Εμφάνιση 1-7 από 7
  1. #1
    Εγγραφή
    05-02-2013
    Μηνύματα
    5
    Downloads
    1
    Uploads
    0
    Τύπος
    ADSL2+
    Ταχύτητα
    102400/10240
    ISP
    COSMOTE
    Router
    Speedport Plus
    Exclamation
    Καλησπέρα,

    Από εχθές η κάρτα μετά από μια επανεκκίνηση του κέντρου, έδειχνε τα spans σαν Unconfigured. Έγινε ξανά η ρύθμιση τους αλλά ενώ δηλώνουν ΟΚ δεν φτάνουν οι κλήσεις στο κέντρο ούτε μπορούμε να κάνουμε εξερχόμενες. Παρατηρήσαμε ότι το Dahdi service εμφάνιζε σφάλματα και κάναμε ξανά την εγκατάσταση του. Το span έδειχνε ξανά ΟΚ και λαμβάναμε εισερχόμενες αλλά δεν μπορούσαμε να κάνουμε εξερχόμενες. Μετά από amportal stop & start εμφανίζονται πάλι σφάλματα στο dahdi και δεν ξεκινά με τίποτα. Δοκιμάσαμε την εγκατάσταση νεώτερου dahdi αλλά δεν αναγνώριζε την κάρτα, οπότε ξαναεγκαταστήσαμε την έκδοση 2.10.2 που κατεβάσαμε από το site της allo.com.

    Το span το ρυθμίσαμε ως bri-cpe-ptmp και ο πάροχος (Forthnet) έχει τις ίδιες ρυθμίσεις. Η κάρτα είναι ρυθμισμένη ως ΤΕ. Μετά από επικοινωνία με τον πάροχο είδαμε ότι όταν το span δείχνει OK και δεν λαμβάνει κλήσεις, δεν σηκώνει το Layer 2.

    Το τηλεφωνικό έχει τις κάτωθι εκδόσεις
    OS: Centos7 x64
    Kernel: 3.10
    FreePBX: 13.0.33
    Dahdi: 2.10.2

    Kάρτα
    ALLO BRI CARD PCIE - 4 PORTS + LEC

    Έχει κανείς καμία πρόταση που θα βοηθήσει να περιορίσω το πρόβλημα μπας και το λύσω;

  2. #2
    Εγγραφή
    11-09-2017
    Μηνύματα
    1.638
    Downloads
    1
    Uploads
    0
    ISP
    None
    Κάνε restart το dahdi και ανέβασε εδώ τι σου βγάζει στο dmesg. Επίσης αυτά τα σφάλματα που λες, που τα βγάζει και τι λένε.

  3. #3
    Εγγραφή
    05-02-2013
    Μηνύματα
    5
    Downloads
    1
    Uploads
    0
    Τύπος
    ADSL2+
    Ταχύτητα
    102400/10240
    ISP
    COSMOTE
    Router
    Speedport Plus
    [root@PBX ~]# dmesg
    [ 0.000000] microcode: microcode updated early to revision 0xd6, date = 2019-10-03
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.10.0-1127.19.1.el7.x86_64 (mockbuild@kbuilder.bsys.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-39) (GCC) ) #1 SMP Tue Aug 25 17:23:54 UTC 2020
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.10.0-1127.19.1.el7.x86_64 root=UUID=585b03ab-9a43-40e6-81cb-d0f2f8453af1 ro crashkernel=auto rd.md.uuid=9b6f7aa4:12d351c9:a8bedab9:90b9ff85 rd.md.uuid=f060587b:407004d9:6190db54:091af1ad rd.md.uuid=c5b46755:5ce3a2fb:8d832f6c:2ae592a6 rhgb quiet LANG=en_US.UTF-8
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c4c64fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c4c65000-0x00000000c4c65fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000c4c66000-0x00000000c4c66fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c4c67000-0x00000000cbd7efff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cbd7f000-0x00000000cc0c9fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000cc0ca000-0x00000000cc279fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cc27a000-0x00000000cc91efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cc91f000-0x00000000ccefefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000cceff000-0x00000000ccefffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ccf00000-0x00000000cfffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042effffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 3.0 present.
    [ 0.000000] DMI: Gigabyte Technology Co., Ltd. B250M-DS3H/B250M-DS3H-CF, BIOS F2 11/24/2016
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] e820: last_pfn = 0x42f000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: write-back
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
    [ 0.000000] 1 base 00D0000000 mask 7FF0000000 uncachable
    [ 0.000000] 2 base 00CE000000 mask 7FFE000000 uncachable
    [ 0.000000] 3 base 00CD800000 mask 7FFF800000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WP UC- UC
    [ 0.000000] e820: last_pfn = 0xccf00 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fccc0-0x000fcccf] mapped at [ffffffffff200cc0]
    [ 0.000000] Base memory trampoline at [ffffa0a980096000] 96000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] BRK [0x0dc73000, 0x0dc73fff] PGTABLE
    [ 0.000000] BRK [0x0dc74000, 0x0dc74fff] PGTABLE
    [ 0.000000] BRK [0x0dc75000, 0x0dc75fff] PGTABLE
    [ 0.000000] BRK [0x0dc76000, 0x0dc76fff] PGTABLE
    [ 0.000000] BRK [0x0dc77000, 0x0dc77fff] PGTABLE
    [ 0.000000] BRK [0x0dc78000, 0x0dc78fff] PGTABLE
    [ 0.000000] BRK [0x0dc79000, 0x0dc79fff] PGTABLE
    [ 0.000000] BRK [0x0dc7a000, 0x0dc7afff] PGTABLE
    [ 0.000000] BRK [0x0dc7b000, 0x0dc7bfff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x35886000-0x36c3afff]
    [ 0.000000] Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 00000000000f05b0 00024 (v02 ALASKA)
    [ 0.000000] ACPI: XSDT 00000000cc57a0a0 000BC (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 00000000cc5a0288 00114 (v06 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 00000000cc57a1f0 26095 (v02 ALASKA A M I 01072009 INTL 20160422)
    [ 0.000000] ACPI: FACS 00000000cc91ec40 00040
    [ 0.000000] ACPI: APIC 00000000cc5a03a0 00084 (v03 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 00000000cc5a0428 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: MCFG 00000000cc5a0470 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
    [ 0.000000] ACPI: FIDT 00000000cc5a04b0 0009C (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: SSDT 00000000cc5a0550 03154 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
    [ 0.000000] ACPI: SSDT 00000000cc5a36a8 02544 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
    [ 0.000000] ACPI: HPET 00000000cc5a5bf0 00038 (v01 INTEL SKL 00000001 MSFT 0000005F)
    [ 0.000000] ACPI: SSDT 00000000cc5a5c28 00E3B (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
    [ 0.000000] ACPI: SSDT 00000000cc5a6a68 008FF (v02 INTEL xh_rvp10 00000000 INTL 20160422)
    [ 0.000000] ACPI: UEFI 00000000cc5a7368 00042 (v01 INTEL EDK2 00000002 01000013)
    [ 0.000000] ACPI: SSDT 00000000cc5a73b0 00EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
    [ 0.000000] ACPI: LPIT 00000000cc5a8290 00094 (v01 INTEL SKL 00000000 MSFT 0000005F)
    [ 0.000000] ACPI: WSMT 00000000cc5a8328 00028 (v01 INTEL SKL 00000000 MSFT 0000005F)
    [ 0.000000] ACPI: SSDT 00000000cc5a8350 0029F (v02 INTEL sensrhub 00000000 INTL 20160422)
    [ 0.000000] ACPI: SSDT 00000000cc5a85f0 03002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
    [ 0.000000] ACPI: DBGP 00000000cc5ab5f8 00034 (v01 INTEL 00000002 MSFT 0000005F)
    [ 0.000000] ACPI: DBG2 00000000cc5ab630 00054 (v00 INTEL 00000002 MSFT 0000005F)
    [ 0.000000] ACPI: DMAR 00000000cc5ab688 000A8 (v01 INTEL SKL 00000001 INTL 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042effffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x42efd7000-0x42effdfff]
    [ 0.000000] Reserving 161MB of memory at 688MB for crashkernel (System RAM: 16302MB)
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x42effffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009bfff]
    [ 0.000000] node 0: [mem 0x00100000-0xc4c64fff]
    [ 0.000000] node 0: [mem 0xc4c67000-0xcbd7efff]
    [ 0.000000] node 0: [mem 0xcc0ca000-0xcc279fff]
    [ 0.000000] node 0: [mem 0xcceff000-0xccefffff]
    [ 0.000000] node 0: [mem 0x100000000-0x42effffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x42effffff]
    [ 0.000000] On node 0 totalpages: 4173513
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3995 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12989 pages used for memmap
    [ 0.000000] DMA32 zone: 831278 pages, LIFO batch:31
    [ 0.000000] Normal zone: 52160 pages used for memmap
    [ 0.000000] Normal zone: 3338240 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics memory at [mem 0xce000000-0xcfffffff]
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc4c65000-0xc4c65fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc4c66000-0xc4c66fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcbd7f000-0xcc0c9fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcc27a000-0xcc91efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcc91f000-0xccefefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xccf00000-0xcfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfdffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:5120 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] percpu: Embedded 38 pages/cpu s118784 r8192 d28672 u524288
    [ 0.000000] pcpu-alloc: s118784 r8192 d28672 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4108279
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-1127.19.1.el7.x86_64 root=UUID=585b03ab-9a43-40e6-81cb-d0f2f8453af1 ro crashkernel=auto rd.md.uuid=9b6f7aa4:12d351c9:a8bedab9:90b9ff85 rd.md.uuid=f060587b:407004d9:6190db54:091af1ad rd.md.uuid=c5b46755:5ce3a2fb:8d832f6c:2ae592a6 rhgb quiet LANG=en_US.UTF-8
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
    [ 0.000000] x86/fpu: xstate_offset[3]: 03c0, xstate_sizes[3]: 0040
    [ 0.000000] x86/fpu: xstate_offset[4]: 0400, xstate_sizes[4]: 0040
    [ 0.000000] xsave: enabled xstate_bv 0x1f, cntxt size 0x440 using standard form
    [ 0.000000] Memory: 5168608k/17547264k available (7784k kernel code, 853212k absent, 533300k reserved, 5958k data, 1980k init)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] x86/pti: Unmapping kernel while in userspace
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=4.
    [ 0.000000] NR_IRQS:327936 nr_irqs:1024 0
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 67108864 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Detected 3700.000 MHz processor
    [ 0.000021] tsc: Detected 3696.000 MHz TSC
    [ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency..
    [ 0.000022] 7392.00 BogoMIPS (lpj=3696000)
    [ 0.000023] pid_max: default: 32768 minimum: 301
    [ 0.000039] Security Framework initialized
    [ 0.000043] SELinux: Initializing.
    [ 0.000049] SELinux: Starting in permissive mode
    [ 0.000050] Yama: becoming mindful.
    [ 0.000742] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.002944] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.003720] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.003731] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.003866] Initializing cgroup subsys memory
    [ 0.003868] Initializing cgroup subsys devices
    [ 0.003869] Initializing cgroup subsys freezer
    [ 0.003870] Initializing cgroup subsys net_cls
    [ 0.003871] Initializing cgroup subsys blkio
    [ 0.003871] Initializing cgroup subsys perf_event
    [ 0.003873] Initializing cgroup subsys hugetlb
    [ 0.003873] Initializing cgroup subsys pids
    [ 0.003874] Initializing cgroup subsys net_prio
    [ 0.004778] CPU0: Thermal monitoring enabled (TM1)
    [ 0.004791] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
    [ 0.004791] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
    [ 0.004792] tlb_flushall_shift: 6
    [ 0.004807] FEATURE SPEC_CTRL Present
    [ 0.004808] FEATURE IBPB_SUPPORT Present
    [ 0.004808] Spectre V1 : Mitigation: Load fences, usercopy/swapgs barriers and __user pointer sanitization
    [ 0.004810] Spectre V2 : Enabling Indirect Branch Prediction Barrier
    [ 0.004823] Using IBRS as the default Spectre v2 mitigation for a Skylake-
    [ 0.004824] generation CPU. This may have a negative performance impact.
    [ 0.004825] Spectre V2 : Mitigation: IBRS (kernel)
    [ 0.004832] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
    [ 0.004844] SRBDS: Vulnerable: No microcode
    [ 0.004844] MDS: Mitigation: Clear CPU buffers
    [ 0.005138] Freeing SMP alternatives: 28k freed
    [ 0.006280] ACPI: Core revision 20130517
    [ 0.023302] ACPI: All ACPI Tables successfully acquired
    [ 0.023542] ftrace: allocating 29619 entries in 116 pages
    [ 0.031690] DMAR: Host address width 39
    [ 0.031691] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.031697] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
    [ 0.031698] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.031701] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
    [ 0.031702] DMAR: RMRR base: 0x000000cc059000 end: 0x000000cc078fff
    [ 0.031702] DMAR: RMRR base: 0x000000cd800000 end: 0x000000cfffffff
    [ 0.031704] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
    [ 0.031705] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
    [ 0.031705] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
    [ 0.033043] DMAR-IR: Enabled IRQ remapping in x2apic mode
    [ 0.033044] Enabling x2apic
    [ 0.033045] Enabled x2apic
    [ 0.033055] Switched APIC routing to cluster x2apic.
    [ 0.037214] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.047216] smpboot: CPU0: Intel(R) Core(TM) i3-6100 CPU @ 3.70GHz (fam: 06, model: 5e, stepping: 03)
    [ 0.047223] TSC deadline timer enabled
    [ 0.047253] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
    [ 0.047258] ... version: 4
    [ 0.047259] ... bit width: 48
    [ 0.047259] ... generic registers: 4
    [ 0.047260] ... value mask: 0000ffffffffffff
    [ 0.047260] ... max period: 00007fffffffffff
    [ 0.047261] ... fixed-purpose events: 3
    [ 0.047261] ... event mask: 000000070000000f
    [ 0.050398] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.048087] smpboot: Booting Node 0, Processors #1 #2
    [ 0.051832] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/late...-vuln/mds.html for more details.
    [ 0.051872] #3 OK
    [ 0.053151] Brought up 4 CPUs
    [ 0.053153] smpboot: Max logical packages: 1
    [ 0.053154] smpboot: Total of 4 processors activated (29568.00 BogoMIPS)
    [ 0.112531] node 0 initialised, 2748036 pages in 56ms
    [ 0.112667] devtmpfs: initialized
    [ 0.112716] x86/mm: Memory block size: 128MB
    [ 0.114950] EVM: security.selinux
    [ 0.114951] EVM: security.ima
    [ 0.114952] EVM: security.capability
    [ 0.115012] PM: Registering ACPI NVS region [mem 0xc4c65000-0xc4c65fff] (4096 bytes)
    [ 0.115014] PM: Registering ACPI NVS region [mem 0xcc27a000-0xcc91efff] (6967296 bytes)
    [ 0.115938] atomic64 test passed for x86-64 platform with CX8 and with SSE
    [ 0.115940] pinctrl core: initialized pinctrl subsystem
    [ 0.116035] RTC time: 20:27:05, date: 09/24/20
    [ 0.116085] NET: Registered protocol family 16
    [ 0.116258] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.116259] ACPI: bus type PCI registered
    [ 0.116261] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.116308] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.116310] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.116316] PCI: Using configuration type 1 for base access
    [ 0.119917] ACPI: Added _OSI(Module Device)
    [ 0.119919] ACPI: Added _OSI(Processor Device)
    [ 0.119920] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.119921] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.119922] ACPI: Added _OSI(Linux-Dell-Video)
    [ 0.122447] ACPI: EC: Look up EC in DSDT
    [ 0.126275] ACPI: Executed 35 blocks of module-level executable AML code
    [ 0.132086] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
    [ 0.134405] ACPI: Dynamic OEM Table Load:
    [ 0.134411] ACPI: SSDT ffffa0adaecfb000 00759 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
    [ 0.135013] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.135057] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
    [ 0.136021] ACPI: Dynamic OEM Table Load:
    [ 0.136025] ACPI: SSDT ffffa0adaecf3000 003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
    [ 0.136627] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.136913] ACPI: Dynamic OEM Table Load:
    [ 0.136917] ACPI: SSDT ffffa0adaecfc000 0065C (v02 PmRef ApIst 00003000 INTL 20160422)
    [ 0.137583] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.137703] ACPI: Dynamic OEM Table Load:
    [ 0.137706] ACPI: SSDT ffffa0adaec71800 0018A (v02 PmRef ApCst 00003000 INTL 20160422)
    [ 0.138305] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.139426] ACPI: Interpreter enabled
    [ 0.139450] ACPI: (supports S0 S3 S4 S5)
    [ 0.139451] ACPI: Using IOAPIC for interrupt routing
    [ 0.139474] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.139512] ACPI: Enabled 6 GPEs in block 00 to 7F
    [ 0.140840] ACPI: Power Resource [PG00] (on)
    [ 0.141106] ACPI: Power Resource [PG01] (on)
    [ 0.141362] ACPI: Power Resource [PG02] (on)
    [ 0.143306] ACPI: Power Resource [WRST] (on)
    [ 0.143509] ACPI: Power Resource [WRST] (on)
    [ 0.143713] ACPI: Power Resource [WRST] (on)
    [ 0.143915] ACPI: Power Resource [WRST] (on)
    [ 0.144116] ACPI: Power Resource [WRST] (on)
    [ 0.144317] ACPI: Power Resource [WRST] (on)
    [ 0.144517] ACPI: Power Resource [WRST] (on)
    [ 0.144721] ACPI: Power Resource [WRST] (on)
    [ 0.144921] ACPI: Power Resource [WRST] (on)
    [ 0.145123] ACPI: Power Resource [WRST] (on)
    [ 0.145341] ACPI: Power Resource [WRST] (on)
    [ 0.145541] ACPI: Power Resource [WRST] (on)
    [ 0.145746] ACPI: Power Resource [WRST] (on)
    [ 0.145946] ACPI: Power Resource [WRST] (on)
    [ 0.146150] ACPI: Power Resource [WRST] (on)
    [ 0.146354] ACPI: Power Resource [WRST] (on)
    [ 0.146557] ACPI: Power Resource [WRST] (on)
    [ 0.147400] ACPI: Power Resource [WRST] (on)
    [ 0.147601] ACPI: Power Resource [WRST] (on)
    [ 0.147806] ACPI: Power Resource [WRST] (on)
    [ 0.152897] ACPI: Power Resource [FN00] (off)
    [ 0.152966] ACPI: Power Resource [FN01] (off)
    [ 0.153032] ACPI: Power Resource [FN02] (off)
    [ 0.153097] ACPI: Power Resource [FN03] (off)
    [ 0.153163] ACPI: Power Resource [FN04] (off)
    [ 0.154071] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.154076] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.154102] \_SB_.PCI0:_OSC invalid UUID
    [ 0.154103] _OSC request data:1 1f 0
    [ 0.154105] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 0.154622] PCI host bridge to bus 0000:00
    [ 0.154624] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
    [ 0.154626] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
    [ 0.154627] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
    [ 0.154629] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff window]
    [ 0.154630] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
    [ 0.154632] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.154638] pci 0000:00:00.0: [8086:190f] type 00 class 0x060000
    [ 0.154859] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
    [ 0.154866] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
    [ 0.154871] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.154874] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    [ 0.154986] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
    [ 0.154994] pci 0000:00:08.0: reg 0x10: [mem 0xf732e000-0xf732efff 64bit]
    [ 0.155118] pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
    [ 0.155132] pci 0000:00:14.0: reg 0x10: [mem 0xf7310000-0xf731ffff 64bit]
    [ 0.155186] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.155311] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.155360] pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
    [ 0.155378] pci 0000:00:16.0: reg 0x10: [mem 0xf732d000-0xf732dfff 64bit]
    [ 0.155437] pci 0000:00:16.0: PME# supported from D3hot
    [ 0.155558] pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
    [ 0.155570] pci 0000:00:17.0: reg 0x10: [mem 0xf7328000-0xf7329fff]
    [ 0.155576] pci 0000:00:17.0: reg 0x14: [mem 0xf732c000-0xf732c0ff]
    [ 0.155582] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
    [ 0.155589] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
    [ 0.155595] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
    [ 0.155601] pci 0000:00:17.0: reg 0x24: [mem 0xf732b000-0xf732b7ff]
    [ 0.155633] pci 0000:00:17.0: PME# supported from D3hot
    [ 0.155739] pci 0000:00:1b.0: [8086:a2eb] type 01 class 0x060400
    [ 0.155798] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.155905] pci 0000:00:1c.0: [8086:a294] type 01 class 0x060400
    [ 0.155955] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.156049] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.156089] pci 0000:00:1c.5: [8086:a295] type 01 class 0x060400
    [ 0.156140] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.156233] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 0.156261] pci 0000:00:1c.6: [8086:a296] type 01 class 0x060400
    [ 0.156311] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
    [ 0.156404] pci 0000:00:1c.6: System wakeup disabled by ACPI
    [ 0.156430] pci 0000:00:1c.7: [8086:a297] type 01 class 0x060400
    [ 0.156482] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
    [ 0.156575] pci 0000:00:1c.7: System wakeup disabled by ACPI
    [ 0.156602] pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400
    [ 0.156661] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.156758] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.156785] pci 0000:00:1d.1: [8086:a299] type 01 class 0x060400
    [ 0.156844] pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold
    [ 0.156939] pci 0000:00:1d.1: System wakeup disabled by ACPI
    [ 0.156967] pci 0000:00:1d.2: [8086:a29a] type 01 class 0x060400
    [ 0.157025] pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
    [ 0.157120] pci 0000:00:1d.2: System wakeup disabled by ACPI
    [ 0.157147] pci 0000:00:1d.3: [8086:a29b] type 01 class 0x060400
    [ 0.157206] pci 0000:00:1d.3: PME# supported from D0 D3hot D3cold
    [ 0.157300] pci 0000:00:1d.3: System wakeup disabled by ACPI
    [ 0.157342] pci 0000:00:1f.0: [8086:a2c8] type 00 class 0x060100
    [ 0.157521] pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
    [ 0.157531] pci 0000:00:1f.2: reg 0x10: [mem 0xf7324000-0xf7327fff]
    [ 0.157666] pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
    [ 0.157686] pci 0000:00:1f.3: reg 0x10: [mem 0xf7320000-0xf7323fff 64bit]
    [ 0.157717] pci 0000:00:1f.3: reg 0x20: [mem 0xf7300000-0xf730ffff 64bit]
    [ 0.157759] pci 0000:00:1f.3: PME# supported from D3hot D3cold
    [ 0.157873] pci 0000:00:1f.3: System wakeup disabled by ACPI
    [ 0.157905] pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
    [ 0.157951] pci 0000:00:1f.4: reg 0x10: [mem 0xf732a000-0xf732a0ff 64bit]
    [ 0.158020] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
    [ 0.158209] pci 0000:00:1b.0: PCI bridge to [bus 01]
    [ 0.158277] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.158298] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
    [ 0.158321] pci 0000:02:00.0: reg 0x18: [mem 0xf7200000-0xf7200fff 64bit]
    [ 0.158336] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
    [ 0.158415] pci 0000:02:00.0: supports D1 D2
    [ 0.158417] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.158498] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 0.158527] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.158529] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
    [ 0.158531] pci 0000:00:1c.0: bridge window [mem 0xf7200000-0xf72fffff]
    [ 0.158535] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
    [ 0.158581] pci 0000:00:1c.5: PCI bridge to [bus 03]
    [ 0.158645] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060400
    [ 0.158770] pci 0000:04:00.0: supports D1 D2
    [ 0.158771] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.158835] pci 0000:04:00.0: System wakeup disabled by ACPI
    [ 0.158864] pci 0000:00:1c.6: PCI bridge to [bus 04-05]
    [ 0.158867] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
    [ 0.158869] pci 0000:00:1c.6: bridge window [mem 0xf7100000-0xf71fffff]
    [ 0.158925] pci 0000:05:00.0: [e159:0001] type 00 class 0x028000
    [ 0.158943] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
    [ 0.158956] pci 0000:05:00.0: reg 0x14: [mem 0xf7100000-0xf7100fff]
    [ 0.159108] pci 0000:04:00.0: PCI bridge to [bus 05]
    [ 0.159115] pci 0000:04:00.0: bridge window [io 0xd000-0xdfff]
    [ 0.159119] pci 0000:04:00.0: bridge window [mem 0xf7100000-0xf71fffff]
    [ 0.159195] pci 0000:06:00.0: [10b5:8112] type 01 class 0x060400
    [ 0.159318] pci 0000:06:00.0: supports D1
    [ 0.159319] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
    [ 0.159383] pci 0000:06:00.0: System wakeup disabled by ACPI
    [ 0.159412] pci 0000:00:1c.7: PCI bridge to [bus 06-07]
    [ 0.159415] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
    [ 0.159417] pci 0000:00:1c.7: bridge window [mem 0xf7000000-0xf70fffff]
    [ 0.159477] pci 0000:07:00.0: [1397:08b4] type 00 class 0x020400
    [ 0.159499] pci 0000:07:00.0: reg 0x10: [io 0xc000-0xc007]
    [ 0.159513] pci 0000:07:00.0: reg 0x14: [mem 0xf7000000-0xf7000fff]
    [ 0.159617] pci 0000:07:00.0: supports D1 D2
    [ 0.159619] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot
    [ 0.159712] pci 0000:06:00.0: PCI bridge to [bus 07]
    [ 0.159717] pci 0000:06:00.0: bridge window [io 0xc000-0xcfff]
    [ 0.159722] pci 0000:06:00.0: bridge window [mem 0xf7000000-0xf70fffff]
    [ 0.159782] pci 0000:00:1d.0: PCI bridge to [bus 08]
    [ 0.159833] pci 0000:00:1d.1: PCI bridge to [bus 09]
    [ 0.159884] pci 0000:00:1d.2: PCI bridge to [bus 0a]
    [ 0.159937] pci 0000:00:1d.3: PCI bridge to [bus 0b]
    [ 0.161438] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.161480] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.161520] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.161559] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.161598] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.161637] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.161677] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.161720] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.162114] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.162118] vgaarb: loaded
    [ 0.162119] vgaarb: bridge control possible 0000:00:02.0
    [ 0.162174] SCSI subsystem initialized
    [ 0.162193] ACPI: bus type USB registered
    [ 0.162205] usbcore: registered new interface driver usbfs
    [ 0.162211] usbcore: registered new interface driver hub
    [ 0.162224] usbcore: registered new device driver usb
    [ 0.162276] EDAC MC: Ver: 3.0.0
    [ 0.162398] PCI: Using ACPI for IRQ routing
    [ 0.168167] PCI: pci_cache_line_size set to 64 bytes
    [ 0.168227] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
    [ 0.168229] e820: reserve RAM buffer [mem 0xc4c65000-0xc7ffffff]
    [ 0.168230] e820: reserve RAM buffer [mem 0xcbd7f000-0xcbffffff]
    [ 0.168231] e820: reserve RAM buffer [mem 0xcc27a000-0xcfffffff]
    [ 0.168232] e820: reserve RAM buffer [mem 0xccf00000-0xcfffffff]
    [ 0.168233] e820: reserve RAM buffer [mem 0x42f000000-0x42fffffff]
    [ 0.168307] NetLabel: Initializing
    [ 0.168308] NetLabel: domain hash size = 128
    [ 0.168309] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.168318] NetLabel: unlabeled traffic allowed by default
    [ 0.168419] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.168423] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
    [ 0.170458] amd_nb: Cannot enumerate AMD northbridges
    [ 0.170476] Switched to clocksource hpet
    [ 0.174431] pnp: PnP ACPI init
    [ 0.174439] ACPI: bus type PNP registered
    [ 0.174645] system 00:00: [io 0x0a00-0x0a2f] has been reserved
    [ 0.174647] system 00:00: [io 0x0a30-0x0a3f] has been reserved
    [ 0.174648] system 00:00: [io 0x0a40-0x0a4f] has been reserved
    [ 0.174651] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.175011] pnp 00:01: [dma 0 disabled]
    [ 0.175120] pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
    [ 0.175428] pnp 00:02: [dma 0 disabled]
    [ 0.175462] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.175568] system 00:03: [io 0x0680-0x069f] has been reserved
    [ 0.175570] system 00:03: [io 0xffff] has been reserved
    [ 0.175571] system 00:03: [io 0xffff] has been reserved
    [ 0.175573] system 00:03: [io 0xffff] has been reserved
    [ 0.175574] system 00:03: [io 0x1800-0x18fe] could not be reserved
    [ 0.175576] system 00:03: [io 0x164e-0x164f] has been reserved
    [ 0.175577] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.175634] system 00:04: [io 0x0800-0x087f] has been reserved
    [ 0.175636] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.175659] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.175686] system 00:06: [io 0x1854-0x1857] has been reserved
    [ 0.175688] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.175853] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.175855] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.175856] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.175858] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.175859] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.175861] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
    [ 0.175862] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.175864] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.175865] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.175867] system 00:07: [mem 0xf7fe0000-0xf7ffffff] has been reserved
    [ 0.175869] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.175903] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
    [ 0.175904] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
    [ 0.175906] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
    [ 0.175907] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
    [ 0.175909] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
    [ 0.175910] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
    [ 0.175912] system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
    [ 0.175913] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.176100] system 00:09: [io 0xff00-0xfffe] has been reserved
    [ 0.176102] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.176862] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
    [ 0.176864] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
    [ 0.176865] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
    [ 0.176867] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.177422] pnp: PnP ACPI: found 11 devices
    [ 0.177423] ACPI: bus type PNP unregistered
    [ 0.185055] pci 0000:00:1b.0: PCI bridge to [bus 01]
    [ 0.185063] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.185066] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
    [ 0.185069] pci 0000:00:1c.0: bridge window [mem 0xf7200000-0xf72fffff]
    [ 0.185071] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
    [ 0.185075] pci 0000:00:1c.5: PCI bridge to [bus 03]
    [ 0.185081] pci 0000:04:00.0: PCI bridge to [bus 05]
    [ 0.185084] pci 0000:04:00.0: bridge window [io 0xd000-0xdfff]
    [ 0.185090] pci 0000:04:00.0: bridge window [mem 0xf7100000-0xf71fffff]
    [ 0.185099] pci 0000:00:1c.6: PCI bridge to [bus 04-05]
    [ 0.185101] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
    [ 0.185104] pci 0000:00:1c.6: bridge window [mem 0xf7100000-0xf71fffff]
    [ 0.185109] pci 0000:06:00.0: PCI bridge to [bus 07]
    [ 0.185112] pci 0000:06:00.0: bridge window [io 0xc000-0xcfff]
    [ 0.185118] pci 0000:06:00.0: bridge window [mem 0xf7000000-0xf70fffff]
    [ 0.185130] pci 0000:00:1c.7: PCI bridge to [bus 06-07]
    [ 0.185131] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
    [ 0.185134] pci 0000:00:1c.7: bridge window [mem 0xf7000000-0xf70fffff]
    [ 0.185139] pci 0000:00:1d.0: PCI bridge to [bus 08]
    [ 0.185146] pci 0000:00:1d.1: PCI bridge to [bus 09]
    [ 0.185153] pci 0000:00:1d.2: PCI bridge to [bus 0a]
    [ 0.185160] pci 0000:00:1d.3: PCI bridge to [bus 0b]
    [ 0.185168] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
    [ 0.185169] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
    [ 0.185171] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
    [ 0.185172] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xf7ffffff window]
    [ 0.185174] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
    [ 0.185175] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
    [ 0.185176] pci_bus 0000:02: resource 1 [mem 0xf7200000-0xf72fffff]
    [ 0.185178] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
    [ 0.185179] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
    [ 0.185180] pci_bus 0000:04: resource 1 [mem 0xf7100000-0xf71fffff]
    [ 0.185182] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
    [ 0.185183] pci_bus 0000:05: resource 1 [mem 0xf7100000-0xf71fffff]
    [ 0.185184] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
    [ 0.185185] pci_bus 0000:06: resource 1 [mem 0xf7000000-0xf70fffff]
    [ 0.185187] pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
    [ 0.185188] pci_bus 0000:07: resource 1 [mem 0xf7000000-0xf70fffff]
    [ 0.185208] NET: Registered protocol family 2
    [ 0.185374] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.185526] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.185596] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.185605] TCP: reno registered
    [ 0.185619] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.185652] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.185696] NET: Registered protocol family 1
    [ 0.185709] pci 0000:00:02.0: Boot video device
    [ 0.186033] PCI: CLS 64 bytes, default 64
    [ 0.186057] Unpacking initramfs...
    [ 0.374080] Freeing initrd memory: 20180k freed
    [ 0.375530] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.375533] software IO TLB [mem 0xc7d7f000-0xcbd7f000] (64MB) mapped at [ffffa0aa47d7f000-ffffa0aa4bd7efff]
    [ 0.375600] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
    [ 0.375601] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
    [ 0.375602] RAPL PMU: hw unit of domain package 2^-14 Joules
    [ 0.375603] RAPL PMU: hw unit of domain dram 2^-14 Joules
    [ 0.375604] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
    [ 0.375605] RAPL PMU: hw unit of domain psys 2^-14 Joules
    [ 0.376115] sha1_ssse3: Using AVX2 optimized SHA-1 implementation
    [ 0.376168] sha256_ssse3: Using AVX2 optimized SHA-256 implementation
    [ 0.376414] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 0.376423] Initialise system trusted keyring
    [ 0.376435] audit: initializing netlink socket (disabled)
    [ 0.376442] type=2000 audit(1600979224.370:1): initialized
    [ 0.398242] HugeTLB registered 1 GB page size, pre-allocated 0 pages
    [ 0.398244] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.399250] zpool: loaded
    [ 0.399252] zbud: loaded
    [ 0.399457] VFS: Disk quotas dquot_6.5.2
    [ 0.399513] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.399698] Key type big_key registered
    [ 0.399700] SELinux: Registering netfilter hooks
    [ 0.400723] NET: Registered protocol family 38
    [ 0.400727] Key type asymmetric registered
    [ 0.400729] Asymmetric key parser 'x509' registered
    [ 0.400751] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
    [ 0.400791] io scheduler noop registered
    [ 0.400794] io scheduler deadline registered (default)
    [ 0.400813] io scheduler cfq registered
    [ 0.400815] io scheduler mq-deadline registered
    [ 0.400817] io scheduler kyber registered
    [ 0.401721] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.401726] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.401757] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 0.401811] intel_idle: MWAIT substates: 0x142120
    [ 0.401812] intel_idle: v0.4.1 model 0x5E
    [ 0.401844] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.401934] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
    [ 0.401936] ACPI: Sleep Button [SLPB]
    [ 0.401959] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 0.401960] ACPI: Power Button [PWRB]
    [ 0.401983] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [ 0.401984] ACPI: Power Button [PWRF]
    [ 0.426608] ACPI: Requesting acpi_cpufreq
    [ 0.451572] thermal LNXTHERM:00: registered as thermal_zone0
    [ 0.451573] ACPI: Thermal Zone [TZ00] (28 C)
    [ 0.451674] thermal LNXTHERM:01: registered as thermal_zone1
    [ 0.451675] ACPI: Thermal Zone [TZ01] (30 C)
    [ 0.451723] GHES: HEST is not enabled!
    [ 0.451795] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [ 0.472491] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.473054] Non-volatile memory driver v1.3
    [ 0.473102] Linux agpgart interface v0.103
    [ 0.473203] crash memory driver: version 1.1
    [ 0.473259] rdac: device handler registered
    [ 0.473307] hp_sw: device handler registered
    [ 0.473310] emc: device handler registered
    [ 0.473359] alua: device handler registered
    [ 0.473414] libphy: Fixed MDIO Bus: probed
    [ 0.473466] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.473469] ehci-pci: EHCI PCI platform driver
    [ 0.473498] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.473501] ohci-pci: OHCI PCI platform driver
    [ 0.473509] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.473621] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.473672] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [ 0.474740] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
    [ 0.474744] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.474761] xhci_hcd 0000:00:14.0: irq 122 for MSI/MSI-X
    [ 0.474877] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 3.10
    [ 0.474879] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 0.474880] usb usb1: Product: xHCI Host Controller
    [ 0.474881] usb usb1: Manufacturer: Linux 3.10.0-1127.19.1.el7.x86_64 xhci-hcd
    [ 0.474883] usb usb1: SerialNumber: 0000:00:14.0
    [ 0.474974] hub 1-0:1.0: USB hub found
    [ 0.474986] hub 1-0:1.0: 12 ports detected
    [ 0.475712] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.475762] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 0.475764] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
    [ 0.475785] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 3.10
    [ 0.475787] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 0.475788] usb usb2: Product: xHCI Host Controller
    [ 0.475789] usb usb2: Manufacturer: Linux 3.10.0-1127.19.1.el7.x86_64 xhci-hcd
    [ 0.475791] usb usb2: SerialNumber: 0000:00:14.0
    [ 0.475880] hub 2-0:1.0: USB hub found
    [ 0.475888] hub 2-0:1.0: 6 ports detected
    [ 0.476266] usbcore: registered new interface driver usbserial_generic
    [ 0.476271] usbserial: USB Serial support registered for generic
    [ 0.476303] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.477039] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.477042] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.477116] mousedev: PS/2 mouse device common for all mice
    [ 0.477277] rtc_cmos 00:05: RTC can wake from S4
    [ 0.477663] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.477746] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.477783] intel_pstate: Intel P-state driver initializing
    [ 0.477991] intel_pstate: HWP enabled
    [ 0.478073] cpuidle: using governor menu
    [ 0.478329] hidraw: raw HID events driver (C) Jiri Kosina
    [ 0.478409] usbcore: registered new interface driver usbhid
    [ 0.478410] usbhid: USB HID core driver
    [ 0.478486] drop_monitor: Initializing network drop monitor service
    [ 0.478531] TCP: cubic registered
    [ 0.478533] Initializing XFRM netlink socket
    [ 0.478609] NET: Registered protocol family 10
    [ 0.478766] NET: Registered protocol family 17
    [ 0.478771] mpls_gso: MPLS GSO support
    [ 0.478916] mce: Using 8 MCE banks
    [ 0.478952] microcode: sig=0x506e3, pf=0x2, revision=0xd6
    [ 0.479026] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
    [ 0.479183] PM: Hibernation image not present or could not be loaded.
    [ 0.479185] Loading compiled-in X.509 certificates
    [ 0.479200] Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
    [ 0.479209] Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
    [ 0.479501] Loaded X.509 cert 'CentOS Linux kernel signing key: b16a91cac9d651464acb7ad9b8ded557cf1aca27'
    [ 0.479514] registered taskstats version 1
    [ 0.481716] Key type trusted registered
    [ 0.483763] Key type encrypted registered
    [ 0.483781] IMA: No TPM chip found, activating TPM-bypass! (rc=-19)
    [ 0.484733] Magic number: 4:870:498
    [ 0.484920] rtc_cmos 00:05: setting system clock to 2020-09-24 20:27:05 UTC (1600979225)
    [ 0.485568] Freeing unused kernel memory: 1980k freed
    [ 0.485692] Write protecting the kernel read-only data: 12288k
    [ 0.486774] Freeing unused kernel memory: 396k freed
    [ 0.488055] Freeing unused kernel memory: 540k freed
    [ 0.491010] random: systemd: uninitialized urandom read (16 bytes read)
    [ 0.491245] random: systemd: uninitialized urandom read (16 bytes read)
    [ 0.491256] random: systemd: uninitialized urandom read (16 bytes read)
    [ 0.492245] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
    [ 0.492357] systemd[1]: Detected architecture x86-64.
    [ 0.492360] systemd[1]: Running in initial RAM disk.
    [ 0.492381] systemd[1]: Set hostname to <localhost.localdomain>.
    [ 0.520177] random: systemd: uninitialized urandom read (16 bytes read)
    [ 0.520194] random: systemd: uninitialized urandom read (16 bytes read)
    [ 0.520217] random: systemd: uninitialized urandom read (16 bytes read)
    [ 0.520253] random: systemd: uninitialized urandom read (16 bytes read)
    [ 0.520783] random: systemd: uninitialized urandom read (16 bytes read)
    [ 0.520871] random: systemd: uninitialized urandom read (16 bytes read)
    [ 0.521124] random: systemd: uninitialized urandom read (16 bytes read)
    [ 0.524606] systemd[1]: Reached target Local File Systems.
    [ 0.524669] systemd[1]: Reached target Swap.
    [ 0.524899] systemd[1]: Created slice Root Slice.
    [ 0.524987] systemd[1]: Listening on Journal Socket.
    [ 0.525077] systemd[1]: Created slice System Slice.
    [ 0.525607] systemd[1]: Starting Apply Kernel Variables...
    [ 0.526112] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 0.526917] systemd[1]: Starting dracut cmdline hook...
    [ 0.527596] systemd[1]: Starting Journal Service...
    [ 0.528237] systemd[1]: Starting Setup Virtual Console...
    [ 0.528342] systemd[1]: Listening on udev Control Socket.
    [ 0.528398] systemd[1]: Reached target Slices.
    [ 0.528501] systemd[1]: Listening on udev Kernel Socket.
    [ 0.528542] systemd[1]: Reached target Sockets.
    [ 0.528584] systemd[1]: Reached target Timers.
    [ 0.529234] systemd[1]: Started Apply Kernel Variables.
    [ 0.529643] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [ 0.530560] systemd[1]: Starting Create Static Device Nodes in /dev...
    [ 0.534395] systemd[1]: Started Create Static Device Nodes in /dev.
    [ 0.576032] systemd[1]: Started Journal Service.
    [ 0.819854] r8169 0000:02:00.0: irq 123 for MSI/MSI-X
    [ 0.827937] libphy: r8169: probed
    [ 0.828364] r8169 0000:02:00.0 eth0: RTL8168g/8111g, 1c:1b:0d:a2:75:86, XID 4c0, IRQ 123
    [ 0.828368] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 0.829149] libata version 3.00 loaded.
    [ 0.847643] ahci 0000:00:17.0: version 3.0
    [ 0.848068] ahci 0000:00:17.0: irq 124 for MSI/MSI-X
    [ 0.858590] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
    [ 0.858595] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
    [ 0.869199] scsi host0: ahci
    [ 0.869313] scsi host1: ahci
    [ 0.869398] scsi host2: ahci
    [ 0.869596] scsi host3: ahci
    [ 0.869674] scsi host4: ahci
    [ 0.869744] scsi host5: ahci
    [ 0.869790] ata1: SATA max UDMA/133 abar m2048@0xf732b000 port 0xf732b100 irq 124
    [ 0.869795] ata2: SATA max UDMA/133 abar m2048@0xf732b000 port 0xf732b180 irq 124
    [ 0.869797] ata3: SATA max UDMA/133 abar m2048@0xf732b000 port 0xf732b200 irq 124
    [ 0.869799] ata4: SATA max UDMA/133 abar m2048@0xf732b000 port 0xf732b280 irq 124
    [ 0.869801] ata5: SATA max UDMA/133 abar m2048@0xf732b000 port 0xf732b300 irq 124
    [ 0.869803] ata6: SATA max UDMA/133 abar m2048@0xf732b000 port 0xf732b380 irq 124
    [ 1.079894] [drm] Replacing VGA console driver
    [ 1.080725] Console: switching to colour dummy device 80x25
    [ 1.080766] i915 0000:00:02.0: irq 125 for MSI/MSI-X
    [ 1.081281] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 1.081282] [drm] Driver supports precise vblank timestamp query.
    [ 1.081952] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 1.082286] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
    [ 1.094419] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0
    [ 1.095964] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 1.096372] acpi device:10: registered as cooling_device9
    [ 1.096434] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
    [ 1.110851] [drm] Cannot find any crtc or sizes
    [ 1.175612] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.175635] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.175657] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.176619] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.176658] ata4: SATA link down (SStatus 4 SControl 300)
    [ 1.176778] ata1.00: ATAPI: DRW-24D5MT, 1.00, max UDMA/133
    [ 1.177192] ata2.00: supports DRM functions and may not be fully accessible
    [ 1.177274] ata3.00: supports DRM functions and may not be fully accessible
    [ 1.177354] ata5.00: ATA-9: ST1000DM003-1ER162, CC61, max UDMA/100
    [ 1.177357] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.177533] ata6: SATA link down (SStatus 4 SControl 300)
    [ 1.177552] ata2.00: ATA-9: Samsung SSD 750 EVO 120GB, MAT01B6Q, max UDMA/133
    [ 1.177555] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 1.177584] ata3.00: ATA-9: Samsung SSD 750 EVO 120GB, MAT01B6Q, max UDMA/133
    [ 1.177586] ata3.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 1.178077] ata5.00: configured for UDMA/100
    [ 1.178184] ata1.00: configured for UDMA/133
    [ 1.178276] ata2.00: supports DRM functions and may not be fully accessible
    [ 1.178338] ata3.00: supports DRM functions and may not be fully accessible
    [ 1.178885] ata2.00: configured for UDMA/133
    [ 1.178922] ata3.00: configured for UDMA/133
    [ 1.180270] scsi 0:0:0:0: CD-ROM ASUS DRW-24D5MT 1.00 PQ: 0 ANSI: 5
    [ 1.193452] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 750 1B6Q PQ: 0 ANSI: 5
    [ 1.207102] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 750 1B6Q PQ: 0 ANSI: 5
    [ 1.219222] scsi 4:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC61 PQ: 0 ANSI: 5
    [ 1.247675] [drm] Cannot find any crtc or sizes
    [ 1.261500] [drm] Cannot find any crtc or sizes
    [ 1.291073] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 1.291269] sd 1:0:0:0: [sda] Write Protect is off
    [ 1.291278] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.291388] sd 2:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 1.291606] sd 2:0:0:0: [sdb] Write Protect is off
    [ 1.291614] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.291729] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 1.291737] sd 4:0:0:0: [sdc] 4096-byte physical blocks
    [ 1.291863] sd 4:0:0:0: [sdc] Write Protect is off
    [ 1.291871] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 1.291899] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.291937] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.292050] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.294627] sdb: sdb1 sdb2 sdb3
    [ 1.295546] sd 2:0:0:0: [sdb] Attached SCSI disk
    [ 1.296430] sda: sda1 sda2 sda3
    [ 1.297336] sd 1:0:0:0: [sda] Attached SCSI disk
    [ 1.304517] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.304524] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.304913] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [ 1.312468] sd 4:0:0:0: [sdc] Attached SCSI disk
    [ 1.342867] random: fast init done
    [ 1.376552] tsc: Refined TSC clocksource calibration: 3695.999 MHz
    [ 1.376578] Switched to clocksource tsc
    [ 1.423341] md/raid1:md127: active with 2 out of 2 mirrors
    [ 1.423361] md127: detected capacity change from 0 to 16777216000
    [ 1.424019] md/raid1:md126: active with 2 out of 2 mirrors
    [ 1.425039] md/raid1:md125: active with 2 out of 2 mirrors
    [ 1.431664] md126: detected capacity change from 0 to 1074724864
    [ 1.432684] md125: detected capacity change from 0 to 102105088000
    [ 1.525965] EXT4-fs (md125): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.740909] systemd-journald[115]: Received SIGTERM from PID 1 (systemd).
    [ 1.788333] SELinux: Disabled at runtime.
    [ 1.788345] SELinux: Unregistering netfilter hooks
    [ 1.833517] type=1404 audit(1600979226.847:2): selinux=0 auid=4294967295 ses=4294967295
    [ 1.860962] ip_tables: (C) 2000-2006 Netfilter Core Team
    [ 1.861390] systemd[1]: Inserted module 'ip_tables'
    [ 1.978137] EXT4-fs (md125): re-mounted. Opts: (null)
    [ 1.991366] systemd-journald[617]: Received request to flush runtime journal from PID 1
    [ 2.007796] random: crng init done
    [ 2.085052] parport_pc 00:01: reported by Plug and Play ACPI
    [ 2.085086] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP]
    [ 2.128465] sr 0:0:0:0: Attached scsi generic sg0 type 5
    [ 2.128844] sd 1:0:0:0: Attached scsi generic sg1 type 0
    [ 2.128905] sd 2:0:0:0: Attached scsi generic sg2 type 0
    [ 2.128949] sd 4:0:0:0: Attached scsi generic sg3 type 0
    [ 2.130830] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
    [ 2.130986] mei_me 0000:00:16.0: irq 126 for MSI/MSI-X
    [ 2.141955] dahdi: loading out-of-tree module taints kernel.
    [ 2.143115] dahdi: module verification failed: signature and/or required key missing - tainting kernel
    [ 2.145029] Modular ISDN core version 1.1.29
    [ 2.145071] dahdi: Version: 2.10.2
    [ 2.145346] NET: Registered protocol family 34
    [ 2.145680] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 2.145686] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
    [ 2.148681] dahdi: Telephony Interface Registered on major 196
    [ 2.157088] cryptd: max_cpu_qlen set to 1000
    [ 2.164116] dahdi: Warning: Span WCTDM/4 didn't specify a spantype. Please fix driver!
    [ 2.164825] Freshmaker version: b0
    [ 2.165744] Freshmaker passed register test
    [ 2.172311] mISDN: HFC-multi driver 2.03
    [ 2.172329] Unknown HFC multiport controller (vendor:1397 device:08b4 subvendor:1397 subdevice:b51b)
    [ 2.172333] Please contact the driver maintainer for support.
    [ 2.174275] AVX2 version of gcm_enc/dec engaged.
    [ 2.174277] AES CTR mode by8 optimization enabled
    [ 2.202905] allob4xxp 0000:07:00.0: probe called for b4xx...
    [ 2.203028] allob4xxp 0000:07:00.0: Identified ALLO QuadBri (controller rev 1) at 000000000001c000, IRQ 19
    [ 2.204248] Inside zarlink_CEM_ec_init
    [ 2.204250] Gpio: 04
    [ 2.204251] EC_Insert: 0
    [ 2.204252] EC_Type: 4
    [ 2.204255] THE GPIO is:04
    [ 2.204256] Chip Type: zl38065/zl50232
    [ 2.204257] zarlink_LEC_chip: Select chip ZL38065/ZL50232 with 32 channels
    [ 2.204258] zarlink_LEC_chip: Inserting EchoCanceler module. 32 channels
    [ 2.204723] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
    [ 2.204756] alg: No test for __generic-gcm-aes-aesni (__driver-generic-gcm-aes-aesni)
    [ 2.207100] zarlink_LEC_chip: readreg - page: 00 reg: 08, val: 9f
    [ 2.207102] TESTING : 9f
    [ 2.207227] zarlink_LEC_chip: readreg - page: 00 reg: 09, val: d4
    [ 2.207228] TESTING : d4
    [ 2.207354] zarlink_LEC_chip: readreg - page: 00 reg: 1d, val: c4
    [ 2.207355] TESTING : c4
    [ 2.215942] THE GPIO is:04
    [ 2.215943] Zarlink E/C Module inserted
    [ 2.217319] allob4xxp 0000:07:00.0: Port 1: TE mode
    [ 2.217435] allob4xxp 0000:07:00.0: Port 2: TE mode
    [ 2.217551] allob4xxp 0000:07:00.0: Port 3: TE mode
    [ 2.217667] allob4xxp 0000:07:00.0: Port 4: TE mode
    [ 2.228847] allob4xxp 0000:07:00.0: Did not do the highestorder stuff
    [ 2.238093] ppdev: user-space parallel port driver
    [ 2.257602] iTCO_vendor_support: vendor-support=0
    [ 2.259080] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 2.259129] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
    [ 2.259785] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.265835] Adding 16383996k swap on /dev/md127. Priority:-2 extents:1 across:16383996k SSFS
    [ 2.308195] intel_rapl: Found RAPL domain package
    [ 2.308199] intel_rapl: Found RAPL domain core
    [ 2.308201] intel_rapl: Found RAPL domain uncore
    [ 2.308204] intel_rapl: Found RAPL domain dram
    [ 2.328479] allob4xxp 0000:07:00.0: new card sync source: port 1
    [ 2.441299] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
    [ 2.446024] snd_hda_intel 0000:00:1f.3: irq 127 for MSI/MSI-X
    [ 2.475479] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
    [ 2.475482] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 2.475484] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
    [ 2.475485] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
    [ 2.475486] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
    [ 2.475487] snd_hda_codec_realtek hdaudioC0D0: inputs:
    [ 2.475489] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
    [ 2.475491] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
    [ 2.475492] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
    [ 2.501835] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
    [ 2.502152] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
    [ 2.502642] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
    [ 2.502924] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
    [ 2.502981] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
    [ 2.503041] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
    [ 2.503096] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
    [ 2.503148] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
    [ 2.503200] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
    [ 2.504853] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
    [ 2.665687] Module 0: Not installed
    [ 2.867196] Module 1: Installed -- AUTO FXO (FCC mode)
    [ 2.867432] Module 2: Not installed
    [ 2.867676] Module 3: Not installed
    [ 2.868514] Found a Wildcard TDM: Wildcard TDM400P REV E/F (1 modules)
    [ 2.877547] resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:08 [mem 0xfdb00000-0xfdffffff]
    [ 2.877551] caller pmc_core_probe+0x8f/0x1000 [intel_pmc_core] mapping multiple BARs
    [ 2.877561] intel_pmc_core: initialized
    [ 2.882173] EXT4-fs (sdc): mounting ext3 file system using the ext4 subsystem
    [ 2.920402] EXT4-fs (md126): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.921681] EXT4-fs (sdc): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.927036] device-mapper: uevent: version 1.0.3
    [ 2.927287] device-mapper: ioctl: 4.37.1-ioctl (2018-04-03) initialised: dm-devel@redhat.com
    [ 3.009507] type=1305 audit(1600979228.023:3): audit_pid=873 old=0 auid=4294967295 ses=4294967295 res=1
    [ 3.517955] ip6_tables: (C) 2000-2006 Netfilter Core Team
    [ 3.556355] Ebtables v2.0 registered
    [ 3.569157] Netfilter messages via NETLINK v0.30.
    [ 3.573031] ip_set: protocol 7
    [ 3.599964] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
    [ 3.657560] Generic Realtek PHY r8169-200:00: attached PHY driver [Generic Realtek PHY] (mii_bushy_addr=r8169-200:00, irq=-2)
    [ 3.758274] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
    [ 3.765948] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
    [ 3.884173] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
    [ 6.690624] libphy: r8169-200:00 - Link is Up - 1000/Full
    [ 6.690631] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
    [ 7.406456] ahci 0000:00:17.0: port does not support device sleep
    [ 7.408458] ahci 0000:00:17.0: port does not support device sleep
    [ 32.728211] allob4xxp 0000:07:00.0: new card sync source: port 1
    [ 5933.895352] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
    [58123.521661] dahdi_echocan_mg2: Registered echo canceler 'MG2'
    [58123.536099] dahdi_devices pci:0000:05:00.0: local span 1 is already assigned span 1
    [58123.542125] dahdi_devices pci:0000:07:00.0: local span 1 is already assigned span 2
    [58123.542131] dahdi_devices pci:0000:07:00.0: local span 2 is already assigned span 3
    [58123.542135] dahdi_devices pci:0000:07:00.0: local span 3 is already assigned span 4
    [58123.542141] dahdi_devices pci:0000:07:00.0: local span 4 is already assigned span 5
    [58129.579100] allob4xxp 0000:07:00.0: new card sync source: port 1
    [58203.266209] dahdi_devices pci:0000:05:00.0: local span 1 is already assigned span 1
    [58203.271454] dahdi_devices pci:0000:07:00.0: local span 1 is already assigned span 2
    [58203.271456] dahdi_devices pci:0000:07:00.0: local span 2 is already assigned span 3
    [58203.271458] dahdi_devices pci:0000:07:00.0: local span 3 is already assigned span 4
    [58203.271459] dahdi_devices pci:0000:07:00.0: local span 4 is already assigned span 5
    [58661.087504] dahdi_devices pci:0000:05:00.0: local span 1 is already assigned span 1
    [58661.093252] dahdi_devices pci:0000:07:00.0: local span 1 is already assigned span 2
    [58661.093258] dahdi_devices pci:0000:07:00.0: local span 2 is already assigned span 3
    [58661.093263] dahdi_devices pci:0000:07:00.0: local span 3 is already assigned span 4
    [58661.093264] dahdi_devices pci:0000:07:00.0: local span 4 is already assigned span 5

    [root@PBX ~]# dahdi_cfg -vvv
    DAHDI Tools Version - 2.11.0

    DAHDI Version: 2.10.2
    Echo Canceller(s): HWEC, MG2
    Configuration
    ======================

    SPAN 2: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)
    SPAN 3: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)
    SPAN 4: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)
    SPAN 5: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)

    Channel map:

    Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02)
    Channel 05: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 05)
    Channel 06: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 06)
    Channel 07: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 07)
    Channel 08: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 08)
    Channel 09: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 09)
    Channel 10: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 10)
    Channel 11: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 11)
    Channel 12: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 12)
    Channel 13: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 13)
    Channel 14: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 14)
    Channel 15: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 15)
    Channel 16: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 16)

    13 channels to configure.

    Setting echocan for channel 2 to mg2
    Setting echocan for channel 5 to mg2
    Setting echocan for channel 6 to mg2
    Setting echocan for channel 7 to none
    Setting echocan for channel 8 to mg2
    Setting echocan for channel 9 to mg2
    Setting echocan for channel 10 to none
    Setting echocan for channel 11 to mg2
    Setting echocan for channel 12 to mg2
    Setting echocan for channel 13 to none
    Setting echocan for channel 14 to mg2
    Setting echocan for channel 15 to mg2
    Setting echocan for channel 16 to none

    [root@PBX ~]# dahdi_span_assignments list
    1:1:1 [] @PCI_Bus_05_Slot_01 /sys/devices/pci0000:00/0000:00:1c.6/0000:04:00.0/0000:05:00.0/pci:0000:05:00.0
    1:2:5 [] @PCI_Bus_07_Slot_01 /sys/devices/pci0000:00/0000:00:1c.7/0000:06:00.0/0000:07:00.0/pci:0000:07:00.0
    2:3:8 [] @PCI_Bus_07_Slot_01 /sys/devices/pci0000:00/0000:00:1c.7/0000:06:00.0/0000:07:00.0/pci:0000:07:00.0
    3:4:11 [] @PCI_Bus_07_Slot_01 /sys/devices/pci0000:00/0000:00:1c.7/0000:06:00.0/0000:07:00.0/pci:0000:07:00.0
    4:5:14 [] @PCI_Bus_07_Slot_01 /sys/devices/pci0000:00/0000:00:1c.7/0000:06:00.0/0000:07:00.0/pci:0000:07:00.0



    PBX*CLI>
    [2020-09-25 17:10:56] WARNING[26724]: chan_dahdi.c:19034 process_dahdi: Ignoring any changes to 'signalling' (on reload) at line 11.
    [2020-09-25 17:10:56] WARNING[26724]: chan_dahdi.c:19034 process_dahdi: Ignoring any changes to 'switchtype' (on reload) at line 12.
    [2020-09-25 17:10:56] WARNING[26724]: chan_dahdi.c:19034 process_dahdi: Ignoring any changes to 'pridialplan' (on reload) at line 13.
    [2020-09-25 17:10:56] WARNING[26724]: chan_dahdi.c:19034 process_dahdi: Ignoring any changes to 'prilocaldialplan' (on reload) at line 14.
    [2020-09-25 17:10:56] WARNING[26724]: chan_dahdi.c:12467 mkintf: Attempt to configure channel 5 with signaling Unknown signalling -1 ignored because it is already configured to be ISDN BRI Point to MultiPoint.
    [2020-09-25 17:10:56] WARNING[26724]: chan_dahdi.c:12467 mkintf: Attempt to configure channel 6 with signaling Unknown signalling -1 ignored because it is already configured to be ISDN BRI Point to MultiPoint.
    [2020-09-25 17:10:56] WARNING[26724]: chan_dahdi.c:19034 process_dahdi: Ignoring any changes to 'signalling' (on reload) at line 21.
    [2020-09-25 17:10:56] WARNING[26724]: chan_dahdi.c:19034 process_dahdi: Ignoring any changes to 'switchtype' (on reload) at line 22.
    [2020-09-25 17:10:56] WARNING[26724]: chan_dahdi.c:19034 process_dahdi: Ignoring any changes to 'pridialplan' (on reload) at line 23.
    [2020-09-25 17:10:56] WARNING[26724]: chan_dahdi.c:19034 process_dahdi: Ignoring any changes to 'prilocaldialplan' (on reload) at line 24.
    [2020-09-25 17:10:56] WARNING[26724]: chan_dahdi.c:12467 mkintf: Attempt to configure channel 8 with signaling Unknown signalling -1 ignored because it is already configured to be ISDN BRI Point to MultiPoint.
    [2020-09-25 17:10:56] WARNING[26724]: chan_dahdi.c:7342 handle_alarms: Detected alarm on channel 8: Red Alarm
    [2020-09-25 17:10:56] WARNING[26724]: chan_dahdi.c:12467 mkintf: Attempt to configure channel 9 with signaling Unknown signalling -1 ignored because it is already configured to be ISDN BRI Point to MultiPoint.
    [2020-09-25 17:10:56] WARNING[26724]: chan_dahdi.c:7342 handle_alarms: Detected alarm on channel 9: Red Alarm
    [2020-09-25 17:10:56] WARNING[26724]: chan_dahdi.c:19034 process_dahdi: Ignoring any changes to 'signalling' (on reload) at line 31.
    [2020-09-25 17:10:56] WARNING[26724]: chan_dahdi.c:19034 process_dahdi: Ignoring any changes to 'switchtype' (on reload) at line 32.
    [2020-09-25 17:10:56] WARNING[26724]: chan_dahdi.c:19034 process_dahdi: Ignoring any changes to 'pridialplan' (on reload) at line 33.
    [2020-09-25 17:10:56] WARNING[26724]: chan_dahdi.c:19034 process_dahdi: Ignoring any changes to 'prilocaldialplan' (on reload) at line 34.
    [2020-09-25 17:10:56] ERROR[26724]: chan_dahdi.c:17518 build_channels: Unable to reconfigure channel '1-2'
    [2020-09-25 17:10:56] WARNING[26724]: chan_dahdi.c:17725 process_dahdi: Channel '1-2' failure ignored: ignore_failed_channels.
    [2020-09-25 17:10:56] WARNING[26724]: chan_dahdi.c:19034 process_dahdi: Ignoring any changes to 'signalling' (on reload) at line 40.
    [2020-09-25 17:10:56] WARNING[26724]: chan_dahdi.c:12467 mkintf: Attempt to configure channel 2 with signaling Unknown signalling -1 ignored because it is already configured to be FXS Kewlstart.

    - - - Updated - - -

    Screenshots από την διαχείρηση του FreePBX

    Πατήστε στην εικόνα για να τη δείτε σε μεγέθυνση. 

Όνομα:  dahdi-bri-span-1.png 
Εμφανίσεις:  6 
Μέγεθος:  47,9 KB 
ID: 219173
    Πατήστε στην εικόνα για να τη δείτε σε μεγέθυνση. 

Όνομα:  dahdi-conf-bri.png 
Εμφανίσεις:  4 
Μέγεθος:  57,2 KB 
ID: 219172
    Πατήστε στην εικόνα για να τη δείτε σε μεγέθυνση. 

Όνομα:  dahdi-global-settings.png 
Εμφανίσεις:  3 
Μέγεθος:  67,9 KB 
ID: 219175
    Πατήστε στην εικόνα για να τη δείτε σε μεγέθυνση. 

Όνομα:  dahdi-module-settings.png 
Εμφανίσεις:  3 
Μέγεθος:  27,3 KB 
ID: 219176
    Πατήστε στην εικόνα για να τη δείτε σε μεγέθυνση. 

Όνομα:  modprobe-settings-1.png 
Εμφανίσεις:  3 
Μέγεθος:  41,3 KB 
ID: 219177
    Πατήστε στην εικόνα για να τη δείτε σε μεγέθυνση. 

Όνομα:  modprobe-settings-2.png 
Εμφανίσεις:  2 
Μέγεθος:  39,6 KB 
ID: 219178
    Πατήστε στην εικόνα για να τη δείτε σε μεγέθυνση. 

Όνομα:  dahdi-conf-fxo.png 
Εμφανίσεις:  3 
Μέγεθος:  19,7 KB 
ID: 219179

    - - - Updated - - -

    Output of lspci -n
    00:00.0 0600: 8086:190f (rev 07)
    00:02.0 0300: 8086:1912 (rev 06)
    00:08.0 0880: 8086:1911
    00:14.0 0c03: 8086:a2af
    00:16.0 0780: 8086:a2ba
    00:17.0 0106: 8086:a282
    00:1b.0 0604: 8086:a2eb (rev f0)
    00:1c.0 0604: 8086:a294 (rev f0)
    00:1c.5 0604: 8086:a295 (rev f0)
    00:1c.6 0604: 8086:a296 (rev f0)
    00:1c.7 0604: 8086:a297 (rev f0)
    00:1d.0 0604: 8086:a298 (rev f0)
    00:1d.1 0604: 8086:a299 (rev f0)
    00:1d.2 0604: 8086:a29a (rev f0)
    00:1d.3 0604: 8086:a29b (rev f0)
    00:1f.0 0601: 8086:a2c8
    00:1f.2 0580: 8086:a2a1
    00:1f.3 0403: 8086:a2f0
    00:1f.4 0c05: 8086:a2a3
    02:00.0 0200: 10ec:8168 (rev 0c)
    04:00.0 0604: 1b21:1080 (rev 04)
    05:00.0 0280: e159:0001 (rev 01)
    06:00.0 0604: 10b5:8112 (rev aa)
    07:00.0 0204: 1397:08b4 (rev 01)

    Output of rpm -qa | grep dahdi
    dahdi-tools-libs-2.11.1-16.el7.x86_64
    dahdi-tools-2.11.1-16.el7.x86_64

    Output of rpm -qa | grep kernel
    kernel-3.10.0-514.6.1.el7.x86_64
    kernel-tools-libs-3.10.0-1127.19.1.el7.x86_64
    kernel-devel-3.10.0-1127.19.1.el7.x86_64
    kernel-3.10.0-514.el7.x86_64
    kernel-devel-3.10.0-514.6.1.el7.x86_64
    kernel-tools-3.10.0-1127.19.1.el7.x86_64

  4. #4
    Εγγραφή
    15-10-2006
    Μηνύματα
    2.002
    Downloads
    24
    Uploads
    0
    Τέτοιο κατεβατό δεν έχω ξαναδεί.
    Θα μπορούσες να το βάλεις σε spoiler ή σε αρχείο txt
    .

  5. #5
    Εγγραφή
    11-09-2017
    Μηνύματα
    1.638
    Downloads
    1
    Uploads
    0
    ISP
    None
    Έχεις μια κάρτα με αναλογικά, το σύστημα βλέπει μόνο ένα fxo, μήπως είχες και κάποιο άλλο πάνω και έχει καεί;

  6. #6
    Εγγραφή
    05-02-2013
    Μηνύματα
    5
    Downloads
    1
    Uploads
    0
    Τύπος
    ADSL2+
    Ταχύτητα
    102400/10240
    ISP
    COSMOTE
    Router
    Speedport Plus
    Στην αναλογική έχει ένα fxo module μόνο.

    Το Σάββατο έκατσα και αφαίρεσα εντελώς το dahdi, έκανα reboot, πέρασα ξανά το dahdi 2.10.2 από το επίσημo site του κατασκευαστή της κάρτας. To dahdi ξεκίνησε κανονικά και με ένα core reload μπορούσα να λάβω και να κάνω κλήσεις κανονικά. Μετά από restart το dahdi service έβγαζε σφάλμα με τα spans. Έτρεξα dahdi_genconf -vvvvv και έκανα reload το dahdi και τον asterisk και οι κλήσεις ήταν πάλι οκ. Έκανε 4 reboot στην σειρά αλλά όλα ήταν οκ. Στο 5 reboot τα span έδειχναν unconfigured και το dahdi έβγαζε τα ίδια ακριβώς σφάλματα. Έτρεξα ξανά dahdi_genconf -vvvvv και reload το dahdi και τον asterisk και όλα ήταν πάλι οκ. Με έχει τρελάνει εντελώς.

  7. #7
    Εγγραφή
    11-09-2017
    Μηνύματα
    1.638
    Downloads
    1
    Uploads
    0
    ISP
    None
    Άσχετο το έχεις πάνω σε UPS, αν ναι τι μάρκα; Αν δεν το έχεις σε ups τότε βγάλε την αναλογική κάρτα και δοκίμασε πάλι.

Bookmarks

Bookmarks

Δικαιώματα - Επιλογές

  • Δεν μπορείτε να δημοσιεύσετε νέα θέματα
  • Δεν μπορείτε να δημοσιεύσετε νέα μηνύματα
  • Δεν μπορείτε να αναρτήσετε συνημμένα
  • Δεν μπορείτε να επεξεργαστείτε τα μηνύματα σας
  •  
  • Τα BB code είναι σε λειτουργία
  • Τα Smilies είναι σε λειτουργία
  • Το [IMG] είναι σε λειτουργία
  • Το [VIDEO] είναι σε λειτουργία
  • Το HTML είναι εκτός λειτουργίας