σετάρισμα Bios ASRock G31M-S

[tzitzikas2]

καλησπέρα. Σετάρω ένα παλιό μηχάνημα με την ASRock G31M-S

https://www.asrock.com/mb/Intel/G31M-S/#Manual

Θα ήθελα την γνώμη σας για τις παρακάτω ρυθμίσεις στο Bios τι να επιλέξω

Chipset Configuration

1) Memory Remap Feature (επιλογές: [Enabled] and [Disabled]. The default value is [Disabled]) για 64bit λειτουργικό διάβασα οτι πρέπει να είναι Enabled

2) Flexibility Option (επιλογές: The default value of this option is [Disabled]. It will allow better tolerance for
memory compatibility when it is set to [Enabled].)

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

ACPI Configuration

1) Suspend to RAM
This field allows you to select whether to auto-detect or disable the
Suspend-to-RAM feature. Select [Auto] will enable this feature if the
system supports it

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

IDE Configuration

1) S.M.A.R.T.
Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis,
and Reporting Technology) feature. Configuration options: [Disabled], [Auto],
[Enabled]. <--- για αυτό διάβασα να το έχω στο Enabled
2) 32-Bit Data Transfer
Use this item to enable 32-bit access to maximize the IDE hard disk data
transfer rate. <--- για αυτό διάβασα να το έχω στο Enabled αν και για SATΑ δίσκους δεν παίζει ρόλο διάβασα.

*** ο δίσκος θα είναι ssd SATA

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

USB Configuration

1) Legacy USB Support
Use this option to select legacy support for USB devices. There are four configuration options: [Enabled], [Auto], [Disabled] and [BIOS Setup
Only].

The default value is [BIOS Setup Only]. Please refer to below descriptions for the details of these four options:
[Enabled] - Enables support for legacy USB.
[Auto] - Enables legacy support if USB devices are connected.
[Disabled] - USB devices are not allowed to use under legacy OS and BIOS setup when [Disabled] is selected. If you have USB compatibility
issue, it is recommended to select [Disabled] to enter OS.
[BIOS Setup Only] - USB devices are allowed to use only under BIOS setup and Windows / Linux OS.

φυσικά δεν πρέπει να επιλέξω Disabled, αλλά να προτιμήσω Enabled, Auto ή BIOS Setup Only?

ευχαριστώ!

[sweet dreams]

Tα περισσότερα τα έχεις βρει μόνος σου.
2 >>> Enabled
ACPI >>> Αuto
Legacy USB Support >>> Enabled.