To thread του Debian - vol. 3

[Slammer]

A! σταματάει στο αρχικό στάδιο? πριν δηλώσεις partitions? προφανώς κάτι ιδιαίτερο συμβαίνει στο PC σου... ίσως το chipset... δεν ξέρω... μου έχει τύχει μερικές φορές με testing installer αλλά ποτέ με stable.

@Simpleton καπως καλύτερα με το DRI 3... θα δούμε...

[trd64]

το εχω κατεβασει απειρες φορες και το εχω γραψει αλλες τοσες!!!

Χρειάζεται μια και σωστή. Τσέκαρε το sha1.

[danths]

ρε παιδιά αφου λεω αυτο το πρόβλημα το εχω και σε αλλες διανομές!!! δεν ειναι το iso το πρόβλημα, με τπ ιδιο iso εκανα και σε ενα laptop εγκατάσταση

[jim_p]

Αυτο με το nomodeset που ειπα το κοιταξες?

[danths]

δεν το βρήκα πουθενά στο installer του bebian

[patch]

δεν το βρήκα πουθενά στο installer του bebian

Όταν μπουταρει έχει επιλογή νομίζω να βάλεις kernel parameter

[danths]

οι εικονες ειναι απο το laptop με intel, εγω εχω το προβλημα στην radeon

[patch]

Α δεν φτάνεις καν εκεί δλδ....
Γιατί στην δεύτερη εικόνα είναι αυτό που σου λέει ο jim_p. Ίσως το chipset τότε γιατί αν φτάνεις εκεί με vesa νομίζω θα κάνει μπουτ

[danths]

λοιπόν εβαλα το iso στο σταθερο με την radeon

μου κολλαει ακριβως εδω


μετα πατησα alt+ctrl+4 και μου εβγαλε αυτη την εικονα

[dimitri_ns]

λοιπόν εβαλα το iso στο σταθερο με την radeon

μου κολλαει ακριβως εδω


μετα πατησα alt+ctrl+4 και μου εβγαλε αυτη την εικονα

Στο fstab βάζει μία γραμμή για usb
Βάλε # μπροστά και θα μπουτάρει

Τώρα πως θα το κάνεις αυτό σε installation δεν ξέρω. Δουλεύει σε εγκατεστημμένα συστήματα.
Αν έχεις usb επάνω, ξήλωσέ το

[danths]

και στο debian που εχω βαλει με το live-cd μου αργει καμια φορα να κλεισει πανω απο 5 λεπτα μπορει και παραπανω

μου βγαζει ενα μηνυμα

watchdog watchdog0: watchdog did not stop!

lsusb

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0aec:3260 Neodio Technologies Corp. 7-in-1 Card Reader
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

dmesg

[    0.000000] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28
[    0.000000] Linux version 4.8.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.1 20161019 (Debian 5.4.1-3) ) #1 SMP Debian 4.8.11-1 (2016-12-02)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-2-amd64 root=UUID=c7239992-40cb-4d97-ad76-530e85a3cb3a ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfedffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfee0000-0x00000000bfee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfee3000-0x00000000bfeeffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bfef0000-0x00000000bfefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. G31M-ES2C/G31M-S2C, BIOS F6 02/05/2009
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CEFFF write-protect
[    0.000000]   CF000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   2 base 100000000 mask FC0000000 write-back
[    0.000000]   3 base 0BFF00000 mask FFFF00000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbfee0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f5200-0x000f520f] mapped at [ffff8b03000f5200]
[    0.000000] Base memory trampoline at [ffff8b0300099000] 99000 size 24576
[    0.000000] BRK [0x10ed4c000, 0x10ed4cfff] PGTABLE
[    0.000000] BRK [0x10ed4d000, 0x10ed4dfff] PGTABLE
[    0.000000] BRK [0x10ed4e000, 0x10ed4efff] PGTABLE
[    0.000000] BRK [0x10ed4f000, 0x10ed4ffff] PGTABLE
[    0.000000] BRK [0x10ed50000, 0x10ed50fff] PGTABLE
[    0.000000] BRK [0x10ed51000, 0x10ed51fff] PGTABLE
[    0.000000] BRK [0x10ed52000, 0x10ed52fff] PGTABLE
[    0.000000] BRK [0x10ed53000, 0x10ed53fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x34311000-0x3617ffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6BF0 000014 (v00 GBT   )
[    0.000000] ACPI: RSDT 0x00000000BFEE3040 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 0x00000000BFEE30C0 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 0x00000000BFEE3180 0040E8 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 0x00000000BFEE0000 000040
[    0.000000] ACPI: HPET 0x00000000BFEE73C0 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 0x00000000BFEE7440 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: APIC 0x00000000BFEE72C0 000084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT 0x00000000BFEE7AE0 0003AB (v01 PmRef  CpuPm    00003000 INTL 20040311)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13fffb000-0x13fffffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bfedffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 1048190
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12220 pages used for memmap
[    0.000000]   DMA32 zone: 782048 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfee0000-0xbfee2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfee3000-0xbfeeffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfef0000-0xbfefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff00000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.000000] e820: [mem 0xd0000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff8b043fc00000 s103384 r8192 d31784 u524288
[    0.000000] pcpu-alloc: s103384 r8192 d31784 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031789
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-2-amd64 root=UUID=c7239992-40cb-4d97-ad76-530e85a3cb3a ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4015436K/4192760K available (6097K kernel code, 1165K rwdata, 2828K rodata, 1372K init, 800K bss, 177324K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2933.418 MHz processor
[    0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 5866.83 BogoMIPS (lpj=11733672)
[    0.004013] pid_max: default: 32768 minimum: 301
[    0.004032] ACPI: Core revision 20160422
[    0.009385] ACPI: 2 ACPI AML tables successfully acquired and loaded

[    0.009443] Security Framework initialized
[    0.009445] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.009453] AppArmor: AppArmor disabled by boot time parameter
[    0.009674] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.011393] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.012357] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.012362] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.012742] CPU: Physical Processor ID: 0
[    0.012743] CPU: Processor Core ID: 0
[    0.012745] mce: CPU supports 6 MCE banks
[    0.012752] CPU0: Thermal monitoring enabled (TM2)
[    0.012756] process: using mwait in idle threads
[    0.012761] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.012762] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.013095] Freeing SMP alternatives memory: 24K (ffffffff9567c000 - ffffffff95682000)
[    0.016013] ftrace: allocating 24998 entries in 98 pages
[    0.024102] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.024103] smpboot: Max logical packages: 2
[    0.024467] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     E7500  @ 2.93GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.068000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.068000] ... version:                2
[    0.068000] ... bit width:              40
[    0.068000] ... generic registers:      2
[    0.068000] ... value mask:             000000ffffffffff
[    0.068000] ... max period:             000000007fffffff
[    0.068000] ... fixed-purpose events:   3
[    0.068000] ... event mask:             0000000700000003
[    0.068000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.068000] x86: Booting SMP configuration:
[    0.068000] .... node  #0, CPUs:      #1
[    0.150023] x86: Booted up 1 node, 2 CPUs
[    0.150023] smpboot: Total of 2 processors activated (11733.38 BogoMIPS)
[    0.150023] devtmpfs: initialized
[    0.150023] x86/mm: Memory block size: 128MB
[    0.152642] PM: Registering ACPI NVS region [mem 0xbfee0000-0xbfee2fff] (12288 bytes)
[    0.152694] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.152727] pinctrl core: initialized pinctrl subsystem
[    0.152847] NET: Registered protocol family 16
[    0.164005] cpuidle: using governor ladder
[    0.176008] cpuidle: using governor menu
[    0.176068] ACPI: bus type PCI registered
[    0.176071] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.176202] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[    0.176204] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[    0.176212] pmd_set_huge: Cannot satisfy [mem 0xc0000000-0xc0200000] with a huge-page mapping due to MTRR override.
[    0.176526] PCI: Using configuration type 1 for base access
[    0.188059] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.188059] ACPI: Added _OSI(Module Device)
[    0.188059] ACPI: Added _OSI(Processor Device)
[    0.188059] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.188059] ACPI: Added _OSI(Processor Aggregator Device)
[    0.191075] ACPI: Dynamic OEM Table Load:
[    0.191081] ACPI: SSDT 0xFFFF8B043A60C400 00026C (v01 PmRef  Cpu0Ist  00003000 INTL 20040311)
[    0.191311] ACPI: Dynamic OEM Table Load:
[    0.191314] ACPI: SSDT 0xFFFF8B043A5B3600 000152 (v01 PmRef  Cpu1Ist  00003000 INTL 20040311)
[    0.192029] ACPI: Interpreter enabled
[    0.192046] ACPI: (supports S0 S1 S4 S5)
[    0.192047] ACPI: Using IOAPIC for interrupt routing
[    0.192073] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.195816] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.195821] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.195824] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.196030] PCI host bridge to bus 0000:00
[    0.196032] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.196033] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.196035] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.196036] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.196037] pci_bus 0000:00: root bus resource [mem 0xbff00000-0xfebfffff window]
[    0.196039] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.196046] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.196138] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[    0.196169] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.196260] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.196274] pci 0000:00:1b.0: reg 0x10: [mem 0xe3100000-0xe3103fff 64bit]
[    0.196332] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.196373] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.196416] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.196473] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.196515] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.196557] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.196614] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.196655] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.196699] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.196730] pci 0000:00:1d.0: reg 0x20: [io  0xe000-0xe01f]
[    0.196784] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.196824] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.196856] pci 0000:00:1d.1: reg 0x20: [io  0xe100-0xe11f]
[    0.196909] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.196948] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.196980] pci 0000:00:1d.2: reg 0x20: [io  0xe200-0xe21f]
[    0.197034] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.197072] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.197104] pci 0000:00:1d.3: reg 0x20: [io  0xe300-0xe31f]
[    0.197158] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.197202] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.197215] pci 0000:00:1d.7: reg 0x10: [mem 0xe3104000-0xe31043ff]
[    0.197309] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.197349] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.197421] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.197465] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[    0.197533] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[    0.197536] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.197539] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[    0.197541] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.197630] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x010180
[    0.197640] pci 0000:00:1f.2: reg 0x10: [io  0x0000-0x0007]
[    0.197646] pci 0000:00:1f.2: reg 0x14: [io  0x0000-0x0003]
[    0.197652] pci 0000:00:1f.2: reg 0x18: [io  0x0000-0x0007]
[    0.197658] pci 0000:00:1f.2: reg 0x1c: [io  0x0000-0x0003]
[    0.197664] pci 0000:00:1f.2: reg 0x20: [io  0xf000-0xf00f]
[    0.197677] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.197678] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.197679] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.197680] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.197697] pci 0000:00:1f.2: PME# supported from D3hot
[    0.197771] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.197814] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
[    0.197936] pci 0000:01:00.0: [1002:68b8] type 00 class 0x030000
[    0.197948] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.197956] pci 0000:01:00.0: reg 0x18: [mem 0xe1000000-0xe101ffff 64bit]
[    0.197961] pci 0000:01:00.0: reg 0x20: [io  0xc000-0xc0ff]
[    0.197971] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.197999] pci 0000:01:00.0: supports D1 D2
[    0.198045] pci 0000:01:00.1: [1002:aa58] type 00 class 0x040300
[    0.198056] pci 0000:01:00.1: reg 0x10: [mem 0xe1020000-0xe1023fff 64bit]
[    0.198105] pci 0000:01:00.1: supports D1 D2
[    0.198160] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.198162] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.198164] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe1ffffff]
[    0.198166] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.198206] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.198209] pci 0000:00:1c.0:   bridge window [io  0xb000-0xbfff]
[    0.198266] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.198283] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.198307] pci 0000:03:00.0: reg 0x18: [mem 0xe3010000-0xe3010fff 64bit pref]
[    0.198322] pci 0000:03:00.0: reg 0x20: [mem 0xe3000000-0xe300ffff 64bit pref]
[    0.198332] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.198401] pci 0000:03:00.0: supports D1 D2
[    0.198402] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.212019] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.212023] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.212027] pci 0000:00:1c.1:   bridge window [mem 0xe2000000-0xe2ffffff]
[    0.212033] pci 0000:00:1c.1:   bridge window [mem 0xe3000000-0xe30fffff 64bit pref]
[    0.212123] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.212127] pci 0000:00:1e.0:   bridge window [io  0xa000-0xafff]
[    0.212135] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.212137] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.212140] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.212142] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.212144] pci 0000:00:1e.0:   bridge window [mem 0xbff00000-0xfebfffff window] (subtractive decode)
[    0.212684] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.212735] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.212784] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.212834] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.212883] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.212933] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.212982] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.213032] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.213126] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.213206] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.213206] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.213206] vgaarb: loaded
[    0.213206] vgaarb: bridge control possible 0000:01:00.0
[    0.213206] PCI: Using ACPI for IRQ routing
[    0.218172] PCI: pci_cache_line_size set to 64 bytes
[    0.218205] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.218206] e820: reserve RAM buffer [mem 0xbfee0000-0xbfffffff]
[    0.220048] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.220051] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.220054] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.222072] clocksource: Switched to clocksource hpet
[    0.227762] VFS: Disk quotas dquot_6.6.0
[    0.227798] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.227910] pnp: PnP ACPI init
[    0.228118] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.228119] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.228120] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.228122] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.228123] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.228127] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.228202] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.228446] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.228627] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.228754] system 00:04: [io  0x0400-0x04cf] could not be reserved
[    0.228757] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.228938] system 00:05: [mem 0xc0000000-0xcfffffff] has been reserved
[    0.228940] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.229098] system 00:06: [mem 0x000cf800-0x000cffff] has been reserved
[    0.229099] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.229101] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.229102] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.229104] system 00:06: [mem 0xbfee0000-0xbfefffff] could not be reserved
[    0.229105] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.229107] system 00:06: [mem 0x00100000-0xbfedffff] could not be reserved
[    0.229108] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.229110] system 00:06: [mem 0xfed13000-0xfed1dfff] has been reserved
[    0.229111] system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.229113] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.229114] system 00:06: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.229116] system 00:06: [mem 0xfff00000-0xffffffff] has been reserved
[    0.229117] system 00:06: [mem 0x000e0000-0x000effff] has been reserved
[    0.229119] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.229124] pnp: PnP ACPI: found 7 devices
[    0.235599] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.235617] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.235618] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.235632] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.235634] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.235635] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.235637] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.235642] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe3200000-0xe33fffff]
[    0.235645] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe3400000-0xe35fffff 64bit pref]
[    0.235648] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0000000-0xe001ffff pref]
[    0.235650] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.235651] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.235654] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe1ffffff]
[    0.235656] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.235658] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.235660] pci 0000:00:1c.0:   bridge window [io  0xb000-0xbfff]
[    0.235663] pci 0000:00:1c.0:   bridge window [mem 0xe3200000-0xe33fffff]
[    0.235666] pci 0000:00:1c.0:   bridge window [mem 0xe3400000-0xe35fffff 64bit pref]
[    0.235670] pci 0000:03:00.0: BAR 6: assigned [mem 0xe2000000-0xe201ffff pref]
[    0.235672] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.235674] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.235677] pci 0000:00:1c.1:   bridge window [mem 0xe2000000-0xe2ffffff]
[    0.235679] pci 0000:00:1c.1:   bridge window [mem 0xe3000000-0xe30fffff 64bit pref]
[    0.235684] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.235685] pci 0000:00:1e.0:   bridge window [io  0xa000-0xafff]
[    0.235694] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.235695] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.235696] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.235698] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.235699] pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff window]
[    0.235700] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.235701] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe1ffffff]
[    0.235703] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.235704] pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
[    0.235705] pci_bus 0000:02: resource 1 [mem 0xe3200000-0xe33fffff]
[    0.235706] pci_bus 0000:02: resource 2 [mem 0xe3400000-0xe35fffff 64bit pref]
[    0.235707] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.235708] pci_bus 0000:03: resource 1 [mem 0xe2000000-0xe2ffffff]
[    0.235709] pci_bus 0000:03: resource 2 [mem 0xe3000000-0xe30fffff 64bit pref]
[    0.235711] pci_bus 0000:04: resource 0 [io  0xa000-0xafff]
[    0.235712] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.235713] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.235714] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.235715] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.235717] pci_bus 0000:04: resource 8 [mem 0xbff00000-0xfebfffff window]
[    0.235759] NET: Registered protocol family 2
[    0.235940] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.236068] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.236271] TCP: Hash tables configured (established 32768 bind 32768)
[    0.236313] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.236341] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.236413] NET: Registered protocol family 1
[    0.236974] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.236979] PCI: CLS 32 bytes, default 64
[    0.237027] Unpacking initramfs...
[    0.723710] Freeing initrd memory: 31164K (ffff8b0334311000 - ffff8b0336180000)
[    0.723717] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.723719] software IO TLB [mem 0xbbee0000-0xbfee0000] (64MB) mapped at [ffff8b03bbee0000-ffff8b03bfedffff]
[    0.724257] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.724305] audit: initializing netlink subsys (disabled)
[    0.724332] audit: type=2000 audit(1483632919.724:1): initialized
[    0.724667] Initialise system trusted keyrings
[    0.724760] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    0.724773] zbud: loaded
[    0.770969] Key type asymmetric registered
[    0.770970] Asymmetric key parser 'x509' registered
[    0.770990] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.771014] io scheduler noop registered
[    0.771015] io scheduler deadline registered
[    0.771021] io scheduler cfq registered (default)
[    0.771479] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.771485] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.771499] intel_idle: does not run on family 6 model 23
[    0.771623] GHES: HEST is not enabled!
[    0.771676] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.792058] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.792404] Linux agpgart interface v0.103
[    0.792493] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.792493] AMD IOMMUv2 functionality not available on this system
[    0.792658] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.793026] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.793033] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.793249] mousedev: PS/2 mouse device common for all mice
[    0.793309] rtc_cmos 00:01: RTC can wake from S4
[    0.793415] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.793435] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.793455] ledtrig-cpu: registered to indicate activity on CPUs
[    0.793749] NET: Registered protocol family 10
[    0.793954] mip6: Mobile IPv6
[    0.793955] NET: Registered protocol family 17
[    0.793957] mpls_gso: MPLS GSO support
[    0.794093] microcode: sig=0x1067a, pf=0x1, revision=0xa0b
[    0.794126] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.794243] registered taskstats version 1
[    0.794245] Loading compiled-in X.509 certificates
[    0.795591] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    0.795867] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    0.795882] zswap: loaded using pool lzo/zbud
[    0.796185] rtc_cmos 00:01: setting system clock to 2017-01-05 16:15:20 UTC (1483632920)
[    0.796229] PM: Hibernation image not present or could not be loaded.
[    0.797455] Freeing unused kernel memory: 1372K (ffffffff95525000 - ffffffff9567c000)
[    0.797456] Write protecting the kernel read-only data: 10240k
[    0.797589] Freeing unused kernel memory: 32K (ffff8b040e5f8000 - ffff8b040e600000)
[    0.800522] Freeing unused kernel memory: 1268K (ffff8b040e8c3000 - ffff8b040ea00000)
[    0.807598] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.818424] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.818487] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.818496] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.819246] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.819279] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.820190] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.820247] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.820564] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.820621] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.820673] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.843334] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.843347] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.843752] r8169 0000:03:00.0 eth0: RTL8102e at 0xffffbb480072c000, 00:24:1d:90:ad:c4, XID 14a00000 IRQ 27
[    0.853035] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    0.853042] ACPI: Power Button [PWRB]
[    0.853316] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.853318] ACPI: Power Button [PWRF]
[    0.854993] ACPI: bus type USB registered
[    0.855018] usbcore: registered new interface driver usbfs
[    0.855028] usbcore: registered new interface driver hub
[    0.862177] [drm] Initialized drm 1.1.0 20060810
[    0.862235] usbcore: registered new device driver usb
[    0.862416] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    0.863868] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.864914] uhci_hcd: USB Universal Host Controller Interface driver
[    0.865050] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.865056] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.865064] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.865092] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000
[    0.869985] ehci-pci: EHCI PCI platform driver
[    0.870860] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    0.870861] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.870863] usb usb1: Product: UHCI Host Controller
[    0.870864] usb usb1: Manufacturer: Linux 4.8.0-2-amd64 uhci_hcd
[    0.870865] usb usb1: SerialNumber: 0000:00:1d.0
[    0.871006] hub 1-0:1.0: USB hub found
[    0.871012] hub 1-0:1.0: 2 ports detected
[    0.871296] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.871301] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.875205] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.875220] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe3104000
[    0.885458] SCSI subsystem initialized
[    0.895869] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.895948] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.895950] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.895951] usb usb2: Product: EHCI Host Controller
[    0.895952] usb usb2: Manufacturer: Linux 4.8.0-2-amd64 ehci_hcd
[    0.895953] usb usb2: SerialNumber: 0000:00:1d.7
[    0.896094] hub 2-0:1.0: USB hub found
[    0.896100] hub 2-0:1.0: 8 ports detected
[    0.901733] [drm] radeon kernel modesetting enabled.
[    0.905544] CRAT table not found
[    0.905546] Finished initializing topology ret=0
[    0.905552] kfd kfd: Initialized module
[    0.905991] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8 0x174B:0xE144 0x00).
[    0.906002] [drm] register mmio base: 0xE1000000
[    0.906003] [drm] register mmio size: 131072
[    0.906094] ATOM BIOS: JUNIPER
[    0.906147] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    0.906149] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[    0.906150] [drm] Detected VRAM RAM=1024M, BAR=256M
[    0.906151] [drm] RAM width 128bits DDR
[    0.906190] libata version 3.00 loaded.
[    0.911801] [TTM] Zone  kernel: Available graphics memory: 2024648 kiB
[    0.911802] [TTM] Initializing pool allocator
[    0.911807] [TTM] Initializing DMA pool allocator
[    0.911829] [drm] radeon: 1024M of VRAM memory ready
[    0.911830] [drm] radeon: 1024M of GTT memory ready.
[    0.911844] [drm] Loading JUNIPER Microcode
[    0.911865] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/JUNIPER_pfp.bin
[    0.911879] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/JUNIPER_me.bin
[    0.911890] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/JUNIPER_rlc.bin
[    0.911911] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/JUNIPER_smc.bin
[    0.911915] [drm] Internal thermal controller with fan control
[    0.924131] hub 1-0:1.0: USB hub found
[    0.924138] hub 1-0:1.0: 2 ports detected
[    0.925160] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.925167] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.925173] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.925204] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100
[    0.925264] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.925266] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.925267] usb usb3: Product: UHCI Host Controller
[    0.925268] usb usb3: Manufacturer: Linux 4.8.0-2-amd64 uhci_hcd
[    0.925270] usb usb3: SerialNumber: 0000:00:1d.1
[    0.925385] hub 3-0:1.0: USB hub found
[    0.925391] hub 3-0:1.0: 2 ports detected
[    0.925548] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.925552] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.925558] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.925585] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200
[    0.925633] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.925634] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.925635] usb usb4: Product: UHCI Host Controller
[    0.925636] usb usb4: Manufacturer: Linux 4.8.0-2-amd64 uhci_hcd
[    0.925638] usb usb4: SerialNumber: 0000:00:1d.2
[    0.925737] hub 4-0:1.0: USB hub found
[    0.925743] hub 4-0:1.0: 2 ports detected
[    0.925887] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.925891] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.925896] uhci_hcd 0000:00:1d.3: detected 2 ports
[    0.925918] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300
[    0.925961] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.925963] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.925964] usb usb5: Product: UHCI Host Controller
[    0.925965] usb usb5: Manufacturer: Linux 4.8.0-2-amd64 uhci_hcd
[    0.925966] usb usb5: SerialNumber: 0000:00:1d.3
[    0.926064] hub 5-0:1.0: USB hub found
[    0.926070] hub 5-0:1.0: 2 ports detected
[    0.926389] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.930532] ata_piix 0000:00:1f.2: version 2.13
[    0.930595] ata_piix 0000:00:1f.2: MAP [ IDE IDE P1 P3 ]
[    0.931567] scsi host0: ata_piix
[    0.931743] scsi host1: ata_piix
[    0.931793] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.931794] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.943802] [drm] radeon: dpm initialized
[    0.943885] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CYPRESS_uvd.bin
[    0.943912] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    0.961176] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[    0.961279] radeon 0000:01:00.0: WB enabled
[    0.961281] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8b04337ddc00
[    0.961283] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8b04337ddc0c
[    0.961684] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffbb480081c418
[    0.961686] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.961686] [drm] Driver supports precise vblank timestamp query.
[    0.961688] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    0.961730] radeon 0000:01:00.0: radeon: using MSI.
[    0.961755] [drm] radeon: irq initialized.
[    0.978286] [drm] ring test on 0 succeeded in 1 usecs
[    0.978290] [drm] ring test on 3 succeeded in 2 usecs
[    1.094796] ata1.00: ATAPI: Optiarc DVD RW AD-7200A, 1.09, max UDMA/66
[    1.094972] ata2.00: HPA detected: current 976771055, native 976773168
[    1.094975] ata2.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133
[    1.094976] ata2.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.099465] ata1.00: configured for UDMA/66
[    1.099981] ata2.00: configured for UDMA/133
[    1.101768] scsi 0:0:0:0: CD-ROM            Optiarc  DVD RW AD-7200A  1.09 PQ: 0 ANSI: 5
[    1.113212] scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5
[    1.173815] [drm] ring test on 5 succeeded in 1 usecs
[    1.173819] [drm] UVD initialized successfully.
[    1.174232] [drm] ib test on ring 0 succeeded in 0 usecs
[    1.174252] [drm] ib test on ring 3 succeeded in 0 usecs
[    1.393697] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.393699] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.393890] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.394287] sd 1:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/466 GiB)
[    1.394339] sd 1:0:0:0: [sda] Write Protect is off
[    1.394341] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.394357] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.396026] usb 2-2: new high-speed USB device number 2 using ehci-pci
[    1.424094]  sda: sda1 sda2 sda3
[    1.424394] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.564269] usb 2-2: New USB device found, idVendor=0951, idProduct=1666
[    1.564273] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.564275] usb 2-2: Product: DataTraveler 3.0
[    1.564277] usb 2-2: Manufacturer: Kingston
[    1.564279] usb 2-2: SerialNumber: 60A44C4253CABEA0DB46AD08
[    1.567229] usb-storage 2-2:1.0: USB Mass Storage device detected
[    1.567313] scsi host2: usb-storage 2-2:1.0
[    1.567390] usbcore: registered new interface driver usb-storage
[    1.568220] usbcore: registered new interface driver uas
[    1.728022] tsc: Refined TSC clocksource calibration: 2933.297 MHz
[    1.728028] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2a4821a18a9, max_idle_ns: 440795258294 ns
[    1.856043] [drm] ib test on ring 5 succeeded
[    1.856545] [drm] Radeon Display Connectors
[    1.856546] [drm] Connector 0:
[    1.856547] [drm]   DP-1
[    1.856547] [drm]   HPD4
[    1.856548] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    1.856549] [drm]   Encoders:
[    1.856549] [drm]     DFP1: INTERNAL_UNIPHY2
[    1.856550] [drm] Connector 1:
[    1.856550] [drm]   HDMI-A-1
[    1.856551] [drm]   HPD5
[    1.856552] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    1.856552] [drm]   Encoders:
[    1.856553] [drm]     DFP2: INTERNAL_UNIPHY2
[    1.856553] [drm] Connector 2:
[    1.856554] [drm]   DVI-I-1
[    1.856554] [drm]   HPD6
[    1.856555] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[    1.856556] [drm]   Encoders:
[    1.856556] [drm]     DFP3: INTERNAL_UNIPHY
[    1.856557] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    1.880020] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[    2.069034] usb 5-1: New USB device found, idVendor=046d, idProduct=c517
[    2.069036] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.069037] usb 5-1: Product: USB Receiver
[    2.069038] usb 5-1: Manufacturer: Logitech
[    2.075243] hidraw: raw HID events driver (C) Jiri Kosina
[    2.090034] random: fast init done
[    2.095704] [drm] fb mappable at 0xD034D000
[    2.095705] [drm] vram apper at 0xD0000000
[    2.095706] [drm] size 8294400
[    2.095706] [drm] fb depth is 24
[    2.095707] [drm]    pitch is 7680
[    2.095769] fbcon: radeondrmfb (fb0) is primary device
[    2.113315] Console: switching to colour frame buffer device 240x67
[    2.117284] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    2.119123] usbcore: registered new interface driver usbhid
[    2.119124] usbhid: USB HID core driver
[    2.121039] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:046D:C517.0001/input/input5
[    2.132067] [drm] Initialized radeon 2.46.0 20080528 for 0000:01:00.0 on minor 0
[    2.180245] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.3-1/input0
[    2.180258] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[    2.181028] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/0003:046D:C517.0002/input/input6
[    2.240427] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-1/input1
[    2.308015] usb 2-3: new high-speed USB device number 6 using ehci-pci
[    2.710792] scsi 2:0:0:0: Direct-Access     Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[    2.752062] clocksource: Switched to clocksource tsc
[    2.920010] usb 2-3: new high-speed USB device number 8 using ehci-pci
[    3.257900] sd 2:0:0:0: [sdb] 30310400 512-byte logical blocks: (15.5 GB/14.5 GiB)
[    3.260022] sd 2:0:0:0: [sdb] Write Protect is off
[    3.260025] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    3.262146] sd 2:0:0:0: [sdb] No Caching mode page found
[    3.262186] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[    3.364417]  sdb: sdb1
[    3.370522] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    3.532013] usb 2-3: new high-speed USB device number 10 using ehci-pci
[    3.904010] usb 2-3: new high-speed USB device number 11 using ehci-pci
[    4.064032] floppy0: no floppy controllers found
[    4.103357] PM: Starting manual resume from disk
[    4.103360] PM: Hibernation image partition 8:3 present
[    4.103360] PM: Looking for hibernation image.
[    4.103714] PM: Image not found (code -22)
[    4.103715] PM: Hibernation image not present or could not be loaded.
[    4.301397] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.240018] usb 2-3: new high-speed USB device number 16 using ehci-pci
[    5.430637] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.520937] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    5.521044] systemd[1]: Detected architecture x86-64.
[    5.528126] systemd[1]: Set hostname to <debian>.
[    5.836419] random: crng init done
[    6.456047] systemd[1]: cups.path: Cannot add dependency job, ignoring: Unit cups.path is masked.
[    6.456058] systemd[1]: cups.socket: Cannot add dependency job, ignoring: Unit cups.socket is masked.
[    6.456093] systemd[1]: cups-browsed.service: Cannot add dependency job, ignoring: Unit cups-browsed.service is masked.
[    6.456754] systemd[1]: Created slice User and Session Slice.
[    6.456826] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.456865] systemd[1]: Listening on Journal Socket.
[    6.456909] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.060018] usb 2-3: new high-speed USB device number 23 using ehci-pci
[    7.090119] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    7.239376] lp: driver loaded but no devices found
[    7.313912] ppdev: user-space parallel port driver
[    7.322452] parport_pc 00:03: reported by Plug and Play ACPI
[    7.322513] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    7.348467] RPC: Registered named UNIX socket transport module.
[    7.348469] RPC: Registered udp transport module.
[    7.348469] RPC: Registered tcp transport module.
[    7.348470] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    7.379155] systemd-journald[203]: Received request to flush runtime journal from PID 1
[    7.420240] lp0: using parport0 (interrupt-driven).
[    7.676022] usb 2-3: new high-speed USB device number 25 using ehci-pci
[    8.536018] usb 2-3: new high-speed USB device number 28 using ehci-pci
[    8.681779] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.702121] intel_rng: FWH not detected
[    8.817811] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20160422/utaddress-255)
[    8.817817] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.817845] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.840613] leds_ss4200: no LED devices found
[    8.873766] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    8.873800] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    8.873834] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    8.974037] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    9.254579] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    9.292792] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
[    9.301438] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC883: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    9.301440] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.301442] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    9.301443] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[    9.301444] snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x1e/0x0
[    9.301445] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[    9.301447] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[    9.301448] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[    9.301450] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[    9.301451] snd_hda_codec_realtek hdaudioC0D2:      CD=0x1c
[    9.313624] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    9.314349] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    9.314408] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    9.314468] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    9.314525] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    9.636480] iTCO_vendor_support: vendor-support=0
[    9.696170] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    9.696219] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[    9.696348] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    9.872016] usb 2-3: new high-speed USB device number 33 using ehci-pci
[   10.244022] usb 2-3: new high-speed USB device number 34 using ehci-pci
[   10.458648] Adding 4094972k swap on /dev/sda3.  Priority:-1 extents:1 across:4094972k FS
[   11.744049] floppy0: no floppy controllers found
[   11.832022] usb 2-3: new high-speed USB device number 40 using ehci-pci
[   12.107710] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   13.416020] usb 2-3: new high-speed USB device number 46 using ehci-pci
[   14.032021] usb 2-3: new high-speed USB device number 48 using ehci-pci
[   14.297469] systemd[1]: apt-daily.timer: Adding 11h 35min 14.082798s random time.
[   14.376796] systemd[1]: apt-daily.timer: Adding 11h 33min 9.953410s random time.
[   15.372019] usb 2-3: new high-speed USB device number 53 using ehci-pci
[   15.505957] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.521198] r8169 0000:03:00.0 eth0: link down
[   15.521257] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.748021] usb 2-3: new high-speed USB device number 54 using ehci-pci
[   16.620030] usb 2-3: new high-speed USB device number 57 using ehci-pci
[   17.092617] r8169 0000:03:00.0 eth0: link up
[   17.092630] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   17.472026] usb 2-3: new high-speed USB device number 60 using ehci-pci
[   19.190192] fuse init (API version 7.25)
[   20.272032] usb 2-3: new high-speed USB device number 71 using ehci-pci
[   20.644042] usb 2-3: new high-speed USB device number 72 using ehci-pci
[   22.220014] usb 2-3: new high-speed USB device number 78 using ehci-pci
[   23.552023] usb 2-3: new high-speed USB device number 83 using ehci-pci
[   24.164014] usb 2-3: new high-speed USB device number 85 using ehci-pci
[   24.536015] usb 2-3: new high-speed USB device number 86 using ehci-pci
[   24.908018] usb 2-3: new high-speed USB device number 87 using ehci-pci
[   25.284030] usb 2-3: new high-speed USB device number 88 using ehci-pci
[   25.302865] systemd[1]: apt-daily.timer: Adding 49min 40.990382s random time.
[   25.856024] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[   26.012030] usb 3-1: not running at top speed; connect to a high speed hub
[   26.052032] usb 3-1: New USB device found, idVendor=0aec, idProduct=3260
[   26.052035] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   26.052037] usb 3-1: Product: USB Storage Device
[   26.052039] usb 3-1: Manufacturer: GENERIC
[   26.052041] usb 3-1: SerialNumber: 200510251942096LD
[   26.055103] usb-storage 3-1:1.0: USB Mass Storage device detected
[   26.055169] scsi host3: usb-storage 3-1:1.0
[   27.079068] scsi 3:0:0:0: Direct-Access     GENERIC  USB Storage-SMC  I19B PQ: 0 ANSI: 0 CCS
[   27.084045] scsi 3:0:0:1: Direct-Access     GENERIC  USB Storage-CFC  I19B PQ: 0 ANSI: 0 CCS
[   27.089048] scsi 3:0:0:2: Direct-Access     GENERIC  USB Storage-SDC  I19B PQ: 0 ANSI: 0 CCS
[   27.094043] scsi 3:0:0:3: Direct-Access     GENERIC  USB Storage-MSC  I19B PQ: 0 ANSI: 0 CCS
[   27.094974] sd 3:0:0:0: Attached scsi generic sg3 type 0
[   27.095357] sd 3:0:0:1: Attached scsi generic sg4 type 0
[   27.095704] sd 3:0:0:2: Attached scsi generic sg5 type 0
[   27.096974] sd 3:0:0:3: Attached scsi generic sg6 type 0
[   27.333049] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[   27.338043] sd 3:0:0:1: [sdd] Attached SCSI removable disk
[   27.343041] sd 3:0:0:2: [sde] Attached SCSI removable disk
[   27.348039] sd 3:0:0:3: [sdf] Attached SCSI removable disk
[  560.758795] perf: interrupt took too long (2547 > 2500), lowering kernel.perf_event_max_sample_rate to 78500
[  623.305825] usb 2-2: USB disconnect, device number 2

fdisk -l

Disk /dev/sda: 465.8 GiB, 500106780160 bytes, 976771055 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0b0be671

Device     Boot     Start       End   Sectors   Size Id Type
/dev/sda1  *         2048  73730047  73728000  35.2G 83 Linux
/dev/sda2        73730048 968579071 894849024 426.7G 83 Linux
/dev/sda3       968579072 976769023   8189952   3.9G 82 Linux swap / Solaris

[dimitri_ns]

Οσες φορές είχα προσπαθήσει με debian live cd είχα προβλήματα.
Προτιμάω τις νορμαλ εγκαταστάσεις (όχι το netistall )

[jim_p]

Θυμαστε πριν κανα διμηνο που λεγαμε οτι μπηκαμε σε freeze?

Το freeze μας ελειπε :P

http://phoronix.com/scan.php?page=ne...n-9-Trans-Free

Ε δεν ειχαμε μπει. Χτες μπηκαμε απ' οτι φαινεται

http://phoronix.com/scan.php?page=ne...ch-Soft-Freeze

Ωραια. Το επομενο stable θα ειναι δηλαδη με το ο-θεος-να-το-κανει-stable-αλλα-τουλαχιστον-ειναι-lts plasma 5, με πυρηνα (4.9) που λεγανε οτι θα ειναι lts απο upstream αλλα προς το παρον δεν υπαρχει κατι σχετικο, ουτε ο ιδιος εχιε περασει στο unstable αν και βγηκε πριν ενα μηνα, με ff που δεν θα προλαβει να φτασει στην επομενη esr (52) πριν το τελικο freeze και αλλα τετοια που δεν τα θυμαμαι τωρα να τα γραψω.

[trd64]

Θυμαστε πριν κανα διμηνο που λεγαμε οτι μπηκαμε σε freeze?


Ε δεν ειχαμε μπει. Χτες μπηκαμε απ' οτι φαινεται

http://phoronix.com/scan.php?page=ne...ch-Soft-Freeze

Ωραια. Το επομενο stable θα ειναι δηλαδη με το ο-θεος-να-το-κανει-stable-αλλα-τουλαχιστον-ειναι-lts plasma 5, με πυρηνα (4.9) που λεγανε οτι θα ειναι lts απο upstream αλλα προς το παρον δεν υπαρχει κατι σχετικο, ουτε ο ιδιος εχιε περασει στο unstable αν και βγηκε πριν ενα μηνα, με ff που δεν θα προλαβει να φτασει στην επομενη esr (52) πριν το τελικο freeze και αλλα τετοια που δεν τα θυμαμαι τωρα να τα γραψω.

Δεν κατάλαβα τίποτε αλλά

Άσχετο αλλά στην δική μου περίπτωση τα προβλήματα με τα locks στο desktop λύθηκαν όταν έβησα τελείως το 20-radeon.conf στο /etc/X11/xorg.conf.d

[apoikos]

Θυμαστε πριν κανα διμηνο που λεγαμε οτι μπηκαμε σε freeze?


Ε δεν ειχαμε μπει. Χτες μπηκαμε απ' οτι φαινεται

http://phoronix.com/scan.php?page=ne...ch-Soft-Freeze

Γενικά το freeze δεν είναι ένα point in time, είναι μια διαδικασία με αρκετά βήματα που έχει ξεκινήσει από το Νοέμβρη με το transition freeze (= no more major library updates). To full freeze είναι στις 5/2, μέχρι τότε τα πακέτα κατεβαίνουν κανονικά από το unstable στο testing (απλά με υποχρεωτική παραμονή 10 ημερών αντί για 5 στο unstable). Η διαφορά με πριν είναι ότι πλέον:

• Δεν μπαίνουν νέα source packages (== νέο software) στο testing.
• Δεν ξαναμπαίνουν στο testing πακέτα που βγήκαν επειδή έχουν release-critical bugs που κανείς δε λύνει.

Επίσης, ακόμα και κατά τη διάρκεια του full freeze γίνονται updates στις εκδόσεις του testing (αν και σπάνια περνάνε νέα upstream releases), απλά χρειάζονται manual approval από το release team.

Το πλήρες πλάνο του freeze είναι εδώ: https://release.debian.org/

Ωραια. Το επομενο stable θα ειναι δηλαδη με το ο-θεος-να-το-κανει-stable-αλλα-τουλαχιστον-ειναι-lts plasma 5, με πυρηνα (4.9) που λεγανε οτι θα ειναι lts απο upstream αλλα προς το παρον δεν υπαρχει κατι σχετικο, ουτε ο ιδιος εχιε περασει στο unstable αν και βγηκε πριν ενα μηνα

Οι μέχρι στιγμής πληροφορίες[1] λένε ότι ο 4.9 θα είναι LTS. Από 'κει και πέρα αν o Greg K-H αλλάξει γνώμη, θα δούμε τι θα γίνει. Υπ' όψιν ότι αυτή τη στιγμή ο 4.9.1 είναι στο experimental και εικάζω ότι δεν είναι στο unstable γιατί υπάρχει αυτή η επισήμανση του Greg K-H στο [1] ότι μπορεί να κρατήσει τον 4.8 για LTS, στην οποία περίπτωση ένας 4.9 στο unstable θα μπλόκαρε το update path (Debian archive internals είναι αυτά, αλλά σε γενικές γραμμές σε περιόδους freeze θέλουμε να μπορούμε να χρησιμοποιούμε το unstable για να κάνουμε ship updates στο frozen testing). Με άλλα λόγια, αυτή τη στιγμή ο kernel maintainer (εικάζω πάλι) συντηρεί 2 branches για να είναι έτοιμος να κατεβάσει τον 4.9 στο unstable και από 'κει στο testing μόλις ξεκαθαρίσει αν θα είναι LTS ή όχι. Και έχει μέχρι τις 25/1 χρόνο για να ανεβάσει τον 4.9 στο unstable χωρίς να χρειαστεί approval από το release team για να περάσει στο testing (η οποία έγκριση θεωρώ ότι θα δωθεί αν χρειαστεί).

[1] http://kroah.com/log/blog/2016/09/06...xt-lts-kernel/

με ff που δεν θα προλαβει να φτασει στην επομενη esr (52) πριν το τελικο freeze και αλλα τετοια που δεν τα θυμαμαι τωρα να τα γραψω.

Έχει όμως το firefox-esr πακέτο που είναι ο τελευταίος ESR (45) και που αν κρίνουμε από το τι έγινε με το Jessie (όπου αλλάξαμε από Iceweasel 38 σε FF 45 1 χρόνο μετά το release) δεν αποκλείεται να γίνει update κατά τη διάρκεια ζωής του stretch.

Γενικά δεν μπορούμε να τα έχουμε όλα: browsers, kernel, DEs, DBs, όλα έχουνε διαφορετικά release schedules, κάπου θα πέσεις μέσα και κάπου όχι. Το θέμα είναι να προσαρμόζεσαι και το Debian έχει δείξει να το κάνει αυτό, τόσο κάνοντας πλέον track upstream stable branches κατά τη διάρκεια ζωής ενός stable release (Firefox, MySQL/MariaDB), όσο και με υποδομές τύπου backports.