Αναζήτηση:

Αυτες ειναι οι οδηγιες για να λειτουργησει η αναγνωριση κλησεων;

Η πιο προσφατη εκδοση του module ειναι αυτη που αναφερεται στο ποστ 84 που βγηκε το 2018; Δεν υπαρχει πιο προσφατη και ενημερωμενη;
Ευχαριστω!

Νομιζω τιποτα απο αυτα που αναφερεις δε γινονται στο fritz. Απο αυτα μονο η αναγνωριση κλησεων θα ηταν χρησιμη για μενα. Θα το κοιταξω. Ευχαριστω!

Σκεφτομαι να καταργησω το freepbx που εχω και να δοκιμασω να χρησιμοποιησω το fritzbox 7590 ως τηλεφωνικο κεντρο αφου δε χρησιμοποιω καποια ιδιαιτερη λειτουργια του freepbx και νομιζω οτι το fritzbox θα με καλυπτει με ερωτηματικο το blind transfer που παλια δεν υποστηριζονταν.
Υπαρχει καποιο link για ρυθμισεις για cosmote; Η βασικη ερωτηση ειναι τι επιλεγω στο Enter Telephone Number/Telephony provider;

Επισης οι κωδικοι SIP Cosmote που εχω απο παλια περασμενους στο freepbx ισχυουν;

Ευχαριστω!

Ολα ενταξει, ευχαριστω πολυ!

Τι εννοεις χωρις το Speedport?

Τι Modem βαζεις?
OpenWrt σε Raspberry

Οταν συνδεω απο LAN του Speedport plus στη WAN του Openwrt και τα 2 συνδεονται με τις ρυθμισεις που αναφερω παραπανω με 2 ξεχωριστες pppoe συνδεσεις.
Αν συνδεσω το ONT απευθειας στη WAN του Openwrt και οχι μεσω του Speedport, δε συνδεεται.

- - - Updated - - -

Προσθεσα το
option device 'wan.835'

στις ρυθμισεις WAN και εχασα εντελως επαφη, δε συνδεομουν ουτε με ip, ουτε με ssh. Οποτε εκανα restore ενα backup που ειχα..

Εχω αυτες τις ρυθμισεις ειτε ειναι πισω απο το Speedport, ειτε προσπαθω χωρις το Speedport. Δοκιμασα και αλλες ρυθμισεις, αλλα οτι και αν δοκιμασα δεν πετυχε. Ευχαριστω!

~# cat /etc/config/network

config interface 'loopback'
option device 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'

config globals 'globals'
option ula_prefix 'fd3a:22be:bc8f::/48'

config interface 'lan'
option proto 'static'
option netmask '255.255.255.0'
option ip6assign '60'
option ipaddr '192.168.1.1'
option device 'br-lan'

config interface 'wan'
option device 'eth1'
option proto 'pppoe'
option username 'ΧΧΧΧΧΧ@ΧΧΧ.ΧΧΧ'
option password 'ΧΧΧΧΧΧΧΧ'
option ipv6 'auto'
option peerdns '0'
list dns '9.9.9.9'
list dns '149.112.112.112'

config interface 'Cosmote_Modem'
option proto 'static'
option device 'eth1'
option ipaddr '192.168.0.2'
option netmask '255.255.255.0'

Οταν συνδεω Raspberry pi με OpenWrt πισω απο Speedport με pppoe passthrough, συνδεονται και τα 2 ξεχωριστα χωρις κανενα προβλημα.
Οταν δοκιμασα να συνδεσω το καλωδιο ethernet απ' ευθειας στο Raspberry pi/OpenWrt δε συνδεθηκε. Υπαρχει καποια εξηγηση σε αυτο; Ειναι αναμενομενο;

Τοσο απλο ηταν; Ολη μερα τους παρακαλουσα να μου στειλουν τον κωδικο, μου εστειλαν τελικα την αιτηση για να τη στειλω υπογεγραμμενη, αλλα ημουν εξω και επρεπε να βρω εκτυπωτη και σκανερ, την εστειλα και μου εστειλαν τελικα τον κωδικο, ομως ημουν παλι εξω και ευτυχως προλαβα να το κανω με απομακρυσμενη συνδεση απο το κινητο...

Delete

Οχι, εστειλα email, μου εστειλαν εντυπο να υπογραψω και να στειλω πισω και μετα με sms τον κωδικο.

Τους πηρα απο Cosmote πριν διαβασω το παραπανω μυνημα και τελικα αυτο ηταν το προβλημα.. Θα μπορουσε να μου το πει καποιος απο τους τεχνικους ποθ μιλησα..
Σε ποιο αρχειο βρισκουμε τον κωδικο SIP;

Η IP ειναι 94.69.Χ.ΧΧ
Σε ευχαριστω.
Ζητησα κωδικους SIP μηπως αλλαξαν με την αλλαγη γραμμης σε οπτικες ινες. Συμβαινει αυτο;

Το router ειναι το ιδιο, το Fritz 7590.
Η μονη διαφορα ειναι οι οπτικες ινες και ο Wizard που ετρεξε για να συνδεθει εκ νεου με Cosmote.
Οι συσκευες ειναι registered, ομως οταν με καλουν φαινεται σα να χτυπαει το τηλεφωνο, αλλα δε χτυπαει και εγω δεν μπορω να καλεσω.
Στο Fritz απενεργοποιησα στο Telephony>Telephone numbers το

30ΧΧΧΧΧΧΧΧΧΧ Internet ims.otenet.gr*

Στο Freepbx τα log ειναι:

SIP Cosmote ONLINE 0
PJSIP 31 ONLINE 0
PJSIP 32 ONLINE 0
PJSIP 33 ONLINE 0
PJSIP 34 ONLINE 0
PJSIP 35 ONLINE 0
PJSIP anonymous OFFLINE 0

PJSIP

Endpoint:
I/OAuth:
Aor:
Contact:
Transport:
Identify:
Match:
Channel:
Exten: CLCID:
==========================================================================================

Endpoint: 31/31 Not in use 0 of inf
InAuth: 31-auth/31
Aor: 31 1
Contact: 31/sip:31@192.168.1.10:5060 9bdbb20f63 Avail 5.165

Endpoint: 32/32 Not in use 0 of inf
InAuth: 32-auth/32
Aor: 32 1
Contact: 32/sip:32@192.168.1.11:5060 72b01904bf Avail 8.320

Endpoint: 33/33 Not in use 0 of inf
InAuth: 33-auth/33
Aor: 33 1
Contact: 33/sip:33@192.168.1.1:5060;uniq=C4A4C19989 94834998e0 Avail 8.735

Endpoint: 34/34 Not in use 0 of inf
InAuth: 34-auth/34
Aor: 34 1
Contact: 34/sip:34@192.168.1.1:5060;uniq=C4A4C19989 b5a75d0b30 Avail 6.309

Endpoint: 35/35 Not in use 0 of inf
InAuth: 35-auth/35
Aor: 35 1
Contact: 35/sip:35@192.168.1.13:5060 f13e061461 Avail 10.171

Endpoint: anonymous Unavailable 0 of inf


Objects found: 6

CHANSIP
Name/username Host Dyn Forcerport Comedia ACL Port Status Description
Cosmote/+30ΧΧΧΧΧΧΧΧΧΧ 195.167.16.28 Yes Yes 5060 OK (15 ms)
1 sip peers

Ευχαριστω!

Delete

Σημερα ο ΟΤΕ συνδεσε οπτικες ινες και ο τεχνικος δεν μπορεσε να κανει το 7590 να συνδεθει, ενω μεχρι πριν τις οπτικες ινες συνδεοταν κανονικα.
Παιζει με οπτικες ινες; Χρειαζεται καποια ειδικη ρυθμιση; Το καλωδιο το συνδεουμε στη θυρα WAN η στη θυρα DSL; Τα δοκιμασα και τα 2 χωρις επιτυχια.

Ευχαριστω πολυ, ομως δεν απανταει αν πρεπει να εχω στο Speedport το ΝΑΤ On εφοσων το ρουτερ αυτο χρησιμοποιειται μονο για τηλεφωνια. Ολα τα κανει το 2ο ρουτερ που συνδεεται επισης με pppoe.

Σε τετοια συνδεση το pppoe passthrough και το ΝΑΤ στο ρουτερ του ΟΤΕ ειναι στο On;
(και τα 2 ρουτερ μου συνδεονται ξεχωριστα με pppoe)

Προσπαθω απο το υποδικτυο του 2ου ρουτερ να μπω στη σελιδα του ISP ρουτερ αλλα δοκιμασα με ΝΑΤ στο 2ο ρουτερ και δεν πετυχε. Προφανως δεν το εκανα σωστα..

Το option ipaddr '192.168.178.5' τι ειναι;
Τι ακριβως ρυθμισεις εβαλες στο ΝΑΤ;
Το interface 'lan' εμφανιζεται στο Status/Overview;

Ευχαριστω!

Εκανα τη WAN συνδεση στο 2ο router PPPoE αντι DHCP Client η Static IP που ηταν. Νομιζω ειναι καλυτερα. Χρειαζεται καποια διορθωση;
Οποτε τωρα ειναι:

Speedport plus:
IP 192.168.0.1
DHCP Off
Firewall on
PPPoE pass-through On
ΝΑΤ On
Χρησιμευει μονο για τηλεφωνια

2o router (Raspberry pi 4/OpenWrt)
WAN interface: PPPoE
Απο LAN του Speedport καλωδιο σε WAN του 2oυ router
DHCP On
Firewall default ρυθμισεις
Ολες οι συσκευες ειναι σε αυτο το router

LAN interface
IP 192.168.1.1
IPv4 gateway κενο

ethernet

δωσε στο OpenWRT ενα pppoe μεσα απο το ethernet port που βλεπεις το Speedport. πανω εκει κανε ΝΑΤ. Αυτο το setup εχω

Σε ευχαριστω!
Το OpenWrt ειναι σε Raspberry pi 4. Νομιζω δεν μπορω να δωσω pppoe απο αυτο..

Εχω κανει τα εξης:
Speedport plus:
IP 192.168.0.1
DHCP Off
Firewall on (δεν απενεργοποιειται, δεν υπαρχει ρυθμιση)
PPPoE pass-through On
ΝΑΤ On
Ορισα DNS Servers
Ορισα στατικη IP για το 2ο 192.168.0.2

2o router που δεν εχει δυνατοτητα συνδεσης DSL (OpenWrt)
IP 192.168.1.1
Απο LAN του Speedport καλωδιο σε WAN του 2oυ router
Gateway και DNS -> 192.168.0.1
DHCP On
Firewall default ρυθμισεις
Ολες οι συσκευες ειναι σε αυτο το router

Μεχρι στιγμης δε βλεπω καποιο προβλημα, θα ηθελα ομως τη γνωμη σας αν οσα εκανα ειναι σωστα και αν θα μπορουσα να βελτιωσω κατι.

Ευχαριστω!!

Νομιζω θα συνεχισω να χρησιμοποιω το ρουτερ του ΟΤΕ, δεν υπαρχει λογος να μπλεξω σε αυτη τη διαδικασια. Σε ευχαριστω πολυ!!

Ξερουμε αν το Asus RT-N66U με dd-wrt η και χωρις αν χρειαζεται μπορει να παιξει πισω απο το Speedport;
Μου εδωσαν να βαλω καποιες τιμες σε VPI, VCI, VLAN, Enscapulation που προς το παρον δεν τα βρισκω.

Δε με ενδιαφερει να εχει δικη του συνδεση, μου αρκει να εχω τηλεφωνο και ιντερνετ και να χρησιμοποιω τη 2η συσκευη σα ρουτερ. Οπως παλια που χρησιμοποιουσαμε bridge στο μοντεμ/ρουτερ.
Ευχαριστω!

Ας ανακεφαλαιωσω:
Το
Η IP του Speedport 192.168.1.1 οπως ειναι. Και δεν πειραζω καμια ρυθμιση. Ουτε χρησιμοποιω αλλη θυρα περα απο αυτη που θα παει στο Asus (αλλα αν θελω μπορω να χρησιμοποιησω και αλλες θυρες του Speedport).
Στο Asus επιλεγω PPPoE και βαζω IP πχ 192.168.1.5 η 192.168.2.1 αν θελω να ειναι σε αλλο υποδικτυο, και βαζω gateway και dns 192.168.1.1

Σε ευχαριστω!

Θα ηθελα στο Speedport να συνδεσω ενα router Asus και να χρησιμοποιω το Speedport μονο για να δεχεται τα καλωδια ιντερνετ και τηλεφωνιας και να εχει τους κωδικους.

Στο Speedport ειναι ηδη ενεργοποιημενη η επιλογη PPPoE Pass-through. Οποτε δεν κανω τιποτα; Απλα βαζω σε μια θυρα LAN το Asus;

Αν κανω δοκιμες και σβηστουν οι κωδικοι το Speedport τους παιρνει αυτοματα;
Γιατι νομιζω οτι δεν τους θυμαμαι.

Μπορει το FreePBX να βλεπει το Contact Manager και απο εκει σε μια εισερχομενη κληση να προβαλλεται το ονομα που εχω καταχωρησει και οχι μονο ο αριθμος τηλεφωνου; Προσπαθησα να το κανω χωρις επιτυχια..
Ευχαριστω!

delete

delete

Απο εχθες 3 φορες δεν ειχα τηλεφωνο, δηλ. δεν μπορω να καλεσω, ουτε να με καλεσουν. Οταν συμβαινει αυτο, εχω internet και οι γραμμες ειναι registered. Σε αυτο το διαστημα στο CDR Reports δεν καταγραφονται κλησεις. Με επανεκκινηση του μηχανηματος που εχει το freepbx επανερχονται. Καποια ιδεα;
Εδω το log:

VERBOSE pbx_builtins.c: Goto (ext-group,1,18)
VERBOSE pbx.c: Executing Macro("SIP/Cosmote-00000077", "dial,120,HhTtr,31-32-33") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/Cosmote-00000077", "Blind Transfer: , Attended Transfer: , User: , Alert Info: ") in new stack
VERBOSE pbx.c: Executing Set("SIP/Cosmote-00000077", "__CRM_SOURCE=6932196932") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/Cosmote-00000077", "0?Set(ALERT_INFO=)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/Cosmote-00000077", "0?Set(ALERT_INFO=)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/Cosmote-00000077", "0?Set(ALERT_INFO=)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/Cosmote-00000077", "0?Set(CHANNEL(musicclass)=)") in new stack
VERBOSE pbx.c: Executing AGI("SIP/Cosmote-00000077", "dialparties.agi") in new stack
VERBOSE res_agi.c: Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
VERBOSE res_agi.c: dialparties.agi: Starting New Dialparties.agi
VERBOSE res_agi.c: dialparties.agi: Caller ID name is '6932196932' number is '6932196932'
VERBOSE res_agi.c: dialparties.agi: CW Ignore is:
VERBOSE res_agi.c: dialparties.agi: CF Ignore is:
VERBOSE res_agi.c: dialparties.agi: CW IN_USE/BUSY is: 1
VERBOSE res_agi.c: dialparties.agi: Methodology of ring is 'ringall'
VERBOSE res_agi.c: dialparties.agi: Added extension 31 to extension map
VERBOSE res_agi.c: dialparties.agi: Added extension 32 to extension map
VERBOSE res_agi.c: dialparties.agi: Added extension 33 to extension map
VERBOSE res_agi.c: dialparties.agi: Extension 31 cf is disabled
VERBOSE res_agi.c: dialparties.agi: Extension 32 cf is disabled
VERBOSE res_agi.c: dialparties.agi: Extension 33 cf is disabled
VERBOSE res_agi.c: dialparties.agi: Extension 31 do not disturb is disabled
VERBOSE res_agi.c: dialparties.agi: Extension 32 do not disturb is disabled
VERBOSE res_agi.c: dialparties.agi: Extension 33 do not disturb is disabled
VERBOSE res_agi.c: dialparties.agi: dbset CALLTRACE/31 to 6932196932
VERBOSE res_agi.c: dialparties.agi: dbset CALLTRACE/32 to 6932196932
VERBOSE res_agi.c: dialparties.agi: dbset CALLTRACE/33 to 6932196932
VERBOSE res_agi.c: dialparties.agi: Filtered ARG3: 31-32-33
VERBOSE res_agi.c: dialparties.agi: RVOL_MODE ''
VERBOSE res_agi.c: dialparties.agi: RVOL is:
VERBOSE res_agi.c: dialparties.agi: RVOLPARENT is:
VERBOSE res_agi.c: AGI Script dialparties.agi completed, returning 0
VERBOSE pbx.c: Executing NoOp("SIP/Cosmote-00000077", "Returned from dialparties with groups to dial") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/Cosmote-00000077", "ringall array ") in new stack
VERBOSE pbx.c: Executing Set("SIP/Cosmote-00000077", "__FMGL_DIAL=") in new stack
VERBOSE pbx.c: Executing Set("SIP/Cosmote-00000077", "LOOPCNT=3") in new stack
VERBOSE pbx.c: Executing Set("SIP/Cosmote-00000077", "ITER=1") in new stack
VERBOSE pbx.c: Executing Set("SIP/Cosmote-00000077", "__EXTTOCALL=31") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/Cosmote-00000077", "Working with 31") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/Cosmote-00000077", "0?Set(HASH(__SIPHEADERS,Alert-Info)=Normal;volume=)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/Cosmote-00000077", "0?Set(HASH(__SIPHEADERS,Alert-Info)=Normal;volume=)") in new stack
VERBOSE pbx.c: Executing Set("SIP/Cosmote-00000077", "ITER=2") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/Cosmote-00000077", "1?ndloopbegin") in new stack
VERBOSE pbx_builtins.c: Goto (macro-dial,s,15)
VERBOSE pbx.c: Executing Set("SIP/Cosmote-00000077", "__EXTTOCALL=32") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/Cosmote-00000077", "Working with 32") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/Cosmote-00000077", "0?Set(HASH(__SIPHEADERS,Alert-Info)=Normal;volume=)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/Cosmote-00000077", "0?Set(HASH(__SIPHEADERS,Alert-Info)=Normal;volume=)") in new stack
VERBOSE pbx.c: Executing Set("SIP/Cosmote-00000077", "ITER=3") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/Cosmote-00000077", "1?ndloopbegin") in new stack
VERBOSE pbx_builtins.c: Goto (macro-dial,s,15)
VERBOSE pbx.c: Executing Set("SIP/Cosmote-00000077", "__EXTTOCALL=33") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/Cosmote-00000077", "Working with 33") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/Cosmote-00000077", "0?Set(HASH(__SIPHEADERS,Alert-Info)=Normal;volume=)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/Cosmote-00000077", "0?Set(HASH(__SIPHEADERS,Alert-Info)=Normal;volume=)") in new stack
VERBOSE pbx.c: Executing Set("SIP/Cosmote-00000077", "ITER=4") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/Cosmote-00000077", "0?ndloopbegin") in new stack
VERBOSE pbx.c: Executing Macro("SIP/Cosmote-00000077", "dial-ringall-predial-hook,") in new stack
VERBOSE pbx.c: Executing MacroExit("SIP/Cosmote-00000077", "") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/Cosmote-00000077", "0?Set(ds=SIP/31&SIP/32&SIP/33,120,HhtrM(auto-blkvm)g)") in new stack
VERBOSE pbx.c: Executing Dial("SIP/Cosmote-00000077", "SIP/31&SIP/32&SIP/33,120,HhtrM(auto-blkvm)b(func-apply-sipheaders^s^1),") in new stack
VERBOSE netsock2.c: Using SIP RTP TOS bits 184
VERBOSE netsock2.c: Using SIP RTP CoS mark 5
VERBOSE netsock2.c: Using SIP RTP TOS bits 184
VERBOSE netsock2.c: Using SIP RTP CoS mark 5
VERBOSE netsock2.c: Using SIP RTP TOS bits 184
VERBOSE netsock2.c: Using SIP RTP CoS mark 5
VERBOSE app_stack.c: SIP/31-00000078 Internal Gosub(func-apply-sipheaders,s,1) start
VERBOSE pbx.c: Executing ExecIf("SIP/31-00000078", "1?Set(CHANNEL(hangup_handler_push)=crm-hangup,s,1)") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/31-00000078", "Applying SIP Headers to channel SIP/31-00000078") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-00000078", "TECH=SIP") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-00000078", "SIPHEADERKEYS=") in new stack
VERBOSE pbx.c: Executing While("SIP/31-00000078", "0") in new stack
VERBOSE app_while.c: Jumping to priority 12
VERBOSE pbx.c: Executing Return("SIP/31-00000078", "") in new stack
VERBOSE app_stack.c: Spawn extension (from-internal, 1, 1) exited non-zero on 'SIP/31-00000078'
VERBOSE app_stack.c: SIP/31-00000078 Internal Gosub(func-apply-sipheaders,s,1) complete GOSUB_RETVAL=
VERBOSE app_stack.c: SIP/32-00000079 Internal Gosub(func-apply-sipheaders,s,1) start
VERBOSE pbx.c: Executing ExecIf("SIP/32-00000079", "1?Set(CHANNEL(hangup_handler_push)=crm-hangup,s,1)") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/32-00000079", "Applying SIP Headers to channel SIP/32-00000079") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-00000079", "TECH=SIP") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-00000079", "SIPHEADERKEYS=") in new stack
VERBOSE pbx.c: Executing While("SIP/32-00000079", "0") in new stack
VERBOSE app_while.c: Jumping to priority 12
VERBOSE pbx.c: Executing Return("SIP/32-00000079", "") in new stack
VERBOSE app_stack.c: Spawn extension (from-internal, 1, 1) exited non-zero on 'SIP/32-00000079'
VERBOSE app_stack.c: SIP/32-00000079 Internal Gosub(func-apply-sipheaders,s,1) complete GOSUB_RETVAL=
VERBOSE app_stack.c: SIP/33-0000007a Internal Gosub(func-apply-sipheaders,s,1) start
VERBOSE pbx.c: Executing ExecIf("SIP/33-0000007a", "1?Set(CHANNEL(hangup_handler_push)=crm-hangup,s,1)") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/33-0000007a", "Applying SIP Headers to channel SIP/33-0000007a") in new stack
VERBOSE pbx.c: Executing Set("SIP/33-0000007a", "TECH=SIP") in new stack
VERBOSE pbx.c: Executing Set("SIP/33-0000007a", "SIPHEADERKEYS=") in new stack
VERBOSE pbx.c: Executing While("SIP/33-0000007a", "0") in new stack
VERBOSE app_while.c: Jumping to priority 12
VERBOSE pbx.c: Executing Return("SIP/33-0000007a", "") in new stack
VERBOSE app_stack.c: Spawn extension (from-internal, 1, 1) exited non-zero on 'SIP/33-0000007a'
VERBOSE app_stack.c: SIP/33-0000007a Internal Gosub(func-apply-sipheaders,s,1) complete GOSUB_RETVAL=
VERBOSE app_dial.c: Called SIP/31
VERBOSE app_dial.c: Called SIP/32
VERBOSE app_dial.c: Called SIP/33
VERBOSE app_dial.c: SIP/33-0000007a connected line has changed. Saving it until answer for SIP/Cosmote-00000077
VERBOSE app_dial.c: SIP/32-00000079 connected line has changed. Saving it until answer for SIP/Cosmote-00000077
VERBOSE app_dial.c: SIP/31-00000078 connected line has changed. Saving it until answer for SIP/Cosmote-00000077
VERBOSE app_dial.c: SIP/33-0000007a is ringing
VERBOSE app_dial.c: SIP/32-00000079 is ringing
VERBOSE app_dial.c: SIP/31-00000078 is ringing
VERBOSE app_dial.c: SIP/Cosmote-00000076 is ringing
VERBOSE app_dial.c: SIP/Cosmote-00000076 is ringing
VERBOSE app_dial.c: SIP/Cosmote-00000076 answered SIP/31-00000075
VERBOSE bridge_channel.c: Channel SIP/Cosmote-00000076 joined 'simple_bridge' basic-bridge
VERBOSE bridge_channel.c: Channel SIP/31-00000075 joined 'simple_bridge' basic-bridge
VERBOSE chan_sip.c: Got SIP response 486 "Busy Here" back from 192.168.1.10:5160
VERBOSE app_dial.c: SIP/31-00000078 is busy
VERBOSE app_stack.c: SIP/31-00000078 Internal Gosub(crm-hangup,s,1) start
VERBOSE pbx.c: Executing NoOp("SIP/31-00000078", "Sending Hangup to CRM") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/31-00000078", "HANGUP CAUSE: 17") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-00000078", "0?Set(__CRM_VOICEMAIL=)") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/31-00000078", "MASTER CHANNEL: 1566551870.120 = 1566551869.119") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-00000078", "1?return") in new stack
VERBOSE pbx_builtins.c: Goto (crm-hangup,s,8)
VERBOSE pbx.c: Executing Return("SIP/31-00000078", "") in new stack
VERBOSE app_stack.c: Spawn extension (from-internal, 1, 1) exited non-zero on 'SIP/31-00000078'
VERBOSE app_stack.c: SIP/31-00000078 Internal Gosub(crm-hangup,s,1) complete GOSUB_RETVAL=
VERBOSE app_stack.c: SIP/32-00000079 Internal Gosub(crm-hangup,s,1) start
VERBOSE pbx.c: Executing NoOp("SIP/32-00000079", "Sending Hangup to CRM") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/32-00000079", "HANGUP CAUSE: 16") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/32-00000079", "0?Set(__CRM_VOICEMAIL=)") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/32-00000079", "MASTER CHANNEL: 1566551870.121 = 1566551869.119") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/32-00000079", "1?return") in new stack
VERBOSE pbx_builtins.c: Goto (crm-hangup,s,8)
VERBOSE pbx.c: Executing Return("SIP/32-00000079", "") in new stack
VERBOSE app_stack.c: Spawn extension (from-internal, 1, 1) exited non-zero on 'SIP/32-00000079'
VERBOSE app_stack.c: SIP/32-00000079 Internal Gosub(crm-hangup,s,1) complete GOSUB_RETVAL=
VERBOSE app_stack.c: SIP/33-0000007a Internal Gosub(crm-hangup,s,1) start
VERBOSE pbx.c: Executing NoOp("SIP/33-0000007a", "Sending Hangup to CRM") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/33-0000007a", "HANGUP CAUSE: 16") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/33-0000007a", "0?Set(__CRM_VOICEMAIL=)") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/33-0000007a", "MASTER CHANNEL: 1566551870.122 = 1566551869.119") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/33-0000007a", "1?return") in new stack
VERBOSE pbx_builtins.c: Goto (crm-hangup,s,8)
VERBOSE pbx.c: Executing Return("SIP/33-0000007a", "") in new stack
VERBOSE app_stack.c: Spawn extension (from-internal, 1, 1) exited non-zero on 'SIP/33-0000007a'
VERBOSE app_stack.c: SIP/33-0000007a Internal Gosub(crm-hangup,s,1) complete GOSUB_RETVAL=
VERBOSE app_macro.c: Spawn extension (macro-dial, s, 23) exited non-zero on 'SIP/Cosmote-00000077' in macro 'dial'
VERBOSE pbx.c: Spawn extension (ext-group, 1, 18) exited non-zero on 'SIP/Cosmote-00000077'
VERBOSE pbx.c: Executing Macro("SIP/Cosmote-00000077", "hangupcall,") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/Cosmote-00000077", "1?theend") in new stack
VERBOSE pbx_builtins.c: Goto (macro-hangupcall,s,3)
VERBOSE pbx.c: Executing ExecIf("SIP/Cosmote-00000077", "0?Set(CDR(recordingfile)=)") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/Cosmote-00000077", "SIP/33-0000007a montior file= ") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/Cosmote-00000077", "1?skipagi") in new stack
VERBOSE pbx_builtins.c: Goto (macro-hangupcall,s,7)
VERBOSE pbx.c: Executing Hangup("SIP/Cosmote-00000077", "") in new stack
VERBOSE app_macro.c: Spawn extension (macro-hangupcall, s, 7) exited non-zero on 'SIP/Cosmote-00000077' in macro 'hangupcall'
VERBOSE pbx.c: Spawn extension (ext-group, h, 1) exited non-zero on 'SIP/Cosmote-00000077'
VERBOSE app_stack.c: SIP/Cosmote-00000077 Internal Gosub(crm-hangup,s,1) start
VERBOSE pbx.c: Executing NoOp("SIP/Cosmote-00000077", "Sending Hangup to CRM") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/Cosmote-00000077", "HANGUP CAUSE: 17") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/Cosmote-00000077", "0?Set(__CRM_VOICEMAIL=)") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/Cosmote-00000077", "MASTER CHANNEL: 1566551869.119 = 1566551869.119") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/Cosmote-00000077", "0?return") in new stack
VERBOSE pbx.c: Executing Set("SIP/Cosmote-00000077", "__CRM_HANGUP=1") in new stack
VERBOSE pbx.c: Executing AGI("SIP/Cosmote-00000077", "sangomacrm.agi") in new stack
VERBOSE res_agi.c: Launched AGI Script /var/lib/asterisk/agi-bin/sangomacrm.agi
VERBOSE res_agi.c: AGI Script sangomacrm.agi completed, returning 0
VERBOSE pbx.c: Executing Return("SIP/Cosmote-00000077", "") in new stack
VERBOSE app_stack.c: Spawn extension (ext-group, h, 1) exited non-zero on 'SIP/Cosmote-00000077'
VERBOSE app_stack.c: SIP/Cosmote-00000077 Internal Gosub(crm-hangup,s,1) complete GOSUB_RETVAL=
VERBOSE bridge_channel.c: Channel SIP/31-00000075 left 'simple_bridge' basic-bridge
VERBOSE app_macro.c: Spawn extension (macro-dialout-trunk, s, 32) exited non-zero on 'SIP/31-00000075' in macro 'dialout-trunk'
VERBOSE pbx.c: Spawn extension (from-internal, 6985575226, 6) exited non-zero on 'SIP/31-00000075'
VERBOSE pbx.c: Executing Macro("SIP/31-00000075", "hangupcall") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-00000075", "1?theend") in new stack
VERBOSE pbx_builtins.c: Goto (macro-hangupcall,s,3)
VERBOSE bridge_channel.c: Channel SIP/Cosmote-00000076 left 'simple_bridge' basic-bridge
VERBOSE pbx.c: Executing ExecIf("SIP/31-00000075", "0?Set(CDR(recordingfile)=)") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/31-00000075", "SIP/Cosmote-00000076 montior file= ") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-00000075", "1?skipagi") in new stack
VERBOSE pbx_builtins.c: Goto (macro-hangupcall,s,7)
VERBOSE pbx.c: Executing Hangup("SIP/31-00000075", "") in new stack
VERBOSE app_macro.c: Spawn extension (macro-hangupcall, s, 7) exited non-zero on 'SIP/31-00000075' in macro 'hangupcall'
VERBOSE pbx.c: Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/31-00000075'
VERBOSE app_stack.c: SIP/31-00000075 Internal Gosub(crm-hangup,s,1) start
VERBOSE pbx.c: Executing NoOp("SIP/31-00000075", "Sending Hangup to CRM") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/31-00000075", "HANGUP CAUSE: 16") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-00000075", "0?Set(__CRM_VOICEMAIL=)") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/31-00000075", "MASTER CHANNEL: 1566551869.117 = 1566551869.117") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-00000075", "0?return") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-00000075", "__CRM_HANGUP=1") in new stack
VERBOSE pbx.c: Executing AGI("SIP/31-00000075", "sangomacrm.agi") in new stack
VERBOSE res_agi.c: Launched AGI Script /var/lib/asterisk/agi-bin/sangomacrm.agi
VERBOSE res_agi.c: AGI Script sangomacrm.agi completed, returning 0
VERBOSE pbx.c: Executing Return("SIP/31-00000075", "") in new stack
VERBOSE app_stack.c: Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/31-00000075'
VERBOSE app_stack.c: SIP/31-00000075 Internal Gosub(crm-hangup,s,1) complete GOSUB_RETVAL=
NOTICE chan_sip.c: Peer 'Cosmote' is now UNREACHABLE! Last qualify: 20
NOTICE chan_sip.c: -- Registration for '+302510620630@ims.otenet.gr' timed out, trying again (Attempt #2)
NOTICE chan_sip.c: -- Registration for '+302510620630@ims.otenet.gr' timed out, trying again (Attempt #3)
VERBOSE chan_sip.c: Got SIP response 486 "Busy Here" back from 195.167.16.17:5060
NOTICE chan_sip.c: Peer 'Cosmote' is now Reachable. (29ms / 2000ms)
NOTICE chan_sip.c: -- Registration for '+302510620630@ims.otenet.gr' timed out, trying again (Attempt #4)
WARNING chan_sip.c: Forbidden - wrong password on authentication for REGISTER for '+302510620630' to 'ims.otenet.gr'
VERBOSE netsock2.c: Using SIP RTP TOS bits 184
VERBOSE netsock2.c: Using SIP RTP CoS mark 5
VERBOSE pbx.c: Executing Macro("SIP/32-0000007b", "user-callerid,LIMIT,EXTERNAL,") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "TOUCH_MONITOR=1566552544.123") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "AMPUSER=32") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/32-0000007b", "0?report") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/32-0000007b", "1?Set(REALCALLERIDNUM=32)") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "AMPUSER=32") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/32-0000007b", "0?limit") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "AMPUSERCIDNAME=ergastirio") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/32-0000007b", "0?Set(__CIDMASQUERADING=TRUE)") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/32-0000007b", "0?report") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "AMPUSERCID=32") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "__DIAL_OPTIONS=HhTtr") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "CALLERID(all)="ergastirio" <32>") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/32-0000007b", "0?limit") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/32-0000007b", "1?Set(GROUP(concurrency_limit)=32)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/32-0000007b", "0?Set(CHANNEL(language)=)") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/32-0000007b", "Macro Depth is 1") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/32-0000007b", "1?report2:macroerror") in new stack
VERBOSE pbx_builtins.c: Goto (macro-user-callerid,s,18)
VERBOSE pbx.c: Executing GotoIf("SIP/32-0000007b", "1?continue") in new stack
VERBOSE pbx_builtins.c: Goto (macro-user-callerid,s,37)
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "CALLERID(number)=32") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "CALLERID(name)=ergastirio") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/32-0000007b", "0?cnum") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "CDR(cnam)=ergastirio") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "CDR(cnum)=32") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "CHANNEL(language)=en") in new stack
VERBOSE pbx.c: Executing Gosub("SIP/32-0000007b", "sub-record-check,s,1(out,6932196932,dontcare)") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/32-0000007b", "0?initialized") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "__REC_STATUS=INITIALIZED") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "NOW=1566552544") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "__DAY=23") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "__MONTH=08") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "__YEAR=2019") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "__TIMESTR=20190823-122904") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "__FROMEXTEN=32") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "__MON_FMT=wav") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/32-0000007b", "Recordings initialized") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/32-0000007b", "0?Set(ARG3=dontcare)") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "REC_POLICY_MODE_SAVE=") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/32-0000007b", "0?Set(REC_STATUS=NO)") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/32-0000007b", "3?checkaction") in new stack
VERBOSE pbx_builtins.c: Goto (sub-record-check,s,17)
VERBOSE pbx.c: Executing GotoIf("SIP/32-0000007b", "1?sub-record-check,out,1") in new stack
VERBOSE pbx_builtins.c: Goto (sub-record-check,out,1)
VERBOSE pbx.c: Executing NoOp("SIP/32-0000007b", "Outbound Recording Check from 32 to 6932196932") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "RECMODE=dontcare") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/32-0000007b", "1?Goto(routewins)") in new stack
VERBOSE pbx_builtins.c: Goto (sub-record-check,out,7)
VERBOSE pbx.c: Executing Gosub("SIP/32-0000007b", "recordcheck,1(dontcare,out,6932196932)") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/32-0000007b", "Starting recording check against dontcare") in new stack
VERBOSE pbx.c: Executing Goto("SIP/32-0000007b", "dontcare") in new stack
VERBOSE pbx_builtins.c: Goto (sub-record-check,recordcheck,3)
VERBOSE pbx.c: Executing Return("SIP/32-0000007b", "") in new stack
VERBOSE pbx.c: Executing Return("SIP/32-0000007b", "") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/32-0000007b", "0 ?Set(CDR(accountcode)=)") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "MOHCLASS=default") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "_NODEST=") in new stack
VERBOSE pbx.c: Executing Macro("SIP/32-0000007b", "dialout-trunk,1,6932196932,,off") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "DIAL_TRUNK=1") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/32-0000007b", "0?Set(DIAL_OPTIONS=Hhtr)") in new stack
VERBOSE pbx.c: Executing GosubIf("SIP/32-0000007b", "0?sub-pincheck,s,1()") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/32-0000007b", "0?Set(CALLERID(num)=32)") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/32-0000007b", "0?disabletrunk,1") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "DIAL_NUMBER=6932196932") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "DIAL_TRUNK_OPTIONS=HhTtr") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "OUTBOUND_GROUP=OUT_1") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "DIAL_TRUNK_OPTIONS=T") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/32-0000007b", "1?nomax") in new stack
VERBOSE pbx_builtins.c: Goto (macro-dialout-trunk,s,12)
VERBOSE pbx.c: Executing GotoIf("SIP/32-0000007b", "0?skipoutcid") in new stack
VERBOSE pbx.c: Executing Macro("SIP/32-0000007b", "outbound-callerid,1") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/32-0000007b", "32") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/32-0000007b", "") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/32-0000007b", "off") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/32-0000007b", "0?Set(CALLERPRES(name-pres)=)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/32-0000007b", "0?Set(CALLERPRES(num-pres)=)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/32-0000007b", "0?Set(REALCALLERIDNUM=32)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/32-0000007b", "0?Set(AMPUSER=32)") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/32-0000007b", "1?normcid") in new stack
VERBOSE pbx_builtins.c: Goto (macro-outbound-callerid,s,12)
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "USEROUTCID=32") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "EMERGENCYCID=") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "TRUNKOUTCID=+302510620630") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/32-0000007b", "1?trunkcid") in new stack
VERBOSE pbx_builtins.c: Goto (macro-outbound-callerid,s,21)
VERBOSE pbx.c: Executing ExecIf("SIP/32-0000007b", "1?Set(CALLERID(all)=+302510620630)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/32-0000007b", "1?Set(CALLERID(all)=32)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/32-0000007b", "0?Set(CALLERID(all)=)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/32-0000007b", "0?Set(CALLERPRES(name-pres)=prohib_passed_screen)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/32-0000007b", "0?Set(CALLERPRES(num-pres)=prohib_passed_screen)") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "CDR(outbound_cnum)=32") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "CDR(outbound_cnam)=") in new stack
VERBOSE pbx.c: Executing GosubIf("SIP/32-0000007b", "0?sub-flp-1,s,1()") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "OUTNUM=6932196932") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "custom=SIP/Cosmote") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/32-0000007b", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)T)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/32-0000007b", "0?Set(DIAL_TRUNK_OPTIONS=TM(confirm))") in new stack
VERBOSE pbx.c: Executing Macro("SIP/32-0000007b", "dialout-trunk-predial-hook,") in new stack
VERBOSE pbx.c: Executing MacroExit("SIP/32-0000007b", "") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/32-0000007b", "0?skipcrm") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "__CRM_DIRECTION=OUTBOUND") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "__CRM_DESTINATION=6932196932") in new stack
VERBOSE pbx.c: Executing Set("SIP/32-0000007b", "__CRM_SOURCE=32") in new stack
VERBOSE pbx.c: Executing AGI("SIP/32-0000007b", "sangomacrm.agi") in new stack
VERBOSE res_agi.c: Launched AGI Script /var/lib/asterisk/agi-bin/sangomacrm.agi
VERBOSE res_agi.c: AGI Script sangomacrm.agi completed, returning 4
VERBOSE app_macro.c: Spawn extension (macro-dialout-trunk, s, 24) exited non-zero on 'SIP/32-0000007b' in macro 'dialout-trunk'
VERBOSE pbx.c: Spawn extension (from-internal, 6932196932, 6) exited non-zero on 'SIP/32-0000007b'
VERBOSE pbx.c: Executing Macro("SIP/32-0000007b", "hangupcall") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/32-0000007b", "1?theend") in new stack
VERBOSE pbx_builtins.c: Goto (macro-hangupcall,s,3)
VERBOSE pbx.c: Executing ExecIf("SIP/32-0000007b", "0?Set(CDR(recordingfile)=)") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/32-0000007b", " montior file= ") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/32-0000007b", "1?skipagi") in new stack
VERBOSE pbx_builtins.c: Goto (macro-hangupcall,s,7)
VERBOSE pbx.c: Executing Hangup("SIP/32-0000007b", "") in new stack
VERBOSE app_macro.c: Spawn extension (macro-hangupcall, s, 7) exited non-zero on 'SIP/32-0000007b' in macro 'hangupcall'
VERBOSE pbx.c: Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/32-0000007b'
VERBOSE netsock2.c: Using SIP RTP TOS bits 184
VERBOSE netsock2.c: Using SIP RTP CoS mark 5
VERBOSE pbx.c: Executing Macro("SIP/31-0000007c", "user-callerid,LIMIT,EXTERNAL,") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "TOUCH_MONITOR=1566554061.124") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "AMPUSER=31") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "0?report") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "1?Set(REALCALLERIDNUM=31)") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "AMPUSER=31") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "0?limit") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "AMPUSERCIDNAME=grafeio") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "0?Set(__CIDMASQUERADING=TRUE)") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "0?report") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "AMPUSERCID=31") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "__DIAL_OPTIONS=HhTtr") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "CALLERID(all)="grafeio" <31>") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "0?limit") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "1?Set(GROUP(concurrency_limit)=31)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "0?Set(CHANNEL(language)=)") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/31-0000007c", "Macro Depth is 1") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "1?report2:macroerror") in new stack
VERBOSE pbx_builtins.c: Goto (macro-user-callerid,s,18)
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "1?continue") in new stack
VERBOSE pbx_builtins.c: Goto (macro-user-callerid,s,37)
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "CALLERID(number)=31") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "CALLERID(name)=grafeio") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "0?cnum") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "CDR(cnam)=grafeio") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "CDR(cnum)=31") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "CHANNEL(language)=en") in new stack
VERBOSE pbx.c: Executing Gosub("SIP/31-0000007c", "sub-record-check,s,1(out,6974900493,dontcare)") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "0?initialized") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "__REC_STATUS=INITIALIZED") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "NOW=1566554061") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "__DAY=23") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "__MONTH=08") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "__YEAR=2019") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "__TIMESTR=20190823-125421") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "__FROMEXTEN=31") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "__MON_FMT=wav") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/31-0000007c", "Recordings initialized") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "0?Set(ARG3=dontcare)") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "REC_POLICY_MODE_SAVE=") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "0?Set(REC_STATUS=NO)") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "3?checkaction") in new stack
VERBOSE pbx_builtins.c: Goto (sub-record-check,s,17)
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "1?sub-record-check,out,1") in new stack
VERBOSE pbx_builtins.c: Goto (sub-record-check,out,1)
VERBOSE pbx.c: Executing NoOp("SIP/31-0000007c", "Outbound Recording Check from 31 to 6974900493") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "RECMODE=dontcare") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "1?Goto(routewins)") in new stack
VERBOSE pbx_builtins.c: Goto (sub-record-check,out,7)
VERBOSE pbx.c: Executing Gosub("SIP/31-0000007c", "recordcheck,1(dontcare,out,6974900493)") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/31-0000007c", "Starting recording check against dontcare") in new stack
VERBOSE pbx.c: Executing Goto("SIP/31-0000007c", "dontcare") in new stack
VERBOSE pbx_builtins.c: Goto (sub-record-check,recordcheck,3)
VERBOSE pbx.c: Executing Return("SIP/31-0000007c", "") in new stack
VERBOSE pbx.c: Executing Return("SIP/31-0000007c", "") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "0 ?Set(CDR(accountcode)=)") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "MOHCLASS=default") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "_NODEST=") in new stack
VERBOSE pbx.c: Executing Macro("SIP/31-0000007c", "dialout-trunk,1,6974900493,,off") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "DIAL_TRUNK=1") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "0?Set(DIAL_OPTIONS=Hhtr)") in new stack
VERBOSE pbx.c: Executing GosubIf("SIP/31-0000007c", "0?sub-pincheck,s,1()") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "0?Set(CALLERID(num)=31)") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "0?disabletrunk,1") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "DIAL_NUMBER=6974900493") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "DIAL_TRUNK_OPTIONS=HhTtr") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "OUTBOUND_GROUP=OUT_1") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "DIAL_TRUNK_OPTIONS=T") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "1?nomax") in new stack
VERBOSE pbx_builtins.c: Goto (macro-dialout-trunk,s,12)
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "0?skipoutcid") in new stack
VERBOSE pbx.c: Executing Macro("SIP/31-0000007c", "outbound-callerid,1") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/31-0000007c", "31") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/31-0000007c", "") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/31-0000007c", "off") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "0?Set(CALLERPRES(name-pres)=)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "0?Set(CALLERPRES(num-pres)=)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "0?Set(REALCALLERIDNUM=31)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "0?Set(AMPUSER=31)") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "1?normcid") in new stack
VERBOSE pbx_builtins.c: Goto (macro-outbound-callerid,s,12)
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "USEROUTCID=31") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "EMERGENCYCID=") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "TRUNKOUTCID=+302510620630") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "1?trunkcid") in new stack
VERBOSE pbx_builtins.c: Goto (macro-outbound-callerid,s,21)
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "1?Set(CALLERID(all)=+302510620630)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "1?Set(CALLERID(all)=31)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "0?Set(CALLERID(all)=)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "0?Set(CALLERPRES(name-pres)=prohib_passed_screen)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "0?Set(CALLERPRES(num-pres)=prohib_passed_screen)") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "CDR(outbound_cnum)=31") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "CDR(outbound_cnam)=") in new stack
VERBOSE pbx.c: Executing GosubIf("SIP/31-0000007c", "0?sub-flp-1,s,1()") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "OUTNUM=6974900493") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "custom=SIP/Cosmote") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)T)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "0?Set(DIAL_TRUNK_OPTIONS=TM(confirm))") in new stack
VERBOSE pbx.c: Executing Macro("SIP/31-0000007c", "dialout-trunk-predial-hook,") in new stack
VERBOSE pbx.c: Executing MacroExit("SIP/31-0000007c", "") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "0?skipcrm") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "__CRM_DIRECTION=OUTBOUND") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "__CRM_DESTINATION=6974900493") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "__CRM_SOURCE=31") in new stack
VERBOSE pbx.c: Executing AGI("SIP/31-0000007c", "sangomacrm.agi") in new stack
VERBOSE res_agi.c: Launched AGI Script /var/lib/asterisk/agi-bin/sangomacrm.agi
VERBOSE res_agi.c: AGI Script sangomacrm.agi completed, returning 0
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "CHANNEL(hangup_handler_push)=crm-hangup,s,1") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/31-0000007c", "CRM Finished") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "0?bypass,1") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "1?Set(CONNECTEDLINE(num,i)=6974900493)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "1?Set(CONNECTEDLINE(name,i)=CID:31)") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "0?Set(CONNECTEDLINE(name,i)=CID:(Hidden)31)") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "0?customtrunk") in new stack
VERBOSE pbx.c: Executing Dial("SIP/31-0000007c", "SIP/Cosmote/6974900493,300,Tb(func-apply-sipheaders^s^1,(1))") in new stack
VERBOSE netsock2.c: Using SIP RTP TOS bits 184
VERBOSE netsock2.c: Using SIP RTP CoS mark 5
VERBOSE app_stack.c: SIP/Cosmote-0000007d Internal Gosub(func-apply-sipheaders,s,1(1)) start
VERBOSE pbx.c: Executing ExecIf("SIP/Cosmote-0000007d", "0?Set(CHANNEL(hangup_handler_push)=crm-hangup,s,1)") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/Cosmote-0000007d", "Applying SIP Headers to channel SIP/Cosmote-0000007d") in new stack
VERBOSE pbx.c: Executing Set("SIP/Cosmote-0000007d", "TECH=SIP") in new stack
VERBOSE pbx.c: Executing Set("SIP/Cosmote-0000007d", "SIPHEADERKEYS=") in new stack
VERBOSE pbx.c: Executing While("SIP/Cosmote-0000007d", "0") in new stack
VERBOSE app_while.c: Jumping to priority 12
VERBOSE pbx.c: Executing Return("SIP/Cosmote-0000007d", "") in new stack
VERBOSE app_stack.c: Spawn extension (from-trunk-sip-Cosmote, 6974900493, 1) exited non-zero on 'SIP/Cosmote-0000007d'
VERBOSE app_stack.c: SIP/Cosmote-0000007d Internal Gosub(func-apply-sipheaders,s,1(1)) complete GOSUB_RETVAL=
VERBOSE app_dial.c: Called SIP/Cosmote/6974900493
WARNING chan_sip.c: Received response: "Forbidden" from ';tag=as5cc64405'
VERBOSE app_dial.c: Everyone is busy/congested at this time (1:0/0/1)
VERBOSE pbx.c: Executing NoOp("SIP/31-0000007c", "Dial failed for some reason with DIALSTATUS = CHANUNAVAIL and HANGUPCAUSE = 21") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "0?continue,1:s-CHANUNAVAIL,1") in new stack
VERBOSE pbx_builtins.c: Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "RC=21") in new stack
VERBOSE pbx.c: Executing Goto("SIP/31-0000007c", "21,1") in new stack
VERBOSE pbx_builtins.c: Goto (macro-dialout-trunk,21,1)
VERBOSE pbx.c: Executing Goto("SIP/31-0000007c", "continue,1") in new stack
VERBOSE pbx_builtins.c: Goto (macro-dialout-trunk,continue,1)
VERBOSE pbx.c: Executing NoOp("SIP/31-0000007c", "TRUNK Dial failed due to CHANUNAVAIL HANGUPCAUSE: 21 - failing through to other trunks") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "1?Set(CALLERID(number)=31)") in new stack
VERBOSE pbx.c: Executing Macro("SIP/31-0000007c", "outisbusy,") in new stack
VERBOSE pbx.c: Executing Progress("SIP/31-0000007c", "") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "0?emergency,1") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "0?intracompany,1") in new stack
VERBOSE pbx.c: Executing Playback("SIP/31-0000007c", "all-circuits-busy-now&please-try-call-later, noanswer") in new stack
VERBOSE file.c: Playing 'all-circuits-busy-now.alaw' (language 'en')
VERBOSE file.c: Playing 'please-try-call-later.alaw' (language 'en')
VERBOSE pbx.c: Executing Congestion("SIP/31-0000007c", "20") in new stack
WARNING channel.c: Prodding channel 'SIP/31-0000007c' failed
VERBOSE app_macro.c: Spawn extension (macro-outisbusy, s, 5) exited non-zero on 'SIP/31-0000007c' in macro 'outisbusy'
VERBOSE pbx.c: Spawn extension (from-internal, 6974900493, 7) exited non-zero on 'SIP/31-0000007c'
VERBOSE pbx.c: Executing Macro("SIP/31-0000007c", "hangupcall") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "1?theend") in new stack
VERBOSE pbx_builtins.c: Goto (macro-hangupcall,s,3)
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "0?Set(CDR(recordingfile)=)") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/31-0000007c", " montior file= ") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "1?skipagi") in new stack
VERBOSE pbx_builtins.c: Goto (macro-hangupcall,s,7)
VERBOSE pbx.c: Executing Hangup("SIP/31-0000007c", "") in new stack
VERBOSE app_macro.c: Spawn extension (macro-hangupcall, s, 7) exited non-zero on 'SIP/31-0000007c' in macro 'hangupcall'
VERBOSE pbx.c: Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/31-0000007c'
VERBOSE app_stack.c: SIP/31-0000007c Internal Gosub(crm-hangup,s,1) start
VERBOSE pbx.c: Executing NoOp("SIP/31-0000007c", "Sending Hangup to CRM") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/31-0000007c", "HANGUP CAUSE: 34") in new stack
VERBOSE pbx.c: Executing ExecIf("SIP/31-0000007c", "0?Set(__CRM_VOICEMAIL=)") in new stack
VERBOSE pbx.c: Executing NoOp("SIP/31-0000007c", "MASTER CHANNEL: 1566554061.124 = 1566554061.124") in new stack
VERBOSE pbx.c: Executing GotoIf("SIP/31-0000007c", "0?return") in new stack
VERBOSE pbx.c: Executing Set("SIP/31-0000007c", "__CRM_HANGUP=1") in new stack
VERBOSE pbx.c: Executing AGI("SIP/31-0000007c", "sangomacrm.agi") in new stack
VERBOSE res_agi.c: Launched AGI Script /var/lib/asterisk/agi-bin/sangomacrm.agi
VERBOSE res_agi.c: AGI Script sangomacrm.agi completed, returning 0
VERBOSE pbx.c: Executing Return("SIP/31-0000007c", "") in new stack
VERBOSE app_stack.c: Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/31-0000007c'
VERBOSE app_stack.c: SIP/31-0000007c Internal Gosub(crm-hangup,s,1) complete GOSUB_RETVAL=

Βρισκω καποιες φορες το κουμπι Apply Config κοκκινο χωρις να εχω αλλαξει κατι. Μπορω να δω τι αλλαγες θα γινουν αν το πατησω;

Ευχαριστω!

Με αυτον τον τροπο συνδεομαι σε raspberry χωρις προβλημα. Εδω ομως δεν πιανει. Μηπως το κοβει το firewall του freepbx;
Ευχαριστω!

Σας ευχαριστω για τς οδηγιες. Οι φωνη δεν ακουγεται πολυ φυσικη βεβαια..

Υπαρχει τροπος κανοντας port forwarding να μπορω να μπω στο wui του freepbx; Το δοκιμασα αλλα δεν πετυχε...

Υπαρχει καποια αξιοπρεπης μηχανη TTS που να υποστηριζει Ελληνικα, ωστε να αποφυγω την εγγραφη μηνυματων;

Σε ευχαριστω για το 11888.gr, ειχα δει το τοπικ, αλλα δεν ασχοληθηκα προς το παρον.

Ευχαριστω!

Ειχα στο inbound route το IVR, στο οποιο ειχα το recording, τωρα εβαλα απ'ευθειας το play recording.
Σε ευχαριστω!

- - - Updated - - -

Στο Ring group εχω βαλει Ring Time 120sec. Μπορει στις ωρες που ειμαστε κλειστα να απανταει ο τηλεφωνητης σε περιπτωση που δεν απαντησουμε, αλλα οχι μετα απο 120sec, μετα απο πχ 10sec ;

Καλη ιδεα, θα το δω. Τωρα το χρειαζομαι γιατι ειμαστε συνεχεια κλειστα λογω απεργιας.
Σε ευχαριστω!

Μπορω νε το FreePBX να εσω λειτουργεια τηλεφωνητη, δε με ενδιαφερει η καταγραφεη μυνηματων, χρειαζομαι μονο οταν καποιος με καλει μετα 2-3 χτυπηματα να απανταει ο τηλεφωνητης και να λεει πχ οτι ειμαστε κλειστα.

Edit: Με το IVR γινεται.

Ετσι μπηκε. Ευχαριστω!

Το password στο user management ειναι ******

2. Στο Admin > User Management εχεις καποιον χρηστη? Απο προεπιλογη δημιουργειται αυτοματα χρηστης με τη δημιουργια καθε εσωτερικου. Μεσα στο extension κατω απο ext/secret κλπ. υπαρχει το user management. Εκεινα τα στοιχεια βαζεις στο ucp.

Δεν εχω δημιουργησει χρηστη, υπαρχουν μονοι οι 4 που εχουν δημιουργηθει απο τα extensions. Αυτοι υπαρχουν στο Admin > User Management.

Στο extension στο User Manager Settings204279 υπαρχει ενα password που αλλαζει με καθε refresh. Με username 31 kai password αυτο που φαινεται, που ομως ειναι αλλο καθε φορα δεν κανει login: Invalid Login Credentials

Εχω κανει στο Στο Admin > User Management > UCP > Allow Login: Yes για το συγκεκριμενο χρηστη.

Το βασικο προβλημα ειναι λογικα στο password. Γιατι μεταβαλλεται;
Ευχαριστω!

Ολα ΟΚ σε νεα εγκατασταση.

1. Σχετικα με το Firewall:
Εχω ενα δικτυο με ip router 192.168.1.1.

Responsive Firewall Enabled

Στο interfaces βλεπω: Default Zone Internet 192.168.1.5/24 (το IP που ειναι εγκατεστημενο το FreePBX).

Στο tab Networks ειναι Trusted (Excluded from Firewall):
192.168.1.2/32
192.168.1.0/24
192.168.0.0/16 (δεν εχω δικτυο 192.168.0)
172.16.0.0/12
10.0.0.0/8
fc00::/8
fd00::/8

Ειναι ΟΚ;204270

2. Δεν μπορω να συνδεθω στο UCP. Βαζω username τον αριθμο του extension, ομως password οποιο και αν δοκιμασα δεν ειναι σωστο. Ουσιαστικα ο user του extension που δημιουργηθηκε αυτοματα δεν ξερω τι password εχει, φαινεται μονο το secret που ομως ειναι για αλλη χρηση.

Σας ευχαριστω!

Ξαναγυρισα στο raspberry. Ισως φταιει που εγκατεστησα το freepbx στο σπιτι και μετα το πηγα στη δουλεια σε αλλο δικτυο. Οποτε αυριο καινουρια εγκατασταση και βλεπουμε.
Παντως το freepbx εχει παρα πολυ περισσοτερα πραγματα απο το raspberry freepbx.

Σε ποια ρυθμιση; Στο inbound route το εχω +302χχχχχχχ

delete

Απο το κινητο που παιρνω δεν ακουγεται καν οτι χτυπαει.

Το αποσυνδεσα, δε βλεπω τιποτα εισερχομενο στο call event logging.

Εκανα το trunk disable, δεν αρκει;