Πρέπει να βρω τρόπο ώστε το WiCD να με συνδέει σε VPN server... Δεν υπάρχει προφανής τρόπος για κάτι τέτοιο: το WiCD δεν προσφέρει σύνδεση με VPN! Ξέρει κανείς κάποιο τέχνασμα;
Εμφάνιση 4.921-4.935 από 6428
Θέμα: Περί Arch Linux... (v6)
-
09-12-17, 14:15 Απάντηση: Περί Arch Linux... (v6) #4921
-
09-12-17, 14:42 Απάντηση: Περί Arch Linux... (v6) #4922
Οχι, το wicd δεν προσφερει δυνατοτητες vpn.
---edit
Τωρα ειδα οτι δεν ρωτας για το wicd αλλα θες εναλλακτικο. Δεν ξερω καποιο, συγγνωμηΤελευταία επεξεργασία από το μέλος jim_p : 09-12-17 στις 14:48.
ديميتريس
-
09-12-17, 23:35 Απάντηση: Περί Arch Linux... (v6) #4923
ριξε μια ματια, εκανα απλα μια αναζητηση δεν εχω χρονο να το ψαξω....
https://airvpn.org/topic/7363-linux-...vpn-stability/
και για openvpn ομως https://www.reddit.com/r/linux4noobs.../wicd_and_vpn/
-
10-12-17, 13:08 Απάντηση: Περί Arch Linux... (v6) #4924
Πάντως τουλάχιστον ο NetworkManager δουλεύει μια χαρά για VPN
(Όχι τίποτε άλλο, αλλά από τη μια ο NetworkManager είναι βαρύς, από την άλλη χρειάζονται 2-3 προγράμματα και ψάξιμο για να κάνεις ό,τι κάνει αυτός μόνος του... Όπως πάντα, η αλήθεια είναι κάπου στη μέση...)
-
11-12-17, 07:41 Απάντηση: Περί Arch Linux... (v6) #4925
καλημερα, εγω παντως δουλευω πλεον μονο με Openvpn οποτε εχει δικο του client...
https://openvpn.net/index.php/open-s...downloads.html
https://wiki.archlinux.org/index.php/OpenVPN
αν και τα κανω σε Mikrotik routerboards και δεν χρειαζεται καν απο το PC, αλλα τα εχω για καβατζα αν χρειαστει.
-
22-12-17, 13:33 Απάντηση: Περί Arch Linux... (v6) #4926
Καλημέρα και χρόνια πολλά! Θα ήθελα την βοήθεια σας σε ένα θέμα που αντιμετωπίζω.
Έχω στήσει ένα οικιακό server με Arch (nfs ,samba & ftp) και έχω πρόβλημα με το samba!
Ακολούθησα το wiki για το samba αλλά προφανώς κάτι μου έχει ξεφύγει, δηλαδή ένω θεωρητικά το έχω κάνει να μην ζητάει κωδικό αυτό μου ζητάει , αλλά το μεγαλύτερο μου πρόβλημα είναι ότι δίνοντας username & password δεν συνδέετε και ανακάλυψα ότι πρέπει κάθε φορά να δινω την εντολή για password του χρήστη δηλ. sudo smbpasswd -a htpc (είναι ο χρήστης) και μετά sudo systemctl restart nmbd smbd για να δουλέψει.
Το /etc/samba/smb.conf είναι:
Κώδικας:# This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options (perhaps too # many!) most of which are not shown in this example # # For a step to step guide on installing, configuring and using samba, # read the Samba-HOWTO-Collection. This may be obtained from: # http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf # # Many working examples of smb.conf files can be found in the # Samba-Guide which is generated daily and can be downloaded from: # http://www.samba.org/samba/docs/Samba-Guide.pdf # # Any line which starts with a ; (semi-colon) or a # (hash) # is a comment and is ignored. In this example we will use a # # for commentry and a ; for parts of the config file that you # may wish to enable # # NOTE: Whenever you modify this file you should run the command "testparm" # to check that you have not made any basic syntactic errors. # #======================= Global Settings ===================================== [global] # workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH workgroup = WORKGROUP # server string is the equivalent of the NT Description field server string = Samba Server security = user map to guest = Bad User # Server role. Defines in which mode Samba will operate. Possible # values are "standalone server", "member server", "classic primary # domain controller", "classic backup domain controller", "active # directory domain controller". # # Most people will want "standalone server" or "member server". # Running as "active directory domain controller" will require first # running "samba-tool domain provision" to wipe databases and create a # new domain. server role = standalone server # This option is important for security. It allows you to restrict # connections to machines which are on your local network. The # following example restricts access to two C class networks and # the "loopback" interface. For more examples of the syntax see # the smb.conf man page ; hosts allow = 192.168.1. 192.168.2. 127. # Uncomment this if you want a guest account, you must add this to /etc/passwd # otherwise the user "nobody" is used ; guest account = nobody # this tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/%m.log # Put a capping on the size of the log files (in Kb). max log size = 50 # Specifies the Kerberos or Active Directory realm the host is part of ; realm = MY_REALM # Backend to store user information in. New installations should # use either tdbsam or ldapsam. smbpasswd is available for backwards # compatibility. tdbsam requires no further configuration. ; passdb backend = tdbsam # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting. # Note: Consider carefully the location in the configuration file of # this line. The included file is read at that point. ; include = /usr/local/samba/lib/smb.conf.%m # Configure Samba to use multiple interfaces # If you have multiple network interfaces then you must list them # here. See the man page for details. ; interfaces = 192.168.12.2/24 192.168.13.2/24 interfaces = lo enp5s0 bind interfaces only = true # Where to store roving profiles (only for Win95 and WinNT) # %L substitutes for this servers netbios name, %U is username # You must uncomment the [Profiles] share below ; logon path = \\%L\Profiles\%U # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server ; wins support = yes # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # WINS Proxy - Tells Samba to answer name resolution queries on # behalf of a non WINS capable client, for this to work there must be # at least one WINS Server on the network. The default is NO. ; wins proxy = yes # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names # via DNS nslookups. The default is NO. dns proxy = no # These scripts are used on a domain controller or stand-alone # machine to add or delete corresponding unix accounts ; add user script = /usr/sbin/useradd %u ; add group script = /usr/sbin/groupadd %g ; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u ; delete user script = /usr/sbin/userdel %u ; delete user from group script = /usr/sbin/deluser %u %g ; delete group script = /usr/sbin/groupdel %g usershare path = /var/lib/samba/usershare usershare max shares = 100 usershare allow guests = yes usershare owner only = yes #============================ Share Definitions ============================== [htpc] comment = htpc path = /home/htpc public = yes guest ok = yes browsable = yes writable = yes [homes] comment = Home Directories browseable = no writable = yes # Un-comment the following and create the netlogon directory for Domain Logons ; [netlogon] ; comment = Network Logon Service ; path = /usr/local/samba/lib/netlogon ; guest ok = yes ; writable = no ; share modes = no # Un-comment the following to provide a specific roving profile share # the default is to use the user's home directory ;[Profiles] ; path = /usr/local/samba/profiles ; browseable = no ; guest ok = yes # NOTE: If you have a BSD-style print system there is no need to # specifically define each individual printer [printers] comment = All Printers path = /usr/spool/samba browseable = no # Set public = yes to allow user 'guest account' to print guest ok = no writable = no printable = yes # This one is useful for people to share files ;[tmp] ; comment = Temporary file space ; path = /tmp ; read only = no ; public = yes # A publicly accessible directory, but read only, except for people in # the "staff" group ;[public] ; comment = Public Stuff ; path = /home/samba ; public = yes ; writable = no ; printable = no ; write list = @staff # Other examples. # # A private printer, usable only by fred. Spool data will be placed in fred's # home directory. Note that fred must have write access to the spool directory, # wherever it is. ;[fredsprn] ; comment = Fred's Printer ; valid users = fred ; path = /homes/fred ; printer = freds_printer ; public = no ; writable = no ; printable = yes # A private directory, usable only by fred. Note that fred requires write # access to the directory. ;[fredsdir] ; comment = Fred's Service ; path = /usr/somewhere/private ; valid users = fred ; public = no ; writable = yes ; printable = no # a service which has a different directory for each machine that connects # this allows you to tailor configurations to incoming machines. You could # also use the %U option to tailor it by user name. # The %m gets replaced with the machine name that is connecting. ;[pchome] ; comment = PC Directories ; path = /usr/pc/%m ; public = no ; writable = yes # A publicly accessible directory, read/write to all users. Note that all files # created in the directory by users will be owned by the default user, so # any user with access can delete any other user's files. Obviously this # directory must be writable by the default user. Another user could of course # be specified, in which case all files would be owned by that user instead. ;[public] ; path = /usr/somewhere/else/public ; public = yes ; only guest = yes ; writable = yes ; printable = no # The following two entries demonstrate how to share a directory so that two # users can place files there that will be owned by the specific users. In this # setup, the directory should be writable by both users and should have the # sticky bit set on it to prevent abuse. Obviously this could be extended to # as many users as required. ;[myshare] ; comment = Mary's and Fred's stuff ; path = /usr/somewhere/shared ; valid users = mary fred ; public = no ; writable = yes ; printable = no ; create mask = 0765
-
27-12-17, 11:26 Απάντηση: Περί Arch Linux... (v6) #4927
καλημέρα και χρονια πολλα! δεδομενου αυτου https://www.archlinux.org/news/the-end-of-i686-support/
πρεπει να αλλαξουμε κατι στα ρεπος μας εμεις με τα 64bit γιατι εχω και μερικα για 32.
-
28-12-17, 02:27 Απάντηση: Περί Arch Linux... (v6) #4928
-
28-12-17, 18:18 Απάντηση: Περί Arch Linux... (v6) #4929
καλησπέρα, ναι εννοουσα οτι εχω repos για βιβλιοθηκες των 32bit. Αυτο με τα μηχανηματα το ξερω, το εκανα την Τριτη σε εναν λάπτοπ με manjaro ομως. https://www.adslgr.com/forum/threads...versions-ended
σημερα μου κολαει πολυ ασχημα ο firefox γνωριζει κανεις τι ειναι αυτα τα παρακατω που δειχνει στην κονσολα?
Κώδικας:(/usr/lib/firefox/firefox:9524): Gtk-WARNING **: Error setting gtk-xft-antialias in /home/nikiforos/.config/gtk-3.0/settings.ini: Key file contains key ?gtk-xft-antialias? in group ?Settings? which has a value that cannot be interpreted. (/usr/lib/firefox/firefox:9524): Gtk-WARNING **: Error setting gtk-xft-hinting in /home/nikiforos/.config/gtk-3.0/settings.ini: Key file contains key ?gtk-xft-hinting? in group ?Settings? which has a value that cannot be interpreted. [GFX1-]: Failed to allocate a surface due to invalid size (CDT) Size(44,36493) ExceptionHandler::GenerateDump cloned child 9578 ExceptionHandler::SendContinueSignalToChild sent continue signal to child ExceptionHandler::WaitForContinueSignal waiting for continue signal... ExceptionHandler::GenerateDump cloned child 9580 ExceptionHandler::SendContinueSignalToChild sent continue signal to child ExceptionHandler::WaitForContinueSignal waiting for continue signal... [Parent 9246, Gecko_IOThread] WARNING: waitpid failed pid:9396 errno:10: file /build/firefox/src/mozilla-unified/ipc/chromium/src/base/process_util_posix.cc, line 276 [Parent 9246, Gecko_IOThread] WARNING: pipe error (41): Connection reset by peer: file /build/firefox/src/mozilla-unified/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 353 [Parent 9246, Gecko_IOThread] WARNING: waitpid failed pid:9524 errno:10: file /build/firefox/src/mozilla-unified/ipc/chromium/src/base/process_util_posix.cc, line 276
Τελευταία επεξεργασία από το μέλος Nikiforos : 28-12-17 στις 19:14.
-
29-12-17, 19:56 Απάντηση: Περί Arch Linux... (v6) #4930
καλησπέρα, σημερα μου εβγαλε αναβαθμιση ο firefox με pacman -Syu αλλα ενω ανοιγουν τωρα οι σελιδες χωρις να μενει τελειως κολλημενος, παει πολυ αργα δεν ξερω τι γινεται με την παρτυ του...
Κώδικας:Looking for conflicting packages... Packages (4) firefox-57.0.3-1 firefox-i18n-el-57.0.3-1 numactl-2.0.11-2 perl-dbi-1.639-1 Total Download Size: 42,25 MiB Total Installed Size: 158,20 MiB Net Upgrade Size: 0,15 MiB :: Proceed with installation? [Y/n] y
ειμαι αναγκασμενος τωρα να ανοιγω virtualbox να τρεχω win 7 ή 10 για να μπορω να ανοιγω σελιδες με επεκταση .awmn δλδ του www.awmn.net
ακυρο τελικα για τον chrome αρκει διπλα στο site ενα /
παλι καλα μελος του awmn μου το ειπε....Τελευταία επεξεργασία από το μέλος Nikiforos : 29-12-17 στις 23:19.
-
04-01-18, 22:46 Απάντηση: Περί Arch Linux... (v6) #4931
Είχα συνδεδεμένο το smartphone στη θύρα USB και έτρεχαν Chrome, Steam και Windows 7 σε Virtualbox. Ξαφνικα το Arch κολλάει και παρέμεινε έτσι για ώρες μήπως και συνέλθει. Αναγκάστηκα να κλείσω τον υπολογιστή από τον κεντρικό διακόπτη. Τώρα, όταν ανοίγω τον υπολογιστή εμφανίζεται το στιγμιότυπο που επισυνάπτω...
-
05-01-18, 00:48 Απάντηση: Περί Arch Linux... (v6) #4932
Μαλλον σου εγινε corrupted το filesystem του /. Την ειχα πατησει και εγω ετσι πριν 1.5 χρονο
https://www.adslgr.com/forum/threads...ted-filesystemديميتريس
-
05-01-18, 02:01 Απάντηση: Περί Arch Linux... (v6) #4933
Διάβασα το θρεντ... Μόνο η χρήση κάποιου live_cd_dvd βλέπω να βοθάει: στην γραμμή εντολής που φαίνεται στο στιγμιότυπο δεν μπορώ να γράψω τίποτα, το πληκτρολόγιο δεν δουλεύει!!! Αλλά ο δρομέας αναβοσβύνει κανονικά!!! Πολύ τρελή κατάσταση!
-
05-01-18, 07:53 Απάντηση: Περί Arch Linux... (v6) #4934
καλημέρα, και εγω το εχω παθει αυτό, αν θυμαμαι καλα ειχα βαλει καποιο live cd/dvd ισως Ubuntu, ή μπορει και το ιδιο το arch και τρεχεις fsck -y /dev/sdX οπου Χ το νουμερο που εχει ο σκληρος.
Εμενα ετσι έφτιαχνε.
Τωρα αν εχει γινει μεγαλη ζημια μπορει να πρεπει να ξανακανεις εγκατασταση.
Εγω παιρνω backup σε εξωτερικο usb3 σκληρο ολο το / και ξεχωριστα το /home και εχω αλλα partitions χωρια.
Ετσι ότι και να γινει μπορω να το επαναφερω μπαμ μπαμ και γρηγορα. https://wiki.archlinux.org/index.php/rsync
ετσι https://wiki.archlinux.org/index.php..._system_backup
Ελπιζω να ειχες παρει κανα backup ετσι?
Δοκιμασε αυτό με το fsck από ένα live cd/dvd και βλέπεις.
-
05-01-18, 10:00 Απάντηση: Περί Arch Linux... (v6) #4935
Εμενα δουλευε κανονικα το πληκτρολογιο. Μηπως το δικο σου ειναι usb? Το δικο μου ειναι ps2 :P
ديميتريس
Παρόμοια Θέματα
-
Περί Arch Linux... (v5)
Από flamelab στο φόρουμ Unix - LinuxΜηνύματα: 2023Τελευταίο Μήνυμα: 23-07-12, 00:41 -
Περί Arch Linux... (v4)
Από flamelab στο φόρουμ Unix - LinuxΜηνύματα: 5800Τελευταίο Μήνυμα: 29-08-11, 16:14 -
Περί Arch Linux... (v3)
Από flamelab στο φόρουμ Unix - LinuxΜηνύματα: 2542Τελευταίο Μήνυμα: 19-05-10, 13:43 -
Περί Arch Linux... (v2)
Από giorgosc61 στο φόρουμ Unix - LinuxΜηνύματα: 10797Τελευταίο Μήνυμα: 18-10-09, 21:48 -
Περί Arch Linux...
Από giorgosc61 στο φόρουμ Unix - LinuxΜηνύματα: 5046Τελευταίο Μήνυμα: 06-06-08, 00:46
Bookmarks