 - 0xb01064ff (0x100) MX[B]
[5] -1 0 0xb0107000 - 0xb01070ff (0x100) MX[B]
[6] -1 0 0xb0107400 - 0xb01074ff (0x100) MX[B]
[7] -1 0 0xb0104000 - 0xb0105fff (0x2000) MX[B]
[8] -1 0 0xb0100000 - 0xb0103fff (0x4000) MX[B]
[9] -1 0 0xb0106800 - 0xb0106fff (0x800) MX[B]
[10] -1 0 0xb0106000 - 0xb01060ff (0x100) MX[B]
[11] -1 0 0xb0040400 - 0xb00404ff (0x100) MX[B]
[12] -1 0 0xb0040800 - 0xb00409ff (0x200) MX[B]
[13] -1 0 0xb0040000 - 0xb00403ff (0x400) MX[B]
[14] -1 0 0xb0000000 - 0xb003ffff (0x40000) MX[B](B)
[15] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[16] -1 0 0xb0080000 - 0xb00fffff (0x80000) MX[B](B)
[17] -1 0 0x30000000 - 0x3007ffff (0x80000) MX[B](B)
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[21] -1 0 0x000020a0 - 0x000020bf (0x20) IX[B]
[22] -1 0 0x00001810 - 0x0000181f (0x10) IX[B]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[27] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[28] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[29] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[30] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[31] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[32] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[33] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[34] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[35] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xb0106400 - 0xb01064ff (0x100) MX[B]
[5] -1 0 0xb0107000 - 0xb01070ff (0x100) MX[B]
[6] -1 0 0xb0107400 - 0xb01074ff (0x100) MX[B]
[7] -1 0 0xb0104000 - 0xb0105fff (0x2000) MX[B]
[8] -1 0 0xb0100000 - 0xb0103fff (0x4000) MX[B]
[9] -1 0 0xb0106800 - 0xb0106fff (0x800) MX[B]
[10] -1 0 0xb0106000 - 0xb01060ff (0x100) MX[B]
[11] -1 0 0xb0040400 - 0xb00404ff (0x100) MX[B]
[12] -1 0 0xb0040800 - 0xb00409ff (0x200) MX[B]
[13] -1 0 0xb0040000 - 0xb00403ff (0x400) MX[B]
[14] -1 0 0xb0000000 - 0xb003ffff (0x40000) MX[B](B)
[15] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[16] -1 0 0xb0080000 - 0xb00fffff (0x80000) MX[B](B)
[17] -1 0 0x30000000 - 0x3007ffff (0x80000) MX[B](B)
[18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[23] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[24] -1 0 0x000020a0 - 0x000020bf (0x20) IX[B]
[25] -1 0 0x00001810 - 0x0000181f (0x10) IX[B]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[28] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[30] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[31] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[32] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[33] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[34] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[35] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[36] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[37] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[38] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(0): Chipset: "915GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xB0080000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(==) intel(0): Enabling EXA render acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "SEC", prod id 12866
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "SEC", prod id 12866
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Output LVDS using initial mode 1280x768
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 2.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000202 to 0x80000202
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x30000000 to 0x000c0c00
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xb0000000 - 0xb003ffff (0x40000) MS[B]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MS[B]
[2] 0 0 0xb0080000 - 0xb00fffff (0x80000) MS[B]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xb0106400 - 0xb01064ff (0x100) MX[B]
[8] -1 0 0xb0107000 - 0xb01070ff (0x100) MX[B]
[9] -1 0 0xb0107400 - 0xb01074ff (0x100) MX[B]
[10] -1 0 0xb0104000 - 0xb0105fff (0x2000) MX[B]
[11] -1 0 0xb0100000 - 0xb0103fff (0x4000) MX[B]
[12] -1 0 0xb0106800 - 0xb0106fff (0x800) MX[B]
[13] -1 0 0xb0106000 - 0xb01060ff (0x100) MX[B]
[14] -1 0 0xb0040400 - 0xb00404ff (0x100) MX[B]
[15] -1 0 0xb0040800 - 0xb00409ff (0x200) MX[B]
[16] -1 0 0xb0040000 - 0xb00403ff (0x400) MX[B]
[17] -1 0 0xb0000000 - 0xb003ffff (0x40000) MX[B](B)
[18] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[19] -1 0 0xb0080000 - 0xb00fffff (0x80000) MX[B](B)
[20] -1 0 0x30000000 - 0x3007ffff (0x80000) MX[B](B)
[21] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[22] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[23] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[24] 0 0 0x00001800 - 0x00001807 (0x8) IS[B]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[26] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[27] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[28] -1 0 0x000020a0 - 0x000020bf (0x20) IX[B]
[29] -1 0 0x00001810 - 0x0000181f (0x10) IX[B]
[30] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[31] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[32] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[33] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[34] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[35] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[36] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[37] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[38] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[39] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[40] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[41] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[42] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
[43] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[44] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 110080 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 440316 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xb0080000
(II) intel(0): [drm] ring buffer = 0xc0000000
(II) intel(0): [drm] mapped front buffer at 0xc1000000, handle = 0xc1000000
(II) intel(0): [drm] mapped back buffer at 0xc4000000, handle = 0xc4000000
(II) intel(0): [drm] mapped depth buffer at 0xc5000000, handle = 0xc5000000
(II) intel(0): [drm] mapped classic textures at 0xc6000000, handle = 0xc6000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xc0000000,0x10000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 31457280 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01000000 (pgoffset 4096)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x06000000 (pgoffset 24576)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000001f820000 physical
)
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000001fe20000 physical
)
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000001fe21000 physical
)
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000001fe33000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x01000000-0x01ffffff: front buffer (10240 kB) X tiled
(II) intel(0): 0x02000000-0x03dfffff: exa offscreen (30720 kB)
(II) intel(0): 0x04000000-0x04ffffff: back buffer (10240 kB) X tiled
(II) intel(0): 0x05000000-0x05ffffff: depth buffer (10240 kB) X tiled
(II) intel(0): 0x06000000-0x07ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 305 x 183
(WW) Configured Mouse: No Device specified, looking for one...
(II) Configured Mouse: Setting Device option to "/dev/input/mice"
(--) Configured Mouse: Device: "/dev/input/mice"
(==) Configured Mouse: Protocol: "Auto"
(**) Option "CorePointer"
(**) Configured Mouse: always reports core events
(==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Configured Mouse: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Generic Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "us,gr"
(**) Generic Keyboard: XkbLayout: "us,gr"
(**) Option "XkbOptions" "grp:alt_shift_toggle"
(**) Generic Keyboard: XkbOptions: "grp:alt_shift_toggle"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(II) evaluating device (Configured Mouse)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) evaluating device (Generic Keyboard)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(--) Configured Mouse: PnP-detected protocol: "ExplorerPS/2"
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) SynPS/2 Synaptics TouchPad auto-dev sets device to /dev/input/event9
(**) Option "Device" "/dev/input/event9"
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: MOUSE)
(--) SynPS/2 Synaptics TouchPad auto-dev sets device to /dev/input/event9
(**) Option "Device" "/dev/input/event9"
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) intel(0): EDID vendor "SEC", prod id 12866
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x768"x0.0 68.93 1280 1296 1344 1408 768 771 777 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 12866


αυτά μου έβγαλε με cat /var/log/Xorg.0.log

[flamelab]

Δεν φαίνεται κανενα σφάλμα :hmm:

[giannis12a]

σημειωτέον πως πρόκειται για έναν φορητό ΗΡ 512ram.

Βέβαια με καμία άλλη διανομή δεν το έχει ξανακάνει, έχουν περάσει από εδώ αρκετές. Εϊχα βάλει παλαιότερα stable και δεν είχα πρόβλημα, αλλά ηταν αρχαία τα πακέτα και το γύρισα σε testing.

Επίσης δεν ξέρω πως να κάνω επανεγκατάσταση τον Χ

[trd64]

Κάνε πρώτα εγκατάσταση το consolekit, κάνε restart και βλέπουμε.

Πως πέρασες στην testing?

[giannis12a]

netinstall

εγακτέστησα το conlolekit κι έκανα επανεκίνηση

[trd64]

Τώρα περιμένουμε... :)

[giannis12a]

Άρα μπορεί να μας πάρει και 2 ημέρες για να μάθουμε να θα ξανακλείσει.

Δηλαδή το consolekit είναι κάτι σαν repairkit ας πούμε?

[trd64]

Ας ελπίσουμε να μην κλείσει πάλι (τουλάχιστον μόνο του :) )

ConsoleKit is a framework for defining and tracking users, login sessions, and seats (http://www.freedesktop.org/wiki/Software/ConsoleKit)

Περισσότερα (http://people.freedesktop.org/~mccann/doc/ConsoleKit/ConsoleKit.html)

[giannis12a]

Ίδωμεν, ευχαριστώ.

[giannis12a]

Να ευχαριστήσω τον φίλο trd64, μιας και το πρόβλημα λύθυκε, δεν το ξανάκανε.:oneup:

[Simpleton]

Είχα κι εγώ αυτό το πρόβλημα χρησιμοποιώντας τον GDM (με τον KDM κανένα πρόβλημα). Λύθηκε αφού πρόσθεσα στο xorg.conf μου την επιλογή
Option "AccelMethod" "XAA"


Section "Device"
Identifier "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
Driver "intel"
BusID "PCI:0:2:0"
Option "AccelMethod" "XAA"
EndSection

[giannis12a]

Για κάνε μια επεξήγηση πως ανοίγει το xorg.conf γιατί δεν το βρίσκω , μιας και που σήμερα το ξανάκανε.:down:

[Simpleton]

Από κονσόλα:

sudo gedit /etc/X11/xorg.conf (αν έχεις KDE, αντί για gedit βάζεις kedit ή kwrite).

[giannis12a]

ευχαριστώ. Κάτσε να περιμένω τώρα γιατί έτσι νόμισα και πριν πως διορθώθηκε

[Simpleton]

Μην ξεχάσεις να επανεκκινήσεις τον Xorg αφού αλλάξεις το αρχείο, π.χ. με επανεκκίνηση του υπολογιστή ή κάνωντας log out και πατώντας μετά Ctrl-Alt-Backspace.

[antonis_wrx]

# vi /etc/X11/xorg.conf

[myle]

Από κονσόλα:

sudo gedit /etc/X11/xorg.conf (αν έχεις KDE, αντί για gedit βάζεις kedit ή kwrite).

Αν δεν κάνω λάθος σε εφαρμογές που χρησιμοποιούν τον xserver αντί για sudo πιο σωστό είναι:


Για Gnome: gksudo
Για KDE: kdesu

[giannis12a]

Με sudo δεν ανοίγει, έδωσα su , μετά κωδικό και ύστερα έδωσα την εντολή.

[myle]

Είτε δεν έχεις εγκατεστημένο το sudo, είτε δεν είσαι στην λίστα των sudoers.

[boeotian]

Είτε δεν έχεις εγκατεστημένο το sudo, είτε δεν είσαι στην λίστα των sudoers.

+ είτε δεν το βρίσκει στο path σου :)

[giannis12a]

Να τολμήσω να πω, πως περάσανε 3 ημέρες και δεν το έχει ξανακάνει?:-k:-k

[Simpleton]

2 εβδομάδες εδώ. Υποθέτω ότι είναι ελαττωματικό το συγκεκριμένο chipset, ο GDM ή και τα δύο :hmm:

[giannis12a]

Λογικά , όταν το lenny γίνει stable δεν θα πρέπει να έχει λυθεί το πρόβλημα?

Εν τω μεταξύ, αυτή η παράμετρος που δώσαμε τι ακριβώς κάνει, γνωρίζεις?

[Simpleton]

Τόσο καιρό που είναι frozen το testing, θα έπρεπε να το είχαν διορθώσει. Τώρα βέβαια το Lenny πρόκειται να βγει καθυστερημένα, οπότε βλέπουμε...

Όσο για τη ρύθμιση, μακάρι να ήξερα. Αν κρίνω από το όνομα, επηρεάζει το acceleration method, τη μέθοδο επιτάχυνσης γραφικών. Στο διαδίκτυο βρήκα να την προτείνουν για προβλήματα σχετικά με chipset της Intel, ενώ δημιουργεί προβλήματα σε χρήστες με άλλα chipset.

[giannis12a]

Το θέμα είναι πως για την ώρα δουλεύει , οπότε βολευόμαστε.:whistle:

[European]

Για κάνε μια επεξήγηση πως ανοίγει το xorg.conf γιατί δεν το βρίσκω , μιας και που σήμερα το ξανάκανε.:down:


sudo gedit /etc/X11/xorg.conf

(αν τρέχεις kde αντί για gedit βάζεις kwrite)

Διορθώνεις ότι θέλεις και κάνεις save το αρχείο
Mετά logout > login και βλέπεις ... τι έκανες! :lol:

[megahead13]

sudo gedit /etc/X11/xorg.conf

(αν τρέχεις kde αντί για gedit βάζεις kwrite)

Διορθώνεις ότι θέλεις και κάνεις save το αρχείο
Mετά logout > login και βλέπεις ... τι έκανες! :lol:
Και alt+control+backspace για restart του xorg. ;)

[Xouzouris]

Edit: ακυρο.