Επιστροφή στο Forum : Περί ROS ο λόγος...
Εγώ δεν την έχω δει καν
Τι σε εμποδίζει;
xristostsilis
13-09-24, 17:29
Και μόνο που έβαλαν υποστηριξη macOS μου αρέσει. σιγά σιγά θα το φτιάξουν το πράμα πιστεύω
Και μόνο που έβαλαν υποστηριξη macOS μου αρέσει. σιγά σιγά θα το φτιάξουν το πράμα πιστεύω
παιζει και σε mac mini g4???
Την έβαλα και δεν μου αρέσει καθόλου. Καταρχήν είχα την ελπίδα για μαύρο interface αλλά Κούκου και 2ον λείπουν καρτέλες? Στο παλιό παταω interfaces και βγάζει 10 tab, στο νέο βγάζει 1.
Την έβαλα και δεν μου αρέσει καθόλου. Καταρχήν είχα την ελπίδα για μαύρο interface αλλά Κούκου και 2ον λείπουν καρτέλες? Στο παλιό παταω interfaces και βγάζει 10 tab, στο νέο βγάζει 1.
Εγώ που είμαι φανατικός οπαδός του dark
θα έλεγα ότι και το παλιό των 3.Χ δεν μου δημιουργούσε κανένα θέμα.
Εγώ που είμαι φανατικός οπαδός του dark
θα έλεγα ότι και το παλιό των 3.Χ δεν μου δημιουργούσε κανένα θέμα.
Όντας σε μόνιτορ μπροστά από το 1984 για πολλές ώρες (πρασινο το 1ο στον Amstrad), δεν αντέχω πλέον τίποτα λευκό μετά από 40 χρόνια.
Τουλάχιστον τα δικά μου μισά χρόνια ήταν με λαμπατες, να δω τους νέους με τις κουκουled τι θα πάθουν στα γεράματα.
Όντας σε μόνιτορ μπροστά από το 1984 για πολλές ώρες (πρασινο το 1ο στον Amstrad), δεν αντέχω πλέον τίποτα λευκό μετά από 40 χρόνια.
Τουλάχιστον τα δικά μου μισά χρόνια ήταν με λαμπατες, να δω τους νέους με τις κουκουled τι θα πάθουν στα γεράματα.
Το πράσινο του amstrad ήταν μια χαρά.
Το γκρι του spectrum και μάλιστα σε tv ήταν θανατηφόρο.
Έτσι χαλάσαμε τα μάτια μας...
What's new in 7.16 (2024-Sep-20 16:00):
*) 6to4 - fixed 6to4 tunnel LL address generation after system reboot;
*) 6to4 - improved system stability when using 6to4 tunnel without specified remote-address;
*) 6to4 - limit keepalive timeout maximum value;
*) address - added "S" flag for addresses that belong to a slave interface;
*) arm64 - fixed "disable-running-check" for ARM64 UEFI;
*) arm64 - increased reserved storage space for bootloader;
*) arm64/x86 - added rtl8111/8168/8411 firmware;
*) arp - fixed possible issue with invalid entries;
*) bgp - fixed BGP sessions missing vpnv6 afi;
*) bgp - fixed cluster-list and originator-id;
*) bgp - fixed corrupted as-path when received update with empty AS_PATH attribute (introduced in v7.15);
*) bgp - fixed minor logging typo;
*) bgp - fixed vpnv6 safi;
*) bgp - small logging improvements;
*) bridge - added dynamic tagged entry when VLAN interface is created on vlan-filtering bridge;
*) bridge - added forward-reserved-addresses property which controls forwarding of MAC 01:80:C2:00:00:0x range (separated from "protocol-mode=none" functionality, disabled by default after upgrade);
*) bridge - added L2 MDB support for IGMP snooping;
*) bridge - added max-learned-entries property for bridge;
*) bridge - added message about who created a dynamic VLAN entry;
*) bridge - added MVRP support for VLANs assigned to bridge;
*) bridge - do not allow duplicate ports;
*) bridge - fixed BPDU address when using "ether-type=0x88a8" configuration;
*) bridge - fixed MVRP leave;
*) bridge - fixed port "point-to-point" status after first link change;
*) bridge - fixed typo in filter and NAT error message;
*) bridge - improved system stability when removing MLAG configuration;
*) bridge - show invalid flag for ports that fails to be added to bridge (e.g. maximum port limit of 1024 is reached);
*) bth - improved stability on system time change;
*) certificate - added no-key-export parameter for import;
*) certificate - added support for cloud-dns challenge validation for sn.mynetname.net (CLI only);
*) certificate - automatically parse uppercase symbols to lowercase when registering domain on Let's Encrypt;
*) certificate - improved DNS challenge error reporting for Let's Encrypt;
*) certificate - improved RSA key signature processing speed;
*) certificate - show validity beyond year 2038;
*) chr - added support for licensing over IPv6 network;
*) chr - fixed incorrect disk size for ARM64;
*) console - added "about" filters for "find" and "print where" commands;
*) console - added "verbose=progress" mode for import status updates, and verbose output only on failures;
*) console - added additional byte-array option to :convert command;
*) console - added dry-run parameter to simulate import of files and find syntax errors without making configuration changes (verbose only);
*) console - added limits for dst-start and dst-end clock properties;
*) console - added lock screen via :lock command;
*) console - added uppercase and lowercase transform modes to :convert command;
*) console - disallow ping command with empty address;
*) console - display hint when requesting specific argument syntax;
*) console - do not show default boot-os setting in export;
*) console - fixed an issue where certain MAC address can be interpreted as time value;
*) console - fixed negative values for gmt-offset clock property;
*) console - fixed output of ping command in certain cases;
*) console - fixed typo in firewall error message;
*) console - improved :serialize and :deserialize commands and added support for DSV (delimiter separated values) format;
*) console - improved large import file handling, error detection and stability;
*) console - improved stability when pasting a large input;
*) console - improved stability when removing script;
*) console - increased default width for bitrate type of columns;
*) console - removed follow-strict parameter;
*) console - show rest-api name for active user connections;
*) container - clear VETH address on container exit and mark interface as running only when VETH is in use;
*) defconf - configure the default-route property for PPP clients only on devices with a built-in modem;
*) detnet - properly detect "Internet" status when multiple detnet instances preset in network;
*) dhcp - added comment property for matchers, options and option sets;
*) dhcp - improved DHCP IPv4 and IPv6 client/relay/server underlying interface state change handling;
*) dhcp - improved insert-queue-before, parent-queue and allow-dual-stack-queue behavior;
*) dhcpv4-client - execute script on DNS server or gateway address change;
*) dhcpv4-server - added "class-id" parameter for DHCP server leases;
*) dhcpv4-server - added matcher ability to match substring;
*) dhcpv4-server - added name for "User-Class" option (77), "Authentication" option (90), "SIP-Servers-DHCP-Option" option (120) and "Unassigned" option (163-174) in debug logs;
*) dhcpv4-server - fixed setting and getting "next-server" property;
*) dhcpv4-server - increased lease offer timeout to 120 seconds;
*) dhcpv4-server - remove corresponding dynamic leases if their address-pool gets removed;
*) dhcpv4-server - show active-server and host-name in print active command;
*) dhcpv6-client - do not add default gateway twice when both prefix and address is acquired;
*) dhcpv6-client - fixed T1, T2, valid-lifetime and preferred-lifetime compliance with RFC8415 by using value 0;
*) dhcpv6-client - pause client and remove dynamically installed objects while it becomes invalid;
*) dhcpv6-client - release client on failed renew attempt;
*) dhcpv6-client - update gateway address for default route on renew;
*) dhcpv6-server - improved system stability;
*) discovery - added discover-interval setting;
*) discovery - added LLDP Port VLAN ID, Port And Protocol VLAN ID, VLAN Name TLVs support;
*) discovery - added LLDP-MED timeout;
*) discovery - changed default discover-interval setting from 60s to 30s;
*) discovery - set unknown bit for any unspecified link type in MAC/PHY TLV;
*) disk - added "wipe-quick" file-system option to format-drive command (CLI only);
*) disk - added log message when disks get added or removed;
*) disk - added simple test command to test device and filesystem speeds (CLI only);
*) disk - improved system stability;
*) disk - remove dummy "slot1" entries on CHR;
*) dns - added support for DoH with adlist;
*) dns - added support for DoH with static FWD entries;
*) dns - added support for mDNS proxy;
*) dns - improved imported adlist parsing;
*) dns - refactored adlist service internal processes and improved logging;
*) dns - refactored DNS service internal processes;
*) dns - show static entry type "A" field in console;
*) dude - fixed map element RouterOS package upgrade functionality;
*) ethernet - fixed port speed downshift functionality for CRS354 devices;
*) ethernet - improved system stability for Alpine CPUs when dealing with unexpected non-UDP/TCP packet transmit;
*) fetch - handle HTTP 401 status correctly;
*) fetch - improved logging;
*) file - renamed "creation-time" to "last-modified";
*) filesystem - improved boot speed after device is rebooted without proper shutdown;
*) filesystem - refactored internal processes to minimize sector writes;
*) firewall - added message when interface belonging to VRF is added in filter rules;
*) firewall - fixed an issue with unsetting src-address-type;
*) firewall - fixed IPv6 "nth" matcher showing up twice in help;
*) firewall - fixed issue that prevents restoring src-address-list and dst-addres-list properties using undo command;
*) firewall - removed unnecessary TLS host matcher from NAT tables;
*) health - fixed board-temperature for KNOT device (introduced in v7.15);
*) health - fixed bogus CPU temperature spikes for CCR2216 device;
*) health - fixed missing health for CRS112-8G-4S device (introduced in v7.15);
*) health - improved voltage measurements for RB912UAG-6HPnD and RB912UAG-5HPnD devices;
*) health - removed unnecessary health settings for RB921 and RB922 devices;
*) health - upgraded fan controller firmware to latest version;
*) hotspot - properly escape all reserved URI characters;
*) ike1 - removed unsupported NAT-D drafts with invalid payload numbers;
*) ike2 - improved performance by balancing multicore CPU usage for key exchange calculation;
*) install - allow to save old configuration during cdrom install;
*) install - fixed ARM64 cdrom install (introduced in v7.15);
*) iot - added an option to delete default LoRa servers and a button to recover them if needed;
*) iot - added an option to log LoRa filtered packets;
*) iot - added LoRa NetID and JoinEUI filtering for LNS and CUPS connections;
*) iot - added LoRa option to filter out proprietary packets;
*) iot - fixed incorrect LoRa filter export behavior;
*) iot - fixed LoRa inability to set SSL for LoRa servers via command line;
*) iot - fixed LoRa inability to use variables for GPS-spoofing setting;
*) ip - added max-sessions property for services;
*) ip/ipv6 - added multipath hash policy settings;
*) ipip6 - make IPv6 LL address random;
*) ipsec - changed default dpd-interval from 2 minutes to 8 seconds and dpd-maximum-failures from 5 to 4;
*) ipsec - improved installed SA statistics update;
*) ipv6 - added "d" deprecated flag for expired IPv6 SLAAC addresses;
*) ipv6 - allow to properly disable address when it is generated from pool;
*) ipv6 - allow to properly move IPv6 address from slave interface to a bridge interface;
*) ipv6 - do not allow adding address with invalid prefix when using pool;
*) ipv6 - do not allow to manually delete LL address;
*) ipv6 - fixed "no-dad" functionality;
*) ipv6 - fixed dynamic duplicate address showing when static address is already configured;
*) ipv6 - fixed pool allocated addresses missing after reboot;
*) ipv6 - fixed SLAAC address dynamic appearance;
*) ipv6 - improved handling of IPv6 address information;
*) ipv6 - improved LL address generation process;
*) ipv6 - properly initialize default ND "interface=all" entry;
*) ipv6 - respect APN settings for "add-default-route" and "use-peer-dns" also when "accept-router-advertisements=yes";
*) ipv6 - warn user that reboot is required in order to properly apply accept-router-advertisements changes;
*) isis - fixed filter-chain and filter-select settings;
*) isis - install IPv6 link-local gateways correctly;
*) l2tp - improved system stability;
*) l3hw - added per-VLAN packet and byte counters to compatible switches;
*) l3hw - disable L3HW on bonding modes that do not support it;
*) log - added basic validation for "disk-file-name" property;
*) lte - added "sms-protocol" setting in "/interface lte" menu (CLI only);
*) lte - fixed "at-chat" for DELL T99W175 (PID: 0x05c6 VID: 0x90d5);
*) lte - fixed cases where LTE interface would take long time to become ready after bootup for Chateau 5G and Chateau 5G R16 (introduced in v7.15);
*) lte - fixed cases where modem could be handled by multiple dialer instances;
*) lte - fixed modem firmware upgrade for Chateau 5G and Chateau 5G R16 (introduced in v7.15);
*) lte - fixed possible crash when enabling/disabling config-less modem interface;
*) lte - fixed R11e-LTE no traffic flow when modem with older firmware version is used;
*) lte - fixed support for Fibocom modem fm150-na;
*) lte - improved modem AT/modem port open;
*) lte - improvements to "/interface/lte/show-capabilities" command;
*) media - improved file indexing for DLNA;
*) modem - added authentication functionality to EC200A;
*) modem - fixed PPP link recovery when port unexpectedly removed and returned due to modem firmware crash;
*) modem - fixed unresponsive PPP link recovery when TX bandwidth was exceeding link capacity;
*) modem - improved support for KNOT BG77 modem firmware update;
*) mqtt - broker password is no longer exported unless "show-sensitive" flag is used;
*) netinstall-cli - added check for device and package architectures match;
*) netinstall-cli - added support for multiple device install;
*) netinstall-cli - allow mixed package architectures;
*) netwatch - added DNS probe;
*) netwatch - added ttl and accept-icmp-time-exceeded properties for ICMP probe;
*) netwatch - use time format according to ISO standard;
*) ospf - improved system stability during LSA monitoring;
*) ovpn - improved system stability;
*) pimsm - improved system stability;
*) poe-out - fixed low-voltage detection while PD is connected for KNOT device;
*) poe-out - fixed silent firmware upgrade fail on CRS112-8P-4S device (introduced in v7.15);
*) poe-out - upgraded firmware for SAMD20 PSE (AF/AT) controlled boards (the update will cause brief power interruption to PoE-out interfaces);
*) port - added IPv6 support for the "remote-access" feature;
*) ppp - added SIM hot-plug enable command to default init-string for KNOT and CME gateway;
*) ppp - added support for IPv6-only domain names to l2tp-client, ovpn-client and sstp-client;
*) ppp - automatically generate IPv6 firewall rules when filter-id is specified;
*) ppp - fixed dynamic queue default name (introduced in v7.15);
*) ppp - fixed PPP info parser showing error for BG77 modem running on KNOT AUX AT/modem port;
*) profiler - classify wifi processing as "wireless";
*) ptp - added PTP support for CCR2116-12G-4S+, CCR2216-1G-12XS-2XQ, CRS518-16XS-2XQ, CRS504-4XQ, CRS510-8XS-2XQ devices;
*) qos-hw - added H and I flags to queues;
*) qos-hw - added new monitoring properties for ports and global QoS stats;
*) qos-hw - added queue-buffers property to tx-manager;
*) qos-hw - allow port print stats, usage and pfc while QoS is disabled;
*) qos-hw - allow to set queue-buffers in bytes, percent or auto;
*) qos-hw - enabling ECN forces WRED (unless share is disabled);
*) qos-hw - fixed egress-rate limit validation;
*) qos-hw - fixed global buffer limits for 98DX8212 and 98DX8332 switches;
*) qos-hw - fixed WRED thresholds;
*) qos-hw - improved behavior when changing ports tx-manger;
*) qos-hw - limit WRED to queues with enabled shared buffers;
*) queue - improved system stability;
*) quickset - removed Basic AP mode;
*) rose-storage - fixed "/file sysnc status" parameter to be read-only;
*) rose-storage - moved "/rsync-daemon" to "/file rsync-daemon;
*) rose-storage - renamed sync "remote-addr" property to "remote-address";
*) route - added ability to redistribute isis routes;
*) route - fixed incorrectly handled route distinguisher and route targets (introduced in v7.15);
*) route - fixed memory leak (introduced in v7.15);
*) route - fixed some missing route parameters when printing (introduced in v7.15);
*) route - improved route attribute handling (may increase memory usage);
*) route - improved routing table update performance;
*) route - improved stability when getting entries from large routing tables;
*) route - place static route in the correct VRF when vrf-interface parameter is used;
*) route - rename route type from is-is to isis;
*) routerboard - improved Etherboot stability for CRS320-8P-8B-4S+ device ("/system routerboard upgrade" required);
*) routerboard - improved Etherboot stability for IPQ-40xx devices ("/system routerboard upgrade" required);
*) routerboot - improved boot process ("/system routerboard upgrade" required);
*) rpki - fixed preference sorting;
*) sfp - fixed calculated link length based on EEPROM in certain cases;
*) sfp - fixed missing traffic after reboot with S-RJ01 module running at 10/100 Mbps rate on CCR2004-16G-2S+ device;
*) sfp - fixed SFP28 interface with fec74 mode on CCR2004-1G-2XS-PCIe device;
*) sfp - fixed SFP28 jumbo frame processing on CCR2004-1G-2XS-PCIe device;
*) sms - added polling setting so that RouterOS itself checks SMS instead of relying on URC messages;
*) snmp - added support for KNOT BG77 modem cellular signal info;
*) snmp - fixed LAST-UPDATED format in MIKROTIK-MIB;
*) ssh - fixed SSH cryptographic accelerator selection for GCM cipher (introduced in v7.14);
*) ssh - fixed unsupported user SSH public key import (introduced in v7.15);
*) ssh - improved system stability when SSH tries to bind to non-existing interface;
*) supout - added detnet section;
*) supout - added monitor command for all wifi interfaces;
*) supout - added netwatch section;
*) supout - added user SSH keys section;
*) supout - increased console output width;
*) supout - limit address-list and connection tracking entries to 999 in supout.rif;
*) supout - rename "store" section to "disk";
*) switch - fixed an issue where half-duplex links could occupy Tx resources for 98DX8xxx, 98DX4xxx, 98DX325x switch chips;
*) switch - fixed an issue with Ethernet port group hang for CRS354 devices;
*) switch - fixed Ethernet interface counter 32bit overflow for CRS354 devices;
*) switch - fixed limited Tx traffic on Ethernet ports for CRS354 devices (introduced in v7.15);
*) switch - improved switch reset;
*) switch - improved system stability on CCR2116-12G-4S+, CCR2216-1G-12XS-2XQ devices;
*) system - added "clock" logging topic for time change related messages;
*) system - added critical log message when not enough space to store new configuration;
*) system - added log message if device failed to reboot gracefully;
*) system - added more details to user initiated reboot (reset, upgrade, downgrade);
*) system - added support for upgrade over IPv6 network;
*) system - do not cancel package upgrade if another architecture packages found on the router;
*) system - do not download packages scheduled for uninstall;
*) system - do not start IPsec and certificate processes when not necessary;
*) system - fixed "free disk space" error message on system upgrade/downgrade;
*) system - fixed an issue where routing configuration was missing after performing a reset, adding a new configuration and then upgrading (introduced in v7.15);
*) system - fixed empty logs after reboot in certain cases;
*) system - improved internal system services messaging;
*) system - improved performance for TCP input;
*) system - improved reporting of total memory size;
*) system - improved system stability for CCR2004-1G-2XS-PCIe device;
*) system - improved system stability for RBSXTsq5nD and RBLDF-5nD;
*) system - improved system stability;
*) system - improved watchdog and kernel panic reporting;
*) system - reduced RAM usage for ARM64 devices;
*) system - set flash-boot mode as "boot-device" after system reset initiated by reset button ("/system routerboard upgrade" required);
*) system - set flash-boot mode as "boot-device" after system reset initiated from software;
*) traceroute - do not stop traceroute after 5 consecutive unreachable hops;
*) tunnel - allow specifying IPv6 LL address as "remote-address" for EoIPv6, GRE6 and IPIP6 tunnels;
*) user - added inactivity timeout for non-GUI sessions;
*) user-manager - updated logo;
*) vxlan - added comment support to VTEPs;
*) vxlan - prevent creating multiple VTEPs with same IP/port combination;
*) webfig - allow to enter time that exceeds 23:59:59;
*) webfig - correctly display default value for number type;
*) webfig - enabled hotlock mode for terminal;
*) webfig - fixed an issue where wrong menu title was shown;
*) webfig - fixed issue with incorrectly applying optional fields;
*) webfig - fixed sorting by datetime;
*) webfig - use "any" argument by default for Torch "Port" property;
*) wifi - added "slave-name-format";
*) wifi - added interface provisioning logs;
*) wifi - adjusted virtual interface naming when provisioning local radios;
*) wifi - do not allow frequency-scan on virtual interfaces;
*) wifi - do not unset radio-mac and master-interface properties on reset;
*) wifi - enable creating virtual wifi interfaces using "copy-from" setting;
*) wifi - fixed packet receive when having multiple station interfaces;
*) wifi - fixed signal strength reporting during association (introduced in v7.15);
*) wifi - fixed typo in log message;
*) wifi - improve regulatory compliance for Chateau ax devices;
*) wifi - improved interface stability when receiving invalid FT authentication frames;
*) wifi - improved system stability after interface hang;
*) wifi - improved WPA3 PMKSA handling when access-lists with custom passphrases are used;
*) wifi - make sniffer tool return an error when attempting to sniff with a radio which does not support it;
*) wifi - send channel switch announcements to clients when switching channels at requested re-select intervals;
*) wifi - use name-format also for local interfaces when provisioning;
*) wifi-qcom - add spectral-scan and spectral-history tools (CLI only);
*) wifi-qcom-ac - count dropped packets to "tx-drop" instead of "tx-error";
*) wifi-qcom-ac - improved memory allocating process;
*) winbox - added "Import Router ID" parameter under "Routing/BGP/VPN" menu;
*) winbox - added "Switch/QoS" menu for CRS3xx, CRS5xx, CCR2116 and CCR2216 devices;
*) winbox - added "Trace" column under "System/History" menu;
*) winbox - added configuration settings for ROSE;
*) winbox - added extra "File System" under "Format Drive" button;
*) winbox - added missing "Default Name" property for interfaces;
*) winbox - do not show "Last Logged In" and "Expire Password" when creating new system user;
*) winbox - fixed "Authority" property under "System/Certificates/Requests" menu;
*) winbox - fixed duplicated "MVRP Attributes" table;
*) winbox - fixed false invalid flag under "System/Ports/Remote Access" menu;
*) winbox - fixed issue with skin file appearing as unknown in user group menu (introduced in v7.15);
*) winbox - fixed signal bar "excellent" tooltip;
*) winbox - fixed Switch menu for RB1100AHx4 device;
*) winbox - improved QR code display;
*) winbox - moved DHCPv6 Server "Allow Dual Stack Queue" property from General to Queues tab;
*) winbox - moved Switch menu tabs to individual menus;
*) winbox - properly display available address-pools for DHCPv6 server configuration;
*) winbox - removed deprecated x86/CHR specific settings under "System/Resources" menu;
*) winbox - removed spare argument for "PFS Group" property under "IP/IPsec/Proposals" menu;
*) winbox - renamed configurable wifi property "Tx Power" to "Max Tx Power";
*) winbox - separated different Watchdog settings into logical tabs;
*) winbox - use CAP serial number with "Set Identity" button under "WiFi/Remote CAP" menu;
*) winbox - use correct default value for "Partition Offset" property;
*) winbox/webfig - fixed skins (introduced in v7.15);
*) wireless - allow unsetting signal-range and ssid-regext properties for capsman access-list;
*) wireless - fixed dynamic VLAN assignments for vlan-filtering bridge in certain cases;
*) wireless - limit antenna-gain property to 100;
*) www - log out inactive REST API users;
*) x86 - added missing PCI ids for bnx2x driver;
*) x86 - added RTL8156 driver support;
*) x86 - fixed missing serial ports with MCS9900;
Αρκετές αλλαγές.
Στο δικό μου conf
έκανε rename τις μπάντες των wifi (από wlan1 > 5, wlan2 > 2.4 σε wlan1 > 2.4, wlan2 > 5).
xristostsilis
24-09-24, 19:28
τρελάθηκε εμένα σήμερα το chateau που έχω να το ενημερώσω από τον πόλεμο και ενώ ήταν συνδεδεμένο με cosmote 5g (nsa) δεν είχε ιντερνετ.... Επί τη ευκαιρία του πέρασα την τελευταία 7,16 και έκανα και modem upgrade στο τελευταίο 5G update που τελειώνει σε 03 (είχα το 01). Τρέχει οκ αν θέλει κανένας να την κάνει εγώ τόσο καιρό το επεφευγα γιατί στα mt είναι λίγο περιεργα τα updates.
- - - Updated - - -
με restart πριν την ενημέρωση είχε στρώσει εντωμεταξύ. αυτό έχω παρατηρήσει το κάνει ανά τρίμηνο περίπου χωρίς restart
*) wifi - use name-format also for local interfaces when provisioning;
Αν είναι αυτό που νομίζω τότε μάλλον έλαβαν υπόψιν το request μου.
Winbox 4
What's new in v4.0beta8:
- Make font darker for light mode
- Improve font rendering in windows multiline text widget
- Change selected text color for multiline text widget
What's new in v4.0beta7:
- Some error messages were not shown
- Properly sort dropdown items
- Some default values did not match console defaults
- Activate opened subwindow tab in views where subwindow opened from form
- Better handle workspace names with special characters
- Improve performance when selecting large number of rows
- Improve performance for tables where data is auto refreshed
- Change text selection color
- Focus on the first input field when opening a subwindow form
- Select all text when changing fields with Tab
- Add submitting forms with Enter key
- Fix bottom frame border
- Fix missing WiFi icon
- Fix some buttons in form windows (e.g. Renew CHR License)
- Fix black screen on some Linux distros (e.g. Ubuntu 20.04.6)
Winbox 4
What's new in v4.0beta8:
- Make font darker for light mode
- Improve font rendering in windows multiline text widget
- Change selected text color for multiline text widget
What's new in v4.0beta7:
- Some error messages were not shown
- Properly sort dropdown items
- Some default values did not match console defaults
- Activate opened subwindow tab in views where subwindow opened from form
- Better handle workspace names with special characters
- Improve performance when selecting large number of rows
- Improve performance for tables where data is auto refreshed
- Change text selection color
- Focus on the first input field when opening a subwindow form
- Select all text when changing fields with Tab
- Add submitting forms with Enter key
- Fix bottom frame border
- Fix missing WiFi icon
- Fix some buttons in form windows (e.g. Renew CHR License)
- Fix black screen on some Linux distros (e.g. Ubuntu 20.04.6)
Η μία ΒΕΤΑ πίσω από την άλλη.
Newsletter #120 | September 2024 (https://mt.lv/news120)
Στην 7.16 απο οτι ειδα σκισανε το mdns responder και το dhcp server ipv6 σε static leases ............... ετσι για την ιστορια.
Κουραγιο παιδες.... !!!!!!
Winbox
What's new in v4.0beta9:
- return ESC shortcut to close sub windows
- add support for Groups for Saved router list in Login window
- add support to import Saved address list .cdb file (NOTE: old .wbx file type is deprecated. This means exported WinBox 3 file won't work, use .cdb file).
- add support for opening (changing database path) Saved address lists in login view
- fix crash when restoring workspace where opened object's id has changed its type
- Login window improved layout of saving password versus remembering last used password
- restore comment field text in Login view when reopening window
- store selected Workspace for Saved routers, and restore when selecting (in Login view)
- make form background a little bit lighter in light mode
What's new in 7.16.1 (2024-Oct-10 17:03):
*) defconf - changed wireless installation from "indoor" to "any";
*) defconf - disable 5GHz secondary channel on RB4011;
*) dns - do not look up local cache when executing ":resolve" command with specified "server" parameter (introduced in v7.16);
*) sfp - improved initialization for certain SFP modules on CRS309 and CRS317 devices ("/system routerboard upgrade" required);
What's new in 7.16.1 (2024-Oct-10 17:03):
*) defconf - changed wireless installation from "indoor" to "any";
*) defconf - disable 5GHz secondary channel on RB4011;
*) dns - do not look up local cache when executing ":resolve" command with specified "server" parameter (introduced in v7.16);
*) sfp - improved initialization for certain SFP modules on CRS309 and CRS317 devices ("/system routerboard upgrade" required);
λολ...... για πιο λογο? Εγω επειδη το εχω δοκιμασει, δουλευει πολυ καλυτερα με secondary.
λολ...... για πιο λογο? Εγω επειδη το εχω δοκιμασει, δουλευει πολυ καλυτερα με secondary.
Από το defconf το έχουν disable.
Δεν το αφαίρεσαν σαν δυνατότητα.
Δουλευει καλα? Εγω μολις μπηκα σπιτι τη περασα στο lte, αλλα εχω αργο browsing. Δε ξερω πριν. Μπορει να ειναι και συμπτωση περιοχης βεβαια.......
Δουλευει καλα? Εγω μολις μπηκα σπιτι τη περασα στο lte, αλλα εχω αργο browsing. Δε ξερω πριν. Μπορει να ειναι και συμπτωση περιοχης βεβαια.......
Δεν έχω κάποιο θέμα.
Δεν είχε αλλαγές που να τις χρησιμοποιώ και να με επηρεάσουν σε κάτι.
Οχι....... τελικα εχουν κανει μαλακια με τους dns. Αν δε βαλω DNS responder=bridge, δε μου ανοιγει καν σελιδες σε LTE.
Πηγαν να φτιαξουν να μη το τραβαει απο το dns cache και του @@μησανε τη μαμα.
Καλημερα, συνηθως φτιαχνονται στις χ.χ.3 τα προβληματακια αυτα.
Σε 2 Μικροτικ αναγκαστικα εβαλα την 7.16 και δεν τα πειραζω μεχρι να δω 7.16.3 και να διαβασω οτι παει καλα.
Ειμαι ευχαριστημενος με την 7.15.3 σε γενικες γραμμες εκτος ενος προβληματος που καπου καπου μου βγαζει σφαλμα στην εκτελεση ενος σκριπτ.
Η τελευταια μου εκδοση χωρις το παραμικρο προβλημα ηταν η 7.14.3 αν θυμαμαι καλα.
Νομιζω ο χαμος θα γινει στην 7.17 αν δεν αλλαξει κατι μεχρι τοτε.
@Macro
Στο lte σου βγαζει περιστασιακα μηπως το παρακατω error με την 7.16?
lte1 mbim: packet service: detached data class: 0, nwe: 27
lte1 mbim: register state: denied, gsm operator: 20201, COSMOTE, nwe: 27
Οχι δεν εχω καποιο error, δεν εχω το 5g αλλα το lte18.
Καλησπερα Κυριοι. Τις τελευταιες δυο ημερες κολλαει το συμπαν σε chateau lte 12. Καταφερνω να το «ξεκολλησω» κανοντας ενα speedtest... Ειλικρινα δεν ξερω τι εχει γινει, ετρεχε μπομπα τοσο καιρο. Εχω πανω 7.12beta7. Συγγνωμη, αλλα δεν εχω πολλες γνωσεις αναφορικα με την ορολογια κτλ, αλλα προτιθεμαι να κανω οτι χρειαζεται. Ευχαριστω εκ των προτερων.
Καλησπερα Κυριοι. Τις τελευταιες δυο ημερες κολλαει το συμπαν σε chateau lte 12. Καταφερνω να το «ξεκολλησω» κανοντας ενα speedtest... Ειλικρινα δεν ξερω τι εχει γινει, ετρεχε μπομπα τοσο καιρο. Εχω πανω 7.12beta7. Συγγνωμη, αλλα δεν εχω πολλες γνωσεις αναφορικα με την ορολογια κτλ, αλλα προτιθεμαι να κανω οτι χρειαζεται. Ευχαριστω εκ των προτερων.
Αρχικά άνοιξε νέο θέμα για να τα πούμε εκεί.
Εδώ μιλάμε γενικά για το ros.
Αρχικά άνοιξε νέο θέμα για να τα πούμε εκεί.
Εδώ μιλάμε γενικά για το ros.
Ειπα να το αναφερω, γιατι ειδα καποια θεματα με browsing etc και πιστεψα μην ειναι κατι related. Επειδη θα παω σε μια υποχρεωση σε λιγο, πως θες να ειναι ο τιτλος του θεματος; Ρωταω σε περιπτωση που ειναι να βοηθησει και αλλους.
Ειπα να το αναφερω, γιατι ειδα καποια θεματα με browsing etc και πιστεψα μην ειναι κατι related. Επειδη θα παω σε μια υποχρεωση σε λιγο, πως θες να ειναι ο τιτλος του θεματος; Ρωταω σε περιπτωση που ειναι να βοηθησει και αλλους.
Υπάρχει και θέμα για το chateau.
Μπορείς να το γράψεις εκεί.
Για να μη σας εχω με το αγχος, προβλημα της περιοχης με browsing ηταν σε μενα. Τωρα που εστρωσαν ολα, μου φαινεται να δουλευει καλα.
Υπαρχει κανενας οδηγος για να κλειδωσω enb στο chateau 5g ax?
γιατι ξαφνικα με πεταει σε αλλη κεραια και σερνεται
Υπάρχει σχετικό θέμα (https://www.adslgr.com/forum/threads/1216342-%CE%9F%CE%94%CE%97%CE%93%CE%9F%CE%A3-Mikrotik-Chateau-LTE12-%CE%9A%CE%BB%CE%B5%CE%AF%CE%B4%CF%89%CE%BC%CE%B1-Cell)
x_undefined
27-10-24, 12:35
Σας άλλαξε κανονικά η ώρα στο RouterOS; Εμένα (v7.16) εξακολουθεί να νομίζει ότι το timezone μας είναι ακόμα σε DST και δείχνει +1 ώρα.
259517
EDIT: Απενεργοποιώντας το "Time Zone Autodetect" έφτιαξε.
Σας άλλαξε κανονικά η ώρα στο RouterOS; Εμένα εξακολουθεί να νομίζει ότι το timezone μας είναι ακόμα σε DST και δείχνει +1 ώρα.
259517
Ναι κανονικά σε εμένα.
- - - Updated - - -
Στο ntp client ποιους έχεις δηλωμένους;
x_undefined
27-10-24, 12:46
Στο ntp client ποιους έχεις δηλωμένους;
Δοκίμασα με gr.pool.ntp.org και ntp.grnet.gr. Έκανα edit και παραπάνω ότι έφτιαξε τελικά. Αλλά μου φαίνεται περίεργο γιατί δεν το είχε ξανακάνει και θυμάμαι να δούλευε σωστά το Autodetect.
Σας άλλαξε κανονικά η ώρα στο RouterOS; Εμένα (v7.16) εξακολουθεί να νομίζει ότι το timezone μας είναι ακόμα σε DST και δείχνει +1 ώρα.
259517
EDIT: Απενεργοποιώντας το "Time Zone Autodetect" έφτιαξε.
Και σε εμένα το ίδιο έκανε ένα που κοίταξα...
To time zone autodetect το έχω ενεργοποιημένο και μου δούλεψε χωρίς πρόβλημα.
Στις ρυθμίσεις έχω αυτό:
System > NTP Client
Enabled
Mode: unicast
Primary NTP Server: 193.239.214.226
Secondary NTP Server: 194.177.210.54
x_undefined
27-10-24, 17:12
Έχεις ενεργοποιημένη την επιλογή "Update Time" στο IP Cloud;
Έχεις ενεργοποιημένη την επιλογή "Update Time" στο IP Cloud;
Ναι......
Εδω και καποιες μερες οταν γυρναω σπιτι παρατηρω το Chateau 5G να αναβοσβηνει κοκκινο το λαμπακι του internet και να μην εχω ιντερνετ. πρεπει να κανω disable-enable το interface lte1 για να στρωσει.
Υπαρχει κατι/καπως που μπορω να δω Logs?
Εδω και καποιες μερες οταν γυρναω σπιτι παρατηρω το Chateau 5G να αναβοσβηνει κοκκινο το λαμπακι του internet και να μην εχω ιντερνετ. πρεπει να κανω disable-enable το interface lte1 για να στρωσει.
Υπαρχει κατι/καπως που μπορω να δω Logs?
Εννοείς ότι σου ρίχνει την σύνδεση αλλά δεν εμφανίζεται καταγραφή στα logs;
Πάνε system > logging και πρόσθεσε το lte.
Ειναι συχνο φαινομενο.
Διαβασε εδω (https://www.adslgr.com/forum/threads/1122673-Mikrotik-RouterOS-v7-beta?p=7654155#post7654155) και κανε οτι λεμε στα παραπανω μηνυματα.
Αν δεν το κατεχεις μη κανεις τιποτε.
xristostsilis
20-11-24, 12:45
Ειναι συχνο φαινομενο.
Διαβασε εδω (https://www.adslgr.com/forum/threads/1122673-Mikrotik-RouterOS-v7-beta?p=7654155#post7654155) και κανε οτι λεμε στα παραπανω μηνυματα.
Αν δεν το κατεχεις μη κανεις τιποτε.
Ειχε και ένας φίλος το ίδιο θέμα ακριβώς μόλις μετακόμισε από Πάτρα σε Αθήνα. Δεν έβγαζε άκρη και έκανε συνεχώς επανεκκινήσεις κλπ. Δια μαγείας λύθηκε όταν μετακόμισε σε άλλο σπίτι πάλι στην Αθήνα
- - - Updated - - -
Θέλω να πω ότι παίζει να έφταιγε και η κεραία σε συνδυασμό με modem FW
What's new in 7.16.2 (2024-Nov-26 14:09):
*) certificate - do not download CRL if there is not enough free RAM;
*) certificate - fixed handling of capsman-cap certificates (introduced in v7.16);
*) dhcpv4-server/relay - added additional error messages for DHCP servers and relays;
*) dns - fixed lookup order for static DNS entries (introduced in v7.16.1);
*) ethernet - improved linking after reboot for hAP ax lite devices ("/system routerboard upgrade" required);
*) gps - changed default GPS antenna setting for LtAP mini with internal LTE/GPS combo antenna;
*) leds - fixed bogus argument for "leds" property (introduced in v7.16);
*) leds - fixed PoE-in LEDs for CRS318-1Fi-15Fr-2S device;
*) modem - KNOT BG77 modem, improved handling of modem unexpected restarts;
*) route - fixed possible issue with inactive routes after reboot (introduced in v7.16);
*) routerboot - improved stability for IPQ8072 and IPQ6010 when flash-boot is used ("/system routerboard upgrade" required);
Κι απ οτι φαινεται παμε για την 7.17 με προσοχη
Κι απ οτι φαινεται παμε για την 7.17 με προσοχη
Θα διαψευστείς...
Βασικα να κι αν παμε να κι αν δεν παμε σε 7.17 ή 7.18 κλπ
Ας φτιαξουν σωστη εκδοση και ας παμε και οπου θελουν.
Μαντης δεν ειμαι αλλα κι εξω να πεσω τι θα παθω?
Τζαμπα μαγκας ειμαι χαχχαχα
Ας φτιαξουν σωστη εκδοση και ας παμε και οπου θελουν.
Μια χαρά είναι οι εκδόσεις τους.
Ναι ναι γι αυτο βγαζουν νεες καθε τοσο
@ ADSLgr.com All rights reserved.