SiS ac97 modem ubuntu δεν δουλευει

[siakattack]

καλημερα σε ολους.εχω το εξης προβλημα:

εχω ενα acer λαπτοπ το οποιο θελω να συνδεθω με μοντεμ.Αλλα

ενω βλεπει την συσκευη στο device manager και με lspci,οταν κανω κληση με το gnomeppp λεει couldn't detect modem.καμια ιδεα για το πως να το κανω να δουλεψει?

ευχαριστω

ΒΤW η διανομη ειναι ubuntu 9.10

[jim_p]

Για δες μηπως ο network manager αναλαμβανει ΚΑΙ τις dial up...

[siakattack]

το δοκιμασα...το θεμα ειναι οτι δεν ειναι σεταρισμενο το μοντεμ

[Simpleton]

Δώσε την εντολή lspci -nn, ώστε να σου εμφανιστούν και τα VID/PID, που είναι σε μορφή [xxxx: xxxx].

Το πιο πιθανό είναι το laptop σου να έχει softmodem (http://en.wikipedia.org/wiki/Softmodem), που απαιτεί driver για να δουλέψει.

[siakattack]

το μοντεμ ειναι 00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)

το εψαξα λιγο με το scanmodem και αν δεν κανω λαθος ειναι hsfmodem.εβαλα οδηγους οπως λεει αλλα παλι τζιφος :(

[gorillaki]

To modem είναι 100% softmodem.
Σε παρακαλώ, κατέβασε το διαγνωστικό scanmodem από ΕΔΩ (http://132.68.73.235/linmodems/index.html#scanmodem) τρέξε το σαν root/σουντάς και δώσε μας το ΠΛΗΡΕΣ αποτέλεσμα.
Από τα hsfmodems άλλα δουλεύουν, και άλλα όχι- καλό είναι να ξέρουμε τα πλήρη του χαρακτηριστικά.

[siakattack]

Only plain text email is forwarded by the Discuss@Linmodems.org List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.31-14-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009
scanModem update of: 2009_09_15


Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms

There are no blacklisted modem drivers in /etc/modprobe* files

Potentially useful modem drivers now loaded are:


If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@linmodems.org

For candidate card in slot 00:02.6, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:02.6 1039:7013 1025:0082 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller

Modem interrupt assignment and sharing:
18: 698 IO-APIC-fasteoi SiS SI7012
--- Bootup diagnostics for card in PCI slot 00:02.6 ----
[ 0.120193] pci 0000:00:02.6: reg 10 io port: [0x1400-0x14ff]
[ 0.120201] pci 0000:00:02.6: reg 14 io port: [0x1080-0x10ff]
[ 0.120249] pci 0000:00:02.6: supports D1 D2
[ 0.120252] pci 0000:00:02.6: PME# supported from D3hot D3cold
[ 0.120258] pci 0000:00:02.6: PME# disabled
[ 1.299880] serial 0000:00:02.6: enabling device (0000 -> 0001)
[ 1.299906] serial 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.299913] serial 0000:00:02.6: PCI INT C disabled

The PCI slot 00:02.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
if help is needed.



===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.20
The modem cards detected by "aplay -l" are: None


The /proc/asound/pcm file reports:
-----------------------
00-00: Intel ICH : SiS SI7012 : playback 1 : capture 1
00-01: Intel ICH - MIC ADC : SiS SI7012 - MIC ADC : capture 1

about /proc/asound/cards:
------------------------
0 [SI7012 ]: ICH - SiS SI7012
SiS SI7012 with ALC203 at irq 18
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive diagnostics for card in bus 00:02.6:
Modem chipset detected on
NAME="Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller "
CLASS=0703
PCIDEV=1039:7013
SUBSYS=1025:0082
IRQ=18
SOFT=1039:7013.MC97
CodecArchived=CXT
CodecClass=CXT
IDENT=hsfmodem
Driver=hsfmodem-drivers

For candidate modem in: 00:02.6
0703 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller
Primary device ID: 1039:7013
Subsystem PCI_id 1025:0082
Softmodem codec or chipset from diagnostics:
from Archives: CXT, a Conexant type using hsfmodem software.
CXTnn is a generic for all CXTnumbers, with Linuxant hsfmodem software support.


Support type needed or chipset: hsfmodem


For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt

From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.02full_k2.6.31_14_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.

The directions following below need only be pursued, if the above procedures are not adequate.

Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.31_14_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt


Completed candidate modem analyses.

The base of the UDEV device file system is: /dev/.udev

Versions adequately match for the compiler installed: 4.4.1
and the compiler used in kernel assembly: 4.4.1

The patch utility is needed and is needed for compiling ALSA drivers, and possibly others.


Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.4
linuc_headers base folder /lib/modules/2.6.31-14-generic/build

However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
-rwsr-xr-- 1 root dip 277352 2009-02-20 19:25 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd

Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:

Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:

Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


........Auto merged post: siakattack πρόσθεσε 2 λεπτά και 59 δευτερόλεπτα αργότερα ........

καλυτερα εδω
http://www.pastebin.ca/1676206

[gorillaki]

Στο σάϊτ της Linuxant αναφέρει σαφώς ότι το μόντεμ υποστηρίζεται.
http://www.linuxant.com/drivers/hsf/
SIS AC-Link Controller, τελευταίο στη λίστα.
Ωστόσο, φαντάζομαι γνωρίζεις ότι ο δωρεάν driver είναι capped στα 14.400, έτσι; Η κοινώς, μόνο για faxing είναι κατάλληλος.

[Simpleton]

Η δωρεάν έκδοση είναι μόνο για data, πρέπει να πληρώσεις για να έχεις φαξ. Εκτός αν υπάρχει τρόπος να το παρακάμψεις αυτό.


the HCF and HSF drivers are now available in two editions:
# a free version (limited to 14.4Kbps data), available at no cost. Please use it to test if your hardware is compatible.
# a full version (with 56K and FAX), available for a modest price.

[gorillaki]

O free driver, μου έχει δουλέψει και σαν fax (χωρίς voice capabilities- πιθανόν αυτό εννοούν).
Προσωπικά χρησιμοποιώ ένα παλιό PCI winmodem, με τσιπάκι από την Smartlink, που δουλεύει άψογα σαν fullefeatured φαξιέρα. H Smartlink βέβαια σταμάτησε να παίζει εδώ και τριάμισι χρόνια (εξαγοράστηκε από την Connexant), αλλά τα μοντεμάκια της δουλεύουν μια χαρά, μέσω opensource driver, ακόμη και με τους πολύ πρόσφατους kernels (slmodem).