PDA

Επιστροφή στο Forum : ΒΟΗΘΕΙΑ ΔΕΝ ΠΑΕΙ ΑΛΛΟ!!



poussou
31-01-04, 00:15
Δεν αντέχω άλλο, δυστυχώς έφτασα στα όρια μου...Είπα και γώ να βάλω DSL και εχω βρεί τον μπελά μου.Σας θερμοπαρακαλώ όποιος μπορει ας βοηθήσει γιατί δεν βρίσκω άκρη.Πήρα όπως και πολλοί άλλοι στο φόρουμ το 650H και είπα να κάνω μόνος μου την εγκατάσταση.Χθές αγόρασα το modem και με μεγάλη μου χαρά σήμερα είδα το πράσινο φωτάκι του DSL αναμένο.Πήρα λοιπόν μια netcarta και είπα να ρυθμήσω τα settings.Έχω μια ethernet card της realtek και win xp.Αρχικά ακολουθόντας τις οδηγίες κατάφερα να μπώ στο web menu όπου μετά απο αρκετές δοκιμές ΔΕΝ κατάφερα να συνδεθώ καθώς ενώ η γραμμή λειτουργούσε μου έδινε το μύνημα που είδα και σε κάποιο άλλο post:

Test ADSL synchronization PASS
Test ADSL(ATM OAM) loopback test PASS
Test PPP/PPPoE server connection FAIL
Ping default gateway FAIL

Ότι και να έκανα΄ήταν αδύνατο να συνδεθώ .
Το ποιό τραγικό όμως και ο λόγος του post είναι ότι σε κάποια φάση και εντελώς ξαφνικά, έπαψα να μπορώ να μπώ στο web config!!!Κοιτόντας το ipconfig είδα ότι το 650H ΕΠΑΨΕ να δίνει automatic ip το default 192.168.1.1 αλλά
Autoconfiguration ip 169.254.134.119 και subnet mask 255.255.0.0 !!!!!

ΑΠΟ ΤΟΤΕ ΔΕΝ ΜΠΟΡΩ ΠΛΕΟΝ ΝΑ ΣΥΝΔΕΘΩ ΜΕ ΤΟ ΜΟΝΤΕΜ!!!ΒΟΗΘΕΙΑ ΘΑ ΤΑ ΠΑΙΞΩ.Τι στο π@@τσο έγινε;Γιατί άλλαξε ξαφνικά το default ip;
Δέν έκανα ούτε upgrade ούτε τίποτα.Στο άλλο ποστ κάποιος λέει για serial connection αλλά ούτε αυτό ξέρω πώς να το κάνω....Τί να κάνω ρε παιδιά;;;;ΒΟΗΘΕΙΑ!!

P.S.Ειμαι σε DSLAM Siemens και δοκίμασα επεισης αλλαγή μέσω τον properties του Ethernet adapter se fixed 192.168.1.1 αλλά πάλι τίποτα....

kostthem
31-01-04, 00:43
poussou,

Ψυχραιμία. Το πιθανότερο είναι να ανήκουμε στην ίδια κατηγορία. "Κουμπώσαμε" δηλαδή στο DSLAM αλλά δεν παραμετροποιήθηκε ακόμα η γραμμή μας. Θεωρητικά θα πάρει 24-36 ώρες. Είμαστε και λίγο άτυχοι που πέφτει Σαββατοκύριακο και δεν μπορούμε π.χ. να πάρουμε τηλ να ρωτήσουμε αν ενεργοποιήθηκε η γραμμή μας.

Υπομονή φίλε μου, το πιο δύσκολο σημείο πέρασε, το ξέρω πως ανυπομονείς.


Εύχομαι αύριο το μεσημέρι να ξαναδοκιμάσεις και να σου δουλεύει :mrgreen: .


Edit: για το modem δεν έχω ιδέα για να σε βοηθήσω, αν ξαναβρεις τις προηγούμενες ρυθμίσεις άστες εκεί και δοκίμαζε ανα δίωρο.

poussou
31-01-04, 01:07
Δέν νομίζω ότι έχει να κάνει με την γραμμή.Απο ότι ρώτησα στον ΟΤΕ η έχεισ γραμμή ή δεν έχεις....Άλλωστε απο το LINE TEST (πρίν παρει τον π...λο το modem) μου έλεγε ότι είναι όλα ΟΚ.Anyway, τώρα έχω μεγαλύτερο πρόβλημα που έχει να κάνει με το ότι ΟΥΤΕ ΣΤΟ SETUP ΤΟΥ MODEM δεν μπορώ να μπώ...Τι να λέμε για την γραμμή....Thanks πάντως....Κανένας άλλος μήπως ξέρει;;;

Kerl
31-01-04, 01:17
Η γραμμή σου λειτουργεί . Το πρόβλημα είναι τα LAN settings .

Δώσε στην realtek ip 192.168.1.2 . Mask 255.255.255.0 . Gateway 192.168.1.1 . dns τα αντίστοιχα του provider σου ( δεν παίζουν ρόλο ακόμα)

Λογικά έτσι 8α μπορέσεις να μπεις πάλι στο zyxel .

euri
31-01-04, 01:19
poussou, έχω την αίσθηση ότι κάτι χάνεις. Ο 650Η έχει από το εργοστάσιο ως δική του ΙΡ την 192.168.1.1 Δεν μπορείς εσύ να την δώσεις ΚΑΙ στην κάρτα δικτύου στο PC σου. Η 169.254.134.119 που εμφανίζεται είναι - αν δεν κάνω λάθος - η default αντρέσσα που δίνουν τα ΧΡ όταν δεν μπορούν από κάπου να πάρουν αυτόματα ΙΡ.

Βάλε πρώτα το PC σου να παίρνει αυτόματα την ΙΡ και δοκίμασε να "δεις" το 650Η από το web config. Αν για οποιοδήποτε λόγο δεν πιάσει, δώσε "καρφωτή" μια ΙΡ στην κάρτα δικτύου σου που να είναι στο ίδιο subnet με το 650Η (πχ 192.168.1.5) και default gateway το 192.168.1.1

Αν μπορείς να δουλέψεις το web config και παρόλα αυτά δεν έχεις σύνδεση, τότε μάλλον ο ΟΤΕ ακόμα δε σε έχει "ανοίξει"

Axilleass
31-01-04, 01:19
Κανε ενα ωραιοτατο reset στο modem και ελπιζω να συνελθει.. Εχεις απο πισω ενα πολυ μικρο ασπρο κουμπακι.. Το πατας με κατι αιχμιρο (νομιζω) για μερικα δευτερολεπτα.. Μετα θα δουλεψει στις defauld ρυθμισεις..
Οσο για τα fail.. Εχεις βαλει τις DNS για νετκαρτα ?? το U.N. και το password ειναι σωστα ?? Ξαναπερασε τα κι ας φαινονται σωστα.. το U.N. να ειναι με @acn στο τελος..

poussou
31-01-04, 01:29
Παιδιά τα έκανα ΟΛΑ τα παραπάνω.Το reset δεν έκανε τίποτα...Τα settings τα έβαλα όπως τα λές με τις IP kerl, ΠΑΛΙ ΤΙΠΟΤΑ...Βρήκα όμως κάτι άλλο που ίσως βοηθήσει και άλλου.Ειναι βέβαια μετάφραση απο ΣΥΣΤΡΑΝ αλλά μάλλον λέει ότι ενεργοποίησα το router function και τώρα μου δίνει ip σε μορφή 169.254......
Δείτε εδώ...


When the apparatus stands as a router adjusted, the computer on automatic Ip-adres obtains state and Dhcp-server in the router to state, then can expect you (standard) on the computer connected Ip-adres such as 192.168.1.33, 192.168.1.34, etc..

If the apparatus stands as a modem adjusted then can you public Ip-adres expect. You nevertheless get at the modem institution Ip-adres that start with 192.168.1. then must you the DHCP server of the router turn off.)

If none Ip-adres give get the computer and themselves (by means of APIPA or car configuration) Ip-adres, then Ip-adres start with 169,254. < br>If Ip-adres are 0.0.0.0, then themselves none Ip-adres have also distributed the computer.
, Found oneself or by means of car configuration Ip-adres get none of the router can indicate on the following problems:

It can be that you have chosen rather to establish fixed Ip-adres on the computer. Pay attention or that you thus the standard (or default) must fill in gateway and DNS data on that computer. The procedure differs for Windows and for Mac DC.
The apparatus has been established as a router and Dhcp-server of the router stand. Couple fixed Ip-adres in the computer and look or it or succeeds.
There is a wiring problem. Replace the network cable by other (preferably the short supplied cable).
There is a physical problem with the network card. Use another network card or computer with another network card.
The found oneself network card has been connected. Possible other in the computer geinstalleerde try network cards.
Another network card in the computer appears established in the same range and the computer tries the found oneself use network card. Deactiveer the remaining network cards and try possible other in the computer geinstalleerde network cards.
A firewall programme (area alarm, Blackice etc) on the computer is too strictly adjusted. Deactiveer possible firewall applications
Mac-adres of the router (stands at the bottom and is the same for LAN and WAN) must become to the ISP to pass on, because still none or another one Mac-adres on this line have been established. (Unfortunately these routers support no Mac-adres spoofing.) Get in touch with the ISP to check this.
Sometimes your account have not been activated at the internet provider, use you the found oneself inlognaam, guard word. Get in touch with your ISP to check this.
Do not use the router the correct institutions for these ISP make connection with the router and check by means of snel-start the institutions.
At the older firmwares (for 31 March 2003 on Ftp-site) of prestige 650H-11/H-13/R-11/R-13/HW-11/HW-13 and 652R-11/R-13 it can occur that with the PPPoA or PPPoE institution with Nailed-Up forget connection to, the router the Internet set up connection. In the factory situation, checkthe institutions put the router back (as a router if as a modem)en do not beginning thereby Nailed-up the connection . Possibly try a newer firmware.
(Only at prestige 652 routers) WAN-LAN the firewall rules block also answers of DHCP servers, unless BOOTP (UDP poort 68) are let through. Joint this rule this way necessary in the router, or tries it whereas the firewall built in in the router are gedeactiveerd.
There is a route ring problem at the Telco or ISP. Get in touch with the ISP to determine. Answer do Dhcp-server the your DHCP request?
Have you already put the router back in the factory situation?
The router puts back in the factory situation and configures and checks the institutions (as a router) or (as a modem).
As all this not the desired impact has. Try a another apparatus and/or make Wan-log and a e-mail the result.


Οπότε μάλλον έκανα βλακεία στo web config...Το πρόβλημα είναι ΠΩΣ ΜΠΑΙΝΩ ΠΑΛΙ;;;Ισως με το serial αλλά ούτε και με telnet βλέπω το modem στο COM PORT....HEEEELPPPPPP... :cry: :cry: :cry:

Kerl
31-01-04, 01:34
Συνδεσε το σειριακό καλώδιο σε κάποια com. Στη συνέχεια ξεκίνα το hyperterminal ( είναι μέσα στο accesories) και δοκίμασε με αυτό να συνδεθείς στην com που έβαλες το modem.

Καλή τύχη :)

Axilleass
31-01-04, 11:17
:shock: :(

@ ADSLgr.com All rights reserved.