Επιστροφή στο Forum : wag 200 as access point
γεια χαρα
μια ερωτηση παρακαλω μπορω να χρησιμοποιησω το wag 200 san access point χωρις να ειναι μοντεμ ?
δηλαδη χωρις να εχω συνδεμενο τιποτα στην υποδοχη line αλλα μονο ενα λαν καλωδιο σε μια απο τις τεσεερις θυρες?
εχω ενα μικροκομ που θελω να εχω για μοντεμ και το wag 200 σε αλλο οροφο σαν ενα αcces point για ethernet kai wifi .
ευχαριστω
σατιρος:hmm: :hmm:
γεια χαρα
μια ερωτηση παρακαλω μπορω να χρησιμοποιησω το wag 200 san access point χωρις να ειναι μοντεμ ?
δηλαδη χωρις να εχω συνδεμενο τιποτα στην υποδοχη line αλλα μονο ενα λαν καλωδιο σε μια απο τις τεσεερις θυρες?
εχω ενα μικροκομ που θελω να εχω για μοντεμ και το wag 200 σε αλλο οροφο σαν ενα αcces point για ethernet kai wifi .
ευχαριστω
σατιρος:hmm: :hmm:
Tι εγινε παιδια κακος ρωτησα δεν απαντα κανενας?
κανενας που να ξερει?
geo: hi
geo: can i use the wag200g as an access point
Joeann (46197E): Hi Geo.
Joeann (46197E): Which devices do you have in your network?
geo: i mean without using the modem capabilities of the wag 200 just AS WIFI ETHERNET ROUTER
Joeann (46197E): Which device are you going to use behind the wag200g
geo: I HAVE A MICROCOM MODEM ON THE BASEMENT AND I WANT TO CONNECT IT THROUGH A HUB TO THE WAG 200 3 FLOORS UPSTAAIRS
Joeann (46197E): Allright.
geo: SORRY BUT WHAT ALRIGHT MEANS
geo: HOW TO SETUP?
Joeann (46197E): Are you going to be using wag200g as a repeater
geo: NO
geo: PC--HUB--MICROCOM
geo: PC---HUB--MICROCOM AND FROM THE HUB---WAG200
Joeann (46197E): Will you be attaching a cable from the HUB to the WAG200G
geo: YES LAN
Joeann (46197E): Okay.
geo: PC------HUB-------MICROCOM MODEM DHCHP
/ LAN
/
WAG200G
geo: CAN YOU PLEASE TELL IF I HAVE TO SET-UP
Joeann (46197E): In that case we can set the router up
geo: ANYTHING
Joeann (46197E): What is the ip address of the hub?
geo: THE MICROCOM IS A MODEM WITH DHCP
geo: THE HUB IS A 5 PORT 3COM HAS NO IP
Joeann (46197E): What is the ip address you get when a computer is connected to the modem?
geo: THE MICROCOM HAS AN IP 10.0.0.2
geo: DO I HAVE TO DISABLE THE WAG200 DHCP
Joeann (46197E): In that case you can disable DHCP of the router(wag200g) and set it's local ip to 10.0.0.5
geo: OK
Joeann (46197E): And do the wireless settings on the router(wag200g)
geo: WHAT ARE THE WIRELESS SETTINGS SPEED PROTOCOLS SECURITY DO YOU MEAN THAT?
Joeann (46197E): You can set up a WEP security with 64 bits/10 hex encryption
Joeann (46197E): Or even a 128bits/26 hex encryption.
geo: HOW CAN SET THE IP ON THE WAG200 SORRY I DONT HAVE IT RIGHT NOW IN FRONT OF ME
geo: I MEAN HOW TO SET THE LOCAL IP
Joeann (46197E): On the basic setup page you have an option at the mid bottom
Joeann (46197E): Local IP Address
Joeann (46197E): Which is set to 192.168.1.1 by default
Joeann (46197E): You can change the ip there
Joeann (46197E): And just below that you have the option 'DHCP Server'
Joeann (46197E): You can select the option 'disable' from there
Joeann (46197E): Did you get that geo?
Joeann (46197E): Are you there Geo?
geo: SO LET ME RECAP I SET THE LOCAL IP TO 10.0.0.5 CONNECT MY PC TO THE HUB (OBTAIN AUTOMATICLY SETTING(
Joeann (46197E): And also the hub has to be connected to the lan port of the router .
geo: THEN A LAN CABLE TO THE WAG 200
Joeann (46197E): Right.
geo: THEN THE HUB IS READY TO USE THE OTHER 3 PORTS BUT ALSO THE WIRELES CAPABILITIES
geo: SORY NOT THE HUB THE WAG 200 I MEANED
Joeann (46197E): Right.
Joeann (46197E): Be sure to visit our Knowledge Base located at http://www.linksys.com/kb. The site contains troubleshooting tips, how- to instructions, as well as solutions to common issues relating to all Linksys products.
geo: THANKS !!!!!!!!!!!! joeann I WILL TRY IT THIS AFTERNOON
Joeann (46197E): Welcome Geo.
Joeann (46197E): Thank you for giving us an opportunity to serve you through Live Chat Support. For your records, a transcript of this chat session will be e-mailed to you. Feel free to contact us if you require further assistance. Thank you for choosing Linksys and have a great day!
geo: CAUSE THE TOLD ME IT CAN BE USED AS AN ACCESS POINT WITHOUT USING THE MODEM CAPABILLITIES AT THE
geo: SAME TIME\
geo: THIS CAME FROM INTERNET PROVIDER FORTHNET GREECE
Joeann (46197E): It can be used as an ACCESS POINT only if it has a DHCP server behind connected to it.
geo: TECH SUPPORT
Joeann (46197E): Allright
geo: HAVE A NICE DAY
Joeann (46197E): You too
Joeann (46197E): Bye.
geo: BYE
geo: hi
geo: can i use the wag200g as an access point
Joeann (46197E): Hi Geo.
Joeann (46197E): Which devices do you have in your network?
geo: i mean without using the modem capabilities of the wag 200 just AS WIFI ETHERNET ROUTER
Joeann (46197E): Which device are you going to use behind the wag200g
geo: I HAVE A MICROCOM MODEM ON THE BASEMENT AND I WANT TO CONNECT IT THROUGH A HUB TO THE WAG 200 3 FLOORS UPSTAAIRS
Joeann (46197E): Allright.
geo: SORRY BUT WHAT ALRIGHT MEANS
geo: HOW TO SETUP?
Joeann (46197E): Are you going to be using wag200g as a repeater
geo: NO
geo: PC--HUB--MICROCOM
geo: PC---HUB--MICROCOM AND FROM THE HUB---WAG200
Joeann (46197E): Will you be attaching a cable from the HUB to the WAG200G
geo: YES LAN
Joeann (46197E): Okay.
geo: PC------HUB-------MICROCOM MODEM DHCHP
/ LAN
/
WAG200G
geo: CAN YOU PLEASE TELL IF I HAVE TO SET-UP
Joeann (46197E): In that case we can set the router up
geo: ANYTHING
Joeann (46197E): What is the ip address of the hub?
geo: THE MICROCOM IS A MODEM WITH DHCP
geo: THE HUB IS A 5 PORT 3COM HAS NO IP
Joeann (46197E): What is the ip address you get when a computer is connected to the modem?
geo: THE MICROCOM HAS AN IP 10.0.0.2
geo: DO I HAVE TO DISABLE THE WAG200 DHCP
Joeann (46197E): In that case you can disable DHCP of the router(wag200g) and set it's local ip to 10.0.0.5
geo: OK
Joeann (46197E): And do the wireless settings on the router(wag200g)
geo: WHAT ARE THE WIRELESS SETTINGS SPEED PROTOCOLS SECURITY DO YOU MEAN THAT?
Joeann (46197E): You can set up a WEP security with 64 bits/10 hex encryption
Joeann (46197E): Or even a 128bits/26 hex encryption.
geo: HOW CAN SET THE IP ON THE WAG200 SORRY I DONT HAVE IT RIGHT NOW IN FRONT OF ME
geo: I MEAN HOW TO SET THE LOCAL IP
Joeann (46197E): On the basic setup page you have an option at the mid bottom
Joeann (46197E): Local IP Address
Joeann (46197E): Which is set to 192.168.1.1 by default
Joeann (46197E): You can change the ip there
Joeann (46197E): And just below that you have the option 'DHCP Server'
Joeann (46197E): You can select the option 'disable' from there
Joeann (46197E): Did you get that geo?
Joeann (46197E): Are you there Geo?
geo: SO LET ME RECAP I SET THE LOCAL IP TO 10.0.0.5 CONNECT MY PC TO THE HUB (OBTAIN AUTOMATICLY SETTING(
Joeann (46197E): And also the hub has to be connected to the lan port of the router .
geo: THEN A LAN CABLE TO THE WAG 200
Joeann (46197E): Right.
geo: THEN THE HUB IS READY TO USE THE OTHER 3 PORTS BUT ALSO THE WIRELES CAPABILITIES
geo: SORY NOT THE HUB THE WAG 200 I MEANED
Joeann (46197E): Right.
Joeann (46197E): Be sure to visit our Knowledge Base located at http://www.linksys.com/kb. The site contains troubleshooting tips, how- to instructions, as well as solutions to common issues relating to all Linksys products.
geo: THANKS !!!!!!!!!!!! joeann I WILL TRY IT THIS AFTERNOON
Joeann (46197E): Welcome Geo.
Joeann (46197E): Thank you for giving us an opportunity to serve you through Live Chat Support. For your records, a transcript of this chat session will be e-mailed to you. Feel free to contact us if you require further assistance. Thank you for choosing Linksys and have a great day!
geo: CAUSE THE TOLD ME IT CAN BE USED AS AN ACCESS POINT WITHOUT USING THE MODEM CAPABILLITIES AT THE
geo: SAME TIME\
geo: THIS CAME FROM INTERNET PROVIDER FORTHNET GREECE
Joeann (46197E): It can be used as an ACCESS POINT only if it has a DHCP server behind connected to it.
geo: TECH SUPPORT
Joeann (46197E): Allright
geo: HAVE A NICE DAY
Joeann (46197E): You too
Joeann (46197E): Bye.
geo: BYE
EYXARISTO ΕΛΠΙΖΩ ΝΑ ΒΟΗΘΗΣΕΙ ΚΑΙ ΚΑΠΟΙΟΥΣ ΑΛΛΟΥΣ
satiros
@ ADSLgr.com All rights reserved.