PDA

Επιστροφή στο Forum : Περί ROS ο λόγος...



Σελίδες : 1 2 3 4 5 6 7 8 9 10 [11] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Nikiforos
04-06-20, 21:10
Εγω το εκανα σε ολα και σε 109 και hap ac2 και δεν βλεπω κανενα προβλημα απολυτως.
Τι προβληματα δλδ εχεις διαβασει BillyVan? για δωσε link αν υπαρχει προχειρο να ριξουμε μια ματια.
Προφανως εχει σημασια τι πακετα και τι χρηση κανει ο καθενας, καθως και το setup του, οποτε μπορει να μην υπαρχει σε ολους η ιδια συμπεριφορα.

x_undefined
04-06-20, 21:26
Αναφέρουν πολλοί χρήστες υπερβολικά μεγάλο write activity σε σχέση με παλιότερες εκδόσεις, κάτι το οποίο μειώνει εν γένει τη διάρκεια ζωής της Flash μνήμης των MikroTik.

https://forum.mikrotik.com/viewtopic.php?f=21&t=161887

minas
04-06-20, 21:42
Αναφέρουν πολλοί χρήστες υπερβολικά μεγάλο write activity σε σχέση με παλιότερες εκδόσεις, κάτι το οποίο μειώνει εν γένει τη διάρκεια ζωής της Flash μνήμης των MikroTik.

https://forum.mikrotik.com/viewtopic.php?f=21&t=161887

Εγώ βλέπω ~3500 / 2 μέρες. Είναι λίγο αυξημένα, αλλά όχι ανησυχητικά.

Nikiforos
04-06-20, 22:50
Αναφέρουν πολλοί χρήστες υπερβολικά μεγάλο write activity σε σχέση με παλιότερες εκδόσεις, κάτι το οποίο μειώνει εν γένει τη διάρκεια ζωής της Flash μνήμης των MikroTik.

https://forum.mikrotik.com/viewtopic.php?f=21&t=161887

Τοσο συχνα που αλλαζουν οι εκδοσεις δεν θα μεινει αρκετα για να δημιουργηθει καποιο προβλημα παντως.

BillyVan
05-06-20, 10:01
Οπως ειπε ο φίλος για τις εγγραφες αλλά και η εξαφάνιση του antenna gain στο wifi (μπαίνει λενε αυτόματα το μινιμουμ)

Επιπλέον λένε για πολλα critical και system errors.

Βαρέθηκα να φτιάχνουν 5 και να χαλάνε 10...

Παραμένω στην 6.46.6 και θα δω τι θα κανω στο μελλον.

RpMz
05-06-20, 10:08
Yστερα απο το update στο 4011, δεν έχω παρατηρήσει κάτι.

macro
05-06-20, 10:13
Και εγω το ιδιο.................περιμενω. Ακομη υπαρχει αλλο ενα θεμα με αυτο το μηνυμα στα logs.

jkarabas
05-06-20, 10:30
Εγώ που έκανα την αναβάθμιση σε CRS109 και ac2 δεν έχω κάποιο θέμα. Αλλά αν υπάρχει σοβαρό πρόβλημα σίγουρα θα το αντιμετωπίσουν άμεσα.

BillyVan
05-06-20, 12:35
Εγώ που έκανα την αναβάθμιση σε CRS109 και ac2 δεν έχω κάποιο θέμα. Αλλά αν υπάρχει σοβαρό πρόβλημα σίγουρα θα το αντιμετωπίσουν άμεσα.

Δηλαδή στο ac2 αν πας στο wifi σου εχει το antenna gain ?

Επειδή πολλοί λένε οτι εξαφανίστηκε σαν επιλογή.

Nikiforos
05-06-20, 18:26
Δεν βλεπω να υπαρχει αλλα μηπως το χρησιμοποιουσαμε κιολας? τουλαχιστον οι περισσοτεροι.
Οπως ειπα και χτες βγαζουν συχνα εκδοσεις οποτε οτι ειναι θα τα φτιαξουν.
Την εβαλα σε 7 μηχανηματα μου και δεν εχω δει προβληματα, και αυτο με το wifi που λειπει δεν εγινε και κατι.

δλδ που να ειχαμε και RC παρτυ θα γινοταν! :lol::lol::lol:

macro
05-06-20, 21:13
Εγω το χρησιμοποιω χαλαρα σε ολα τα μηχανακια.

BillyVan
05-06-20, 21:19
κι εγω...αφου το έχει....

θα περιμενω λιγο να ωριμασει καμια 5 χρονια η 7 βερσιον για να παω εκει :p

jkarabas
06-06-20, 09:06
Δηλαδή στο ac2 αν πας στο wifi σου εχει το antenna gain ?

Επειδή πολλοί λένε οτι εξαφανίστηκε σαν επιλογή.

Όχι δεν υπάρχει.

deniSun
07-07-20, 18:59
6.48beta12 changelog:

*) arm - added support for automatic CPU frequency stepping for IPQ4018/IPQ4019 devices;
*) arm - improved watchdog and kernel panic reporting in log after reboots on IPQ4018/IPQ4019 devices;
*) bonding - added LACP monitoring (CLI only);
*) bridge - added warning message when port is disabled by the BPDU guard;
*) bridge - correctly remove dynamic VLAN assignment for bridge ports;
*) bridge - fixed dynamic VLAN assignment when changing port "frame-type" property (introduced in v6.46);
*) bridge - fixed dynamic VLAN assignment when changing port to tagged VLAN member;
*) bridge - fixed local MAC address removal from host table when deleting bridge interface;
*) bridge - improved BPDU guard logging;
*) chr - improved interface loading on startup on XEN;
*) chr - improved system stability when changing flow control settings on e1000;
*) crs3xx - added initial Bridge Port Extender support (CLI only);
*) crs3xx - added initial Controlling Bridge support for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices (CLI only);
*) crs3xx - fixed duplicate host entries when creating static switch hosts;
*) crs3xx - fixed HW offloading for netPower 15FR and netPower 16P devices (introduced in v6.47);
*) crs3xx - fixed increased CPU temperature for CRS354-48G-4S+2Q+ device (introduced in v6.47);
*) crs3xx - improved Ethernet port group traffic forwarding for CRS354 devices;
*) defconf - fixed default configuration loading on RBmAPL-2nD;
*) defconf - improved default configuration generation on devices with changed wireless interface names;
*) dhcpv6-server - added ability to generate binding on first request;
*) dhcpv6-server - disallow changing binding's "prefix-pool";
*) dhcpv6-server - improved stability when changing server for static bindings;
*) dns - do not allow setting "forward-to" same as "name" or "regex";
*) dns - do not allow setting zero value IP addresses for "A" and "AAAA" records;
*) dns - do not use DoH for local queries when a server is specified;
*) dns - do not use type "A" for static entries with unspecified type;
*) dns - fixed listening for DNS queries when only dynamic static entries exist (introduced in v6.47);
*) export - fixed HotSpot "address-per-mac" parameter export;
*) export - fixed RouterBOARD USB "type" parameter export;
*) fetch - show status "uploaded" instead of "downloaded" when uploading a file;
*) filesystem - fixed increased "sector writes" reporting (introduced in v6.47);
*) filesystem - improved long-term filesystem stability and data integrity;
*) ftp - fixed possible buffer overflow;
*) ike1 - allow using "my-id" parameter with XAuth;
*) ike1 - fixed policy update with and without mode configuration;
*) ike1 - rekey phase 1 as responder for Windows initiators;
*) ike2 - added "prf-algorithm" support for phase 1;
*) ike2 - fixed initiator child SA init without policy;
*) ike2 - fixed policy reference for pending acquire;
*) ike2 - improved child SA rekeying process;
*) ike2 - retry RSA signature validation with deduced digest from certificate;
*) ipsec - added SHA384 hash algorithm support for phase 1 (CLI only);
*) ipsec - do not update peer endpoints for generated policy entries (introduced in v6.47);
*) ipsec - fixed multiple warning message display for peers;
*) ipsec - inactivate peer's policy on disconnect;
*) kidcontrol - allow creating static device entries without assigned user;
*) lora - added "spoof-gps" parameter for fake GPS coordinate sending;
*) lora - fixed JSON statistics inaccuracies;
*) lte - added "age" column and "max-age" parameter to "cell-monitor" (CLI only);
*) lte - added "comment" parameter for APN profiles (CLI only);
*) lte - added support for MTS 8810FT;
*) lte - fixed modem initialization when multiple modems are used simultaneously;
*) lte - fixed PDP authentication configuration for SIM7600;
*) metarouter - fixed image importing (introduced in v6.46);
*) ospf - improved route tag processing for OSPFv3;
*) ppp - added "ipv6-routes" parameter to "secrets" menu;
*) ppp - added support for "Framed-IPv6-Route" RADIUS attribute;
*) ppp - allow specifying pool name for "remote-ipv6-prefix-pool" parameter;
*) profile - fixed "unclassified" load reporting on PowerPC devices (introduced in v6.47);
*) qsfp - fixed auto-negotiation status;
*) qsfp - fixed break-out cable linking after reboot (introduced in v6.47);
*) qsfp - ignore FEC mode when set to fec91, only fec74 mode is supported (introduced in v6.47);
*) route - improved stability when 6to4 interface is configured with disabled IPv6 package;
*) routerboard - fixed "mode-button" support on SMIPS devices (introduced in v6.47);
*) routerboard - fixed "reset-button" menu presence on all devices;
*) smb - fixed possible memory leak;
*) smb - fixed SMB server (introduced in v6.47);
*) smb - limit active session count to 5 per connection;
*) ssh - fixed returned output saving to file when "output-to-file" parameter is used;
*) supout - added "LoRa" section to supout file;
*) switch - fixed MAC address learning on switch-cpu port for Atheros8316, Atheros8227 and Atheros7240 switch chips;
*) system - replace "3" in superscript to "^3" on RBD53GR devices;
*) tr069-client - added LTE model and revision parameters;
*) tr069-client - added "X_MIKROTIK_MimoRSRP" parameter for LTE RSRP value reporting;
*) tr069-client - allow passing LTE firmware update URL as XML;
*) w60g - added "mdmg-fix" parameter for RBwAP60Gx3 (CLI only);
*) winbox - allow performing "USB Power Reset" on "0" bus on RBM33G;
*) winbox - fixed flag displaying under "IP/DNS/Static" table;
*) winbox - fixed "IP->Kid Control->Devices" table automatic refreshing;
*) winbox - fixed minor typo in "BGP/Peer" menu;
*) winbox - fixed minor typo in "Users" menu;
*) winbox - fixed "receive-errors" setting persistence under "Wireless/Wireless Sniffer/Settings" menu;
*) winbox - fixed "tls-version" parameter setting under "IP/Services" menu;
*) winbox - hide irrelevant switch port parameters;
*) winbox - use health values reported by gauges for "System/Health" menu;
*) wireless - changed "station-roaming" default setting from "enabled" to "disabled";
*) wireless - create "connect-list" rule when address specified for "setup-repeater";
*) wireless - updated "bangladesh" regulatory domain information;
*) wireless - updated "egypt" regulatory domain information;

deniSun
10-07-20, 14:46
What's new in 6.47.1 (2020-Jul-08 12:34):


*) crs3xx - fixed HW offloading for netPower 15FR and netPower 16P devices (introduced in v6.47);
*) crs3xx - fixed increased CPU temperature for CRS354-48G-4S+2Q+ device (introduced in v6.47);
*) crs3xx - improved Ethernet port group traffic forwarding for CRS354 devices;
*) defconf - fixed default configuration generation on devices without "wireless" package installed;
*) defconf - fixed default configuration loading on RBmAPL-2nD;
*) defconf - improved default configuration generation on devices with changed wireless interface names;
*) dhcpv6-server - disallow changing binding's "prefix-pool";
*) dhcpv6-server - improved stability when changing server for static bindings;
*) dns - do not allow setting "forward-to" same as "name" or "regex";
*) dns - do not allow setting zero value IP addresses for "A" and "AAAA" records;
*) dns - do not use DoH for local queries when a server is specified;
*) export - fixed HotSpot "address-per-mac" parameter export;
*) filesystem - fixed increased "sector writes" reporting (introduced in v6.47);
*) ftp - fixed possible buffer overflow;
*) ike2 - fixed initiator child SA init without policy;
*) ike2 - fixed policy reference for pending acquire;
*) ike2 - retry RSA signature validation with deduced digest from certificate;
*) ipsec - do not update peer endpoints for generated policy entries (introduced in v6.47);
*) lora - added "spoof-gps" parameter for fake GPS coordinate sending;
*) lora - fixed JSON statistics inaccuracies;
*) lte - added support for MTS 8810FT;
*) lte - fixed modem initialization when multiple modems are used simultaneously;
*) lte - fixed PDP authentication configuration for SIM7600;
*) metarouter - fixed image importing (introduced in v6.46);
*) ospf - improved route tag processing for OSPFv3;
*) ppp - allow specifying pool name for "remote-ipv6-prefix-pool" parameter;
*) profile - fixed "unclassified" load reporting on PowerPC devices (introduced in v6.47);
*) qsfp - fixed auto-negotiation status;
*) qsfp - ignore FEC mode when set to fec91, only fec74 mode is supported (introduced in v6.47);
*) routerboard - fixed "mode-button" support on SMIPS devices (introduced in v6.47);
*) routerboard - fixed "reset-button" menu presence on all devices;
*) supout - added "LoRa" section to supout file;
*) switch - fixed MAC address learning on switch-cpu port for Atheros8316, Atheros8227 and Atheros7240 switch chips;
*) w60g - added "mdmg-fix" parameter for RBwAP60Gx3 (CLI only);
*) winbox - fixed flag displaying under "IP/DNS/Static" table;
*) winbox - fixed minor typo in "BGP/Peer" menu;
*) winbox - hide irrelevant switch port parameters;
*) wireless - changed "station-roaming" default setting from "enabled" to "disabled";
*) wireless - updated "bangladesh" regulatory domain information;
*) wireless - updated "egypt" regulatory domain information;

Nikiforos
23-08-20, 20:13
What's new in 6.47.2 (2020-Aug-13 06:39):



*) arm - improved stability when forcing 25G speed on unsupported interface;
*) crs3xx - fixed QSFP+ interface LEDs when using break-out cable for CRS326-24S+2Q+;
*) crs3xx - fixed QSFP+ interface linking after reboot for CRS326-24S+2Q+ (introduced in v6.47);
*) discovery - use "static" interface list by default instead of "!dynamic";
*) fetch - show status "uploaded" instead of "downloaded" when uploading a file;
*) hotspot - do not verify Hotspot interface status when detecting if HTTP/HTTPS login method is allowed;
*) interface - added new builtin "static" interface list;
*) l2tp - fixed multiple tunnel establishment from the same remote IP address (introduced in v6.47);
*) lora - fixed "spoof-gps" parameter padding (introduced in v6.47.1);
*) lte - fixed dynamic DHCP client creation when editing APN profile;
*) ospf - fixed case when changing one distribution metric changed metrics for other distribution options;
*) ppp - fixed PPP interface editing for the first time after reboot or after 20 seconds;
*) qsfp - fixed break-out cable linking after reboot (introduced in v6.47);
*) routerboot - fixed memory test on CCR2004-1G-12S+2XS ("/system routerboard upgrade" required);
*) sfp - stabilized CRS212 SFP port functionality and improved monitoring of optical modules;
*) sftp - fixed "flash" directory access (introduced in v6.46);
*) smb - fixed file path validation (introduced in v6.46);
*) smb - fixed possible memory leak;
*) smb - fixed SMB server (introduced in v6.47);
*) smb - limit active session count to 5 per connection;
*) snmp - fixed "current" value reporting on CCR series devices;
*) snmp - fixed "fan-speed" value reporting on CCR series devices;
*) wireless - added support for U-NII-2 for cAP ac;
*) wireless - updated "indonesia5" regulatory domain information;
*) www - improved WWW service stability when receiving bogus packets;

deniSun
29-08-20, 11:24
WinBox v3.25 released!

What's new in v3.25:

*) added "Find Next - F3" tooltip for Find field;
*) added support for CTRL+ and CTRL- keyboard shortcuts for Zoom in and Zoom out;
*) added support for DNS names in address type fields;
*) do not scroll to first log entry when minimizing WinBox if Log window was open;
*) fixed crash when an active Terminal window was opened when WinBox was minimized;
*) fixed crash when opening session with Health window open;
*) fixed multiple "peer" parameter presence when editing an IPsec policy;
*) fixed secure connection establishment after trying to connect to legacy mode devices;
*) fixed session file size increase with each WinBox usage;
*) improved window resizing and scaling behavior on systems that include high DPI monitors;
*) show disabled item icons in gray;

deniSun
02-09-20, 18:47
6.48beta35 changelog:

*) bonding - removed "sys-id" and "sys-priority" from monitor-slaves command;
*) bridge - fixed BPDU guard port disable/enable on HW offloaded interfaces;
*) bridge - fixed host table update on SNMP query;
*) bridge - fixed multicast table printing;
*) bridge - fixed packet forwarding for CAP and BCP controlled interfaces (introduced in v6.48beta12);
*) bridge - fixed STP alternate and backup port states for devices with switch chip (introduced in v6.47);
*) bridge - increased multicast table size to 4K entries;
*) crs3xx - fixed "mirror-source" property on switch port disable for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices;
*) crs3xx - fixed port isolation for "switch-cpu" port for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices;
*) crs3xx - fixed port isolation removal for "switch-cpu" port on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - fixed "storm-rate" traffic limiting for switch-cpu port on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - fixed switch ACL rules for CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - fixed switch port "egress-rate" removal for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices;
*) crs3xx - fixed VLAN tagged packet forwarding on "switch-cpu" port for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices (introduced in v6.48beta12);
*) defconf - improved CAP interface bridging;
*) defconf - improved default configuration generation on devices without wireless package installed;
*) discovery - added "lldp-med-net-policy-vlan" property for assigning VLAN ID (CLI only);
*) discovery - allow choosing which discovery protocol is used (CLI only);
*) discovery - fixed discovery on mesh ports;
*) discovery - fixed discovery packet sending on newly bridged port with "protocol-mode=none";
*) discovery - fixed discovery when enabled only on master port;
*) discovery - use interface MAC address when sending MNDP from slave port;
*) dns - added IPv6 support for DoH;
*) dns - fixed multiple TXT string replies;
*) dns - hide default static entry "type" from export;
*) fetch - fixed "src-address" usage for SFTP;
*) filesystem - improved long-term filesystem stability and data integrity;
*) health - removed unused "heater-control" and "heater-threshold" parameters;
*) hotspot - added support for captive portal advertising using DHCP (RFC7710);
*) hotspot - improved management service stability when receiving bogus packets;
*) ike2 - fixed local side NAT detection;
*) ipsec - do not kill connection when peer's "name" or "comment" is changed;
*) ipsec - refresh peer's DNS only when phase 1 is down;
*) lte - added support for Alcatel IK41VE1;
*) snmp - fixed value types for "dot1dStp";
*) tr069-client - send correct "ConnectionRequestURL" when using IPv6;
*) traffic-flow - added "sys-init-time" parameter support;
*) wireless - allow setting "tx-power" up to 40;

Nikiforos
03-09-20, 16:50
6.48beta35 changelog:

Τις εκδοσεις RC που ειναι δλδ οι beta τις γραφουμε εδω :

https://www.adslgr.com/forum/threads/1042376-Mikrotik-ROS-RC-version-%CF%83%CF%85%CE%B6%CE%B7%CF%84%CE%AE%CF%83%CE%B5%CE%B9%CF%82-bugs-%CE%BA%CF%84%CE%BB/page7

- - - Updated - - -

What's new in 6.47.3 (2020-Sep-01 05:24):



*) bridge - fixed host table update on SNMP query;
*) crs3xx - fixed hardware offloaded bonding on Ethernet interfaces for CRS354 devices;
*) crs3xx - fixed hardware offloaded MPLS forwarding when using bonding interfaces;
*) crs3xx - fixed switch ACL rules for CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - improved Ethernet port group traffic forwarding for CRS354 devices;
*) crs3xx - improved system stability when using hardware offloaded MPLS;
*) dns - fixed multiple TXT string replies;
*) dns - hide default static entry "type" from export;
*) dot1x - fixed duplicate EAP request packets for server;
*) dot1x - fixed EAP packet version numbering;
*) ike2 - fixed local side NAT detection;
*) lte - fixed multiple passthrough APN default route installation;
*) lte - fixed RSCP value reporting;
*) lte - validate interface existence on initiation;
*) ospf - fixed disappearing NSSA default route;
*) ospf - fixed processing of "unknown" LSA type;
*) poe - fixed "power-cycle" functionality on RB960GSP;
*) routerboot - fixed etherboot FCS errors with 100Mbps rate for CRS305, CRS309 and CRS317 devices ("/system routerboard upgrade" required);
*) webfig - fixed negative value usage in "spoof-gps" parameter (introduced in v6.47.1);
*) wireless - allow setting "tx-power" up to 40;
*) wireless - fixed potential wireless driver issue related to CVE-2020-3702;


Aαααιντα παλι αναβαθμισεις.....

- - - Updated - - -

Ρε πλακα μας κανει η mikrotik?

What's new in v3.26:

*) fixed CAPsMAN service failure when viewing Radios table;
*) fixed Hotspot service failure when viewing Hosts table;
*) support Ctrl++ & Ctrl+- on keypad for quick access to Zoom In/Zoom Out;

What's new in v3.27:

*) fixed content drawing of read-only tables (introduced in v3.26);

If you experience version related issues, then please report them to support@mikrotik.com.

Both Winbox 32-bit and 64-bit versions are available here:
https://www.mikrotik.com/download

deniSun
14-09-20, 13:45
RouterOS 6.46.7 [Long-term]


hanges since 6.46.6:

*) arm - improved stability when forcing 25G speed on unsupported interface;
*) bridge - fixed host table update on SNMP query;
*) bridge - fixed STP alternate and backup port states for devices with switch chip;
*) crs3xx - fixed hardware offloaded MPLS forwarding when using bonding interfaces;
*) crs3xx - fixed QSFP+ interface LEDs when using break-out cable for CRS326-24S+2Q+;
*) crs3xx - fixed switch ACL rules for CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - fixed switch port "egress-rate" removal for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices;
*) crs3xx - improved 10G interface initialization on CRS312 devices;
*) crs3xx - improved Ethernet port group traffic forwarding on CRS354 devices;
*) crs3xx - improved system stability when using hardware offloaded MPLS;
*) defconf - fixed default configuration loading on RBmAPL-2nD;
*) dhcpv6-server - disallow changing binding's "prefix-pool";
*) dhcpv6-server - do not require "server" parameter for bindings;
*) discovery - do not send discovery packets on inactive bonding slave interfaces;
*) discovery - do not send discovery packets on interfaces that are blocked by STP;
*) dot1x - fixed duplicate EAP request packets for server;
*) dot1x - fixed EAP packet version numbering;
*) email - added support for multiple "to" recipients;
*) export - fixed HotSpot "address-per-mac" parameter export;
*) fetch - show status "uploaded" instead of "downloaded" when uploading a file;
*) ftp - fixed possible buffer overflow;
*) hotspot - ignore packets from host while MAC authentication is in progress;
*) ike1 - improved stability when performing policy lookup on non-existant peer;
*) ike2 - fixed local side NAT detection;
*) ike2 - fixed policy reference for pending acquire;
*) ike2 - retry RSA signature validation with deduced digest from certificate;
*) interface - added new builtin "static" interface list;
*) kidcontrol - fixed "time-unlimited-rate" to engage in correct time;
*) lcd - improved general system stability when LCD is not present;
*) lte - fixed modem initialization when multiple modems are used simultaneously;
*) lte - fixed PDP authentication configuration for SIM7600;
*) lte - improved stability during firmware upgrade;
*) metarouter - fixed image importing (introduced in v6.46);
*) ospf - fixed disappearing NSSA default route;
*) ospf - fixed processing of "unknown" LSA type;
*) ospf - improved route tag processing for OSPFv3;
*) poe - fixed "power-cycle" functionality on hEX PoE, PowerBox Pro and OmniTIK 5 PoE ac;
*) port - removed serial console port on hEX S;
*) ppp - removed "comment", "set" and "edit" commands from "PPP->Active" menu;
*) profile - added support for CCR2004-1G-12S+2XS;
*) qsfp - fixed auto-negotiation status;
*) quickset - fixed invalid configuration applying when performing changes during LTE modem initialization process;
*) quickset - show "Antenna Gain" setting on devices without built-in antennas;
*) route - improved stability when 6to4 interface is configured with disabled IPv6 package;
*) routerboard - fixed "reset-button" menu presence on all devices;
*) routerboot - fixed etherboot FCS errors with 100Mbps rate for CRS305, CRS309 and CRS317 devices ("/system routerboard upgrade" required);
*) sfp - stabilized CRS212 SFP port functionality and improved monitoring of optical modules;
*) smb - fixed file path validation (introduced in v6.46);
*) smb - fixed possible memory leak;
*) smb - limit active session count to 5 per connection;
*) sniffer - allow setting port for "streaming-server";
*) snmp - added "dot1qTpFdbTable" OID reporting for Q-BRIDGE-MIB;
*) switch - correctly enable and disable CPU Flow Control on RB3011UiAS;
*) switch - fixed MAC address learning on switch-cpu port for Atheros8316, Atheros8227 and Atheros7240 switch chips;
*) upgrade - fixed space handling in package file names;
*) w60g - added "mdmg-fix" parameter for RBwAP60Gx3 (CLI only);
*) w60g - improved rate selection in low traffic conditions;
*) webfig - fixed 5 GHz wireless interface "frequency" parameter value list on Audience;
*) winbox - added "region" parameter for W60G interfaces;
*) winbox - allow to specify any Ethernet like interface under "Tool/WoL" menu;
*) winbox - do not allow to enter empty strings in "caps-man-names" and "common-name" parameters;
*) winbox - fixed "Tx/Rx Signal Strength" value presence for 4 chain interfaces;
*) winbox - fixed wireless interface "HT" tab setting presence when "band=5ghz-n/ac";
*) winbox - fixed wireless sniffer parameter setting;
*) winbox - hide irrelevant switch port parameters;
*) wireless - added support for U-NII-2 for cAP ac;
*) wireless - added support for U-NII-2 for wAP ac;
*) wireless - allow setting "tx-power" up to 40;
*) wireless - changed "station-roaming" default setting from "enabled" to "disabled";
*) wireless - fixed potential wireless driver issue related to CVE-2020-3702;
*) wireless - improved management service stability when receiving bogus packets;
*) wireless - updated "bangladesh" regulatory domain information;
*) wireless - updated "canada" regulatory domain information;
*) wireless - updated "egypt" regulatory domain information;
*) wireless - updated "indonesia5" regulatory domain information;
*) wireless - updated "united states" regulatory domain information;
*) www - added "tls-version" parameter in "IP->Services" menu;

deniSun
15-09-20, 17:20
What's new in 6.48beta40 (2020-Sep-14 13:34):


*) arm64 - improved reboot reason reporting in log;
*) bridge - added minor fixes and improvements for IGMP snooping with HW offloading;
*) bridge - fixed link-local multicast forwarding when IGMP snooping and HW offloading is enabled;
*) bridge - fixed MDB entry removal when using bridge port "fast-leave" property;
*) conntrack - automatically reduce connection tracking timeouts when table is full;
*) console - allow "once" parameter for bonding monitoring;
*) crs3xx - added initial Bridge Port Extender support (CLI only);
*) crs3xx - added initial Controlling Bridge support for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices (CLI only);
*) crs3xx - added switch-cpu port VLAN filtering (switch-cpu port is now mapped with bridge interface VLAN membership when vlan-filtering is enabled);
*) crs3xx - fixed IGMP snooping for CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - fixed switch "copy-to-cpu" property for CRS305, CRS318, CRS326-24G-2S+, CRS328 devices;
*) detnet - fixed malformed dummy DHCP User Class option;
*) detnet - use MAC address from bridge interface instead of slave port;
*) dhcpv4-server - improved "client-id" value parsing;
*) ipsec - refresh peer's DNS only when phase 1 is down;
*) leds - fixed LED type setting;
*) smb - fixed possible memory leak;
*) sms - fixed SMS sending when both "interface" and "smsc" parameters are specified;
*) snmp - added information from IPsec "active-peers" menu to MIKROTIK-MIB;
*) snmp - fixed "/tool snmp-get" functionality (introduced in v 6.46beta43);
*) snmp - fixed value types for "dot1qPvid";
*) supout - added bonding interface monitor information;
*) switch - fixed Ethernet padding for small packets;
*) tr069-client - allow passing LTE firmware update URL as XML;
*) user-manager - do not allow creating limitation that crosses midnight;
*) user-manager - updated PayPal's root certificate authorities;
*) wireless - improved WPS process stability;

deniSun
21-09-20, 11:49
6.47.4 changelog [stable]:

*) bridge - fixed STP alternate and backup port states for devices with switch chip (introduced in v6.47);
*) crs3xx - fixed IGMP snooping for CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - fixed switch port "egress-rate" removal for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices;
*) fetch - fixed "src-address" usage for SFTP;
*) filesystem - improved long-term filesystem stability and data integrity;
*) hotspot - ignore packets from host while MAC authentication is in progress;
*) kidcontrol - fixed "time-unlimited-rate" to engage in correct time;
*) smb - fixed possible memory leak (CVE-2020-11881);
*) sms - fixed SMS sending when both "interface" and "smsc" parameters are specified;
*) snmp - fixed "/tool snmp-get" functionality (introduced in v 6.46beta43);
*) user-manager - updated PayPal's root certificate authorities;
*) wireless - added support for U-NII-2 for wAP ac;
*) wireless - updated "canada" regulatory domain information;
*) wireless - updated "united states" regulatory domain information;

deniSun
15-10-20, 17:14
6.48beta48 changelog:
Important note!!!

Using this version on CRS354-48G-4S+2Q+RM or CRS354-48P-4S+2Q+RM will cause booting issues and device may need to be reinstalled.

Changes in this release:


*) bridge - automatically remove extended interfaces when deleting PE device from CB;
*) cap - fixed L2MTU path discovery;
*) cap - fixed L2MTU setting from CAPsMAN;
*) certificate - fixed private key verification for CA certificate during signing process;
*) cloud - improved backup generation process;
*) crs3xx - fixed CDP packet forwarding for CRS305, CRS318, CRS326-24G-2S+, CRS328 devices;
*) crs3xx - fixed port-isolation for CRS305, CRS318, CRS326-24G-2S+, CRS328 devices (introduced in v6.48beta35);
*) defconf - fixed default configuration loading on RBmAP-2nD;
*) dhcpv4-client - fixed DHCP offer packet parsing with overload option present;
*) discovery - fixed occasional wrong Chassis-ID for LLDP packets (introduced in v6.48beta35);
*) dot1x - accept priority tagged (VLAN 0) EAP packets on dot1x client;
*) fetch - improved SSL handshake processing;
*) filesystem - improved long-term filesystem stability and data integrity;
*) ike1 - fixed "my-id=address" parameter usage together with certificate authentication;
*) ike2 - added support for IKEv2 Message Fragmentation (RFC7383);
*) ike2 - fixed EAP MSK length validation;
*) ike2 - fixed too small payload parsing;
*) interface - added temperature warning and interface disable on overheat for SFP and SFP+ interfaces (CLI only);
*) led - fixed state persistence after device reboot on NetMetal 5 ac devices;
*) lora - fixed device going into "ERROR" state caused by FSK modulated downlinks;
*) lte - fixed "band" value reporting;
*) lte - fixed multiple APN passthrough on R11e-4G;
*) lte - improved EARFCN reporting in 3G and LTE modes on Sierra modems;
*) lte - limit allowed APN count to 3 on R11e-LTE;
*) m33g - added support for "/system gpio" menu (CLI only);
*) mpls - fixed duplicate "LabelRelease" message sending;
*) profile - improved idle process detection on x86 processors;
*) profile - improved process classification on ARM devices;
*) quickset - added "Port Mapping" to QuickSet;
*) quickset - fixed local IP address setting on master interface;
*) radius - added "Service-Type" attribute to Access-Request for IPv4 and IPv6 DHCP servers;
*) routerboard - fixed PCIe bus reset during power-on on MMIPS devices ("/system routerboard upgrade" required);
*) routerboard - force power-down on PCIe bus during reboot on LHGR devices ("/system routerboard upgrade" required);
*) script - added error message in the logs if startup script runtime limit was exceeded;
*) snmp - added information from IPsec "active-peers" menu to MIKROTIK-MIB;
*) snmp - added new LTE monitoring OID's to MIKROTIK-MIB;
*) switch - fixed Ethernet padding for small packets;
*) tr069-client - fixed RouterOS downgrade procedure;
*) traffic-flow - added NAT event logging support for IPFIX;
*) traffic-generator - fixed 32Gbps limitation;
*) user - improved WinBox and The Dude authenticated session handling;
*) user-manager - do not allow creating limitation that crosses midnight;
*) user-manager - updated PayPal's root certificate authorities;
*) vrrp - made "password" parameter sensitive;
*) w60g - general stability and performance improvements;
*) wireless - added support for US FCC UNII-2 and Canada country profiles for NetMetal series devices;
*) wireless - do not override MTU and ARP values from CAPsMAN with local forwarding;
*) wireless - fixed incorrect wireless capability information in association response frames;
*) wireless - updated "no_country_set" regulatory domain information;

deniSun
22-10-20, 14:18
What's new in 6.47.6 (2020-Oct-21 10:41):

Changes in this release:


*) cap - fixed L2MTU path discovery;
*) crs3xx - fixed hardware offloaded LACP bonding on Ethernet interfaces for CRS354 devices;
*) crs3xx - fixed switch rules for CRS309 and CRS317 devices (introduced in v6.47.3);
*) defconf - fixed default configuration loading on RBmAP-2nD;
*) dhcpv4-client - fixed DHCP offer packet parsing with overload option present;
*) dhcpv6-server - properly save bindings when executing "make-static" command;
*) fetch - improved SSL handshake processing;
*) ike1 - allow using "my-id" parameter with XAuth;
*) leds - fixed LED type setting;
*) lora - expose "joinEui" un "devEui" values in the log;
*) lte - fixed multiple APN passthrough on R11e-4G;
*) lte - improved EARFCN reporting in 3G and LTE modes on Sierra modems;
*) lte - limit allowed APN count to 3 on R11e-LTE;
*) mpls - fixed duplicate "LabelRelease" message sending;
*) ospf - optimized LSA printing for smaller message sizes;
*) radius - added "Service-Type" attribute to Access-Request for IPv4 and IPv6 DHCP servers;
*) smips - reduced RouterOS main package size;
*) switch - fixed Ethernet padding for small packets;
*) user - improved WinBox and The Dude authenticated session handling;
*) vrrp - made "password" parameter sensitive;
*) w60g - general stability and performance improvements;
*) wireless - added support for US FCC UNII-2 and Canada country profiles for NetMetal series devices;
*) wireless - fixed incorrect wireless capability information in association response frames;

What's new in 6.47.5 (2020-Oct-08 06:48):


(factory only release)

deniSun
29-10-20, 23:21
What's new in 6.47.7 (2020-Oct-27 13:27):


*) crs3xx - improved system stability on CRS354 devices;
*) defconf - improved default configuration generation on devices without wireless package installed;
*) poe - fixed automatic PoE firmware upgrade procedure;
*) poe - improved PoE-out status detection;
*) wireless - updated "kazakhstan" regulatory domain information;

minas
29-10-20, 23:27
What's new in 6.47.7 (2020-Oct-27 13:27):
*) wireless - updated "kazakhstan" regulatory domain information;


Very nice :cool:

zark
30-10-20, 00:16
Very nice :cool:

Επιτέλους!

Nikiforos
30-10-20, 07:43
μου φαινεται οτι βγαζουν αναβαθμισεις για ψυλου πηδημα που λεμε....
καλημερα!

Υ.Γ πρεπει καποια στιγμη να βρω πως γινεται ομαδικο update μεσω Dude server.

deniSun
02-11-20, 18:23
6.46.8 [Long-term]
Changes since 6.46.7:


*) cap - fixed L2MTU path discovery;
*) chr - fixed file system quiescing;
*) crs3xx - fixed IGMP snooping for CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - fixed switch rules for CRS309 and CRS317 devices (introduced in v6.46.7);
*) crs3xx - improved system stability on CRS354 devices;
*) defconf - fixed default configuration loading on RBmAP-2nD;
*) defconf - improved default configuration generation on devices with changed wireless interface names;
*) dhcpv6-server - improved stability when changing server for static bindings;
*) dhcpv6-server - properly save bindings when executing "make-static" command;
*) fetch - fixed "src-address" usage for SFTP;
*) fetch - improved SSL handshake processing;
*) hotspot - do not verify Hotspot interface status when detecting if HTTP/HTTPS login method is allowed;
*) leds - fixed LED type setting;
*) lte - fixed multiple APN passthrough on R11e-4G;
*) lte - limit allowed APN count to 3 on R11e-LTE;
*) mpls - fixed duplicate "LabelRelease" message sending;
*) ospf - optimized LSA printing for smaller message sizes;
*) poe - fixed automatic PoE firmware upgrade procedure;
*) poe - improved PoE-out status detection;
*) ppp - allow specifying pool name for "remote-ipv6-prefix-pool" parameter;
*) radius - added "Service-Type" attribute to Access-Request for IPv4 and IPv6 DHCP servers;
*) smips - reduced RouterOS main package size;
*) sms - fixed SMS sending when both "interface" and "smsc" parameters are specified;
*) snmp - fixed "/tool snmp-get" functionality (introduced in v 6.46beta43);
*) switch - fixed Ethernet padding for small packets;
*) user - improved WinBox and The Dude authenticated session handling;
*) user-manager - updated PayPal's root certificate authorities;
*) vrrp - made "password" parameter sensitive;
*) w60g - general stability and performance improvements;
*) wireless - added support for US FCC UNII-2 and Canada country profiles for NetMetal series devices;
*) wireless - fixed incorrect wireless capability information in association response frames;
*) wireless - updated "kazakhstan" regulatory domain information;

deniSun
24-11-20, 20:12
6.48beta58 changelog:
Changes in this release:


*) arm - improved system stability;
*) bgp - treat route target with AS 65535 as two byte AS;
*) bonding - added LACP monitoring;
*) branding - fixed imported skin presence;
*) bridge - use "frame-types=admit-all" by default for extended bridge ports;
*) certificate - fixed CRL URL length limit;
*) certificate - generate CRL even when CRL URL not specified;
*) certificate - properly flush expired SCEP OTP entries;
*) chr - fixed SSH key import on Azure;
*) crs3xx - fixed booting issues on CRS354 devices (introduced in v6.48beta48);
*) crs3xx - fixed bridge port-extender for CRS318 devices;
*) crs3xx - fixed switch-cpu VLAN membership removal (introduced in v6.48beta40);
*) crs3xx - improved system stability on CRS354 devices;
*) defconf - fixed default configuration loading on RBcAP-2nD and RBwAP-2nD;
*) defconf - fixed static IP address setting in case default configuration loading fails;
*) dhcp - fixed DHCP packet forwarding to IPsec policies;
*) dhcpv6 server - added support for "Delegated-IPv6-Prefix" for PPP services;
*) dhcpv6-server - added support for "option18" and "option37" for RADIUS managed clients;
*) dhcpv6-server - allow loose static binding "pool" parameter (introduced in v6.46.8);
*) dhcpv6-server - make sure that calling station ID always contains DUID;
*) discovery - added "lldp-med-net-policy-vlan" property for assigning VLAN ID;
*) discovery - allow choosing which discovery protocol is used;
*) disk - fixed external EXT3 disk mounting on x86 systems;
*) disk - improved disk management service stability when receiving bogus packets;
*) dns - end ongoing queries when changing DoH configuration;
*) dns - improved stability with large table of static records;
*) dot1x - fixed reauthentication after server rejects a client into VLAN;
*) dot1x - fixed unicast destination EAP packet receiving when a client is running on a bridge port;
*) dude - fixed configuration menu presence on ARM64 devices;
*) filesystem - improved long-term filesystem stability and data integrity;
*) hotspot - fixed "html-directory" parameter export;
*) ike2 - improved EAP message integrity checking;
*) interface - fixed pwr-line running state (introduced in v6.45);
*) lora - limited output power in RU region for range 868.7 MHz - 869.2 MHz according to regulations;
*) lte - increased "at+cops" reply timeout to 1 minute;
*) metarouter - allow creating RouterOS metarouter instances on devices with 16MB flash storage;
*) metarouter - fixed directory entry reporting;
*) metarouter - fixed memory leak when tearing down metarouter instance;
*) ppp - added "bridge-learning" parameter support;
*) ppp - store "last-caller-id" for PPP secrets;
*) ppp - store "last-disconnect-reason" for PPP secrets;
*) profile - fixed process classification on x86 systems (introduced in v6.47);
*) quickset - fixed wireless client "uptime" counter in "Home Mesh" mode;
*) sstp - fixed "idle-timeout" on TILE and CHR devices;
*) supout - improved autosupout.rif file generation process;
*) timezone - updated timezone information from "tzdata2020d" release;
*) tr069-client - added branding package version parameter;
*) upgrade - do not try installing packages if download was not completed;
*) webfig - allow hiding and renaming inline buttons;
*) webfig - allow hiding QuickSet mode selector;
*) webfig - properly stop background processes when switching away from QuickSet tab;
*) winbox - added "operator" parameter under "Interface/LTE" menu;
*) winbox - added "reformat-hold-button-max" parameter under "System/RouterBOARD/Settings" menu;
*) winbox - added "tls-mode" parameter under "CAPsMAN/Security Cfg." menu;
*) winbox - added "tx-rx-1024-max" counter under "Interface/Overall-Stats" for CRS3xx devices;
*) winbox - allow adding bonding interface with one slave interface;
*) winbox - do not allow MAC address changes on LTE interfaces;
*) winbox - do not show "network-mode" parameter for LTE interfaces that do not support it;
*) winbox - fixed "interface" and "on-interface" parameter presence under "Bridge/Hosts" menu;
*) winbox - provide sane default values for bridge "VLAN IDs" parameter;
*) winbox - show "System/Health" only on boards that have health monitoring;
*) winbox - show "System/RouterBOARD/Mode Button" on devices that have such feature;
*) winbox - show "usb-bus" option on all boards that have it;
*) winbox - show "usb-type" option on all boards that have it;
*) winbox - sort IPv6 firewall "chain" parameter entries alphabetically;
*) wireless - added U-NII-2 support for US and Canada country profiles for mANTBox series devices;
*) wireless - increased "group-key-update" maximum value to 1 day;

deniSun
26-11-20, 12:23
RouterOS 6.47.8 [Stable] changelog:

*) arm - improved system stability;
*) bgp - treat route target with AS 65535 as two byte AS;
*) branding - fixed imported skin presence;
*) bridge - fixed BPDU guard port disable/enable on HW offloaded interfaces;
*) disk - improved disk management service stability when receiving bogus packets;
*) dns - improved stability with large table of static records;
*) ike1 - allow using "my-id" parameter with XAuth;
*) leds - fixed LED type setting;
*) metarouter - fixed directory entry reporting;
*) profile - fixed process classification on x86 systems (introduced in v6.47);
*) quickset - fixed wireless client "uptime" counter in "Home Mesh" mode;
*) sstp - fixed "idle-timeout" on TILE and CHR devices;
*) system - replace "3" in superscript to "^3" on RBD53GR devices;
*) upgrade - do not try installing packages if download was not completed;
*) winbox - added "operator" parameter under "Interface/LTE" menu;
*) winbox - added "reformat-hold-button-max" parameter under "System/RouterBOARD/Settings" menu;
*) winbox - added "tls-mode" parameter under "CAPsMAN/Security Cfg." menu;
*) winbox - added "tx-rx-1024-max" counter under "Interface/Overall-Stats" for CRS3xx devices;
*) winbox - do not allow MAC address changes on LTE interfaces;
*) winbox - show "System/Health" only on boards that have health monitoring;
*) winbox - show "System/RouterBOARD/Mode Button" on devices that have such feature;
*) winbox - show "usb-bus" option on all boards that have it;
*) winbox - show "usb-type" option on all boards that have it;
*) winbox - sort IPv6 firewall "chain" parameter entries alphabetically;
*) wireless - added support for U-NII-2 US and Canada country profiles for mANTBox series devices;

deniSun
23-12-20, 14:10
Απλά τεράστιο...
What's new in 6.48 stable (2020-Dec-22 11:20):



*) arm - added support for automatic CPU frequency stepping for IPQ4018/IPQ4019 devices;
*) arm - improved system stability;
*) arm - improved watchdog and kernel panic reporting in log after reboots on IPQ4018/IPQ4019 devices;
*) arm64 - improved reboot reason reporting in log;
*) bgp - fixed VPNV4 RD byte order;
*) bonding - added LACP monitoring;
*) branding - fixed LCD logo loading from new style branding package;
*) bridge - added "multicast-router" monitoring value for bridge interface;
*) bridge - added fixes and improvements for IGMP and MLD snooping;
*) bridge - added minor fixes and improvements for IGMP snooping with HW offloading;
*) bridge - added warning message when port is disabled by the BPDU guard;
*) bridge - allow to exclude interfaces from extended ports;
*) bridge - automatically remove extended interfaces when deleting PE device from CB;
*) bridge - correctly filter packets by L2MTU size;
*) bridge - correctly remove dynamic VLAN assignment for bridge ports;
*) bridge - fixed "multicast-router" setting on bridge enable;
*) bridge - fixed MDB entry removal when using bridge port "fast-leave" property;
*) bridge - fixed dynamic VLAN assignment when changing port "frame-type" property (introduced in v6.46);
*) bridge - fixed dynamic VLAN assignment when changing port to tagged VLAN member;
*) bridge - fixed link-local multicast forwarding when IGMP snooping and HW offloading is enabled;
*) bridge - fixed local MAC address removal from host table when deleting bridge interface;
*) bridge - fixed multicast table printing;
*) bridge - improved BPDU guard logging;
*) bridge - increased multicast table size to 4K entries;
*) bridge - show "H" flag for extended bridge ports;
*) bridge - show error when switch do not support controlling bridge or port extension;
*) bridge - use "frame-types=admit-all" by default for extended bridge ports;
*) cap - fixed L2MTU setting from CAPsMAN;
*) certificate - clear challenge password on renew;
*) certificate - fixed CRL URL length limit;
*) certificate - fixed private key verification for CA certificate during signing process;
*) certificate - generate CRL even when CRL URL not specified;
*) certificate - properly flush expired SCEP OTP entries;
*) chr - fixed SSH key import on Azure;
*) chr - fixed VLAN tagged packet transmit on bridge for Hyper-V installations;
*) chr - improved interface loading on startup on XEN;
*) chr - improved system stability when changing flow control settings on e1000;
*) cloud - improved backup generation process;
*) conntrack - automatically reduce connection tracking timeouts when table is full;
*) console - allow "once" parameter for bonding monitoring;
*) crs3xx - added initial Bridge Port Extender support;
*) crs3xx - added initial Controlling Bridge support for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - added switch-cpu port VLAN filtering (switch-cpu port is now mapped with bridge interface VLAN membership when vlan-filtering is enabled);
*) crs3xx - correctly filter packets by L2MTU size;
*) crs3xx - fixed "custom-drop-packet" and "not-learned" switch stats for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - fixed "mirror-source" property on switch port disable for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices;
*) crs3xx - fixed "storm-rate" traffic limiting for switch-cpu port on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - fixed "switch-cpu" VLAN membership on bridge disable;
*) crs3xx - fixed CDP packet forwarding for CRS305, CRS318, CRS326-24G-2S+, CRS328 devices;
*) crs3xx - fixed duplicate host entries when creating static switch hosts;
*) crs3xx - fixed port isolation for "switch-cpu" port for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices;
*) crs3xx - fixed port isolation removal for "switch-cpu" port on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - fixed switch "copy-to-cpu" property for CRS305, CRS318, CRS326-24G-2S+, CRS328 devices;
*) crs3xx - fixed switch "not-learned" stats for CRS305, CRS326-24G-2S+, CRS328-24P-4S+, CRS328-4C-20S-4S+, CRS318 devices;
*) crs3xx - improved system stability on CRS354 devices;
*) crs3xx - improved system stability when receiving large frames for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices (introduced in v6.47.5);
*) defconf - fixed default configuration loading on RBcAP-2nD and RBwAP-2nD;
*) defconf - fixed static IP address setting in case default configuration loading fails;
*) defconf - improved CAP interface bridging;
*) defconf - improved default configuration generation on devices with non-default wireless interface names;
*) detnet - fixed malformed dummy DHCP User Class option;
*) detnet - use MAC address from bridge interface instead of slave port;
*) dhcp - fixed DHCP packet forwarding to IPsec policies;
*) dhcpv4-server - improved "client-id" value parsing;
*) dhcpv6 server - added support for "Delegated-IPv6-Prefix" for PPP services;
*) dhcpv6-server - added ability to generate binding on first request;
*) dhcpv6-server - added support for "option18" and "option37" for RADIUS managed clients;
*) dhcpv6-server - allow loose static binding "pool" parameter (introduced in v6.46.8);
*) dhcpv6-server - make sure that calling station ID always contains DUID;
*) discovery - added "lldp-med-net-policy-vlan" property for assigning VLAN ID;
*) discovery - allow choosing which discovery protocol is used;
*) discovery - fixed discovery on mesh ports;
*) discovery - fixed discovery packet sending on newly bridged port with "protocol-mode=none";
*) discovery - fixed discovery when enabled only on master port;
*) discovery - send the same "Chassis ID" on all interfaces for LLDP packets;
*) discovery - use interface MAC address when sending MNDP from slave port;
*) disk - fixed external EXT3 disk mounting on x86 systems;
*) dns - added IPv6 support for DoH;
*) dns - do not use type "A" for static entries with unspecified type;
*) dns - end ongoing queries when changing DoH configuration;
*) dns - fixed listening for DNS queries when only dynamic static entries exist (introduced in v6.47);
*) dot1x - accept priority tagged (VLAN 0) EAP packets on dot1x client;
*) dot1x - fixed reauthentication after server rejects a client into VLAN;
*) dot1x - fixed unicast destination EAP packet receiving when a client is running on a bridge port;
*) dude - fixed configuration menu presence on ARM64 devices;
*) export - fixed RouterBOARD USB "type" parameter export;
*) filesystem - fixed repartition on RB4011 series devices;
*) filesystem - fixed repartition on non-first partition;
*) filesystem - improved long-term filesystem stability and data integrity;
*) gps - fixed "init-channel" release when not used;
*) health - changed PSU state parameter type to read-only;
*) health - removed unused "heater-control" and "heater-threshold" parameters;
*) hotspot - added "vlan-id" parameter support for hosts and HTML pages;
*) hotspot - added support for captive portal advertising using DHCP (RFC7710);
*) hotspot - fixed "html-directory" parameter export;
*) hotspot - improved management service stability when receiving bogus packets;
*) ike1 - fixed "my-id=address" parameter usage together with certificate authentication;
*) ike1 - fixed 'rsa-signature-hybrid' authentication method;
*) ike1 - fixed memory leak on multiple CR payloads;
*) ike1 - fixed policy update with and without mode configuration;
*) ike1 - rekey phase 1 as responder for Windows initiators;
*) ike2 - added "prf-algorithm" support for phase 1;
*) ike2 - added support for IKEv2 Message Fragmentation (RFC7383);
*) ike2 - fixed EAP MSK length validation;
*) ike2 - fixed too small payload parsing;
*) ike2 - improved EAP message integrity checking;
*) ike2 - improved child SA rekeying process;
*) interface - added temperature warning and interface disable on overheat for SFP and SFP+ interfaces (CLI only);
*) interface - fixed pwr-line running state (introduced in v6.45);
*) ipsec - added SHA384 hash algorithm support for phase 1;
*) ipsec - do not kill connection when peer's "name" or "comment" is changed;
*) ipsec - fixed client certificate usage when certificate is renewed with SCEP;
*) ipsec - fixed multiple warning message display for peers;
*) ipsec - inactivate peer's policy on disconnect;
*) ipsec - refresh peer's DNS only when phase 1 is down;
*) kidcontrol - allow creating static device entries without assigned user;
*) led - fixed state persistence after device reboot on NetMetal 5 ac devices;
*) lora - fixed device going into "ERROR" state caused by FSK modulated downlinks;
*) lora - limited output power in RU region for range 868.7 MHz - 869.2 MHz according to regulations;
*) lte - added "age" column and "max-age" parameter to "cell-monitor" (CLI only);
*) lte - added "comment" parameter for APN profiles;
*) lte - added support for Alcatel IK41VE1;
*) lte - fixed "band" value reporting;
*) lte - increased "at+cops" reply timeout to 90 seconds;
*) m33g - added support for "/system gpio" menu (CLI only);
*) metarouter - allow creating RouterOS metarouter instances on devices with 16MB flash storage;
*) metarouter - fixed memory leak when tearing down metarouter instance;
*) ppp - added "bridge-learning" parameter support;
*) ppp - added "ipv6-routes" parameter to "secrets" menu;
*) ppp - added support for "Framed-IPv6-Route" RADIUS attribute;
*) ppp - store "last-caller-id" for PPP secrets;
*) ppp - store "last-disconnect-reason" for PPP secrets;
*) profile - added "lcd" process classificator;
*) profile - improved idle process detection on x86 processors;
*) profile - improved process classification on ARM devices;
*) quickset - added "Port Mapping" to QuickSet;
*) quickset - fixed local IP address setting on master interface;
*) route - improved stability when 6to4 interface is configured with disabled IPv6 package;
*) routerboard - fixed PCIe bus reset during power-on on MMIPS devices ("/system routerboard upgrade" required);
*) routerboard - force power-down on PCIe bus during reboot on LHGR devices ("/system routerboard upgrade" required);
*) script - added error message in the logs if startup script runtime limit was exceeded;
*) snmp - added information from IPsec "active-peers" menu to MIKROTIK-MIB;
*) snmp - added new LTE monitoring OID's to MIKROTIK-MIB;
*) snmp - fixed value types for "dot1dStp";
*) snmp - fixed value types for "dot1qPvid";
*) ssh - fixed returned output saving to file when "output-to-file" parameter is used;
*) ssh - skip interactive authentication when not running in interactive mode;
*) supout - added bonding interface monitor information;
*) supout - improved autosupout.rif file generation process;
*) timezone - updated timezone information from "tzdata2020d" release;
*) tr069-client - added "X_MIKROTIK_MimoRSRP" parameter for LTE RSRP value reporting;
*) tr069-client - added LTE model and revision parameters;
*) tr069-client - added additional wireless registration table parameters;
*) tr069-client - added branding package build time parameter;
*) tr069-client - added wireless "noise-floor" and "overall-tx-ccq" information parameters;
*) tr069-client - allow passing LTE firmware update URL as XML;
*) tr069-client - fixed RouterOS downgrade procedure;
*) tr069-client - fixed TotalBytesReceived parameter value;
*) tr069-client - send correct "ConnectionRequestURL" when using IPv6;
*) traffic-flow - added "sys-init-time" parameter support;
*) traffic-flow - added NAT event logging support for IPFIX;
*) traffic-generator - fixed 32Gbps limitation;
*) user-manager - do not allow creating limitation that crosses midnight;
*) user-manager - updated PayPal's root certificate authorities;
*) webfig - allow hiding QuickSet mode selector;
*) webfig - allow hiding and renaming inline buttons;
*) webfig - fixed default value presence when creating new entries under "IP/Kid Control";
*) webfig - properly stop background processes when switching away from QuickSet tab;
*) winbox - added "src-mac-address" parameter under "IP/DHCP-Server/Leases" menu;
*) winbox - added missing IGMP Snooping settings to "Bridge" menu;
*) winbox - added missing MSTP settings to "Bridge" menu;
*) winbox - added support for LTE Cell Monitor;
*) winbox - allow adding bonding interface with one slave interface;
*) winbox - allow performing "USB Power Reset" on "0" bus on RBM33G;
*) winbox - do not show "network-mode" parameter for LTE interfaces that do not support it;
*) winbox - fixed "IP->Kid Control->Devices" table automatic refreshing;
*) winbox - fixed "interface" and "on-interface" parameter presence under "Bridge/Hosts" menu;
*) winbox - fixed "receive-errors" setting persistence under "Wireless/Wireless Sniffer/Settings" menu;
*) winbox - fixed "tls-version" parameter setting under "IP/Services" menu;
*) winbox - fixed minor typo in "Users" menu;
*) winbox - provide sane default values for bridge "VLAN IDs" parameter;
*) winbox - use health values reported by gauges for "System/Health" menu;
*) wireless - added U-NII-2 support for US and Canada country profiles for mANTBox series devices;
*) wireless - create "connect-list" rule when address specified for "setup-repeater";
*) wireless - do not override MTU and ARP values from CAPsMAN with local forwarding;
*) wireless - improved WPS process stability;
*) wireless - increased "group-key-update" maximum value to 1 day;
*) wireless - updated "indonesia5" regulatory domain information;
*) wireless - updated "no_country_set" regulatory domain information;

Nikiforos
23-12-20, 18:25
μπα τι βλεπω εβγαλαν netistall για linux??? :worthy::respekt: its about TIME!!!!!!

BillyVan
25-12-20, 19:20
Απλά τεράστιο...
What's new in 6.48 stable (2020-Dec-22 11:20):


Χρόνια πολλά!

Πράγματι ένας χαμός...ας περιμενουμε λίγο γιατι διαβάζω αρκετους με προβλήματα μετα την αναβάθμιση.

deniSun
25-12-20, 20:21
Πράγματι ένας χαμός...ας περιμενουμε λίγο γιατι διαβάζω αρκετους με προβλήματα μετα την αναβάθμιση.

Πάντα υπήρχαν και πάντα θα υπάρχουν.

Χρόνια πολλά!

RpMz
26-12-20, 16:45
Εμένα σταμάτησε να κάνει ανανέωση η υπηρεσία του OpenDNS (μέσω script). Έκανα downgrade και επανήλθε.

macro
26-12-20, 19:58
Γραψτο στο forum για να το διορθωσουν.

deniSun
27-12-20, 11:26
Εμένα σταμάτησε να κάνει ανανέωση η υπηρεσία του OpenDNS (μέσω script). Έκανα downgrade και επανήλθε.

Μήπως έχει αλλάξει κάτι στο script του ros;

RpMz
27-12-20, 11:28
Μόλις μου απαντήσουν από το support θα σας πω.

jkarabas
27-12-20, 17:16
Χρόνια Πολλά σε όλους με υγεία!!
Το δικό μου script για το duckdns δουλεύει κανονικά μετά το update.

deniSun
03-02-21, 18:14
Απαραίτητη για "Πατριώτες"...
What's new in 6.49beta11 (2021-Feb-3 08:42):

Changes in this release:


*) chr - improved stability when changing "flow-control" settings on interfaces with e1000 drivers;
*) crs312 - fixed missing SwOS firmware on revision 2 devices;
*) crs3xx - fixed packet duplication when multiple bonding interfaces are created for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - fixed packet transmit in 5Gbps link rate for CRS312 device;
*) crs3xx - fixed port-isolation on bonding interfaces for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - fixed port-isolation on ether37-ether48 ports for CRS354 device;
*) crs3xx - improved LACP linking between CRS3xx series switches;
*) crs3xx - improved QSFP+ linking and mode changing for CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - improved load balancing on bonding interfaces for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - improved packet transmit on SFP+ interfaces;
*) crs3xx - improved system stability when bonding and IGMP snooping is used (introduced in v6.48);
*) defconf - fixed minor typo in configuration description;
*) dot1x - fixed "reject-vlan-id" for MAC authentication (introduced in v6.48);
*) dot1x - fixed MAC authentication fallback (introduced in v6.48);
*) ethernet - fixed cable-test for some devices (e.g. RB2011, RB951G-2HnD);
*) fastpath - fixed IP packet receive on bridge and bonding interfaces when destination MAC address match with slave port MAC;
*) hotspot - fixed "idle-timeout" usage with RADIUS authentication;
*) hotspot - fixed special character parsing in "target" variable (CVE-2021-3014);
*) ike2 - added support for ASN.1 DN "my-id" value setting for initiators;
*) ike2 - fixed EAP MSK length validation (introduced in v6.48);
*) ike2 - fixed phase 2 rekeying with enabled PFS (introduced in v6.48);
*) ike2 - improved stability when invalid certificate is configured (introduced in v6.48);
*) ike2 - properly register packet time after expensive CPU operations;
*) interface - fixed pwr-line interface linking (introduced in v6.48);
*) ipsec - improved stability when processing IPv6 packets larger than interface MTU;
*) led - fixed default LED configuration for RB911-5HnD;
*) netinstall - improved bootp packet handling on Linux netinstall-cli version when multiple NIC's are present;
*) ntp - use correct IPv6 multicast group for SNTP client;
*) package - always allow to uninstall package even if there is no free disk space left;
*) package - do not include multiple The Dude packages in HDD installer;
*) sfp - added "sfp-rate-select" setting (CLI only);
*) sfp - fixed GPON module linking (introduced in v6.47);
*) sfp - improved cable length monitoring as defined per SFF-8472 and SFF-8636;
*) snmp - fixed "send-trap" functionality (introduced in v6.48);
*) snmp - fixed SNMP trap agent address;
*) switch - fixed interface toggling for devices with multiple QCA8337, Atheros8327 or RTL8367 switch chips (introduced in v6.48);
*) switch - improved packet transmit between CPU and 98PX1012 for CCR2004-1G-12S+2XS device;
*) tr069-client - added "X_MIKROTIK_LinkDowns" parameter for interface "link-downs" value reporting;
*) upgrade - fixed free space checking on flash type memories when installing new packages;
*) webfig - fixed new interface addition;
*) winbox - do not show empty "CPU Frequency" parameter under "System/Resources" menu;
*) winbox - fixed enable/disable button presence for "Bridge/Hosts" menu;
*) winbox - renamed IP protocol 41 to "ipv6-encap";
*) wireless - renamed "macedonia" regulatory domain information to "north macedonia";

BillyVan
03-02-21, 18:36
το χαλι μας το μαυρο
γελαω με το renamed...erased επρεπε να λεει

jkarabas
04-02-21, 18:49
Απαραίτητη για "Πατριώτες"...
What's new in 6.49beta11 (2021-Feb-3 08:42):

Changes in this release:


Denisun προσπάθησα να σου στείλω pm αλλά δεν μπορώ. Πώς μπορώ να έρθω σε επαφή μαζί σου έστω και με email. Σε θέλω κάτι προσωπικό. Ευχαριστώ.

deniSun
05-02-21, 17:38
Denisun προσπάθησα να σου στείλω pm αλλά δεν μπορώ. Πώς μπορώ να έρθω σε επαφή μαζί σου έστω και με email. Σε θέλω κάτι προσωπικό. Ευχαριστώ.

Στείλε τώρα.

- - - Updated - - -

6.48.1 changelog [stable]:

*) crs312 - fixed missing SwOS firmware on revision 2 devices;
*) crs3xx - fixed packet duplication when multiple bonding interfaces are created for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - fixed port-isolation on ether37-ether48 ports for CRS354 device;
*) crs3xx - improved load balancing on bonding interfaces for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - improved system stability when bonding and IGMP snooping is used (introduced in v6.48);
*) hotspot - fixed "idle-timeout" usage with RADIUS authentication;
*) hotspot - fixed special character parsing in "target" variable (CVE-2021-3014);
*) ike2 - fixed phase 2 rekeying with enabled PFS (introduced in v6.48);
*) ike2 - improved stability when invalid certificate is configured (introduced in v6.48);
*) ike2 - properly register packet time after expensive CPU operations;
*) interface - fixed pwr-line interface linking (introduced in v6.48);
*) ipsec - improved stability when processing IPv6 packets larger than interface MTU;
*) led - fixed default LED configuration for RB911-5HnD;
*) package - do not include multiple The Dude packages in HDD installer;
*) snmp - fixed "send-trap" functionality (introduced in v6.48);
*) switch - fixed interface toggling for devices with multiple QCA8337, Atheros8327 or RTL8367 switch chips (introduced in v6.48);
*) winbox - fixed enable/disable button presence for "Bridge/Hosts" menu;
*) wireless - renamed "macedonia" regulatory domain information to "north macedonia";

deniSun
09-02-21, 20:00
[long-term] What's new in 6.47.9 (2021-Feb-05 15:22):

Changes since 6.47.8:


*) bgp - fixed VPNV4 RD byte order;
*) branding - fixed LCD logo loading from new style branding package;
*) crs312 - fixed missing SwOS firmware on revision 2 devices;
*) crs3xx - correctly filter packets by L2MTU size;
*) crs3xx - improved system stability when receiving large frames for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices (introduced in v6.47.5);
*) defconf - fixed default configuration loading on RBcAP-2nD and RBwAP-2nD;
*) hotspot - fixed "idle-timeout" usage with RADIUS authentication;
*) hotspot - fixed special character parsing in "target" variable (CVE-2021-3014);
*) package - do not include multiple The Dude packages in HDD installer;
*) snmp - fixed "send-trap" functionality;
*) webfig - fixed new interface addition;
*) winbox - fixed enable/disable button presence for "Bridge/Hosts" menu;
*) winbox - renamed IP protocol 41 to "ipv6-encap";
*) winbox - show "System/Health" only on boards that have health monitoring;
*) winbox - use health values reported by gauges for "System/Health" menu;
*) wireless - renamed "macedonia" regulatory domain information to "north macedonia";
*) wireless - updated "indonesia5" regulatory domain information;

deniSun
08-03-21, 14:56
6.49beta22 changelog:
Changes in this release:


*) bridge - added IGMP and MLD querier monitoring (CLI only);
*) bridge - added IGMP snooping log when multicast table gets full;
*) bridge - added MAC and IP source addresses information for DHCP snooping log;
*) bridge - improved bridge stability when host changes port (introduced in v6.47);
*) conntrack - increased total connection tracking table size based on installed RAM size;
*) console - require "write+ftp" permissions for executing script to file;
*) console - require "write+ftp" permissions for exporting configuration to file;
*) console - require "write+ftp" permissions for printing to file;
*) console - updated copyright notice;
*) crs3xx - correctly filter packets by L2MTU on 1Gbps Ethernet interfaces for CRS354 devices;
*) crs3xx - fixed interface flow control;
*) crs3xx - fixed interface LEDs for QSFP+ and SFP+ interfaces on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - fixed SFP and SFP+ link rate reporting (introduced in v6.48beta11);
*) crs3xx - improved 1Gbps Ethernet port group traffic forwarding for CRS354 devices;
*) crs3xx - improved system stability when receiving large frames on CPU for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) defconf - removed overlapping IPv6 firewall rules;
*) dhcp - fixed link state checking for DHCP client;
*) dhcpv6-server - check if pool name has changed from RADIUS on renew;
*) ethernet - improved system stability when receiving large VLAN tagged packets on IPQ4018/IPQ4019 devices;
*) firewall - fixed GRE protocol packets considered invalid when PPTP helper is disabled;
*) health - fixed voltage monitor on BaseBox5 devices;
*) ike2 - fixed DH group negotiation with EAP;
*) ike2 - fixed initial traffic selector's protocol and port in transport mode;
*) ipv6 - improved system stability when parsing IPv6 options;
*) lora - added additional predefined network servers;
*) m33g - removed 12..16 pins from "/system gpio" menu;
*) netinstall - fixed lock file persistence after reinstall;
*) poe - do not perform PoE firmware upgrade procedure on RB960 and OmniTik devices without PoE out;
*) ppp - do not fail "at-chat" command when issued on disabled PPP interface;
*) quickset - prefer 5GHz interface for WiFi scan in CPE mode;
*) rb922 - fixed miniPCI-e card detection (introduced in v6.49beta11);
*) supout - fixed "topic" column presence in "Log" section;
*) supout - print detailed list of active user sessions;
*) switch - improved resource allocation on 98PX1012 switch chip for CCR2004-1G-12S+2XS device;
*) swos - fixed "static-ip-address" parameter;
*) telnet - do not send options if connecting to non standard port;
*) telnet - fixed server when run on non standard port;
*) upgrade - improved "long-term" upgrade procedure on SMIPS devices;
*) user - fixed "skin" configuration for user groups (introduced in v6.48);
*) webfig - allow to specify "prefix" parameter under "IPv6/ND/Prefixes" menu;
*) webfig - do not corrupt settings when starting "Wireless Sniffer";
*) webfig - do not move top right menu in opposite direction when scrolling horizontally;
*) webfig - do not show newly created SMB shares as invalid;
*) webfig - do not show value units twice;
*) webfig - fixed interface sorting by name;
*) webfig - fixed new interface addition;
*) webfig - fixed "Wireless/CAP" menu opening;
*) webfig - show "Interfaces" menu by default after logging in;
*) webfig - show "network-mode" for LTE modems that support it;
*) webfig - show only "Close" button under "Wireless/Wireless Sniffer/Sniffed Packets" menu;
*) winbox - added "Channel" parameter under "System/Console" menu;
*) winbox - added "interface-speed-100G" LED type to "System/LEDs" menu;
*) winbox - fixed duplicate "Trusted" setting under "Interface/Bridge/Ports" menu;
*) winbox - fixed QCA-8511 switch chip type reporting under "Switch/Settings" menu;
*) winbox - fixed "reachable-time" value unit under "IPv6/ND" menu;
*) winbox - fixed support for "Delegated-IPv6-Prefix" for PPP services;
*) winbox - increased "target" field limit to 128 under "Queues" menu;
*) winbox - show "activity" column by default under "IP/Kid Control/Devices" menu;
*) winbox - show "LCD" only on boards that have LCD;
*) winbox - show "System/Health" only on boards that have health monitoring;
*) wireless - fixed minor typo in debug logging messages;
*) wireless - renamed "secondary-channel" to "secondary-frequency";
*) wireless - updated "united kingdom" regulatory domain information;

minas
08-03-21, 17:04
Δεν ξέρω εάν είναι καλό ή κακό ότι ακόμα κάνουν βελτιώσεις στα CRS3xx, που είναι πλέον η βασική γκάμα των switches.
Εάν είναι έτσι στην 6, δεν θέλω να δω τι θα γίνει με την μετάβαση σε ROS 7 :).

deniSun
08-03-21, 18:01
Δεν ξέρω εάν είναι καλό ή κακό ότι ακόμα κάνουν βελτιώσεις στα CRS3xx, που είναι πλέον η βασική γκάμα των switches.
Εάν είναι έτσι στην 6, δεν θέλω να δω τι θα γίνει με την μετάβαση σε ROS 7 :).

Σε όλα τα μοντέλα κάνουν διορθώσεις.
Ακόμα και στα ccr.

minas
08-03-21, 18:50
Σε όλα τα μοντέλα κάνουν διορθώσεις.
Ακόμα και στα ccr.

Από μνήμης, νομίζω ότι στα changelogs του τελευταίου χρόνου (ίσως και λίγο παραπάνω) οι διορθώσεις σε σχετικά επιπόλαια προβλήματα των CRS3xx είναι στατιστικά πιο πιθανές από οποιαδήποτε άλλη κατηγορία συσκευών.

deniSun
08-03-21, 19:53
Από μνήμης, νομίζω ότι στα changelogs του τελευταίου χρόνου (ίσως και λίγο παραπάνω) οι διορθώσεις σε σχετικά επιπόλαια προβλήματα των CRS3xx είναι στατιστικά πιο πιθανές από οποιαδήποτε άλλη κατηγορία συσκευών.

Δεν κρατάω στατιστικά, αλλά δεν μου λέει και κάτι το να βγάζουν επιδιορθώσεις για κάποια μοντέλα.
Θα με πείραζε αν δεν έβγαζαν τίποτε αφού είμαι της θεωρίας ότι τίποτε δεν είναι τέλειο.

@ ADSLgr.com All rights reserved.