durutti
01-05-13, 16:46
Το αγορασα για να το δουλευω απο το ταμπλετ με android και μονο εκει δεν δουλευει τελικα.
Το ταμπλετ δεν ειναι root.
Αναγνωριζει το στικ σαν χαλασμενη καρτα μνημης και αν δεν βγαλω την κανονικη καρτα μνημης κολλαει ολο το ταμπλετ.
Καμια ιδεα πως να το ξεκλειδωσω?
- - - Updated - - -
κανω αυτη τη διαδικασια που προτεινεται σε ξενο φορουμ για αντιστοιχο μοντεμ
1) Install modem drivers/software on your PC
2) Download Hyper Terminal ( just google it, you can download it on few sites ) and unpack it somewhere
3) Run Hyper Terminal - as a name of new connection enter anything you want, click OK
4) In next window named "Connect" in its last column "Connect using" select "HUAWEI Mobile Connect - 3G Modem" and click OK.
5) In next window with a phone number and other parameters press Cancel
6) Now select File -> Properties -> tab Options -> click on button ASCII Options -> tick second box named "Show input characters on the screen." Click OK twice.
7) Type AT, if you get response OK, that means your modem is communicating.
8) Type AT^U2DIAG? and note the number you get as response in case you ever want to change the settings of modem back
9) Type AT^U2DIAG=0 and press enter. If you get response OK, you just set up your modem to be acting only as a modem, not a card reader/CD drive
Now you can connect your 3G modem to USB port of your tablet and use it to connect to internet.
If you ever want to change the behavior of your modem back to way it was, follow this guide from beginning, but instead of AT^U2DIAG=0 use AT^U2DIAG=xxx - where xxx is number you got from AT^U2DIAG? command.
αλλα στο AT^U2DIAG? βγαζει error
Το ταμπλετ δεν ειναι root.
Αναγνωριζει το στικ σαν χαλασμενη καρτα μνημης και αν δεν βγαλω την κανονικη καρτα μνημης κολλαει ολο το ταμπλετ.
Καμια ιδεα πως να το ξεκλειδωσω?
- - - Updated - - -
κανω αυτη τη διαδικασια που προτεινεται σε ξενο φορουμ για αντιστοιχο μοντεμ
1) Install modem drivers/software on your PC
2) Download Hyper Terminal ( just google it, you can download it on few sites ) and unpack it somewhere
3) Run Hyper Terminal - as a name of new connection enter anything you want, click OK
4) In next window named "Connect" in its last column "Connect using" select "HUAWEI Mobile Connect - 3G Modem" and click OK.
5) In next window with a phone number and other parameters press Cancel
6) Now select File -> Properties -> tab Options -> click on button ASCII Options -> tick second box named "Show input characters on the screen." Click OK twice.
7) Type AT, if you get response OK, that means your modem is communicating.
8) Type AT^U2DIAG? and note the number you get as response in case you ever want to change the settings of modem back
9) Type AT^U2DIAG=0 and press enter. If you get response OK, you just set up your modem to be acting only as a modem, not a card reader/CD drive
Now you can connect your 3G modem to USB port of your tablet and use it to connect to internet.
If you ever want to change the behavior of your modem back to way it was, follow this guide from beginning, but instead of AT^U2DIAG=0 use AT^U2DIAG=xxx - where xxx is number you got from AT^U2DIAG? command.
αλλα στο AT^U2DIAG? βγαζει error