Mikrotik ROS RC version συζητήσεις-bugs κτλ.

[deniSun]

6.43rc27 changelog:
MAJOR CHANGES IN v6.43:
----------------------

Spoiler:

!) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manua...nitial_login);
!) backup - do not encrypt backup file unless password is provided;
!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
!) cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
!) mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
!) radius - use MS-CHAPv2 for "login" service authentication;
!) romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
!) webfig - improved authentication process;
!) winbox - improved authentication process excluding man-in-the-middle possibility (Winbox v3.14 required);

----------------------

Changes in this release:

Spoiler:

*) dhcpv4-client - fixed DHCP client that was stuck on invalid state;
*) dhcpv4-server - fixed DHCP server that was stuck on invalid state;
*) health - changed "PSU-Voltage" to "PSU-State" for CRS328-4C-20S-4S+;
*) health - fixed incorrect PSU index for CRS328-4C-20S-4S+;
*) ike1 - purge both SAs when timer expires;
*) ipsec - use monotonic timer for SA lifetime check;
*) led - added "dark-mode" functionality for hEX S devices;
*) lte - added additional ID support for SIM7600 modem;
*) lte - added support for Quanta 1k6e modem;
*) lte - improved r11e-LTE and r11e-LTE-US dialling process;
*) lte - improved readings of info command results for the SXT LTE;
*) lte - improved stability of USB LTE interface detection process;
*) ntp - allow to specify link-local address for NTP server;
*) ppp - added support for additional ID for E3531 modem;
*) snmp - added remote CAP count OID for CAPsMAN;
*) snmp - fixed readings for CAPsMAN slave interfaces;
*) usb - fixed power-reset for hAP ac^2 devices;
*) usb - properly detect USB 3.0 flash on RBM33G when jumper is removed;
*) userman - improved unique username generation process when adding batch of users;
*) w60g - added distance measurement (CLI only);
*) w60g - improved link stability;
*) w60g - improved maximum link distance;
*) wireless - improved Nv2 reliability on ARM devices;

[deniSun]

6.43rc29 changelog:
MAJOR CHANGES IN v6.43:
----------------------

Spoiler:

!) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manua...nitial_login);
!) backup - do not encrypt backup file unless password is provided;
!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
!) cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
!) mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
!) radius - use MS-CHAPv2 for "login" service authentication;
!) romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
!) webfig - improved authentication process;
!) winbox - improved authentication process excluding man-in-the-middle possibility (Winbox v3.14 required);

----------------------

Changes in this release:

Spoiler:

*) dhcp - reduced resource usage of DHCP services;
*) ipsec - improved reliability on IPsec hardware encryption for RB1100Dx4;
*) led - added "dark-mode" functionality for SXTsq 5 ac devices;
*) led - use routers uptime as a starting point when turning off LEDs if option was not enabled on boot;
*) sfp - fixed DDM data with SFP+ modules on CRS328-4C-20S-4S+ (introduced in v6.43rc10);
*) sms - do not require "port" and "interface" parameters when sending SMS if already present in configuration;
*) swos - implemented "/system swos" menu that allows to upgrade, reset, save or load configuration and change address for dual-boot CRS devices (CLI only);
*) w60g - improved maximum link distance;
*) w60g - improved RAM memoy allocation processes;
*) wireless - improved Nv2 reliability on ARM devices;

[deniSun]

6.43rc32 changelog:
MAJOR CHANGES IN v6.43:
----------------------

Spoiler:

!) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manua...nitial_login);
!) backup - do not encrypt backup file unless password is provided;
!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
!) cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
!) mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
!) radius - use MS-CHAPv2 for "login" service authentication;
!) romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
!) webfig - improved authentication process;
!) winbox - improved authentication process excluding man-in-the-middle possibility;

----------------------

Changes in this release

Spoiler:

!) winbox - minimal required version is v3.15;
*) api - properly classify API sessions in log;
*) bridge - improved performance when bridge VLAN filtering is used without hardware offloading;
*) chr - enabled promiscious mode (requires to be enabled on host as well) when running CHR on Hyper-V;
*) crs317 - fixed Ethernet inteface stuck on 100 Mbps speed;
*) crs328 - fixed transmit on sfp-sfpplus1 and sfp-sfpplus2 interfaces;
*) crs3xx - do not report SFP interface as running when interface on opposite side is disabled;
*) dude - fixed client auto upgrade (broken since 6.43rc17);
*) export - do not show w60g password on "hide-sensitive" type of export;
*) log - fixed false log warnings about system status after power on for CRS328-4C-20S-4S+;
*) lte - show UICC in correct format for SXT LTE devices;
*) romon - properly classify RoMON sessions in log and active users list;
*) w60g - improved maximal achievable distance;
*) w60g - properly report center status under "tx-sector-info";

[deniSun]

6.43rc34 changelog:
MAJOR CHANGES IN v6.43:
----------------------

Spoiler:

!) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manua...nitial_login);
!) backup - do not encrypt backup file unless password is provided;
!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
!) cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
!) mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
!) radius - use MS-CHAPv2 for "login" service authentication;
!) romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
!) webfig - improved authentication process;
!) winbox - improved authentication process excluding man-in-the-middle possibility;
!) winbox - minimal required version is v3.15;

----------------------

Changes in this release

Spoiler:

!) cloud - added IPv6 support;
*) console - do not show spare parameters on ping command;
*) crs317 - properly report link state when one link interface is disabled;
*) crs326/crs328 - fixed broken "new-dst-port" ACL rules (introduced in 6.43rc10);
*) crs3xx - fixed flow control;
*) crs3xx - fixed LACP member failover;
*) dhcpv4-client - fixed double ACK packet handling;
*) ethernet - do not show "combo-state" field if interface is not SFP or copper;
*) led - fixed LED default configuration for LtAP mini;
*) lte - added eNB ID to info command;
*) ssh - allow to use "diffie-hellman-group1-sha1" on TILE and x86 devices with "strong-crypto" disabled;
*) supout - added "w60g" section to supout file;
*) watchdog - added "ping-timeout" setting (CLI only);
*) winbox - show "sector-writes" on ARM routers that has such counters;
*) winbox - show "System/Health" only on boards that have health monitoring;

[Nikiforos]

καλησπέρα και καλο μηνα!
την Παρασκευη εβαλα στο 109 την τελευταια εκδοση της RC, ολα καλα.....πηγα εξοχικο το Σαββατο ολα ωραια και καλα.
Την Κυριακη το πρωι σημερα δλδ βλεπω το linksys pap2 να εχει σβησει ενα led, οποτε OFF το VOIP, τελικα βλεπω δεν μπορω να μπω στην καμερα μου στην Αθηνα, δεν μπορω να μπω απο το κινητο με openvpn και δεν συνδεεται και το openvpn client απο το 951 με την κινητη στο εξοχικο.
Τελικα τωρα το κοιταξα και τι να δω....το mikrotik ip cloud να εχει μεινει στην παλια ip! κλεινω ανοιγω το pppoe μπας και, τιποτα εκει στην παλια!
το κλεινω και το ip cloud το ανοιγω τα ιδια!
δοκιμαζω με το noip ονομα μου που τρεχει στο nas server ολα καλα απο το κινητο μπαινω κανονικα.

Καμια ιδεα κανεις? φταιει τωρα η RC αραγες? εχει τυχει σε κανεναν να κολλησει το ip cloud ?
να πω οτι απο το μενου την δειχνει σωστα και οτι εχει κανει update, αλλα αν πας να φτασεις το ονομα δειχνει μια παλια ip που ειχα!!!

- - - Updated - - -

Εκανα reboot πηρε αλλη ip το pppoe client και την δειχνει στο ip cloud κανονικα, αλλα οταν παω να συνδεθω στο ονομα παλι δειχνει την ιδια παλια ip που ειχα χτες!!!!

[K1m0n]

Για το cloud της tik δεν έχω άποψη, δεν το χρησιμοποιώ.
Απ'ότι διάβαζα στο forum τους ετοιμάζουν καινούργιο cloud, ίσως να σχετίζεται αυτό.
Με αυτά που έχω πάθει κατά καιρούς όμως με τις RC (αλλά και με τις stable),
αν η rc δεν διορθώνει κάποιο bug που καίγομαι παραμένω μόνιμα σε bugfix channel.
πχ, μου έχει τύχει να κάνω update και να χάσει τις μισές ρυθμίσεις.

[Nikiforos]

Τα διαβασα, η αλλαγη αυτη ειναι πολλες μερες πισω τον μισο Ιουνη.
Απο την αλλη ομως επειδη δεν ειχα γραμμη σταθερου δεν ειχα κανει αναβαθμιση και ειχα μεινει εκτος απο τις 2 ιουνιου!
οποτε μπορει να εχει σχεση.
Οσο για να χασιμο ρυθμισεων γιαυτο παιρνουμε και backup και αρχειο και τις εντολες απο τα exports.

Eπειδη ειμαι πνιγμενος και δεν εχω χρονο για ψαξιματα και παιχνιδια θα γυρισω στην current αν παιζει εκει μενω εκει και τελος η RC λογω παντελους ελλειψης χρονου.

- - - Updated - - -

Οκ το γυρισα στην current και το fw, τωρα δεν κανει αυτο απλα βγαζει στο update Error: request timed out καλα παμε....

- - - Updated - - -

Τελικα μετα απο καμια 30αρια updates το πηρε και παιζει κανονικα πλεον, αρα κατι τρεχει στην RC με το ip cloud και πρεπει να εχει να κανει με την αλλαγη που εκαναν.

- - - Updated - - -

Τα σχετικα εδω : https://forum.mikrotik.com/viewtopic.php?t=135603

[deniSun]

6.43rc40 changelog:
MAJOR CHANGES IN v6.43:
----------------------

Spoiler:

!) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manua...nitial_login);
!) backup - do not encrypt backup file unless password is provided;
!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
!) cloud - added IPv6 support;
!) cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
!) mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
!) radius - use MS-CHAPv2 for "login" service authentication;
!) romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
!) webfig - improved authentication process;
!) winbox - improved authentication process excluding man-in-the-middle possibility;
!) winbox - minimal required version is v3.15;

----------------------

Changes in this release

Spoiler:

!) cloud - added support for licensed CHR instances (including trial);
*) bridge - properly handle packets when bridge port changes states
*) crs317 - properly report link state when one side has disabled interface;
*) ethernet - properly handle Ethernet interface default configuration;
*) ike2 - use "/32" netmask by default on initiator if not provided by responder;
*) package - do not allow to install out of bundle package if it already exists within bundle;
*) package - free up used storage space consumed by old RouterOS upgrades;
*) package - renamed "current-version" to "installed-version" under "/system package install";
*) sms - converted "keep-max-sms" feature to "auto-erase";
*) snmp - added CAPsMAN "remote-cap" table;
*) supout - added "ip-cloud" section to supout file;
*) usb - fixed modem initialisation on LtAP mini;
*) userman - fixed compatibility with PayPal TLS 1.2;
*) w60g - do not reset interface after adding comment;
*) watchdog - added "ping-timeout" setting;
*) winbox - show "sector-writes" on devices that have such counters;
*) winbox - show "Switch" menu on hAP ac^2 devices;

[deniSun]

6.43rc44 changelog:
MAJOR CHANGES IN v6.43:
----------------------

Spoiler:

!) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manua...nitial_login);
!) backup - do not encrypt backup file unless password is provided;
!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
!) cloud - added IPv6 support;
!) cloud - added support for licensed CHR instances (including trial);
!) cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after installation process);
!) mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
!) radius - use MS-CHAPv2 for "login" service authentication;
!) romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
!) webfig - improved authentication process;
!) winbox - improved authentication process excluding man-in-the-middle possibility;
!) winbox - minimal required version is v3.15;

----------------------

Changes in this release:

Spoiler:

*) backup - added support for new backup file encryption (AES128-CTR) with signatures (SHA256);
*) crs326/crs328 - fixed untagged packet forwarding through tagged ports when pvid=1;
*) crs3xx - fixed tagged packet forwarding in 802.1ad aware bridges (introduced in 6.43rc13);
*) dhcpv6 - improved reliability on IPv6 DHCP services;
*) lte - added support for alternative SIM7600 PID;
*) sms - improved reliability on SMS reader;
*) w60g - temporary disabled distance measurement feature;

[deniSun]

6.43rc45 changelog:

Spoiler:

*) ethernet - improved stability when changing ethernet interface L2MTU on CRS328-24P-4S+ (introduced in v6.43rc11);
*) ipsec - improved invalid policy handling when a valid policy is uninstalled;
*) lte - added additional ID support for SIM7600 modem;
*) sfp - fixed default advertised link speeds;
*) vrrp - fixed VRRP packet processing on VirtualBox and VMWare hypervisors;
*) winbox - properly display all flags for bridge host entries;
*) winbox - show "System/RouterBOARD/Mode Button" on devices that has such feature;
*) wireless - improved Nv2 reliability on ARM devices;

[deniSun]

6.43rc51 changelog:

Spoiler:

*) bridge - added per-port based "tag-stacking" feature;
*) bridge - fixed "ingress-filtering", "frame-types" and "tag-stacking" value storing;
*) bridge - improved bridge port state changing process;
*) bridge - improved packet processing when bridge port changes states;
*) bridge - renamed option "vlan-protocol" to "ether-type";
*) certificate - do not allow to perform "undo" on certificate changes;
*) crs3xx - added command that forces fan detection on fan-equipped devices;
*) crs3xx - fixed port disable on CRS326 and CRS328 devices;
*) dhcpv6-client - allow to set "default-route-distance";
*) dhcpv6-client - fixed "add-default-route" parameter;
*) dhcpv6-client - fixed option handling;
*) dhcpv6-server - added additional RADIUS parameters for Prefix delegation, "rate-limit" and "life-time";
*) ethernet - fixed default ethernet advertise values after configuration reset (introduced in v6.43rc33)
*) filesystem - fixed NAND memory going into read-only mode (requires "factory-firmware" >= 3.41.1 and "current-firmware" >= 6.43);
*) health - fixed voltage measurements for RB493G devices;
*) hotspot - allow to properly configure Hotspot directory on external disk for devices that have flash type storage;
*) hotspot - fixed RADIUS CoA & PoD by allowing to accept "NAS-Port-Id";
*) ike1 - added unsafe configuration warning for main mode with pre-shared-key authentication;
*) ike1 - zero out reserved bytes in NAT-OA payload;
*) ike2 - fixed rekeyed child deletion during another exchange;
*) ike2 - improved basic exchange logging readability;
*) ipsec - fixed "sa-src-address" deduction from "src-address" in tunnel mode;
*) ipsec - fixed "static-dns" value storing (CLI only);
*) ipsec - fixed AES-CTR and AES-GCM key size proposing as initiator;
*) ldp - properly load LDP configuration;
*) led - fixed default LED configuration for RBLHGG-5acD-XL devices;
*) lte - added "registration-status" parameter under "/interface lte info" command;
*) lte - added additional D-Link PIDs;
*) lte - added additional low endpoint SIM7600 PIDs;
*) lte - added signal readings under "/interface lte scan" for 3G and GSM modes;
*) lte - fixed memory leak on USB disconnect;
*) lte - fixed SMS send feature when not in LTE network;
*) lte - ignore empty MAC addresses during Passthrough discovery phase;
*) lte - properly detect interface state when running for IPv6 only connection for R11e-LTE modem;
*) multicast - allow to add more than one RP per IP address for PIM;
*) ospf - improved link-local LSA flooding;
*) rb1100ahx4 - added DES and 3DES hardware acceleration support;
*) routerboot - removed RAM test from TILE devices (routerboot upgrade required);
*) sfp - hide "sfp-wavelength" parameter for RJ45 transceivers;
*) snmp - added "phy-rate" reading for "station-bridge" mode;
*) snmp - fixed "remote-cap" peer MAC address format;
*) ssh - strengthen strong-crypto (add aes-128-ctr and disallow hmac sha1 and groups with sha1);
*) tile - added DES and 3DES hardware acceleration support;
*) w60g - added distance measurement feature;
*) w60g - fixed random disconnects;
*) w60g - improved MCS rate detection process;
*) w60g - improved MTU change handling;
*) w60g - properly close connection with station on disconnect;
*) wireless - fixed "/interface wireless sniffer packet print follow" output;
*) wireless - fixed packet processing after removing wireless interface from CAP settings;

[deniSun]

6.43rc56 changelog:

Spoiler:

*) bridge - added support for BPDU Guard (CLI only);
*) bridge - added support for DHCP Option 82 (disables hardware offloading, CLI only);
*) bridge - added support for DHCP Snooping (disables hardware offloading, CLI only);
*) bridge - forward LACPDUs when "protocol-mode=none";
*) bridge - improved packet handling;
*) cloud - added simultaneous IPv4/IPv6 support;
*) console - added "dont-require-permissions" parameter for scripts;
*) dhcpv4-relay - fixed false invalid flag presence;
*) dhcpv6-server - do not allow to run DHCPv6 server on slave interface;
*) dhcpv6-server - fixed dynamic simple queue creation for RADIUS bindings;
*) dhcpv6-server - properly update interface for dynamic DHCPv6 servers;
*) ethernet - fixed possible link flaps after disabling/enabling the interface (introduced in v6.43rc51);
*) ethernet - improved large packet handling on ARM devices with wireless;
*) ethernet - removed obsolete slave flag from "/interface vlan" menu;
*) hotspot - fixed customized HTML file usage (introduced in 6.43rc47);
*) ike1 - zero out reserved bytes in NAT-OA payload;
*) ike2 - fixed initiator first policy selection;
*) ippool - improved used address error message;
*) ipsec - added warning messages for incorrect peer configuration;
*) ipsec - separate phase1 proposal configuration from peer menu;
*) ppp - fixed interface enabling after a while if none of them where active;
*) ppp - improved modem mode switching;
*) snmp - added "temp-exception" trap;
*) switch - fixed possible switch chip hangs after initialization on MediaTek and Atheros8327 switch chips;
*) tile - fixed false HW offloading flag for MPLS;
*) tr069-client - allow editing of "provisioning-code" attribute (CLI only);
*) tr069-client - fixed unresponsive tr069 service when blackhole route is present;
*) upgrade - fixed RouterOS upgrade process from RouterOS v5;
*) ups - improved UPS serial parsing stability;
*) w60g - general stability and performance improvements;
*) w60g - stop doing distance measurements after first successful measurement;
*) winbox - added "default-route-distance" parameter for "IPv6/DHCP-client" menu;
*) winbox - fixed "sfp-connector-type" value presence under "Interface/Ethernet";
*) winbox - fixed warning presence for "IP/IPsec/Peers" menu;
*) winbox - fixed "write-sect-since-reboot" value presence under "System/Resources";
*) winbox - show "System/RouterBOARD/Mode Button" on devices that has such feature;
*) wireless - added option to disable PMKID for WPA2 (CLI only);
*) wireless - fixed memory leak when performing wireless scan on ARM;
*) wireless - updated "united-states" regulatory domain information;

[deniSun]

6.43rc64 changelog:

Spoiler:

Changes in this release:

*) bridge - added an option to manually specify ports that have a multicast router (CLI only);
*) bridge - added a warning when untrusted port receives a DHCP Server message when DCHP Snooping is enabled;
*) bridge - added more options to fine-tune IGMP Snooping enabled bridges (CLI only);
*) bridge - added support for DHCP Option 82 (CLI only);
*) bridge - added support for DHCP Snooping (CLI only);
*) bridge - added support for IGMP Snooping fast-leave feature (CLI only);
*) cloud - close local UDP port if no activity;
*) console - made "once" parameter mandatory when using "as-value" on "monitor" commands;
*) console - removed automatic swapping of "from=" and "to=" in "for" loops;
*) crs326/crs328 - fixed packet forwarding when port changes states with IGMP Snooping enabled;
*) crs3xx - added hardware support for DHCP Snooping and Option 82;
*) crs3xx - fixed packet forwarding when "frame-type" is changed (introduced in v6.43rc51);
*) crs3xx - fixed SwOS config import;
*) defconf - fixed default configuration for RBSXTsq5nD;
*) dhcpv6-client - fixed false invalid flag (introduced in v6.43rc56);
*) fetch - added "as-value" output format;
*) fetch - fixed address and DNS verification in certificates;
*) health - added missing parameters from export;
*) ipsec - added warning messages for incorrect peer configuration;
*) ipsec - improved stability when using IPsec with disabled route cache;
*) leds - fixed LED behaviour when bonding is configured on SFP+ interfaces;
*) lte - added "sector-id" to info command;
*) lte - fixed SIM7600 series module support with newer device IDs;
*) ppp - added support for Alfa Network U4G modem;
*) rb3011 - added IPsec hardware acceleration support;
*) snmp - added EAP identity to CAPsMAN registration table;
*) supout - added monitored bridge VLAN table to supout file;
*) switch - added CPU Flow Control settings for devices with a Atheros8227, QCA8337, Atheros8327, Atheros7240 or Atheros8316 switch chips;
*) tr069-client - use SNI extension for HTTPS;
*) ups - improved UPS serial parsing stability;
*) w60g - added "beamforming-event" stats counter;
*) w60g - fixed random disconnects;
*) w60g - general stability and performance improvements;
*) wireless - accept only valid path for sniffer output file parameter;
*) wireless - added "czech republic 5.8" regulatory domain information;
*) wireless - added "etsi2" regulatory domain information;
*) wireless - added option to disable PMKID for WPA2;
*) wireless - updated "czech republic" regulatory domain information;

[deniSun]

6.43rc66 changelog:

Spoiler:

Changes in this release:

*) bridge - added support for BPDU Guard;
*) bridge - added support for DHCP Snooping;
*) bridge - ignore tagged BPDUs when bridge VLAN filtering is used;
*) certificate - fixed RA "server-url" setting;
*) console - added "dont-require-permissions" parameter for scripts;
*) dhcpv6-client - improved dynamic IPv6 pool addition process;
*) ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations;
*) ipsec - fixed AES-192-CTR fallback to software AEAD on ARM devices with wireless and RB3011UiAS-RM;
*) ipsec - fixed "static-dns" value storing;
*) ipsec - improved invalid policy handling when a valid policy is uninstalled;
*) ipsec - separate phase1 proposal configuration from peer menu;
*) l2tp - allow setting "max-mtu" and "max-mru" bigger than 1500;
*) lte - fixed LTE registration in 2G/3G mode;
*) ppp - added support for Telit LM940 modem;
*) rb3011 - added IPsec hardware acceleration support;
*) snmp - fixed interface speed reporting for predefined rates;
*) supout - added "files" section to supout file;
*) switch - added CPU Flow Control settings for devices with a Atheros8227, QCA8337, Atheros8327, Atheros7240 or Atheros8316 switch chip;
*) tr069-client - allow editing of "provisioning-code" attribute;
*) userman - fixed "shared-secret" parameter requiring "sensitive" policy;
*) webfig - fixed www service becoming unresponsive;
*) winbox - added "tag-stacking" option to "Bridge/Ports";
*) winbox - fixed "bad-blocks" value presence under "System/Resources";
*) winbox - fixed "IP/IPsec/Peers" section sorting;
*) winbox - renamed "VLAN Protocol" to "EtherType" under bridge interface "VLAN" tab;
*) winbox - show "System/RouterBOARD/Mode Button" on devices that has such feature;
*) wireless - accept only valid path for sniffer output file parameter;
*) wireless - require "sniff" policy for wireless sniffer;

[deniSun]

6.44beta9 changelog:
MAJOR CHANGES IN v6.44:
----------------------
!) upgrade - release channels renamed - "bugfix" to "long-term", "current" to "stable" and "release candidate" to "testing";
!) upgrade - "testing" release channel now can contain "beta" together with "release-candidate" versions;
----------------------

Changes in this release:

Spoiler:

!) cloud - added command "/system backup cloud" for backup storing on cloud (CLI only);
*) bridge - improved packet handling when hardware offloading is being disabled;
*) cloud - ignore "force-update" command if DDNS is disabled;
*) crs3xx - fixed possible memory leak when disabling bridge interface;
*) defconf - properly clear global variables when generating default configuration after RouterOS upgrade;
*) discovery - properly use Sytem ID for "software-id" value on CHR;
*) e-mail - added info log message when e-mail is sent successfully;
*) lte - fixed LTE interface not working properly after reboot on RBSXTLTE3-7;
*) proxy - removed port list size limit;
*) romon - improved reliability when processing RoMON packets on CHR;
*) routerboard - show "boot-os" option only on devices that have such feature;
*) switch - fixed port mirroring on devices that do not support CPU Flow Control;
*) webfig - allow to change user name when creating a new system user;
*) webfig - fixed time interval settings not applied properly under "IP/Kid Control/Kids" menu;
*) winbox - added 4th chain selection for "HT TX chains" and "HT RX chains" under "CAPsMAN/CAP Interface/Wireless" tab;
*) winbox - added "allow-dual-stack-queue" setting to "IP/DHCP Server/Leases" menu;
*) winbox - added "allow-dual-stack-queue" setting to "IPv6/DHCPv6 Server/Bindings" menu;
*) winbox - added "radio-name" setting to "CAPsMAN/CAP Interface/General" tab;
*) winbox - added "secondary-channel" setting to "CAPsMAN/CAP Interface/Channel" tab;
*) winbox - fixed corrupt user database after specifying allowed address range (introduced in v6.43);
*) winbox - make bridge port "untrusted" by default when creating new port;
*) winbox - show "IP/Cloud" menu on CHR;
*) winbox - show "System/RouterBOARD/Mode Button" on devices that have such feature;