PDA

Επιστροφή στο Forum : Περί ROS ο λόγος...



Σελίδες : 1 2 3 4 5 6 7 8 9 [10] 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

deniSun
19-01-20, 14:22
Γιατι θα σε χαλαγε αυτο deni?

Αν είχε επιλογή για auto και manual... όχι.
Αν είχε μόνο auto... ναι.

deniSun
29-01-20, 13:12
6.45.8 changelog:


Changes since 6.45.7:

*) capsman - fixed background scan showing incorrect regulatory domain mismatch error (CAP upgrade required);
*) capsman - improved radar detection algorithm;
*) chr - improved stability when changing ARP modes on e1000 type adapters;
*) console - fixed "clear-history" restoring historic actions after power cycle;
*) console - removed "edit" and "set" actions from "System/History" menu;
*) console - updated copyright notice;
*) crs305 - disable optical SFP/SFP+ module Tx power after disabling SFP+ interface;
*) dhcpv4-server - improved stability when RADIUS interim update is sent;
*) dhcpv6-client - fixed timeout when doing rebind;
*) dhcpv6-client - properly update bind time when unused prefix received from the server;
*) dhcpv6-client - properly update IPv6 address on rebind;
*) dhcpv6-server - fixed logged error message when using "address-pool=static-only";
*) dhcpv6-server - ignore prefix-hint from client's DHCPDISCOVER if static prefix received from RADIUS;
*) health - fixed health reporting on OmniTIK 5 PoE ac;
*) ipsec - improved system stability when processing decrypted packet on unregistered interface;
*) l2tp - improved system stability when disconnecting many clients at once;
*) led - fixed default LED configuration for RBLHG-2nD and RBLHG-5HPnD;
*) lte - show SIM error when no card is present;
*) ppp - fixed connection establishment when receiving "0.0.0.0" DNS;
*) ppp - fixed minor typo in "ppp-client" monitor;
*) ppp - prioritize "remote-ipv6-prefix-pool" from PPP secret over PPP profile;
*) qsfp - do not report bogus monitoring readouts on modules without DDMI support;
*) qsfp - improved module monitoring readouts for DAC and break-out cables;
*) routerboard - added "mode-button" support for RBcAP2nD;
*) security - fixed vulnerability for routers with default password (limited to Wireless Wire), admin could login on startup with empty password before default configuration script was fully loaded;
*) ssh - fixed output printing when "command" parameter used;
*) timezone - updated time zone database to version 2019c;
*) traffic-generator - improved memory handling on CHR;
*) w60g - fixed "monitor" command on disabled interfaces;
*) winbox - automatically refresh "Packets" table when new packets are captured by "Tools/Packet Sniffer";
*) winbox - show "LCD" menu only on boards that have LCD screen;
*) wireless - added "ETSI" regulatory domain information;
*) wireless - added "indonesia4" regulatory domain information;
*) wireless - added U-NII-2 support forRBSXTsqG-5acD, RBLHGG-5acD-XL, RBLHGG-5acD, RBLDFG-5acD, RBDiscG-5acD;
*) wireless - allow using "canada2" regulatory domain on US lock devices;
*) wireless - fixed sensor MAC address reporting in TZSP header;
*) wireless - improved compatibility by adding default installation mode and antenna gain for devices with integrated antennas;
*) wireless - improved compatibility for Switzerland wireless country profile to improve compliance with ETSI regulations;
*) wireless - improved IPQ4019, QCA9984, QCA9888 wireless interface stability;

Nikiforos
29-01-20, 20:59
Η παραπανω εκδοση ειναι η Long-Term, ειπα και εγω ποτε βγηκε η STABLE και δεν την ειδα....

jkarabas
29-01-20, 21:29
Η παραπανω εκδοση ειναι η Long-Term, ειπα και εγω ποτε βγηκε η STABLE και δεν την ειδα....

Το ίδιο έπαθα και εγώ.

Nikiforos
29-01-20, 22:32
Το ίδιο έπαθα και εγώ.

Ναι μπηκα στην σελιδα να κατεβασω τα αρχεια αρχικα και εφαγα ακυρο, γιαυτο καλο ειναι οταν λεμε για καποια αναβαθμιση να γραφουμε και ποια ειναι.
Δεν εχουμε ολοι την long-term, οι περισσοτεροι βασικα πιστευω οτι εχουν την stable.

Βtw πρεπει καποια στιγμη να ασχοληθω να περναω τις αναβαθμισεις απο το dude server, ειναι πολυ βαρετο αναβαθμιση τοσα rbs καθε φορα και χρονοβορο επισης.

bannedteam
30-01-20, 16:32
Ναι μπηκα στην σελιδα να κατεβασω τα αρχεια αρχικα και εφαγα ακυρο, γιαυτο καλο ειναι οταν λεμε για καποια αναβαθμιση να γραφουμε και ποια ειναι.
Δεν εχουμε ολοι την long-term, οι περισσοτεροι βασικα πιστευω οτι εχουν την stable.

Βtw πρεπει καποια στιγμη να ασχοληθω να περναω τις αναβαθμισεις απο το dude server, ειναι πολυ βαρετο αναβαθμιση τοσα rbs καθε φορα και χρονοβορο επισης.

υπάρχει και script που το κάνει αυτόματα

Nikiforos
30-01-20, 18:18
υπάρχει και script που το κάνει αυτόματα

α δεν το ξερω αυτο!

jkarabas
30-01-20, 19:11
α δεν το ξερω αυτο!

Με μια γρήγορη ματιά (ούτε και εγώ το γνώριζα)

https://raw.githubusercontent.com/beeyev/Mikrotik-RouterOS-automatic-backup-and-update/master/BackupAndUpdate.rsc

https://github.com/beeyev/Mikrotik-RouterOS-automatic-backup-and-update

Nikiforos
30-01-20, 22:56
Με μια γρήγορη ματιά (ούτε και εγώ το γνώριζα)

https://raw.githubusercontent.com/beeyev/Mikrotik-RouterOS-automatic-backup-and-update/master/BackupAndUpdate.rsc

https://github.com/beeyev/Mikrotik-RouterOS-automatic-backup-and-update

Ωραιος, thanks! αλλα θα προτιμησω να το κανω με το Dude απο το hap ac2. Το θεμα ειναι με τα FW τι γινεται? εκει μπορει να γινει αυτοματοποιημενη η διαδικασια?

x_undefined
30-01-20, 23:14
Αν δεις το πρώτο script κάνει και firmware upgrade μετά το 1ο reboot.

Nikiforos
30-01-20, 23:27
Αν δεις το πρώτο script κάνει και firmware upgrade μετά το 1ο reboot.

Ναι δεν ξερω απο scripts δεν τα καταλαβαινω και δεν το ειδα, αλλα ειναι τεραστιο! το εχει δοκιμασει κανεις αν παιζει?

Και εδω σχετικα με το dude για οσους εχουν : https://wiki.mikrotik.com/wiki/Upgrading_RouterOS_with_Dude αλλα δεν αναφερει για το FW.

Tα λένε και εδω και σχετικα με scripts : https://forum.mikrotik.com/viewtopic.php?t=122839

χμμμ οποτε μπορω Dude για την ROS και script για τα FW.

bannedteam
31-01-20, 11:01
βασικά εγώ μιλούσα για κάτι πιο απλο που το τρέχεις καθε μερα μεσω scheduler και είναι το παρακάτω

/system package update
check-for-updates once
:delay 3s;
:if ( [get status] = "New version is available") do={ install }

jkarabas
31-01-20, 13:19
βασικά εγώ μιλούσα για κάτι πιο απλο που το τρέχεις καθε μερα μεσω scheduler και είναι το παρακάτω

/system package update
check-for-updates once
:delay 3s;
:if ( [get status] = "New version is available") do={ install }

Μια χαρά και αυτό αλλά επειδή με κάθε νέα ROS πρέπει να κάνεις και update το firmaware για αυτό το λόγο.

deniSun
06-02-20, 19:35
6.46.3 [stable] changelog:

*) hotspot - fixed redirect to log in page (introduced in v6.45);
*) lora - added "ru-864-mid" channel plan;
*) lora - improved immediate packet delivery;
*) lte - added GPS port support for Quectel EP06 modem;
*) lte - added "psc" (Primary Scrambling Code) parameter for "cell-monitor" function on R11e-LTE6 and R11e-LTE;
*) lte - do not show invalid "phy-cellid" when it is not yet received on "R11e-LTE";
*) lte - do not show unrelated info parameters after network mode failover;
*) port - fixed multiple identical USB serial device detection (introduced in v6.46);
*) ppp - fixed connection establishment when receiving "0.0.0.0" DNS;
*) snmp - fixed "ifOperStatus" reporting for combo ports;
*) winbox - removed duplicate "counter", "chain", "size" and "payload" parameters under "LoRa/Traffic";

deniSun
27-02-20, 14:50
What's new in 6.46.4 (2020-Feb-21 11:26) [stable]:

Important note!!!

- The Dude server must be updated to monitor 6.46.4 and v6.47beta30+ RouterOS type devices.
- The Dude client must be manually upgraded after upgrading The Dude server.

Changes in this release:


*) arm - improved watchdog and kernel panic reporting in log after reboots on RB3011 and IPQ4018/IPQ4019 devices ("/system routerboard upgrade" required);
*) branding - allow forcing configuration script as default configuration (new branding packet required);
*) branding - fixed "company-url" and "router-default-name" survival after system upgrade;
*) branding - fixed WEB HTML page survival after system upgrade;
*) certificate - fixed certificate verification when flushing CRL's;
*) chr - fixed graceful shutdown execution on Hyper-V (introduced in v6.46);
*) console - fixed script with "dont-require-permissions=yes" execution without sufficient permissions;
*) crs3xx - fixed frame forwarding after disabling/enabling bridge hardware offloading for CRS354-48G-4S+2Q+ device;
*) defconf - added welcome note with common first steps for new users;
*) dude - updated The Dude to use new style authentication method;
*) health - fixed maximum SFP temperature reading under '/system health' menu;
*) ike2 - fixed DHCP Inform package handling when received on PPPoE interface;
*) lte - added interface name prefix for logging events;
*) lte - added "phy-cellid" value support for R11e-LTE-US;
*) lte - do not allow using empty APN Profile names;
*) lte - improved all APN session activation after disconnect on R11e-LTE;
*) lte - use APN from network when blank APN used on R11e-4G;
*) snmp - fixed "routeros-version" value returning from registration table;
*) snmp - fixed UPS battery voltage value scaling;
*) ssh - added support for RSA keys with SHA256 hash (RFC8332);
*) system - improved system stability when receiving/sending TCP traffic on multicore devices;
*) telnet - improved telnet compatibility with other client implementations;
*) user-manager - fixed signup enabling (introduced in v6.46);
*) webfig - added default configuration confirmation window to WebFig;
*) webfig - do not show WebFig menu when opening 'Check For Updates' in Quick Set;
*) winbox - fixed "invalid" flag presence under "System/Certificates/CRL" menu;
*) wireless - improved compatibility for "ETSI" wireless country profile;

Nikiforos
27-02-20, 15:04
- The Dude server must be updated to monitor 6.46.4 and v6.47beta30+ RouterOS type devices.
- The Dude client must be manually upgraded after upgrading The Dude server.

Αυτά με το dude δεν καταλαβαίνω γιατι τα λεει, παντα ισχυαν…

Πρεπει να κατσω να μαθω πως αναβαθμίζουμε μεσω Dude όλα τα rbs, αλλα το FW παλι χειροκίνητα πρεπει. :twisted:

minas
27-02-20, 22:30
- The Dude server must be updated to monitor 6.46.4 and v6.47beta30+ RouterOS type devices.
- The Dude client must be manually upgraded after upgrading The Dude server.

Αυτά με το dude δεν καταλαβαίνω γιατι τα λεει, παντα ισχυαν…

Πρεπει να κατσω να μαθω πως αναβαθμίζουμε μεσω Dude όλα τα rbs, αλλα το FW παλι χειροκίνητα πρεπει. :twisted:

Έχουν υπάρξει εκδόσεις ROS που δεν σπάνε συμβατότητα με παλιότερο Dude.

Nikiforos
27-02-20, 23:06
Έχουν υπάρξει εκδόσεις ROS που δεν σπάνε συμβατότητα με παλιότερο Dude.

Δεν το ξερω απο τοτε που πηρα το hap ac2 και το υποστηριζει και το εχω στησει, παντα αναβαθμιζω και dude server-client σε καθε εκδοση STABLE παντα της ROS.
Oπως και τωρα τα αναβαθμισα ολα και το dude. Oποτε δεν το εχω δοκιμασει να δω αν παιζουν με παλιοτερη εκδοση του.

macro
28-02-20, 09:49
Nik. εσενα σου δουλευει ο dude server? Στο φορουμ τους βλεπω οτι πολλοι εχουν θεμα.

Nikiforos
28-02-20, 18:53
Nik. εσενα σου δουλευει ο dude server? Στο φορουμ τους βλεπω οτι πολλοι εχουν θεμα.

Καλησπέρα, εννοεις με τη νεα ROS? γιατι ναι μεν τα εγκατεστησα χτες αλλα δεν ανοιξα να δω μετα.
Εγω παιζω με Linux desktop αλλα το ετρεχα μια χαρα μεσω wine.
Θα το δω όταν παω σπιτι μετα.

- - - Updated - - -

καλησπερα παλι, τελικα παιζει μια χαρα ο DUDE μου με τη νεα ROS.

deniSun
03-04-20, 16:40
6.47beta53 changelog:
Important note!!!

- The Dude server must be updated to monitor v6.46.4 and v6.47beta30+ RouterOS type devices.
- The Dude client must be manually upgraded after upgrading The Dude server.
- Make sure LTE APN Profile name does not match any of the DHCP server's names if LTE passthrough is used.
- The Dude requires "winbox" policy instead of "dude" to monitor v6.46.4 and v6.47beta30+ RouterOS type devices.

MAJOR CHANGES IN v6.47:
----------------------
!) dns - added client side support for DNS over HTTPS (DoH) (RFC8484);
!) socks - added support for SOCKS5 (RFC 1928);
!) user - enable "winbox" policy for groups with "dude" policy;
----------------------

Changes in this release:


!) socks - added support for SOCKS5 (RFC 1928);
*) branding - do not ask to confirm configuration applied from branding package;
*) certificate - added "skid" and "akid" values for detailed print;
*) certificate - allow dynamic CRL removal;
*) console - prevent incorrect type interfaces appearing in command hints;
*) crs3xx - fixed QSFP interface linking after removing/inserting QSFP module (introduced in v6.47beta49);
*) dhcpv4-server - disallow zero lease-time setting;
*) filesystem - fixed NAND memory going into read-only mode or becoming unstable over time;
*) ike1 - improved policy lookup with specific protocol;
*) ike1 - rekey phase 1 rekeying as responder for Windows initiators;
*) ipsec - improved system stability when handling fragmented packets;
*) kidcontrol - ignore IPv6 multicast MAC addresses;
*) lora - added IPv6 support for LoRa packet forwarder;
*) lora - added UTC timestamp for RX events in "rxpk" json;
*) lte - added support for Huawei K5161 modem;
*) lte - fixed IP type selection from APN on RBSXTLTE3-7;
*) snmp - fixed multiple LTE interface OID reporting;
*) system - improved kernel panic reporting in logs after reboot;
*) wireless - added "russia 6ghz" regulatory domain information;
*) wireless - added "skip-dfs-channels" parameter;
*) wireless - updated "bangladesh" regulatory domain information;
*) wireless - updated "russia4" regulatory domain information;

deniSun
06-04-20, 13:35
6.47beta54 changelog:


Changes in this release:

*) wireless - improved 5GHz interface stability on RB4011iGS+5HacQ2HnD and Audience;
*) wireless - improved system stability on hAP ac^2;

Nikiforos
06-04-20, 16:55
τις beta τις γραφουμε εδω : https://www.adslgr.com/forum/threads/1042376-Mikrotik-ROS-RC-version-%CF%83%CF%85%CE%B6%CE%B7%CF%84%CE%AE%CF%83%CE%B5%CE%B9%CF%82-bugs-%CE%BA%CF%84%CE%BB/page6

deniSun
08-04-20, 17:21
6.46.5 changelog:
Important note!!!

- The Dude server must be updated to monitor v6.46.4+ and v6.47beta30+ RouterOS type devices.
- The Dude client must be manually upgraded after upgrading The Dude server.
- The Dude requires "winbox" policy instead of "dude" to monitor v6.46.4+ and v6.47beta30+ RouterOS type devices.

MAJOR CHANGES IN v6.46.5:
----------------------
!) user - enable "winbox" policy for groups with "dude" policy;
----------------------

Changes in this release:


*) capsman - fixed "certificate" parameter updating on CAP;
*) console - prevent incorrect type interfaces appearing in command hints;
*) crs3xx - fixed interface statistics for CRS354-48G-4S+2Q+ and CRS354-48P-4S+2Q+ devices;
*) crs3xx - fixed traffic forwarding after disabling/enabling bridge hardware offloading for CRS354-48G-4S+2Q+ and CRS354-48P-4S+2Q+ devices;
*) crs3xx - improved SFP+ DAC cable initialization for CRS326-24S+2Q+ device;
*) discovery - do not send CDP and LLDP packets on interfaces that does not have MAC address;
*) dude - fixed connection to other RouterOS type devices through The Dude agents (introduced in v6.46.4);
*) ike1 - rekey phase 1 rekeying as responder for Windows initiators;
*) ipsec - improved system stability when handling fragmented packets;
*) led - added "dark-mode" functionality for CRS105-5S-FB;
*) lora - added IPv6 support for LoRa packet forwarder;
*) lora - added UTC timestamp for RX events in "rxpk" json;
*) lora - added value limits for "freq-off" parameter;
*) lora - properly update source address for packets when routing table is changed;
*) lte - fixed IP type selection from APN on RBSXTLTE3-7;
*) sniffer - fixed minor typo in "host" menu;
*) supout - added "gps" section to supout files;
*) supout - improved PoE-out information reporting;
*) system - improved kernel panic reporting in logs after reboot;
*) system - improved system stability when forwarding traffic from switch chip to CPU (introduced in v6.43);
*) traceroute - improved stability when invalid packet is received;
*) traffic-generator - improved statistics reporting;
*) w60g - improved stability after multiple disconnections;
*) winbox - added "Options" parameter support for DHCPv6 client and server;
*) winbox - added 160Mhz extension channel support for CAPsMAN;
*) winbox - added support for "Tools->WoL" menu;
*) winbox - allow setting "20/40/80/160Mhz-eeeeeeCe" channel under "Channel Width" parameter;
*) winbox - do not show "Revision" parameter under "System/RouterBOARD" menu on devices that have only one revision;
*) winbox - fixed "ARP" parameter inheritance from "CAPs Configuration" configuration;
*) winbox - fixed "Bands" parameter display for LTE interfaces;
*) winbox - fixed "DSCP" parameter value setting;
*) winbox - fixed "Frequency" and "Secondary Frequency" parameter inheritance from "CAPs Channel" configuration;
*) winbox - fixed "Passthr. MAC Address" parameter display "LTE APNs" menu;
*) winbox - fixed "Switch" menu on CRS354-48P-4S+2Q+;
*) winbox - fixed "dst-port" unsetting in "IP->Hotspot->Walled Garden" menu;
*) winbox - fixed automatic "IPv6->Firewall->Address List" table update;
*) winbox - made "none" the default value for "Security Profile" parameter when creating a new "Wirelees->Connect list" entry;
*) winbox - properly show "Hw. Offload Group" value for each interface under "Bridge->Ports" menu;
*) winbox - renamed "Memory used" to "HDD used" for HDD type under "Tools->Graphing->Resource Graphs";
*) winbox - show "System/RouterBOARD/Mode Button" on devices that have such feature;
*) wireless - added "U-NII-2" support for hAP ac2 and RBwAPGR series devices;
*) wireless - added "skip-dfs-channels" parameter;
*) wireless - fixed default "antenna-gain" setting on SXT 2 and LtAP series devices;
*) wireless - updated "bangladesh" regulatory domain information;
*) wireless - updated "indonesia4" regulatory domain information;

Nikiforos
08-04-20, 19:24
Τωρα με την καραντινα δεν μπορουμε να αναβαθμιζουμε και τα απομακρυσμενα μηχανηματα, αν χαλασει τιποτα την βαψαμε απλα...
Βλεπω και πραγματακια για τον φιλο μου τον ντουντη...:p

αυτη η lora (καμια σχεση με την γνωστη lara...) εχει κανει εμφανιση νομιζω τωρα τελευταια αλλα δεν την εχω ψαξει τι ακριβως ειναι, αλλα oπως βλεπω εδω δεν με αφορα το πακετο δεν εχω κατι τετοιο https://wiki.mikrotik.com/wiki/Manual:Interface/Lora

Space21
08-04-20, 21:53
αυτη η lora


LoRaWAN

https://en.wikipedia.org/wiki/LoRa

Nikiforos
09-04-20, 06:40
LoRaWAN

https://en.wikipedia.org/wiki/LoRa

Καλημέρα, στις αναβαθμίσεις γραφει ΜΟΝΟ lora δες παραπανω



*) lora - added IPv6 support for LoRa packet forwarder;
*) lora - added UTC timestamp for RX events in "rxpk" json;
*) lora - added value limits for "freq-off" parameter;
*) lora - properly update source address for packets when routing table is changed;


Επισης εδειξα την σελιδα του WIKI του winbox, και ειπα ότι δεν αφορα εμενα οποτε προφανως διαβασα τι είναι ? https://wiki.mikrotik.com/wiki/Manual:Interface/Lora

Every RouterBOARD with a miniPCI-e interface which supports LTE modems could also be turn in LoRaWAN gateway by installation of R11e-LoRa8 or R11e-LoRa9 card.


Μαλιστα αυτό το συστημα χρησιμοποιει ο δημος Αθηναιων πχ στο Κολωνακι για συστημα ελεγχου στάθμευσης, ειδα και φωτος και ειπαν ότι είναι συστημα τετοιο τελικα.

deniSun
28-04-20, 16:41
What's new in 6.46.6 (2020-Apr-27 10:32):

Important note!!!

- The Dude server must be updated to monitor v6.46.4+ and v6.47beta30+ RouterOS type devices.
- The Dude client must be manually upgraded after upgrading The Dude server.
- The Dude requires "winbox" policy instead of "dude" to monitor v6.46.4+ and v6.47beta30+ RouterOS type devices.

Changes in this release:


*) crs3xx - fixed switch rule "dst-port" parameter for IPv6 traffic on CRS305-1G-4S+, CRS326-24G-2S+, CRS328-24P-4S+, CRS328-4C-20S-4S+, netPower 15FR devices;
*) defconf - fixed default IP address assigning on non-paired 60 GHz devices;
*) lora - added "altitude", "latitude" and "longitude" to stat json if GPS is available;
*) lte - fixed "band" value setting when configuration is reset on R11e-4G;
*) snmp - fixed "ifSpeed" reporting for tunnel interfaces;
*) snmp - fixed multiple LTE interface OID reporting;
*) ssh - fixed SHA256 user authentication algorithm checking (introduced in v6.46.4);
*) winbox - fixed memory leak (introduced in v6.46.4);
*) winbox - increased limit of multi-entry fields to 100;
*) wireless - improved 5GHz interface stability on RB4011iGS+5HacQ2HnD and Audience;
*) wireless - improved system stability on hAP ac^2;
*) wireless - updated "south africa" regulatory domain information;

macro
29-04-20, 11:08
Πολλα θεματα με το wireless διαβαζω και σε αυτη την εκδοση............ τη προσπερναω προς το παρον. Ειδικα για τα hap ac2

Nikiforos
29-04-20, 16:26
Πολλα θεματα με το wireless διαβαζω και σε αυτη την εκδοση............ τη προσπερναω προς το παρον. Ειδικα για τα hap ac2

καλησπερα, για πες δλδ? γιατι την περναω τωρα παντου.

deniSun
29-04-20, 16:31
Εμένα ακόμα να μου βρει λύση για αυτό (https://www.adslgr.com/forum/threads/1155211-RB4011-switch-ports-reset).
Μου απάντησαν μετά από πολλές μέρες καθυστέρηση.
Μου ζήτησαν και τους έστειλα 2-3 supout και εδώ και 1 εβδομάδα ακόμα περιμένω απάντηση.

BillyVan
30-04-20, 11:15
καλησπερα, για πες δλδ? γιατι την περναω τωρα παντου.

Στο φορουμ τους αναφερει ενας.

Some of my routers are HAP AC2. Not getting worse but not any better.
I can tell if 6.43.16 still faster n more stable than 6.44.6 to 6.46.6.
Problem? Yes.
1. Sometimes wireless G cant connect, while wireless N can always connect n working just fine. Mode bgn. 6.43.16 dont have this issue.
2. Some installation at office building with alot of noise, 6.43.16 perform better for 2.4ghz.
3. PPTP from android phone, will go disconnect in few mins. With 6.43.16, the same phone can connected for hours without any problem.
Most installation still with 6.43.16 n will stay at 6.43.16 until MT can make another real stable version.

Nikiforos
30-04-20, 16:12
Στο φορουμ τους αναφερει ενας.

Some of my routers are HAP AC2. Not getting worse but not any better.
I can tell if 6.43.16 still faster n more stable than 6.44.6 to 6.46.6.
Problem? Yes.
1. Sometimes wireless G cant connect, while wireless N can always connect n working just fine. Mode bgn. 6.43.16 dont have this issue.
2. Some installation at office building with alot of noise, 6.43.16 perform better for 2.4ghz.
3. PPTP from android phone, will go disconnect in few mins. With 6.43.16, the same phone can connected for hours without any problem.
Most installation still with 6.43.16 n will stay at 6.43.16 until MT can make another real stable version.

Καλησπέρα, ευχαριστω, προς το παρον απο χτες που το εβαλα οσο το δοκιμασα δεν ειδα προβλημα στο wireless 2,4 και 5ghz και pptp δεν εχω εδω και χρονια.
Στο 109 τωρα που παιζει OVPN server + client κανενα προβλημα ομως.

deniSun
07-05-20, 17:50
6.45.9 Long Term changelog :
Changes since 6.45.8:


*) arm - improved watchdog and kernel panic reporting in log after reboots on RB3011 and IPQ4018/IPQ4019 devices ("/system routerboard upgrade" required);
*) capsman - fixed "certificate" parameter updating on CAP;
*) certificate - fixed certificate verification when flushing CRL's;
*) chr - added support for file system quiescing;
*) chr - enabled support for VMBus protocol version 4.1;
*) chr - fixed graceful shutdown execution on Hyper-V (introduced in v6.46);
*) chr - improved system stability when running CHR on Hyper-V;
*) console - prevent incorrect type interfaces appearing in command hints;
*) crs3xx - fixed frame forwarding after disabling/enabling bridge hardware offloading for CRS354-48G-4S+2Q+ device;
*) crs3xx - fixed interface statistics for CRS354-48G-4S+2Q+ and CRS354-48P-4S+2Q+ devices;
*) crs3xx - fixed switch rule "dst-port" parameter for IPv6 traffic on CRS305-1G-4S+, CRS326-24G-2S+, CRS328-24P-4S+, CRS328-4C-20S-4S+, netPower 15FR devices;
*) crs3xx - improved SFP+ DAC cable initialization for CRS326-24S+2Q+ device;
*) defconf - added welcome note with common first steps for new users;
*) discovery - do not send CDP and LLDP packets on interfaces that does not have MAC address;
*) health - fixed maximum SFP temperature reading under '/system health' menu;
*) hotspot - fixed redirect to log in page (introduced in v6.45);
*) ike1 - rekey phase 1 rekeying as responder for Windows initiators;
*) ipsec - improved system stability when handling fragmented packets;
*) led - added "dark-mode" functionality for CRS105-5S-FB;
*) lte - added "phy-cellid" value support for LTE-US;
*) lte - fixed IP type selection from APN on RBSXTLTE3-7;
*) lte - improved system stability when performing firmware update on R11e-LTE6;
*) sniffer - fixed minor typo in "host" menu;
*) snmp - fixed "ifSpeed" reporting for tunnel interfaces;
*) snmp - fixed "routeros-version" value returning from registration table;
*) snmp - fixed UPS battery voltage value scaling;
*) ssh - added support for RSA keys with SHA256 hash (RFC8332);
*) system - correctly handle Generic Receive Offloading (GRO) for MPLS traffic;
*) system - improved system stability when forwarding traffic from switch chip to CPU (introduced in v6.43);
*) system - improved system stability when receiving/sending TCP traffic on multicore devices;
*) traceroute - improved stability when invalid packet is received;
*) webfig - added default configuration confirmation window to WebFig;
*) webfig - allow skin designing without "ftp" and "sensitive" policies;
*) webfig - do not show WebFig menu when opening 'Check For Updates' in Quick Set;
*) winbox - added "Options" parameter support for DHCPv6 client and server;
*) winbox - added 160Mhz extension channel support for CAPsMAN;
*) winbox - added support for "Tools->WoL" menu;
*) winbox - do not show "Revision" parameter under "System/RouterBOARD" menu on devices that have only one revision;
*) winbox - fixed "ARP" parameter inheritance from "CAPs Configuration" configuration;
*) winbox - fixed "Bands" parameter display for LTE interfaces;
*) winbox - fixed "DSCP" parameter value setting;
*) winbox - fixed "Frequency" and "Secondary Frequency" parameter inheritance from "CAPs Channel" configuration;
*) winbox - fixed "Passthr. MAC Address" parameter display "LTE APNs" menu;
*) winbox - fixed "Switch" menu on CRS354-48P-4S+2Q+;
*) winbox - fixed "dst-port" unsetting in "IP->Hotspot->Walled Garden" menu;
*) winbox - fixed "invalid" flag presence under "System/Certificates/CRL" menu;
*) winbox - fixed automatic "IPv6->Firewall->Address List" table update;
*) winbox - increased limit of multi-entry fields to 100;
*) winbox - made "none" the default value for "Security Profile" parameter when creating a new "Wirelees->Connect list" entry;
*) winbox - renamed "Memory used" to "HDD used" for HDD type under "Tools->Graphing->Resource Graphs";
*) winbox - renamed "Routerboard" to "RouterBOARD" under "System/RouterBOARD" menu;
*) winbox - show "System/RouterBOARD/Mode Button" on devices that have such feature;
*) wireless - added "skip-dfs-channels" parameter;
*) wireless - allow using FCC "U-NII-2" frequency range for hAP ac2 and RBwAPGR series devices;
*) wireless - fixed default "antenna-gain" setting on SXT 2 devices;
*) wireless - improved 5GHz interface stability on RB4011iGS+5HacQ2HnD and Audience;
*) wireless - improved compatibility for "ETSI" wireless country profile;
*) wireless - improved system stability on hAP ac^2;
*) wireless - updated "bangladesh" regulatory domain information;
*) wireless - updated "indonesia4" regulatory domain information;
*) wireless - updated "south africa" regulatory domain information;

deniSun
18-05-20, 16:58
winbox
What's new in v3.24:


*) fixed WinBox crash when viewing firewall rule with src/dst-address-type configured;
*) fixed checkbox group disabled state inheritance;
*) fixed dates and times in interface link up/down properties (RouterOS v6.47 required);
*) fixed system comment message display;
*) fixed vertical font alignment in optional fields;
*) fixed window size inheritance from the previous session;
*) keep advanced and simple mode table settings separately;
*) make WinBox upgrade work with wine 5.0 or newer;
*) properly show popup windows on top;

macro
18-05-20, 17:26
To window size φτιαχτηκε σιγουρα? Γιατι ετσι λεγανε και για το 3.23........

deniSun
18-05-20, 20:32
To window size φτιαχτηκε σιγουρα? Γιατι ετσι λεγανε και για το 3.23........

Όχι. Είναι οκ.
Το δοκίμασα.
Έκανα resize παράθυρο και το κράτησε.
Επίσης άνοιξα/έκλεισα και όλα έμειναν όπως πριν.

jkarabas
19-05-20, 09:39
Όχι. Είναι οκ.
Το δοκίμασα.
Έκανα resize παράθυρο και το κράτησε.
Επίσης άνοιξα/έκλεισα και όλα έμειναν όπως πριν.

Καλημέρα
Άντε επιτέλους!!!

geioannou
23-05-20, 20:14
Καλησπερα. ενδιαφερομαι να κανω μια αγορα ενος MikroTik hAP ac². Μπορει καποιος να μου πει εαν γνωριζει εαν εχει επιλογη πολλαπλων SSID ?
Φανταζομαι θα γινεται ειτε σαν απ' ευθειας εντολη ειτε σαν virtual AP, αλλα μπορει να επιβεβαιωσει καποιος ?
ευχαριστω

zark
23-05-20, 20:27
Πέρα από τα 2 ξεχωριστά wireless interfaces που έχει για 5ghz και 2.4ghz, μπορείς να ορίσεις όσα virtual wireless interfaces θες κάτω απ'αυτά.

geioannou
23-05-20, 20:47
Πέρα από τα 2 ξεχωριστά wireless interfaces που έχει για 5ghz και 2.4ghz, μπορείς να ορίσεις όσα virtual wireless interfaces θες κάτω απ'αυτά.

μαλιστα, καταλαβα. πολυ ωραια.
το εχεις, απο εμβελεια ειναι οκ?
εχω ακουσει καλα λογια απο τα reviews

Nikiforos
24-05-20, 16:49
μαλιστα, καταλαβα. πολυ ωραια.
το εχεις, απο εμβελεια ειναι οκ?
εχω ακουσει καλα λογια απο τα reviews

Καλησπερα, εγω το εχω παντως και σκιζει, απο τα καλυτερα πραγματα που εχω αγορασει ποτέ....
Και μαλιστα πλεον το εχω να ρουταρει την INALAN γιατι το 109 με μονοπυρηνη cpu δεν αντεχε τα 200+ mbps up/down, ενω αυτο εχει 4πυρηνη ARM στα 716 κιολας.
Επισης υποστηριζει DUDE server που νομιζω θα σε ενδιαφερει εσενα.
Τελος το μοναδικο μειονεκτημα η μικρη εσωτερικη μνημη δεν χωραει δλδ πολλα πακετα, οποτε πρεπει να κανεις επιλογες.

Υ.Γ το ξερεις οτι ειμαστε σε λαθος θεμα?

geioannou
24-05-20, 20:51
- Ευχαριστω για τις απαντησεις. εκανα παραγγελια!!
- Ε δεν ειμαι και τελειως εκτος! κατι για το μενου του ROS ρωτησα σε ενα συγκεκριμενο μηχανακι !!!
)))

Nikiforos
24-05-20, 21:17
- Ευχαριστω για τις απαντησεις. εκανα παραγγελια!!
- Ε δεν ειμαι και τελειως εκτος! κατι για το μενου του ROS ρωτησα σε ενα συγκεκριμενο μηχανακι !!!
)))

η πρωτη ερωτηση μπορεις να πεις οκ, μετα ξεφυγαμε.
Απλα το λέω για να μην μπερδευουμε τα θεματα.
Αυτο με τα πολλαπλα SSID γινεται κανοντας πολλα Virtual AP, οπως θα ξερεις ομως πρεπει να εχουν ολα αναγκαστικα την ιδια συχνοτητα, αλλα και ισχυ.

deniSun
02-06-20, 16:50
RouterOS version 6.47 has been released in public "stable" channel!
What's new in 6.47 (2020-Jun-02 07:38):

Important note!!!

- The Dude server must be updated to monitor v6.46.4 and v6.47beta30+ RouterOS type devices.
- The Dude client must be manually upgraded after upgrading The Dude server.
- The Dude requires "winbox" policy instead of "dude" to monitor v6.46.4 and v6.47beta30+ RouterOS type devices.
- Make sure LTE APN Profile name does not match any of the DHCP server's names if LTE passthrough is used.

MAJOR CHANGES IN v6.47:
----------------------
!) dns - added client side support for DNS over HTTPS (DoH) (RFC8484);
!) socks - added support for SOCKS5 (RFC 1928);
!) user - enable "winbox" policy for groups with "dude" policy automatically on upgrade;
----------------------

Changes in this release:



*) api - added ECDHE cipher support for "api-ssl" service;
*) bonding - improved slave interface MAC address handling;
*) bonding - prefer primary slave MAC address for bonding interface;
*) branding - do not ask to confirm configuration applied from branding package;
*) branding - fixed identity setting from branding package;
*) branding - improved branding package installation process when another branding package is already installed;
*) bridge - added logging debug message when a host MAC address is learned on a different bridge port;
*) bridge - added warning message when a bridge port gets dynamically added to VLAN range;
*) bridge - correctly remove disabled MSTI;
*) bridge - improved hardware offloading enabling/disabling;
*) certificate - added "skid" and "akid" values for detailed print;
*) certificate - allow dynamic CRL removal;
*) certificate - disabled CRL usage by default;
*) certificate - do not use SSL for first CRL update;
*) chr - added support for file system quiescing;
*) chr - added support for hardware watchdog on ESXI;
*) chr - enabled support for VMBus protocol version 4.1;
*) chr - improved system stability when running CHR on Hyper-V;
*) crs3xx - correctly remove switch rules on CRS317-1G-16S+ and CRS309-1G-8S+ devices;
*) crs3xx - fixed "ingress-rate" property on CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices;
*) crs3xx - fixed hardware offloaded bonding on Ethernet interfaces for CRS354 devices;
*) crs3xx - improved 10G interface initialization on CRS312 devices;
*) crs3xx - improved switch host table updating;
*) crs3xx - show correct switch model for netPower 15FR device;
*) defconf - fixed default configuration initialization if power loss occurred during the process;
*) dhcpv4 - added end option (255) validation for both server and client;
*) dhcpv4-client - improved stability when changing client while still receiving advertisements;
*) dhcpv4-server - disallow zero lease-time setting;
*) dhcpv6-client - improved error logging when when renewed address differs;
*) dhcpv6-server - do not require "server" parameter for bindings;
*) dhcpv6-server - fixed MAC address retrieving from DUID when timestamp is present;
*) discovery - do not send discovery packets on inactive bonding slave interfaces;
*) discovery - do not send discovery packets on interfaces that are blocked by STP;
*) disk - improved disk management service stability when receiving bogus packets;
*) disk - improved recently created file survival after reboots;
*) dns - added support for exclusive dynamic DNS server usage from IPsec;
*) dns - added support for forwarding DNS queries of static entries to specific server;
*) dns - added support for multiple type static entries;
*) dot1x - added "radius-mac-format" parameter;
*) dot1x - added hex value support for RADIUS switch rules;
*) dot1x - added range "dst-port" support for RADIUS switch rules;
*) dot1x - added support for lower case "mac-auth" RADIUS formats;
*) dot1x - fixed "reject-vlan-id" value range;
*) dot1x - fixed dynamically created switch rule removal when client disconnects;
*) dot1x - fixed port blocking when interface changes state from disabled to enabled;
*) dot1x - improved Dot1X service stability when receiving bogus packets;
*) dot1x - improved debug logging output to "dot1x" topic;
*) dot1x - improved value validation for dynamically created switch rules;
*) email - added support for multiple "to" recipients;
*) ethernet - fixed interface stopping responding after blink command execution on CCR2004-1G-12S+2XS;
*) fetch - fixed "User-Agent" usage if provided by "http-header-field";
*) graphing - improved graphing service stability when receiving bogus packets;
*) health - added "gauges" submenu with SNMP OID reporting;
*) health - improved stability for system health monitor on CCR2004-1G-12S+2XS;
*) hotspot - updated splash page design ('/ip hotspot reset-html' required);
*) ike1 - added error message when specifying "my-id" for XAuth identity;
*) ike1 - added support for "UNITY_DEF_DOMAIN" and "UNITY_SPLITDNS_NAME" payload attributes;
*) ike1 - do not try to keep phase 2 when purging phase 1;
*) ike1 - improved policy lookup with specific protocol;
*) ike1 - improved stability when performing policy lookup on non-existant peer;
*) ike2 - added support for "INTERNAL_DNS_DOMAIN" payload attribute;
*) ike2 - added support for RADIUS Disconnect-Request message handling;
*) ike2 - added support for RFC8598;
*) ike2 - allow initiator address change before authentication;
*) ike2 - fixed authentication handling when initiator disconnects before RADIUS response;
*) interface - improved system stability when receiving bogus packets;
*) interface - increased loopback interface MTU to 65536;
*) ipsec - added "split-dns" parameter support for mode configuration;
*) ipsec - added "use-responder-dns" parameter support;
*) ipsec - allow specifying two peers for a single policy for failover;
*) ipsec - control CRL validation with global "use-crl" setting;
*) ipsec - do full certificate validation for identities with explicit certificate;
*) ipsec - fixed minor spelling mistake in logs;
*) ipsec - improved IPsec service stability when receiving bogus packets;
*) ipsec - place dynamically created IPsec policies by L2TP client at the begining of the table;
*) kidcontrol - ignore IPv6 multicast MAC addresses;
*) l2tp - added "src-address" parameter for L2TP client;
*) l2tp - added "use-peer-dns" parameter for L2TP client;
*) l2tp - improved dynamically created IPsec configuration updating;
*) l2tp - use L2TP interface when adding dynamic IPsec peer;
*) lcd - fixed LCD service becoming unavailable on devices without LCD screen;
*) lcd - improved general system stability when LCD is not present;
*) led - fixed minor typo in LED warning message;
*) log - added logging entry when changing user's password;
*) log - added tunnel endpoint address to establishment and disconnect logging entries;
*) log - made startup script failures log as critical errors;
*) lte - added support for Huawei K5161 modem;
*) lte - added support for NEOWAY N720;
*) lte - added support for multiple passthrough APN configuration;
*) lte - do not allow running "scan" on R11e-4G;
*) lte - fixed "allow-roaming" setting when using LTE network mode on R11e-LTE;
*) lte - fixed "band" parameter persistence after disable/enable;
*) lte - fixed "ecno" and "rscp" value reporting on R11e-LTE6;
*) lte - fixed VLAN interface passthrough support;
*) lte - fixed multiple APN reactivation after deactivation by operator;
*) lte - improved stability during firmware upgrade;
*) lte - made "mac-address" parameter read-only;
*) lte - show "phy-cellid" value only in LTE mode;
*) netinstall - removed "Flashfig" from Netinstall;
*) netinstall - removed "Make Floppy" from Netinstall;
*) netinstall - signed netinstall.exe with Digital Signature;
*) netwatch - improved Netwatch service stability when invalid configuration values are passed;
*) ovpn - added "use-peer-dns" parameter for OVPN client;
*) port - removed serial console port on hEX S;
*) ppp - added "Acct-Session-Id" attribute to "Access-Request" messages;
*) ppp - added support for ZTE MF90;
*) ppp - fixed minor typo when running "info" command;
*) ppp - removed "comment", "set" and "edit" commands from "PPP->Active" menu;
*) pptp - added "use-peer-dns" parameter for PPTP client;
*) profile - added support for CCR2004-1G-12S+2XS;
*) proxy - increased minimal free RAM that can not be used for proxy services;
*) qsfp - added support for FEC mode (fec74), with the FEC mode disabled by default;
*) quickset - do not show "SINR" field in Quick Set when there is no data;
*) quickset - fixed invalid configuration applying when performing changes during LTE modem initialization process;
*) quickset - removed "EARFCN" field from Quick Set;
*) quickset - removed "LTE band" setting from Quick Set;
*) quickset - show "Antenna Gain" setting on devices without built-in antennas;
*) quickset - use "station-wds" mode when connecting to AP with RouterOS flag;
*) route - improved system stability after reboot with large amount of VLAN interfaces with PPPoE servers attached;
*) routerboard - added "hold-time" parameter to mode-button menu;
*) routerboard - added "reset-button" menu - custom command execution with reset button;
*) routing - improved IGMP-Proxy service stability when receiving bogus packets;
*) routing - improved routing service stability when receiving bogus packets;
*) sfp28 - added support for FEC modes (fec74 and fec91), with fec91 mode already enabled by default;
*) sniffer - allow setting port for "streaming-server";
*) snmp - added "dot1qTpFdbTable" OID reporting for Q-BRIDGE-MIB;
*) snmp - changed "upsEstimatedMinutesRemaining" reported value from seconds to minutes;
*) snmp - fixed "dot1dBasePort" index offset for BRIDGE-MIB;
*) snmp - improved OID policy checking and error reporting on "set" command;
*) snmp - improved stability when polling MAC address related OID;
*) ssh - improved SSH service stability when receiving bogus packets;
*) supout - added "dot1x" section to supout files;
*) supout - improved UPS information reporting;
*) switch - correctly display switch statistics when all switch ports are disabled on RTL8367 switch chip;
*) switch - correctly enable and disable CPU Flow Control on RB3011UiAS;
*) switch - made "auto" the default value for "vlan-id" parameter when creating a new static host entry;
*) system - correctly handle Generic Receive Offloading (GRO) for MPLS traffic;
*) system - improved driver loading speed on startup;
*) tr069-client - added LTE firmware update functionality support;
*) tr069-client - added additional LTE information parameters;
*) tr069-client - added additional wireless registration table parameters;
*) tr069-client - added interface type parameter support;
*) tr069-client - added multiple simultaneous session support for diagnostics test;
*) tr069-client - added total connection tracking entries parameter;
*) tr069-client - removed warning log message when not using HTTPS;
*) traffic-flow - added "postDestinationMacAddress" parameter support for IPFIX and NetFlow v9;
*) upgrade - fixed space handling in package file names;
*) ups - added battery info for APC SmartUPS 2200;
*) ups - improved compatibility with APC Smart UPS 1000 and 1500;
*) user - improved user management service stability when receiving bogus packets;
*) w60g - fixed link status logging;
*) w60g - improved rate selection in low traffic conditions;
*) w60g - use "arp" and "mtu" parameters from master interface when creating a new station;
*) webfig - fixed 5 GHz wireless interface "frequency" parameter value list on Audience;
*) webfig - fixed WinBox download link;
*) webfig - fixed skin usage from branding package;
*) webfig - updated icon design;
*) winbox - added "Rate" parameter for switch ACL rules;
*) winbox - added "auth-info" parameter under "Dot1X->Active" menu;
*) winbox - added "auth-types", "comment", "mac-auth-mode" and "reject-vlan-id" parameters for Dot1X server;
*) winbox - added "auto-erase" option to "Tool/SMS" menu;
*) winbox - added "bus" parameter for "USB Power Reset" command on NetMetal ac^2;
*) winbox - added "bus" parameter for "USB Power Reset" command on RBM33G;
*) winbox - added "comment" parameter and "dynamic" flag support under "Switch->Rule" table;
*) winbox - added "comment" parameter for Dot1X client;
*) winbox - added "region" parameter for W60G interfaces;
*) winbox - added "skip-dfs-channels" parameter to wireless interface menu;
*) winbox - added comment support for "Switch->VLAN" menu;
*) winbox - added enable and disable buttons for "MPLS->MPLS Interface" table;
*) winbox - added support for inline bar graphs for LTE signal values;
*) winbox - aligned all "IP->Traffic Flow->IPFIX" check boxes in single line (WinBox v3.22 required);
*) winbox - allow setting "Primary" parameter for "balance-tlb" bonding interfaces;
*) winbox - allow to specify any Ethernet like interface under "Tool/WoL" menu;
*) winbox - do not allow to enter empty strings in "caps-man-names" and "common-name" parameters;
*) winbox - fixed "BGP Origin" value display under "IPv6->Routes" menu;
*) winbox - fixed "Data Rate" checkbox alignment (WinBox v3.22 required);
*) winbox - fixed "Tx/Rx Signal Strength" value presence for 4 chain interfaces;
*) winbox - fixed WDS usage when connecting to RouterOS access point using QuickSet;
*) winbox - fixed bonding type interface support for "Switch->Host" table;
*) winbox - fixed dates and times in interface link up/down properties (WinBox v3.24 required);
*) winbox - fixed wireless interface "HT" tab setting presence when "band=5ghz-n/ac";
*) winbox - fixed wireless sniffer parameter setting;
*) winbox - limit number of simultaneous WinBox sessions to 5 for users without "write" permission;
*) winbox - made "yes" the default value for "Inject Summary LSAs" parameter when creating a new NSSA or STUB area;
*) winbox - removed duplicate "join-eui", "dev-eui", "counter", "chain", "size" and "payload" parameters under "LoRa/Traffic";
*) winbox - renamed "Routerboard" to "RouterBOARD" under "System/RouterBOARD" menu;
*) winbox - show "Hardware Offload" parameter for bonding interfaces;
*) winbox - updated icon design;
*) wireless - added "russia 6ghz" regulatory domain information;
*) wireless - enabled unicast flood for DHCP traffic on ARM architecture access points;
*) wireless - fixed Nstreme wireless protocol performance decrease;
*) wireless - improved management service stability when receiving bogus packets;
*) wireless - updated "egypt" regulatory domain information;
*) wireless - updated "russia4" regulatory domain information;
*) www - added "tls-version" parameter in "IP->Services" menu;

Nikiforos
02-06-20, 19:09
καλησπερα, γνωριζει κανεις γιατι στην 6.47 stable ΔΕΝ υπαρχει netinstall???

https://mikrotik.com/download

zark
03-06-20, 21:18
Άργησε αλλά μπήκε

Nikiforos
04-06-20, 06:35
Άργησε αλλά μπήκε

καλημέρα ναι το ξερω, καιρος ηταν….

BillyVan
04-06-20, 12:29
Καλύτερα οσοι εχουν ac2 και 4011 να μην το κανουν ακόμη.

Διαβαζω για πολλά θέματα μετα την αναβάθμιση στην 6.47

minas
04-06-20, 20:40
Καλύτερα οσοι εχουν ac2 και 4011 να μην το κανουν ακόμη.

Διαβαζω για πολλά θέματα μετα την αναβάθμιση στην 6.47

Ευτυχώς μέχρι τώρα σε CRS109 και CRS326 πάει καλά.

@ ADSLgr.com All rights reserved.