Huawei E220 @ archlinux

[graphi]

Έχω ένα Huawei E220 από την Wind το οποίο είναι plug n play και μαζί με τις ρυθμίσεις του ppp από gentoo-wiki δουλεύει κανονικά.

Αυτά μέχρι πριν το update. Πλέων συνδέεται στο internet (αναμμένο led) αλλά δεν μπορώ να κατεβάσω καμία ιστοσελίδα. Ping δεν μπορούσα να κάνω ούτε πριν το update και φυσικά ούτε τώρα.

Παρακαλώ, θέλω έστω και τις υποψίες για λύση του προβλήματος.

Το update /var/log/pacman.log:

Spoiler:

[...]
[2008-03-22 13:01] starting full system upgrade
[2008-03-22 13:04] upgraded archlinux-menus (1.2-1 -> 2.0-1)
[2008-03-22 13:04] upgraded e2fsprogs (1.40.7-1 -> 1.40.8-1)
[2008-03-22 13:04] upgraded cryptsetup (1.0.5-6 -> 1.0.6-1)
[2008-03-22 13:04]
[2008-03-22 13:04] ==> installation notes:
[2008-03-22 13:04]     ----------------------------------------
[2008-03-22 13:04]     For the spell-check plugin to work you need
[2008-03-22 13:04]     to install gnome-python-extras, gtkspell and
[2008-03-22 13:04]     a working aspell (including dictionaries) installation.
[2008-03-22 13:04]
[2008-03-22 13:04] upgraded emesene (r999-2 -> 1.0rc-1)
[2008-03-22 13:04] upgraded espeak (1.29-1 -> 1.36-2)
[2008-03-22 13:04]
[2008-03-22 13:04]   This version of perl follows the new perl directory hierarchy (see
[2008-03-22 13:04]   http://wiki.archlinux.org/index.php/Perl_Policy).
[2008-03-22 13:04]
[2008-03-22 13:04]   - The perl package and its modules install in the core_perl directories
[2008-03-22 13:04]   - Perl modules provided by Arch Linux install in vendor_perl directories
[2008-03-22 13:04]   - CPAN/CPANPLUS installs should be placed in site_perl directories
[2008-03-22 13:04]   - Older modules in the 'current' directory should still work
[2008-03-22 13:04]   - Programs with embedded perl interpreters need to be rebuilt
[2008-03-22 13:04]
[2008-03-22 13:04]   Users of the CPAN or CPANPLUS shells should modify the configuration
[2008-03-22 13:04]   to use the site_perl directories.  Under the CPAN shell use:
[2008-03-22 13:04]     o conf makepl_arg INSTALLDIRS=site
[2008-03-22 13:04]     o conf mbuildpl_arg installdirs=site
[2008-03-22 13:04]   Under the CPANPLUS shell:
[2008-03-22 13:04]     s conf buildflags installdirs=site
[2008-03-22 13:04]     s conf makemakerflags INSTALLDIRS=site
[2008-03-22 13:04]   Then save the configuration.
[2008-03-22 13:04]
[2008-03-22 13:04]   The following official packages can be removed since the modules are
[2008-03-22 13:04]   now included in the standard perl library:
[2008-03-22 13:04]     perl-archive-tar  perl-compress-raw-zlib  perl-compress-zlib
[2008-03-22 13:04]     perl-extutils-cbuilder  perl-io-compress-base  perl-io-compress-zlib
[2008-03-22 13:04]     perl-io-zlib  perl-module-pluggable  perl-pod-escapes  perl-pod-simple
[2008-03-22 13:04]     perl-module-build  perl-version
[2008-03-22 13:04]
[2008-03-22 13:04]   These community packages are also included in the standard perl library:
[2008-03-22 13:04]     perl-archive-extract  perl-cpanplus  perl-digest-sha  perl-file-fetch
[2008-03-22 13:04]     perl-extutils-parsexs  perl-ipc-cmd  perl-locale-maketext-simple
[2008-03-22 13:04]     perl-log-message  perl-log-message-simple  perl-module-corelist
[2008-03-22 13:04]     perl-module-load  perl-module-load-conditional  perl-module-loaded
[2008-03-22 13:04]     perl-module-pluggable  perl-object-accessor  perl-params-check
[2008-03-22 13:04]     perl-term-ui  perl-time-piece
[2008-03-22 13:04]
[2008-03-22 13:04] upgraded perl (5.8.8-9 -> 5.10.0-3)
[2008-03-22 13:04] upgraded perl-locale-gettext (1.05-2 -> 1.05-3)
[2008-03-22 13:04] upgraded mesa (7.0.3rc1-1 -> 7.0.3rc2-1)
[2008-03-22 13:04] upgraded sdl (1.2.12-1 -> 1.2.13-1)
[2008-03-22 13:04] upgraded sdl_image (1.2.6-1 -> 1.2.6-2)
[2008-03-22 13:04] upgraded sdl_perl (2.1.3-1 -> 2.1.3-2)
[2008-03-22 13:04] upgraded frozen-bubble (2.1.0-1 -> 2.1.0-2)
[2008-03-22 13:04] ==> Updating icon cache.....
[2008-03-22 13:04] upgraded fusion-icon (20071111-1 -> 20080313-1)
[2008-03-22 13:04] upgraded glest-data (3.0.0-1 -> 3.1.2-1)
[2008-03-22 13:04] upgraded glest (3.0.0-2 -> 3.1.2-1)
[2008-03-22 13:04] ==> To add the gnuplot mode in Emacs, add the content of /usr/share/emacs/site-lisp/dotemacs to your ~/.emacs file.
[2008-03-22 13:04] Updating TeX tree...
[2008-03-22 13:04] upgraded gnuplot (4.2.2-1 -> 4.2.3-1)
[2008-03-22 13:04] upgraded grub (0.97-11 -> 0.97-12)
[2008-03-22 13:04] upgraded guifications (2.14-1 -> 2.16-1)
[2008-03-22 13:04] upgraded imagemagick (6.3.8.0-1 -> 6.3.8.0-2)
[2008-03-22 13:04] upgraded udev (118-5 -> 118-7)
[2008-03-22 13:04] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
[2008-03-22 13:04] -----------------------------------------------------------
[2008-03-22 13:04] IMPORTANT NOTICE FOR ENCRYPTION USERS
[2008-03-22 13:04]
[2008-03-22 13:04] The "password" column in /etc/crypttab has now
[2008-03-22 13:04] two special keywords:
[2008-03-22 13:04] - ASK  ask for a passphrase on boot
[2008-03-22 13:04] - SWAP use a random key and create swapspace
[2008-03-22 13:04]        This is particularly dangerous, as the
[2008-03-22 13:04]        volume in question will be overwritten
[2008-03-22 13:04]        If you use SWAP as your passphrase (which
[2008-03-22 13:04]        is insecure anyway), be sure to remove it
[2008-03-22 13:04]        from /etc/crypttab to avoid dataloss!
[2008-03-22 13:04]
[2008-03-22 13:04] See /etc/crypttab(.pacnew) for more information.
[2008-03-22 13:04] -----------------------------------------------------------
[2008-03-22 13:04] Attention netcfg users: netcfg is no longer included as
[2008-03-22 13:04] part of the initscripts package.
[2008-03-22 13:04] Be aware that rc.conf's NET_PROFILES has changed to
[2008-03-22 13:04] NETWORKS, and that netcfg must be installed separately.
[2008-03-22 13:04] For more info, see the netcfg man page.
[2008-03-22 13:04] -----------------------------------------------------------
[2008-03-22 13:04] upgraded initscripts (2007.11-2 -> 2008.03-4)
[2008-03-22 13:04] upgraded kdbg (2.0.5-1 -> 2.1.0-1)
[2008-03-22 13:04] upgraded klibc-extras (2.3-2 -> 2.4-1)
[2008-03-22 13:04] upgraded klibc-module-init-tools (3.2.2-2 -> 3.2.2-3)
[2008-03-22 13:04] upgraded libcdio (0.79-1 -> 0.80-1)
[2008-03-22 13:04] upgraded libwpd (0.8.13-1 -> 0.8.14-1)
[2008-03-22 13:04] upgraded mercury (1.9-1 -> 1.9-2)
[2008-03-22 13:04] upgraded net-snmp (5.4.1-2 -> 5.4.1-3)
[2008-03-22 13:04] upgraded openoffice-el (2.4.0rc1-1 -> 2.4.0rc6-1)
[2008-03-22 13:04] upgraded pcmciautils (014-3 -> 014-4)
[2008-03-22 13:04] upgraded perl-net-ssleay (1.30-1 -> 1.30-2)
[2008-03-22 13:04] upgraded perl-io-socket-ssl (1.08-1 -> 1.12-1)
[2008-03-22 13:04] upgraded perl-timedate (1.16-2 -> 1.16-3)
[2008-03-22 13:04] upgraded perlxml (2.34-4 -> 2.36-1)
[2008-03-22 13:04] upgraded perl-xml-simple (2.18-1 -> 2.18-2)
[2008-03-22 13:04] upgraded phpmyadmin (2.11.4-1 -> 2.11.5-1)
[2008-03-22 13:04] upgraded subversion (1.4.5-2 -> 1.4.5-4)
[2008-03-22 13:04] upgraded tls (1.5.0-2 -> 1.5.0-3)
[2008-03-22 13:05] Updating font cache... done.
[2008-03-22 13:05] upgraded ttf-dejavu (2.23-1 -> 2.24-1)
[2008-03-22 13:05] upgraded xkeyboard-config (1.1-1 -> 1.2-1)
[2008-03-22 13:05] upgraded xorg-server (1.4.0.90-6 -> 1.4.0.90-8)
[...]

/var/log/messages.log:

Spoiler:

[...]
Mar 24 10:27:26 GraPhi pppd[4797]: pppd 2.4.4 started by root, uid 0
Mar 24 10:27:29 GraPhi pppd[4797]: Serial connection established.
Mar 24 10:27:29 GraPhi pppd[4797]: Using interface ppp0
Mar 24 10:27:29 GraPhi pppd[4797]: Connect: ppp0 <--> /dev/ttyUSB0
Mar 24 10:27:30 GraPhi pppd[4797]: CHAP authentication succeeded
Mar 24 10:27:30 GraPhi pppd[4797]: CHAP authentication succeeded
Mar 24 10:27:31 GraPhi pppd[4797]: Could not determine remote IP address: defaulting to 10.64.64.64
Mar 24 10:27:31 GraPhi pppd[4797]: local  IP address 212.152.105.2
Mar 24 10:27:31 GraPhi pppd[4797]: remote IP address 10.64.64.64
Mar 24 10:27:31 GraPhi pppd[4797]: primary   DNS address 212.152.70.7
Mar 24 10:27:31 GraPhi pppd[4797]: secondary DNS address 212.152.70.6
Mar 24 10:27:50 GraPhi atkbd.c: Unknown key pressed (translated set 2, code 0xb4 on isa0060/serio0).
Mar 24 10:27:50 GraPhi atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.
Mar 24 10:27:50 GraPhi atkbd.c: Unknown key released (translated set 2, code 0xb4 on isa0060/serio0).
Mar 24 10:27:50 GraPhi atkbd.c: Use 'setkeycodes e034 <keycode>' to make it known.

/var/log/errors.log:

[...]
Mar 24 10:27:31 GraPhi pppd[4797]: Cannot determine ethernet address for proxy ARP

[graphi]

Το πρόβλημα σχεδόν λύθηκε. Και βρίσκετε στο DNS. Τώρα γιατί πριν το update λειτουργούσε ενώ μετά όχι δεν μπορώ να καταλάβω.

Το θέμα τώρα είναι πως θα δηλώσω τους dns της wind μόνο για την ppp0 ή ακόμα καλύτερα μόνο για την συγκεκριμένη σύνδεση. Έβαλα τις γραμμές

config_ppp0=( "ppp" )
dns_servers_ppp0=( "208.67.222.222" "208.67.220.220")

όπως λέει στο gentoo-wiki αλλά δεν δούλεψαν (όπως επίσης και στο /etc/rc.conf). Πως θα το κάνω αυτό στο archlinux;

Υ.Γ.: Το μηχάνημα είναι laptop και συνδέομαι με διάφορους τρόπους στο net. Οπότε δεν θα ήθελα να πειράζω το resolve.conf κάθε φορά.

[ranger]

γιατί δεν παίζεις με network profiles;
http://wiki.archlinux.org/index.php/Network_Profiles