Mikrotik RouterOS v7 beta

[BillyVan]

What's new in 7.4beta5 (2022-Jun-27 10:39):

Spoiler:

*) container - added support for running Docker (TM) containers on ARM, ARM64 and x86;
*) dhcpv4-server - disallowed overriding message type option;
*) dhcpv4-server - log message when user option updates existing option;
*) dhcpv4-server - placed option 53 as the first one in the packet;
*) health - fixed requesting data from sensor when issuing "get" command;
*) health - fixed voltage reporting on some RBmAP-2nD devices;
*) lte - validate LTE attached IP type in MBIM mode;
*) netwatch - added support for more advanced probing;
*) poe - hide "poe-voltage" parameter on devices that do not support it;
*) route - expose all valid routes to route select filter from OSPF and RIP;
*) route-filter - fixed route select filter rules;
*) upgrade - ignore same version packages during upgrade procedure;
*) wifiwave2 - added initial support for roaming (802.11r) between local AP interfaces;
*) winbox - added "name" parameter under "Routing/BGP/Session" menu;
*) winbox - added "to-address" and "to-ports" parameters under "IPv6/Firewall/NAT" menu;
*) winbox - added support for "Routing/GMP" menu;
*) winbox - added support for "veth" interface types;
*) winbox - fixed "inactive" flag naming under "MPLS/Local Mapping" menu;
*) winbox - fixed minor typo under "Interface" stats;
*) winbox - fixed units for "reachable-time" parameter under "IPv6/ND" menu;
*) winbox - removed "TLS Host" parameter from "IP/Firewall/NAT" menu;
*) winbox - removed duplicate signal strength column under "Wireless/Registration Table" menu;

@Νικηφορε δικιο εχεις

[Nikiforos]

What's new in 7.4rc2 (2022-Jul-07 15:29):

*) chr - fixed booting with added additional SCSI disk;
*) container - added support for running Docker (TM) containers on ARM, ARM64 and x86 (containers created before v7.4 must be recreated);
*) defconf - fixed default configuration loading on devices with WifiWave2 package;
*) lte - show current value for "antenna" parameter when auto antenna selection fails;
*) mpls - improved stability with enabled loop-detect;
*) netwatch - added support for more advanced probing;
*) routerboard - do not try exporting WPS button configuration on devices that does not have it (introduced in v7.4beta5);
*) wifiwave2 - added initial support for roaming (802.11r) between local AP interfaces;

[BillyVan]

What's new in 7.5beta4 (2022-Jul-22 12:46):

Spoiler:

*) bgp - fixed remote refuse capability options, max prefix limit errors and administrative stop;
*) capsman - added randomized range option for "reselect-interval" parameter (CLI only);
*) container - added tun/tap support for containers;
*) container - fixed handling of mounted directories;
*) container - fixed imported tar image path logging message;
*) defconf - fixed loading of default configuration on RB4011 with WifiWave2 package enabled;
*) dhcpv6-client - moved invalid lifetime logging message from "debug" to "error" topic;
*) dhcpv6-relay - fixed relay forwarding (introduced in v7.1.5);
*) dhcpv6-server - improved stability when acquiring binding;
*) dns - added "match-subdomain" option for static entries (CLI only);
*) firewall - added support for RTSP helper;
*) lora - do not ignore negative sign for spoofed GPS coordinates;
*) lte - added "SIM not inserted" and "SIM failure" messages to "status" and "monitor" commands for AT modems;
*) lte - added at-chat and NMEA port support for Simcom modems, USB composition (device id - 0x9003);
*) lte - added at-chat support for Simcom modems, USB composition (device id - 0x9005);
*) lte - changed cell ID info display to short format for 3G connections;
*) lte - fixed LTE interface presence for Telit LN940;
*) lte - improved antenna scan for Chateau devices with switchable antennas;
*) lte - improved configuration export when multiple LTE interfaces are present;
*) lte - modem dialer, do not reset dialing sequence if modem reply with error to user set init-string;
*) netinstall - fixed Netinstall procedure for ARM devices;
*) netwatch - automatically start migrated probes from previous RouterOS versions;
*) netwatch - changed ICMP default packet loss fail threshold to 85%;
*) ospf - improved stability when interface is being disabled during database exchange;
*) ovpn - fixed encryption key renewal process which caused periodic session disconnects;
*) ovpn - improved system stability when hardware acceleration is used on ARM64 devices;
*) ovpn - moved disconnected user logging message from "debug" to "info" topic;
*) port - added support for D-Link DWM-222 in serial/PPP mode (device id - 0xac01/0x7e3d);
*) port - added support for Huawei/ZTE K5006z in serial/PPP mode (device id - 0x1017/0x1018);
*) ptp - improved system stability on CRS devices;
*) quickset - removed PPTP and SSTP server addition for "VPN" checkbox;
*) route-filter - fixed "delete bgp-communities" command;
*) sfp - fixed QSFP+ and QSFP28 interface disable when using breakout cable;
*) snmp - fixed usage of VRF after system startup;
*) socks - fixed "dst-port" usage when checking access list;
*) ssh - fixed importing of public keys;
*) ssh - fixed minor typo issue when importing public key;
*) sstp - fixed client stuck in "nonce matching" state;
*) switch - fixed ACL rules for 98DXxxxx switches with more than 28 ports (introduced in v7.3);
*) traceroute - added "do-not-fragment" parameter support (CLI only);
*) traceroute - increased packet size limit to 65535;
*) webfig - fixed displaying of grahs in status pages;
*) webfig - fixed floating point field's negative value in -0.*** format;
*) wifiwave2 - added "sae-pwe" parameter with hash-to-element mechanism for SAE PWE derivation;
*) wifiwave2 - added support for 802.11k;
*) wifiwave2 - fixed displaying of AKM in scan results;
*) wifiwave2 - fixed duplicated AKM in RSN message;
*) wifiwave2 - fixed incorrect AKM usage for FT-WPA3-EAP-192;
*) wifiwave2 - fixed reassociation response sending for fast transition over DS;
*) wifiwave2 - fixed setting of "ft-nas-identifier" parameter;
*) winbox - do not show previously attached LTE interfaces while establishing LTE connection;
*) winbox - fixed "Enable", "Disable" and "Comment" functions for L2TP-ether type interfaces;
*) winbox - fixed "Next Run" parameter displaying under "System/Scheduler" menu;
*) winbox - fixed "Type" and "Value" field displaying under "System/Health" sub-menu's;
*) winbox - show warning messages for BGP connection entries;
*) x86 - fixed advertising of 2500M and 5000M link speeds on ixgbe driver;

[deniSun]

Την βλέπω να περνάει σύντομα σε stable.

[BillyVan]

What's new in 7.5beta5 (2022-Jul-28 10:59):

Spoiler:

*) health - renamed "CPU" to "switch" for temperature reading information on CRS518-16XS-2XQ;
*) l3hw - fixed HW offloaded NAT;
*) ppp - improved service stability under high load;
*) ppp - use /32 as default netmask if not specified for "routes" parameter;
*) sfp - fixed "eeprom" reading on single SFP port ARM devices;
*) sfp - fixed unresponsive "sfp1" interface after disabling "ether1" on NetMetal devices;
*) swos - enabled SwitchOS support for CRS310-1G-5S-4S+

[BillyVan]

What's new in 7.5beta8 (2022-Aug-09 12:36):

Spoiler:

*) bridge - fixed "new-priority" value validation for NAT rules;
*) certificate - fixed handling of empty AKID by SCEP client;
*) container - fixed free disk space checking;
*) dhcpv4-server - fixed removal of dynamic leases when server is removed;
*) health - fixed "temperature" and "power-consumption" readings on RB1100x4;
*) health - improved voltage reading on CRS112-8P-4S;
*) hostpot - fixed Walled Garden functionality for HTTPS sites;
*) hotspot - automatically reject all HTTPS requests passing through HotSpot server for unauthorized users;
*) hotspot - limit maximum allowed connections based on free RAM resources;
*) hotspot - removed "https-redirect" option;
*) ike2 - allow sending certificate chain as initiator;
*) leds - fixed wireless LED functionality on LHGG;
*) lte - disallow empty APN name only for default entry;
*) lte - fixed UDP performance on MMIPS devices;
*) ping - improved service stability;
*) rb5009 - fixed ether1 status reporting after system reboot;
*) routerboard - added "reset-button" script feature for TILE devices;
*) sfp - improved combo SFP ports initialization handling on CRS312-4C+8XG, CRS328-4C-20S-4S+;
*) ssh - added AES support for PEM decryption;
*) switch - removed limit for number of hardware-offloaded bonding interfaces;
*) swos - fixed SwOS upgrade procedure on CRS305-1G-4S+;
*) vrrp - added "sync-connection-tracking" compatibility with preemption-mode;
*) vrrp - fixed HW offloaded bridge MAC address learning when changing from VRRP master to backup;
*) vrrp - fixed high CPU usage when "sync-connection-tracking=yes" and the backup router goes offline;
*) vrrp - fixed initial connection tracking synchronization, a backup router now always receives all existing connections;
*) vrrp - improved connection tracking synchronization protocol (CTSYNC), the new protocol is incompatible with previous RouterOS versions with "sync-connection-tracking=yes";
*) wifiwave2 - disable wireless interface after wireless configuration reset;
*) wifiwave2 - fixed group key update for client devices which connect via fast BSS transition;
*) wifiwave2 - fixed usage of Canada country setting on US locked devices;
*) wifiwave2 - improved default channel width selection for interfaces in station mode;
*) wireless - fixed interface initialization on x86 devices;
*) x86 - allow downgrading to RouterOS v6 only if it was previously installed;

[deniSun]

container;
Τελικά λειτουργεί αυτό;

[zackkast]

Δεν έχω ιδέα

[deniSun]

Σκεφτόμουν να το δοκιμάσω πάνω σε ένα crs που έχω στην άκρη παρατημένο.
Θα με γλύτωνε από την χρήση του παλιού laptop που χρησιμοποιώ τώρα.
Τώρα τρέχω επάνω του: adblock, smokeping, rss2email
Μπορούν να στηθούν άραγε;
Το pihole είναι κάποια linux έκδοση;
Και το βασικότερο... από απόδοση δεν ξέρω πώς θα τα πάει.

[adiS]

Σκεφτόμουν να το δοκιμάσω πάνω σε ένα crs που έχω στην άκρη παρατημένο.
Θα με γλύτωνε από την χρήση του παλιού laptop που χρησιμοποιώ τώρα.
Τώρα τρέχω επάνω του: adblock, smokeping, rss2email
Μπορούν να στηθούν άραγε;
Το pihole είναι κάποια linux έκδοση;
Και το βασικότερο... από απόδοση δεν ξέρω πώς θα τα πάει.

Εγώ όπως ανέφερα μετά την άδεια οταν βγει σε stable το container θα δοκιμασω pihole να δω αν μπορεί να το τρέξει το hap2

[deniSun]

Εγώ όπως ανέφερα μετά την άδεια οταν βγει σε stable το container θα δοκιμασω pihole να δω αν μπορεί να το τρέξει το hap2

Κρατάω μικρό καλάθι.
Την άλλη εβδομάδα λέω να κάνω δοκιμές να δω τι γίνεται.

[adiS]

Κρατάω μικρό καλάθι.
Την άλλη εβδομάδα λέω να κάνω δοκιμές να δω τι γίνεται.

Εγώ νομίζω μια χαρά θα είναι. Οχι στο hap2 αλλά σε κάποιο μεγαλύτερο. Μένει να δοκιμαστεί. Εγώ μονο την τηλεόραση και το κινητό να μπορεί να σηκώσει ευχαριστημένος θα είμαι.

[deniSun]

Μπορεί να τρέχει και να κόβει ad αλλά εάν το response είναι μεγάλο, τι να το κάνεις;

[adiS]

Μπορεί να τρέχει και να κόβει ad αλλά εάν το response είναι μεγάλο, τι να το κάνεις;

ναι ισχύει για αυτό θέλω να το δοκιμάσω.

Μετά νομίζω πρέπει να πάω σε ax3 όταν με το καλό βγει. Εκεί νομίζω θα είναι πολύ καλά για παιχνίδι με containers.

Για το ax2 δεν είμαι τόσο σίγουρος. Αυτό σίγουρα θα εξαρτηθεί και με το πόσο θα έχουν.

Για κάτι ποιο μεγάλο απλά για εμένα θα ήταν overkill

[deniSun]

Τώρα που βλέπω το crs που έχω έχει μόνο 128Μ και δεν πρόκειται να το σηκώσει με τίποτε (όχι σωστά).
Το 4011 δεν το χαραμίζω για τέτοια πράγματα.
Οπότε τα αφήνω ως έχουν.
Το παλιό laptop είναι ένας i3 με 8g και ssd, οπότε σίγουρα δεν θα πάρω κάτι καλύτερο από αυτό.