Mikrotik RouterOS v7 beta

[helpme]

βγήκε firm για 5g ειδικά για Cosmote για Chateau 5G RG502QEAAAR11A06M4G_01.001.01.001
17b2
λάθος, έκανα search όλο το όνομα και δε μου το έβγαλε.

[deniSun]

βγήκε firm για 5g ειδικά για Cosmote για Chateau 5G RG502QEAAAR11A06M4G_01.001.01.001
17b2

Το έχουμε αναφέρει σε προηγούμενο μήνυμα.

[helpme]

*) lte - added option to check/install modem firmware from early-access/testing channel (CLI only);

στο CLI αν πας στο testing channel σου βγάζει το τελευταίο firm της 7.16

/interface/lte> firmware-upgrade update-channel=testing
number: lte1
  installed: RG502QEAAAR11A06M4G              
     latest: RG502QEAAAR13A03M4G_02.003.02.003

ενώ στο stable γράφει πως για cosmote είναι η RG502QEAAAR11A06M4G

/interface/lte> firmware-upgrade update-channel=stable 
number: lte1
  installed: RG502QEAAAR11A06M4G                                                >
     latest: RG502QEAAAR11A06M4G                                                >
       note: Stable release for current network, for other options please see "u>

[BillyVan]

What's new in 7.17beta4 (2024-Oct-18 11:32):

Spoiler:

!) device-mode - after upgrade, mode "enterprise" is renamed to "advanced" and bandwidth-test, traffic-gen, partition (command "repartition"), bootloader and downgrade features will be disabled;
!) webfig - redesigned HTML, styling and functionality (additional fixes);
*) arm64 - fixed for bare-metal servers to be able to access more than 2GB RAM;
*) arm64 - show CPU frequency on bare-metal installations;
*) bridge - correctly display PPP interfaces in VLAN menu;
*) bridge - fixed first host table response for SNMP;
*) bridge - fixed VLAN overlap check;
*) bridge - improved port handling;
*) certificate - fixed handling of capsman-cap certificates (introduced in v7.16);
*) console - added more argument definitions for mac-protocol property;
*) console - execute :return command without error;
*) crypto - improve crypto speeds (additional fixes);
*) crypto - use hardware accelerator for GCM cipher in TLS connection on Alpine CPUs;
*) defconf - changed wireless installation from "indoor" to "any";
*) defconf - disable 5GHz secondary channel on RB4011;
*) defconf - fixed new port name recognition;
*) device-mode - changed "partition" to allow activate and do not allow repartition (introduced in v7.17beta2);
*) device-mode - clarify message that pressing a button will reboot device;
*) device-mode - limit "/tool/ping-speed" and "/tool/flood-ping" under "traffic-gen" feature;
*) device-mode - show all features and active restrictions with "print" command;
*) dhcp-relay - added "local-address-as-src-ip" property;
*) dhcp-server - use interface ID for NAS-Port and added interface name to NAS-Port-ID attribute in RADIUS requests;
*) dhcp-server - use single RADIUS accounting session for IPv4 and IPv6 when dual stack is used;
*) dhcpv4-client - fixed crash when releasing disabled DHCP client;
*) dhcpv4-server - properly detect DHCP server address when underlying interface has multiple IP addresses configured;
*) dhcpv4-server/relay - added additional error messages for DHCP servers and relays;
*) discovery - added support for LLDP DCBX (additional fixes);
*) disk - added sshfs client to "/disk" menu (CLI only);
*) disk - improve slot naming and improvements for visualizing complex hardware topology;
*) disk - improve test to report zero byte iops;
*) disk - save raid superblock and raid bitmap superblock on member devices in 1.2 format/location;
*) disk - try all NFS versions (4.2,4.1,4.0,3,2) when mounting NFS in that order;
*) dns - added option to create named DNS servers that can be used as forward-to servers (CLI only) (additional fixes);
*) dns - do not look up local cache when executing ":resolve" command with specified "server" parameter (introduced in v7.16);
*) dns - refactored DNS service internal processes;
*) ethernet - log warning only about excessive broadcast (do not include multicast) and reduced log count;
*) file - do not needlessly scan large filesystems, could prevent unmounting;
*) graphing - fixed graphing rule removal (additional fixes);
*) health - changed PSU state from "no-ac" to "no-input";
*) igmp-proxy - refactored IGMP querier (additional fixes);
*) iot - fixed duplicate LoRa payloads in the traffic tab;
*) iot - limit mqtt publish message size to 32 KB;
*) iot - LoRa traffic tab RSSI now shows proper values for ARM architecture;
*) iot - mqtt improvement to support large payloads and gracefully discard payloads above size limit;
*) iot - removed some LoRa radio related parameters (e.g. RSSI-OFF and Tx-enabled) that were not meant to be changed (additional fixes);
*) ipv6 - added comment property to "/ipv6/nd/prefix" menu;
*) l3hw - improved system stability;
*) l3hw - rate limit error logging;
*) log - added hostname support to remote logging action;
*) log - added regex parameter for log filtering in rules;
*) lte - fixed "default-name" property in export when multiple LTE interfaces are used;
*) lte - fixed "lte monitor" signal reporting for RG520F-EU modem when connected to 5G SA network;
*) lte - fixed "operator" setting for EC200A-EU modem;
*) lte - fixed LTE band setting for SXT LTE 3-7;
*) lte - fixed roaming barring (allow-roaming=no) for EC200A-EU modem;
*) lte - set IPv6 address reporting format in modem init for AT modems and MBIM modems with AT channel;
*) mac-server - allow MAC-Telnet access through any bridged port when bridge interface is allowed;
*) mpls - added fast-path support for VPLS (additional fixes);
*) netwatch - added "ignore-initial-up" and "ignore-initial-down" properties (CLI only);
*) netwatch - fixed probe toggle when adding a comment;
*) ovpn-server - added "user-auth-method" property and allow mschap2 for RADIUS authentication;
*) ppp - added support for bridge-port-pvid configuration via ppp profile (additional fixes);
*) ppp - reuse link-local IPv6 address for static bindings when possible;
*) pppoe - added support for PPPoE server over 802.1Q VLANs (additional fixes);
*) ptp - added PTP support for CRS320-8P-8B-4S+ device;
*) ptp - make PTP process more stable and deterministic when applying configuration;
*) qos-hw - improved PFC behavior (additional fixes);
*) qos-hw - improved WRED and ECN behavior (additional fixes);
*) qos-hw - reworked PCP and DSCP mapping (now supports single, multiple and range values, previous configuration with minimal value mapping is converted to a single value);
*) rip - improved stability when changing metric;
*) route - fixed minor typo in failure message;
*) route - increased interface name length limit in log messages;
*) route - removed possibility for IPv6 routes to specify interface in the dst-address;
*) routerboot - fixed boot MAC for devices with Alpine CPU ("/system routerboard upgrade" required);
*) sfp - improved initialization for certain SFP modules on CRS309 and CRS317 devices ("/system routerboard upgrade" required);
*) smb - stability improvements for client/server (additional fixes);
*) snmp - added wifi fields to MIKROTIK-MIB;
*) ssh - added option to configure SSH ciphers (replaced allow-none-crypto parameter);
*) ssh - improved speed;
*) ssh - prefer GCM ciphers for arm64 and x86 devices when ciphers=auto;
*) storage - preserve permissions,owners,attributes when syncing under "/file/sync";
*) storage,rsync - fixed to work with clients passing "-a" option;
*) supout - added device-mode section;
*) switch - updated dynamic switch rules when using HW bridge with IGMP snooping (224.0.0.0/24 and ff02::/16 destination addresses are forwarded and copied to CPU) (additional fixes);
*) system - moved "/system/upgrade" to "/system/package/local-update";
*) vxlan - fixed issue causing to loose IPv6 VTEP address setting;
*) webfig - improved keyboard navigation (additional fixes);
*) webfig - reduce flickering when table is sorted by column with duplicate values (additional fixes);
*) wifi - added extra info to CAPsMAN about message;
*) wifi - fixed "disabled" property in certain cases;
*) wifi - fixed occasional failure to bring up management frame protection and channel switch capabilities;
*) wifi - improved FT roaming with WPA3 for some Apple devices;
*) wifi-qcom - updated regulatory info for Ukraine, Australia and United States;
*) winbox - renamed and moved "System/Auto Upgrade" to "System/Packages" menu;
*) winbox - show MLAG settings for CRS326-4C+20G+2Q+ device;
*) wireless - enable all chains by default for RB911 and RB922 series devices;

[deniSun]

[pwn1]

στο CLI αν πας στο testing channel σου βγάζει το τελευταίο firm της 7.16

/interface/lte> firmware-upgrade update-channel=testing
number: lte1
  installed: RG502QEAAAR11A06M4G              
     latest: RG502QEAAAR13A03M4G_02.003.02.003

ενώ στο stable γράφει πως για cosmote είναι η RG502QEAAAR11A06M4G

/interface/lte> firmware-upgrade update-channel=stable 
number: lte1
  installed: RG502QEAAAR11A06M4G                                                >
     latest: RG502QEAAAR11A06M4G                                                >
       note: Stable release for current network, for other options please see "u>

Καλησπέρα,

σε ένα Chateau 5G AX (S53UG+M-5HaxD2HaxD) που τρέχει την 7.17beta4 (testing) και έχει modem firmware το RG502QEAAAR11A06M4G (Queltec RG502Q-EA) βλέπω τα παρακάτω:

> /interface/lte/firmware-upgrade update-channel=testing
number: lte1
  installed: RG502QEAAAR11A06M4G                                                                     
     latest: RG502QEAAAR11A06M4G                                                                     
       note: Stable release for current network, for other options please see "update-channel" option
> 
> /interface/lte/firmware-upgrade update-channel=stable 
number: lte1
  installed: RG502QEAAAR11A06M4G                                                                     
     latest: RG502QEAAAR11A06M4G                                                                     
       note: Stable release for current network, for other options please see "update-channel" option

Ερώτηση: η τελευταία έκδοση είναι η RG502QEAAAR11A06M4G ή μήπως η RG502QEAAAR13A03M4G είναι νεότερη ??

Πάντως με την RG502QEAAAR11A06M4G έχω πολλές αποσυνδέσεις του lte (1-2 κάθε ημέρα).

[BillyVan]

Διαβασε τα παραπανω μηνυματα.

*) lte - added provider specific firmware update (FOTA) for Cosmote GR networks on Chateau 5G;

Για την κοσμοτε και καλα εβγαλαν αυτο που βλεπεις αν βαλεις την 7.x.x beta.

Υποβαθμιση το καταλαβαινω εγω.

Ιδια συμπεριφορα εχω και με τις 2 εκδοσεις που αναφερεις.

[pwn1]

Ιδια συμπεριφορα εχω και με τις 2 εκδοσεις που αναφερεις.

Μπορεις να μου πεις τι δειχνει το log σου όταν έχεις αποσυνδέσεις ?
Πέφτει το lte1 και επανέρχεται μόνο του ή πρέπει να το κάνεις reboot ?

Σε εμένα εμφανίζει τα παρακάτω:

Oct/28/2024 12:24:46 interface,info lte1 link down
Oct/28/2024 12:24:47 lte,error lte1 mbim: >>> E #24 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:24:48 lte,error lte1 mbim: >>> E #25 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:24:49 lte,error lte1 mbim: >>> E #26 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:24:50 lte,error lte1 mbim: >>> E #27 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:24:52 lte,error lte1 mbim: >>> E #28 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:24:53 lte,error lte1 mbim: >>> E #29 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:24:54 lte,error lte1 mbim: >>> E #30 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:24:55 lte,error lte1 mbim: >>> E #31 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:24:56 lte,error lte1 mbim: >>> E #32 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:24:57 lte,error lte1 mbim: >>> E #33 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:24:58 lte,error lte1 mbim: >>> E #34 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:24:59 lte,error lte1 mbim: >>> E #35 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:00 lte,error lte1 mbim: >>> E #36 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:01 lte,error lte1 mbim: >>> E #37 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:02 lte,error lte1 mbim: >>> E #38 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:03 lte,error lte1 mbim: >>> E #39 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:04 lte,error lte1 mbim: >>> E #40 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:05 lte,error lte1 mbim: >>> E #41 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:06 lte,error lte1 mbim: >>> E #42 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:07 lte,error lte1 mbim: >>> E #43 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:08 lte,error lte1 mbim: >>> E #44 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:09 lte,error lte1 mbim: >>> E #45 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:10 lte,error lte1 mbim: >>> E #46 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:11 lte,error lte1 mbim: >>> E #47 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:12 lte,error lte1 mbim: >>> E #48 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:13 lte,error lte1 mbim: >>> E #49 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:14 lte,error lte1 mbim: >>> E #50 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:15 lte,error lte1 mbim: >>> E #51 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:16 lte,error lte1 mbim: >>> E #52 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:17 lte,error lte1 mbim: >>> E #53 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:18 lte,error lte1 mbim: >>> E #54 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:19 lte,error lte1 mbim: >>> E #55 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:20 lte,error lte1 mbim: >>> E #56 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:21 lte,error lte1 mbim: >>> E #57 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:22 lte,error lte1 mbim: >>> E #58 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:23 lte,error lte1 mbim: >>> E #59 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:24 lte,error lte1 mbim: >>> E #60 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:25 lte,error lte1 mbim: >>> E #61 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:26 lte,error lte1 mbim: >>> E #62 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:27 lte,error lte1 mbim: >>> E #63 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:28 lte,error lte1 mbim: >>> E #64 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:29 lte,error lte1 mbim: >>> E #65 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:30 lte,error lte1 mbim: >>> E #66 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:31 lte,error lte1 mbim: >>> E #67 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:32 lte,error lte1 mbim: >>> E #68 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:34 lte,error lte1 mbim: >>> E #69 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:35 lte,error lte1 mbim: >>> E #70 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:36 lte,error lte1 mbim: >>> E #71 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:37 lte,error lte1 mbim: >>> E #72 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:38 lte,error lte1 mbim: >>> E #73 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:39 lte,error lte1 mbim: >>> E #74 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:40 lte,error lte1 mbim: >>> E #75 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:41 lte,error lte1 mbim: >>> E #76 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:42 lte,error lte1 mbim: >>> E #77 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:43 lte,error lte1 mbim: >>> E #78 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:44 lte,error lte1 mbim: >>> E #79 - connect: connect, error: MAX_ACTIVATED_CONTEXTS
Oct/28/2024 12:25:44 watchdog,error,critical watchdog cannot ping address 8.8.8.8, rebooting
Oct/28/2024 12:25:48 system,error,critical System rebooted because of ping watchdog timeout

Όπως φαίνεται στο τέλος κάνει reboot από το watchdog που του έχω ορίσει όταν αποτυγχάνει το ping με το 8.8.8.8
Αυτη η συμπεριφορά με το RG502QEAAAR11A06M4G

[BillyVan]

Chateau 5G με 7.16.1

RG502QEAAAR13A03M4G

[pwn1]

Αυτα είναι τα logs από ένα άλλο Chateau 5G (S53UG+M-5HaxD2HaxD) με 7.16.1 και modem firmware RG502QEAAAR13A03M4G_02.003.02.003
Σχεδόν η ίδια συμπεριφορά με το δικό σου ...

[helpme]

Και γω είχα αποσυνδέσεις με την παλιά (RG502QEAAAR11A06M4G) που είναι ειδικά για cosmote και έβαλα τη beta RG502QEAAAR13A03M4G_02.004.02.004 μέσω της εντολής και δεν είχα ξανά πρόβλημα.

interface lte firmware-upgrade update-channel=testing lte1 upgrade

[BillyVan]

Περιεργο εμενα μου βγαζει σφαλμα στο =

Καταλαβαινω οτι του λεμε να παει να το παρει απο το testing channel και οχι απο το stable αλλα σε μενα δεν το δεχεται.

Chateau 5g

υ.γ.1
Τωρα ειδα οτι πρεπει να μπει η 7.17 beta για να το παρει.

υ.γ.2
Εβαλα 7.17.4 beta και αναβαθμισα το μοντεμ.

Ξαναγυρισα στην 7.16.1 και θα το παρακολουθησω

[helpme]

ναι σωστά στην 7.17b4 είμαι και γω.

[pwn1]

Δεν το είχα δει ότι ήταν διαθέσιμο το RG502QEAAAR13A03M4G_02.004.02.004 !
Με το update-channel=testing εμφανίζεται.
Το δοκιμάζω και εγώ. Ευχαριστώ !!!

[BillyVan]

Καλημερα, δεν ξερω αν βοηθησει καποιον αλλα

σε Chateau 5g ο συνδυασμος του beta firmware για το μοντεμ RG502QEAAAR13A03M4G_02.004.02.004

δειχνει να παιζει καλυτερα στην 7.15.3 που τελικα εβαλα.

Εκλεισα 48+ ωρες χωρις το παραμικρο προβλημα.