Σελ. 5 από 9 ΠρώτηΠρώτη ... 34567 ... ΤελευταίαΤελευταία
Εμφάνιση 61-75 από 121
  1. #61
    Εγγραφή
    13-02-2004
    Περιοχή
    Αθήνα
    Μηνύματα
    17.102
    Downloads
    4
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    200/200 Mbps
    ISP
    Inalan FTTH
    Router
    CRS109-8G-1S-2HnD+HapAC2
    What's new in 6.44beta17 (2018-Oct-04 09:42):

    Κώδικας:
    MAJOR CHANGES IN v6.44:
    ----------------------
    !) cloud - added command "/system backup cloud" for backup storing on cloud (CLI only);
    !) upgrade - release channels renamed - "bugfix" to "long-term", "current" to "stable" and "release candidate" to "testing";
    !) upgrade - "testing" release channel now can contain "beta" together with "release-candidate" versions;
    ----------------------
    
    Changes in this release:
    
    *) bridge - fixed possible memory leak when VLAN filtering is used;
    *) dhcpv4-server - use client MAC address for dual stack queue when "client-id" is not received;
    *) ethernet - fixed IPv6 packet forwarding on IPQ4018 devices;
    *) health - improved fan control stability on CRS328-24P-4S+RM;
    *) led - fixed default LED configuration for SXT LTE kit devices;
    *) led - fixed power LED turning on after reboot when "dark-mode" is used;
    *) lte - added "firmware-upgrade" command for R11e-LTE international modems (CLI only);
    *) wireless - improved signal strength at low TX power on LHG 5 ac, LHG 5 ac XL and LDF 5 ac ("/system routerboard upgrade" required);

  2. #62
    Εγγραφή
    13-02-2004
    Περιοχή
    Αθήνα
    Μηνύματα
    17.102
    Downloads
    4
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    200/200 Mbps
    ISP
    Inalan FTTH
    Router
    CRS109-8G-1S-2HnD+HapAC2
    What's new in 6.44beta20 (2018-Oct-09 09:29):

    Κώδικας:
    Changes in this release:
    
    *) crs328 - fixed SFP+ interface linking on CRS328-24P-4S+RM (introduced in v6.44beta17);
    *) crs328 - improved link status update on disabled SFP+ interface when using DAC;
    *) crs3xx - properly read "eeprom" data after different module inserted in disabled interface;
    *) dhcp - added "allow-dual-stack-queue" setting for IPv4/IPv6 DHCP servers to control dynamic lease/binding behaviour (CLI only);
    *) dhcpv6-server - improved DHCPv6 server stability when using "print" command;
    *) led - added "dark-mode" functionality for LHG and LDF series devices;
    *) lte - added "firmware-upgrade" command for R11e-LTE international modems (CLI only);
    *) lte - fixed connection issue when LTE modem was de-registered from network for more than 1 minute;
    *) w60g - general stability and performance improvements;
    *) w60g - improved stability for short distance links;

  3. #63
    Εγγραφή
    28-03-2006
    Περιοχή
    KV G434
    Ηλικία
    49
    Μηνύματα
    42.180
    Downloads
    23
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    310/31
    ISP
    Cosmote
    DSLAM
    ΟΤΕ - ΕΡΜΟΥ
    Router
    RB4011iGS+5 ONT: G-010G-R
    v6.45beta [testing] is released!
    What's new in 6.45beta6 (2019-Mar-05 08:51):
    Changes in this release:
    Spoiler:
    *) bridge - fixed possible memory leak when using "ingress-filtering=yes" on bridge interface;
    *) certificate - added support for ECC (Elliptic Curve Cryptography);
    *) certificate - force 3DES encryption for P12 certificate export;
    *) crs3xx - correctly display auto-negotiation information for SFP/SFP+ interfaces in 1Gbps rate;
    *) crs3xx - fixed auto negotiation when 2-pair twisted cable is used (downshift feature);
    *) dhcp - fixed dual stack queue addition;
    *) dhcpv4-server - added "vendor-class-id" matcher (CLI only);
    *) dhcpv6-server - use MAC address for RADIUS user when "allow-dual-stack-queue=yes";
    *) ethernet - added support for 25Gbps and 40Gbps rates;
    *) fetch - improved user policy lookup;
    *) gps - increase precision for dd format;
    *) ipsec - fixed dynamic L2TP peer and identity configuration missing after reboot (introduced in v6.44);
    *) ipsec - use "remote-id=ignore" for dynamic L2TP configuration (introduced in v6.44);
    *) ipv6 - do not allow setting "preferred-lifetime" longer than "valid-lifetime";
    *) lte - added passthrough interface subnet selection;
    *) lte - added support for manual operator selection;
    *) lte - do not show error message for info commands that are not supported;
    *) lte - do not show "session-uptime" if session is not up;
    *) lte - improved R11e-4G modem operation;
    *) lte - renamed firmware upgrade "path" command to "firmware-file" (CLI only);
    *) lte - reset LTE modem only when SIM slot is changed on dual SIM slot devices;
    *) lte - show alphanumeric value for operator info;
    *) lte - show correct firmware revision after firmware upgrade;
    *) lte - use secondary DNS for DNS server configuration;
    *) ppp - added initial support for Quectel BG96;
    *) rb4011 - fixed ether10 failing to auto negotiate link speed to 1Gbps;
    *) sfp - fixed S-35LC20D transceiver DDMI readouts after reboot;
    *) sms - improved delivery report logging;
    *) snmp - added "dot1dStpPortTable" OID;
    *) ssh - use correct user when "output-to-file" parameter is used;
    *) switch - fixed possible crash when interface state changes and DHCP Snooping is enabled;
    *) tile - improved link fault detection on SFP+ ports;
    *) winbox - added "use-local-address" parameter in "IP/Cloud" menus;
    *) wireless - fixed incorrect IP header for RADIUS accounting packet;
    *) wireless - updated "india" regulatory domain information;
    *) wireless - updated "new zealand" regulatory domain information;

    beta/testing... έχει μπερδευτεί το πράγμα...
    Τέλος πάντων...
    *) certificate - added support for ECC (Elliptic Curve Cryptography);
    | "Anyone can build a fast CPU.
    | The trick is to build a fast system."
    |____________Seymour Cray...

  4. #64
    Εγγραφή
    28-03-2006
    Περιοχή
    KV G434
    Ηλικία
    49
    Μηνύματα
    42.180
    Downloads
    23
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    310/31
    ISP
    Cosmote
    DSLAM
    ΟΤΕ - ΕΡΜΟΥ
    Router
    RB4011iGS+5 ONT: G-010G-R
    6.45beta16 changelog:
    Changes in this release:
    Spoiler:

    *) dhcpv4-server - improved stability when performing "check-status" command;
    *) ike2 - do not send "User-Name" attribute to RADIUS server if not provided;
    *) ike2 - improved XAuth identity conversion on upgrade;
    *) ipsec - added dynamic comment field for "active-peers" menu inherited from identity (CLI only);
    *) ipsec - added "ph2-total" counter to "active-peers" menu (CLI only);
    *) ipsec - added support for RADIUS accounting;
    *) ipsec - added traffic statistics to "active-peers" menu (CLI only);
    *) ipsec - do not allow adding identity to a dynamic peer;
    *) ipsec - renamed "remote-peers" to "active-peers" (CLI only);
    *) lte - use default APN name "internet" when not provided;
    *) proxy - increased minimal free RAM that can not be used for proxy services;
    *) switch - properly reapply settings after switch chip reset;
    | "Anyone can build a fast CPU.
    | The trick is to build a fast system."
    |____________Seymour Cray...

  5. #65
    Εγγραφή
    28-03-2006
    Περιοχή
    KV G434
    Ηλικία
    49
    Μηνύματα
    42.180
    Downloads
    23
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    310/31
    ISP
    Cosmote
    DSLAM
    ΟΤΕ - ΕΡΜΟΥ
    Router
    RB4011iGS+5 ONT: G-010G-R
    6.45beta19 changelog:
    Spoiler:
    *) bridge - fixed log message when hardware offloading is being enabled;
    *) certificate - added support for ECC (Elliptic Curve Cryptography);
    *) crs3xx - correctly display auto-negotiation information for SFP/SFP+ interfaces in 1Gbps rate;
    *) crs3xx - fixed auto negotiation when 2-pair twisted cable is used (downshift feature);
    *) dhcpv4-server - added "vendor-class-id" matcher (CLI only);
    *) dhcpv4-server - improved stability when performing "check-status" command;
    *) dhcpv6-server - added RADIUS accounting support;
    *) ethernet - added support for 25Gbps and 40Gbps rates;
    *) fetch - improved user policy lookup;
    *) ike2 - do not send "User-Name" attribute to RADIUS server if not provided;
    *) ike2 - improved XAuth identity conversion on upgrade;
    *) ipsec - added dynamic comment field for "active-peers" menu inherited from identity (CLI only);
    *) ipsec - added "ph2-total" counter to "active-peers" menu (CLI only);
    *) ipsec - added support for RADIUS accounting;
    *) ipsec - added traffic statistics to "active-peers" menu (CLI only);
    *) ipsec - do not allow adding identity to a dynamic peer;
    *) ipsec - renamed "remote-peers" to "active-peers" (CLI only);
    *) lte - added passthrough interface subnet selection;
    *) lte - added support for manual operator selection;
    *) lte - do not show error message for info commands that are not supported;
    *) lte - improved "info" command query;
    *) lte - improved R11e-4G modem operation;
    *) lte - renamed firmware upgrade "path" command to "firmware-file" (CLI only);
    *) lte - reset LTE modem only when SIM slot is changed on dual SIM slot devices;
    *) lte - show alphanumeric value for operator info;
    *) lte - show correct firmware revision after firmware upgrade;
    *) lte - use default APN name "internet" when not provided;
    *) lte - use secondary DNS for DNS server configuration;
    *) ppp - added initial support for Quectel BG96;
    *) proxy - increased minimal free RAM that can not be used for proxy services;
    *) rb4011 - fixed SFP linking (introduced in v6.45beta6);
    *) sfp - fixed S-35LC20D transceiver DDMI readouts after reboot;
    *) sms - allow specifying multiple "allowed-number" values;
    *) sms - improved delivery report logging;
    *) snmp - added "dot1dStpPortTable" OID;
    *) snmp - properly return multicast and broadcast packet counters for IF-MIB OIDs;
    *) ssh - use correct user when "output-to-file" parameter is used;
    *) switch - fixed possible crash when interface state changes and DHCP Snooping is enabled;
    *) switch - properly reapply settings after switch chip reset;
    *) tile - improved link fault detection on SFP+ ports;
    *) wireless - fixed incorrect IP header for RADIUS accounting packet;
    *) wireless - updated "india" regulatory domain information;
    *) wireless - updated "new zealand" regulatory domain information;
    | "Anyone can build a fast CPU.
    | The trick is to build a fast system."
    |____________Seymour Cray...

  6. #66
    Εγγραφή
    28-03-2006
    Περιοχή
    KV G434
    Ηλικία
    49
    Μηνύματα
    42.180
    Downloads
    23
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    310/31
    ISP
    Cosmote
    DSLAM
    ΟΤΕ - ΕΡΜΟΥ
    Router
    RB4011iGS+5 ONT: G-010G-R
    6.45beta20 changelog:

    Spoiler:
    *) bridge - fixed log message when hardware offloading is being enabled;
    *) certificate - added support for ECDSA certificates (prime256v1, secp384r1, secp521r1) (CLI only);
    *) certificate - removed DSA (D) flag;
    *) crs3xx - correctly display auto-negotiation information for SFP/SFP+ interfaces in 1Gbps rate;
    *) crs3xx - fixed auto negotiation when 2-pair twisted cable is used (downshift feature);
    *) dhcpv4-server - added "vendor-class-id" matcher (CLI only);
    *) dhcpv4-server - improved stability when performing "check-status" command;
    *) dhcpv6-server - added RADIUS accounting support;
    *) ethernet - added support for 25Gbps and 40Gbps rates;
    *) fetch - improved user policy lookup;
    *) ike1 - improved stability for transport mode policies on initiator side;
    *) ike2 - added support for ECDSA certificate authentication (rfc4754);
    *) ike2 - do not send "User-Name" attribute to RADIUS server if not provided;
    *) ike2 - improved XAuth identity conversion on upgrade;
    *) ike2 - prefer SAN instead of DN from certificate for ID payload;
    *) ipsec - added dynamic comment field for "active-peers" menu inherited from identity (CLI only);
    *) ipsec - added "ph2-total" counter to "active-peers" menu (CLI only);
    *) ipsec - added support for RADIUS accounting;
    *) ipsec - added traffic statistics to "active-peers" menu (CLI only);
    *) ipsec - do not allow adding identity to a dynamic peer;
    *) ipsec - renamed "remote-peers" to "active-peers" (CLI only);
    *) ipsec - renamed "rsa-signature" authentication method to "digital-signature";
    *) lte - added passthrough interface subnet selection;
    *) lte - added support for manual operator selection;
    *) lte - do not show error message for info commands that are not supported;
    *) lte - improved "info" command query;
    *) lte - improved R11e-4G modem operation;
    *) lte - renamed firmware upgrade "path" command to "firmware-file" (CLI only);
    *) lte - reset LTE modem only when SIM slot is changed on dual SIM slot devices;
    *) lte - show alphanumeric value for operator info;
    *) lte - show correct firmware revision after firmware upgrade;
    *) lte - use default APN name "internet" when not provided;
    *) lte - use secondary DNS for DNS server configuration;
    *) ppp - added initial support for Quectel BG96;
    *) proxy - increased minimal free RAM that can not be used for proxy services;
    *) rb4011 - fixed SFP linking (introduced in v6.45beta6);
    *) sfp - fixed S-35LC20D transceiver DDMI readouts after reboot;
    *) smb - fixed possible buffer overflow;
    *) sms - added USSD message functionality under "/tool sms" (CLI only);
    *) sms - allow specifying multiple "allowed-number" values;
    *) sms - improved delivery report logging;
    *) snmp - added "dot1dStpPortTable" OID;
    *) snmp - properly return multicast and broadcast packet counters for IF-MIB OIDs;
    *) ssh - do not generate host key on configuration export;
    *) ssh - use correct user when "output-to-file" parameter is used;
    *) switch - fixed possible crash when interface state changes and DHCP Snooping is enabled;
    *) switch - properly reapply settings after switch chip reset;
    *) tile - improved link fault detection on SFP+ ports;
    *) wireless - fixed incorrect IP header for RADIUS accounting packet;
    *) wireless - improved DFS radar detection when using non-ETSI regulated country;
    *) wireless - updated "india" regulatory domain information;
    *) wireless - updated "new zealand" regulatory domain information;
    | "Anyone can build a fast CPU.
    | The trick is to build a fast system."
    |____________Seymour Cray...

  7. #67
    Εγγραφή
    28-03-2006
    Περιοχή
    KV G434
    Ηλικία
    49
    Μηνύματα
    42.180
    Downloads
    23
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    310/31
    ISP
    Cosmote
    DSLAM
    ΟΤΕ - ΕΡΜΟΥ
    Router
    RB4011iGS+5 ONT: G-010G-R
    6.45beta22 changelog:
    Spoiler:
    *) bridge - fixed log message when hardware offloading is being enabled;
    *) certificate - added support for ECDSA certificates (prime256v1, secp384r1, secp521r1) (CLI only);
    *) certificate - made RAM the default CRL storage location;
    *) certificate - removed DSA (D) flag;
    *) crs3xx - correctly display auto-negotiation information for SFP/SFP+ interfaces in 1Gbps rate;
    *) crs3xx - fixed auto negotiation when 2-pair twisted cable is used (downshift feature);
    *) dhcpv4-server - added "vendor-class-id" matcher (CLI only);
    *) dhcpv4-server - improved stability when performing "check-status" command;
    *) dhcpv6-server - added RADIUS accounting support;
    *) ethernet - added support for 25Gbps and 40Gbps rates;
    *) fetch - improved user policy lookup;
    *) ike1 - adjusted debug packet logging topics;
    *) ike1 - improved stability for transport mode policies on initiator side;
    *) ike2 - added support for ECDSA certificate authentication (rfc4754);
    *) ike2 - do not send "User-Name" attribute to RADIUS server if not provided;
    *) ike2 - improved XAuth identity conversion on upgrade;
    *) ike2 - prefer SAN instead of DN from certificate for ID payload;
    *) ipsec - added dynamic comment field for "active-peers" menu inherited from identity (CLI only);
    *) ipsec - added "ph2-total" counter to "active-peers" menu (CLI only);
    *) ipsec - added support for RADIUS accounting;
    *) ipsec - added traffic statistics to "active-peers" menu (CLI only);
    *) ipsec - do not allow adding identity to a dynamic peer;
    *) ipsec - fixed freshly created identity not taken in action;
    *) ipsec - renamed "remote-peers" to "active-peers" (CLI only);
    *) ipsec - renamed "rsa-signature" authentication method to "digital-signature";
    *) lte - added passthrough interface subnet selection;
    *) lte - added support for manual operator selection;
    *) lte - allow to specify URL for firmware upgrade "firmware-file" parameter;
    *) lte - do not show error message for info commands that are not supported;
    *) lte - improved "info" command query;
    *) lte - improved R11e-4G modem operation;
    *) lte - renamed firmware upgrade "path" command to "firmware-file" (CLI only);
    *) lte - reset LTE modem only when SIM slot is changed on dual SIM slot devices;
    *) lte - show alphanumeric value for operator info;
    *) lte - show correct firmware revision after firmware upgrade;
    *) lte - use default APN name "internet" when not provided;
    *) lte - use secondary DNS for DNS server configuration;
    *) ppp - added initial support for Quectel BG96;
    *) proxy - increased minimal free RAM that can not be used for proxy services;
    *) rb4011 - fixed SFP linking (introduced in v6.45beta6);
    *) sfp - fixed S-35LC20D transceiver DDMI readouts after reboot;
    *) smb - fixed possible buffer overflow;
    *) sms - added USSD message functionality under "/tool sms" (CLI only);
    *) sms - allow specifying multiple "allowed-number" values;
    *) sms - fixed long message parsing (introduced in v6.45beta19);
    *) sms - improved delivery report logging;
    *) snmp - added "dot1dStpPortTable" OID;
    *) snmp - properly return multicast and broadcast packet counters for IF-MIB OIDs;
    *) ssh - do not generate host key on configuration export;
    *) ssh - use correct user when "output-to-file" parameter is used;
    *) switch - fixed possible crash when interface state changes and DHCP Snooping is enabled;
    *) switch - properly reapply settings after switch chip reset;
    *) tile - improved link fault detection on SFP+ ports;
    *) wireless - fixed 5GHz interface disappearing after upgrade (introduced in v6.45beta19);
    *) wireless - fixed incorrect IP header for RADIUS accounting packet;
    *) wireless - improved DFS radar detection when using non-ETSI regulated country;
    *) wireless - updated "india" regulatory domain information;
    *) wireless - updated "new zealand" regulatory domain information;
    | "Anyone can build a fast CPU.
    | The trick is to build a fast system."
    |____________Seymour Cray...

  8. #68
    Εγγραφή
    28-03-2006
    Περιοχή
    KV G434
    Ηλικία
    49
    Μηνύματα
    42.180
    Downloads
    23
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    310/31
    ISP
    Cosmote
    DSLAM
    ΟΤΕ - ΕΡΜΟΥ
    Router
    RB4011iGS+5 ONT: G-010G-R
    6.45beta23 changelog:

    Spoiler:
    Changes in this release:

    *) ipsec - properly drop already established tunnel when address change detected;
    *) ipv6 - adjust IPv6 route cache max size based on total RAM memory;
    *) smb - fixed possible buffer overflow;
    | "Anyone can build a fast CPU.
    | The trick is to build a fast system."
    |____________Seymour Cray...

  9. #69
    Εγγραφή
    28-03-2006
    Περιοχή
    KV G434
    Ηλικία
    49
    Μηνύματα
    42.180
    Downloads
    23
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    310/31
    ISP
    Cosmote
    DSLAM
    ΟΤΕ - ΕΡΜΟΥ
    Router
    RB4011iGS+5 ONT: G-010G-R
    H 6.45bet3 λύνει προφανώς το πρόβλημα με το ν6

    6.45beta27 changelog:
    Changes in this release:
    *) dhcpv4-server - fixed commenting option for alerts;
    *) dhcpv6-server - added "address-list" support for bindings (CLI only);
    *) discovery - limit max neighbour count per interface based on total RAM memory;
    *) discovery - improved neighbour's MAC address detection;
    *) fetch - added SFTP support;
    *) ipsec - fixed possible configuration corruption after import;
    *) ipv6 - improved IPv6 neighbor table updating process;
    *) rb2011 - removed "sfp-led" from "System/LEDs" menu;
    *) ssh - added new "ssh-exec" command for non-interactive command execution;
    *) ssh - fixed multiline non-interactive command execution;
    *) wireless - added support for US FCC UNII-2 and Canada country profiles for LHG-5HPnD-US, RBLHG-5HPnD-XL-US and SXTsq5HPnD-US devices;
    Τελευταία επεξεργασία από το μέλος deniSun : 04-04-19 στις 13:31.
    | "Anyone can build a fast CPU.
    | The trick is to build a fast system."
    |____________Seymour Cray...

  10. #70
    Εγγραφή
    28-03-2006
    Περιοχή
    KV G434
    Ηλικία
    49
    Μηνύματα
    42.180
    Downloads
    23
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    310/31
    ISP
    Cosmote
    DSLAM
    ΟΤΕ - ΕΡΜΟΥ
    Router
    RB4011iGS+5 ONT: G-010G-R
    6.45beta31 changelog:
    Spoiler:
    Changes in this release:

    !) dot1x - added support for IEEE 802.1X Port-Based Network Access Control (CLI only);
    *) conntrack - fixed "loose-tcp-tracking" parameter not taken in action (introduced in v6.44);
    *) dhcp - create dual stack queue based on limitations specified on DHCPv4 server lease configuration;
    *) dhcp - do not require lease and binding to have the same configuration for dual-stack queues;
    *) dhcp - show warning in log if lease and binding dual-stack related parameters do not match and create separate queues;
    *) dhcpv4-server - added "client-mac-limit" parameter (CLI only);
    *) dhcpv6-server - added "insert-queue-before" and "parent-queue" parameters (CLI only);
    *) dhcpv6-server - added "route-distance" parameter (CLI only);
    *) dhcpv6-server - fixed binding setting update from RADIUS;
    *) fetch - added SFTP support;
    *) ipsec - added support for RADIUS accounting for "eap-radius" and "pre-shared-key-xauth" authentication methods (CLI only);
    *) ipsec - added traffic statistics to "active-peers" menu (CLI only);
    *) ipsec - general improvements in policy handling;
    *) ipsec - replaced policy SA address parameters with peer setting;
    *) ipsec - use tunnel name for dynamic IPsec peer name;
    *) ipv6 - adjusted IPv6 route cache max size;
    *) lte - fixed session reactivation on R11e-LTE in UMTS mode;
    *) snmp - added "radio-name" (mtxrWlRtabRadioName) OID support;
    *) ssh - added "both", "local" and "remote" options for "forwarding-enabled" parameter;
    *) tunnel - removed "local-address" requirement when "ipsec-secret" is used;
    *) userman - added support for "Delegated-IPv6-Pool";
    *) userman - added support for "Delegated-IPv6-Pool" and "DNS-Server-IPv6-Address" (CLI only);
    *) wireless - improved wireless country settings for EU countries;
    | "Anyone can build a fast CPU.
    | The trick is to build a fast system."
    |____________Seymour Cray...

  11. #71
    Εγγραφή
    13-02-2004
    Περιοχή
    Αθήνα
    Μηνύματα
    17.102
    Downloads
    4
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    200/200 Mbps
    ISP
    Inalan FTTH
    Router
    CRS109-8G-1S-2HnD+HapAC2
    What's new in 6.45beta37 (2019-Apr-25 12:20):

    Κώδικας:
    What's new in 6.45beta37 (2019-Apr-25 12:20):
    
    MAJOR CHANGES IN v6.45:
    ----------------------
    !) dot1x - added support for IEEE 802.1X Port-Based Network Access Control (CLI only);
    !) ike2 - added support for EAP authentication methods (eap-tls, eap-ttls, eap-peap) as initiator (CLI only);
    ----------------------
    
    Changes in this release:
    
    !) dot1x - added support for IEEE 802.1X Port-Based Network Access Control (CLI only);
    !) ike2 - added support for EAP authentication methods (eap-tls, eap-ttls, eap-peap) as initiator (CLI only);
    *) bridge - correctly add interface list as bridge port (introduced in v6.45beta34);
    *) crs3xx - correctly handle switch reset (introduced in v6.45beta34);
    *) ike2 - fixed first child SA generation (introduced in v6.45beta34);
    *) ipsec - general improvements in policy handling;
    *) lte - allow setting empty APN;
    *) supout - added IPv6 ND section to supout file;
    *) tftp - added "max-block-size" parameter under TFTP "settings" menu (CLI only);

  12. #72
    Εγγραφή
    28-03-2006
    Περιοχή
    KV G434
    Ηλικία
    49
    Μηνύματα
    42.180
    Downloads
    23
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    310/31
    ISP
    Cosmote
    DSLAM
    ΟΤΕ - ΕΡΜΟΥ
    Router
    RB4011iGS+5 ONT: G-010G-R
    6.45beta50 changelog:
    Spoiler:
    Changes in this release:

    !) dot1x - added support for IEEE 802.1X Port-Based Network Access Control (CLI only);
    *) bridge - fixed port running state for non-ethernet interfaces (introduced in v6.45beta33);
    *) ccr - improved packet processing after overloading interface;
    *) crs3xx - added ethernet tx-drop counter;
    *) crs3xx - improved switch-chip resource allocation on CRS326, CRS328, CRS305;
    *) defconf - changed default configuration type to AP for cAP series devices;
    *) dhcpv6-client - added option to disable rapid-commit (CLI only);
    *) dhcpv6-server - added RADIUS accounting support with queue based statistics;
    *) discovery - fixed CDP packets not including address on slave ports (introduced in v6.44);
    *) firewall - process packets by firewall when accepted by RAW with disabled connection tracking;
    *) ike2 - fixed pre-shared-key authentication failure (introduced in v6.45beta34);
    *) ike2 - improved certificate verification when multiple CA certificates received from responder;
    *) ippool - improved logging for IPv6 Pool when prefix is already in use;
    *) ipv6 - improved system stability when receiving bogus packets;
    *) lte - improved firmware upgrade process;
    *) ospf - fixed opaque LSA type checking in OSPFv2;
    *) rb3011 - improved system stability when receiving bogus packets;
    *) rb4011 - fixed MAC address duplication between sfp-sfpplus1 and wlan1 interfaces (wlan1 configuration reset required);
    *) snmp - improved reliability on SNMP service packet validation;
    *) ssh - fixed non-interactive multiple command execution;
    *) supout - added "pwr-line" section to supout file;
    *) traceroute - improved stability when sending large ping amounts;
    *) traffic-generator - improved stability when stopping traffic generator;
    | "Anyone can build a fast CPU.
    | The trick is to build a fast system."
    |____________Seymour Cray...

  13. #73
    Εγγραφή
    28-03-2006
    Περιοχή
    KV G434
    Ηλικία
    49
    Μηνύματα
    42.180
    Downloads
    23
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    310/31
    ISP
    Cosmote
    DSLAM
    ΟΤΕ - ΕΡΜΟΥ
    Router
    RB4011iGS+5 ONT: G-010G-R
    6.45beta54 changelog:

    Spoiler:
    Changes in this release:

    !) user - removed insecure password storage;
    *) bridge - correctly display bridge FastPath status when vlan-filtering or dhcp-snooping is used;
    *) conntrack - fixed GRE protocol packet connection-state matching;
    *) crs317 - fixed known multicast flooding to the CPU;
    *) ike1 - general stability improvements (introduced in v6.45beta);
    *) ike2 - added support for IKE rekeying for initiator;
    *) ike2 - improved child SA rekeying process;
    *) lte - added initial support for Vodafone R216-Z;
    *) ovpn - added "verify-server-certificate" parameter for OVPN client (CVE-2018-10066);
    *) winbox - added "System/SwOS" menu for all dual-boot devices;
    *) www - improved client-initiated renegotiation within the SSL and TLS protocols;
    | "Anyone can build a fast CPU.
    | The trick is to build a fast system."
    |____________Seymour Cray...

  14. #74
    Εγγραφή
    13-02-2004
    Περιοχή
    Αθήνα
    Μηνύματα
    17.102
    Downloads
    4
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    200/200 Mbps
    ISP
    Inalan FTTH
    Router
    CRS109-8G-1S-2HnD+HapAC2
    What's new in 6.45beta62 (2019-Jun-13 10:13):

    Important note!!!
    Downgrading to any version prior to v6.43 (v6.42.12 and older) will clear all user passwords and allow password-less authentication. Please secure your router after downgrading.

    Κώδικας:
    MAJOR CHANGES IN v6.45:
    ----------------------
    !) dot1x - added support for IEEE 802.1X Port-Based Network Access Control;
    !) ike2 - added support for EAP authentication methods (eap-tls, eap-ttls, eap-peap, eap-mschapv2) as initiator;
    !) user - removed insecure password storage;
    ----------------------
    
    Changes in this release:
    
    !) dot1x - added support for IEEE 802.1X Port-Based Network Access Control;
    !) ike2 - added support for EAP authentication methods (eap-tls, eap-ttls, eap-peap, eap-mschapv2) as initiator;
    *) bridge - correctly handle bridge host table;
    *) capsman - fixed CAP system upgrading process for MMIPS;
    *) certificate - added "key-type" field;
    *) certificate - added support for ECDSA certificates (prime256v1, secp384r1, secp521r1);
    *) crs3xx - fixed "tx-drop" counter;
    *) defconf - fixed channel width selection for RU locked devices;
    *) dhcpv4-server - added "client-mac-limit" parameter;
    *) dhcpv6-client - added option to disable rapid-commit;
    *) dhcpv6-server - added additional RADIUS parameters for Prefix delegation, "rate-limit" and "life-time";
    *) dhcpv6-server - added "address-list" support for bindings;
    *) dhcpv6-server - added "insert-queue-before" and "parent-queue" parameters;
    *) dhcpv6-server - added RADIUS accounting support with queue based statistics;
    *) dhcpv6-server - added "route-distance" parameter;
    *) e-mail - properly release e-mail sending session if the server's domain name can not be resolved;
    *) ipsec - added dynamic comment field for "active-peers" menu inherited from identity;
    *) ipsec - added "ph2-total" counter to "active-peers" menu;
    *) ipsec - added support for RADIUS accounting for "eap-radius" and "pre-shared-key-xauth" authentication methods;
    *) ipsec - added traffic statistics to "active-peers" menu;
    *) ipsec - disallow setting "src-address" and "dst-address" for transport mode policies;
    *) ipsec - renamed "remote-peers" to "active-peers";
    *) ltap - renamed SIM slots "up" and "down" to "2" and "3";
    *) lte - added passthrough interface subnet selection;
    *) lte - fixed LTE interface running state on RBSXTLTE3-7 (introduced in v6.45beta);
    *) m33g - added support for additional Serial Console port on GPIO headers;
    *) routerboard - renamed 'sim' menu to 'modem';
    *) snmp - fixed "send-trap" not working when "trap-generators" does not contain "temp-exception";
    *) snmp - improved reliability on SNMP service packet validation;
    *) winbox - added "System/SwOS" menu for all dual-boot devices;
    *) winbox - do not allow setting "dns-lookup-interval" to "0";

  15. #75
    Εγγραφή
    28-03-2006
    Περιοχή
    KV G434
    Ηλικία
    49
    Μηνύματα
    42.180
    Downloads
    23
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    310/31
    ISP
    Cosmote
    DSLAM
    ΟΤΕ - ΕΡΜΟΥ
    Router
    RB4011iGS+5 ONT: G-010G-R
    6.46beta9 changelog:
    Changes in this release:

    Spoiler:
    *) bonding - fixed bonding running status after reboot when using other bonds as slave interfaces (introduced in v6.45);
    *) bonding - properly handle MAC addresses when bonding WLAN interfaces;
    *) dhcpv6-server - include "User-Name" parameter in accounting requests;
    *) ipsec - added "connection-mark" parameter for mode-config initiator;
    *) ipsec - allow peer argument only for "encrypt" policies (introduced in v6.45);
    *) ipsec - fixed peer configuration migration from versions older than v6.43 (introduced in v6.45);
    *) ipsec - show warning for policies with "unknown" peer;
    *) ospf - fixed possible busy loop condition when accessing OSPF LSAs;
    *) ppp - disable DTR send when using at-chat;
    *) ssh - do not enable "none-crypto" if "strong-crypto" is enabled on upgrade (introduced in v6.45);
    *) ssh - fixed executed command output printing (introduced in v6.45);
    *) supout - fixed supout file generation outside of internal storage with insufficient space;
    *) upgrade - fixed "auto-upgrade" to use new style authentication (introduced in v6.45);
    *) usb - general USB modem stability improvements;
    *) userman - updated Authorize.Net to use SHA512 hashing;
    *) vlan - fixed "slave" flag for non-running interfaces (introduced in v6.45);
    *) winbox - properly show timestamp in file "Creation Time" field;
    | "Anyone can build a fast CPU.
    | The trick is to build a fast system."
    |____________Seymour Cray...

Σελ. 5 από 9 ΠρώτηΠρώτη ... 34567 ... ΤελευταίαΤελευταία

Παρόμοια Θέματα

  1. Περί ROS ο λόγος...
    Από deniSun στο φόρουμ MikroTik ADSL modems, routers & routerBOARDs
    Μηνύματα: 1163
    Τελευταίο Μήνυμα: 27-03-24, 20:37
  2. Aποστολή και λήψη SMS στο Mikrotik ROS
    Από Nikiforos στο φόρουμ MikroTik ADSL modems, routers & routerBOARDs
    Μηνύματα: 13
    Τελευταίο Μήνυμα: 11-03-22, 17:26
  3. Mikrotik SSTP server
    Από Nikiforos στο φόρουμ MikroTik ADSL modems, routers & routerBOARDs
    Μηνύματα: 31
    Τελευταίο Μήνυμα: 01-12-20, 21:37
  4. Mikrotik x86 vs RB3011UiAS-RM
    Από dimangelid στο φόρουμ MikroTik ADSL modems, routers & routerBOARDs
    Μηνύματα: 9
    Τελευταίο Μήνυμα: 15-07-17, 17:55
  5. Ενεργοποίηση ipv6 σε Mikrotik πίσω απο router παρόχου
    Από georgepapajim στο φόρουμ MikroTik ADSL modems, routers & routerBOARDs
    Μηνύματα: 10
    Τελευταίο Μήνυμα: 24-04-17, 14:20

Bookmarks

Bookmarks

Δικαιώματα - Επιλογές

  • Δεν μπορείτε να δημοσιεύσετε νέα θέματα
  • Δεν μπορείτε να δημοσιεύσετε νέα μηνύματα
  • Δεν μπορείτε να αναρτήσετε συνημμένα
  • Δεν μπορείτε να επεξεργαστείτε τα μηνύματα σας
  •  
  • Τα BB code είναι σε λειτουργία
  • Τα Smilies είναι σε λειτουργία
  • Το [IMG] είναι σε λειτουργία
  • Το [VIDEO] είναι σε λειτουργία
  • Το HTML είναι εκτός λειτουργίας