Release Note for Vigor2860 Series
Firmware Version: 3.8.4.5
Release Type: Normal
Applied Models: Vigor2860/Vigor2860n/Vigor2860n-plus/Vigor2860Vn-plus/
Vigor2860ac/Vigor2860Vac/Vigor2860L/Vigor2860Ln
Vigor2860 series is a VDSL2 router with multi-subnet for secure and efficient workgroup
management. It integrates IP layer QoS, NAT session/bandwidth management to help users control
works well with large bandwidth.
New Features
Support VigorACS 2.
Improvement
Corrected: Router reboot while using the domain name on Syslog server address.
Corrected: Router reboot while SMB traffic passed through PPTP/L2TP VPN tunnel.
Corrected: IP Filter with direction "LAN/RT/VPN->LAN/RT/VPN" didn't work.
Corrected: DNSSEC caused router reboot.
Corrected: Isolate VPN option could not be saved in the wireless 2.4G web.
Corrected: TR-069 Port set with 8069 was opened regardless of Access List.
Corrected: LAN DNS case sensitive.
Corrected: Router stopped sending Syslog into USB disk.
Corrected: NAT loopback issue with IP Alias.
Improved: Support DHCP relay for the remote dial-in user.
Εμφάνιση 31-45 από 110
Θέμα: DRAYTEK Vigor 2860
-
06-06-17, 09:30 Απάντηση: DRAYTEK Vigor 2860 #31
-
20-07-17, 08:27 Απάντηση: DRAYTEK Vigor 2860 #32
Release Note for Vigor2860 Series
Firmware Version: 3.8.4.6
Release Type: Normal
Applied Models: Vigor2860/Vigor2860n/Vigor2860n-plus/Vigor2860Vn-plus/
Vigor2860ac/Vigor2860Vac/Vigor2860L/Vigor2860Ln
Vigor2860 series is a VDSL2 router with multi-subnet for secure and efficient workgroup
management. It integrates IP layer QoS, NAT session/bandwidth management to help users control
works well with large bandwidth.
New Features
Support BGP.
Improvement
Corrected: WAN1 increased timeout during LCP Terminate-ACK.
Corrected: IPsec traffic wasn't passed to VPN server at Vigor2860 routing subnet.
Corrected: DDNS update problem occurred when 3G modem, PPP mode was used.
File and Modem Code
For DSL models, there will be five folders: STD, VECTOR1, VECTOR2, VECTOR3 and
VECTOR4. The files in VECTOR named folder implement a new DSL driver, which supports
G.Vectoring on VDSL. If you're using a VDSL line, VECTOR named firmware may bring out better
performance; however, please consult your ISP to check if G.Vectoring is required. We also provide
two versions of modem codes to avoid the interoperability issue. You could just try the other one if
the one you use cannot synchronize or get the speed that you expected. Available modem codes for
Annex A/Annex B are displayed as follows:
For Annex A Model,
"Vigor2860_v3.8.4.6-00_en.zip" is used for modem code 548006_544401 &
560816_552011
Vigor2860_v3.8.4.6-01v_en.zip" is used for modem code 567517_562301 &
566207_562101
Vigor2860_v3.8.4.6-02v_en.zip" is used for modem code 574307_571801 &
573807_571701
Vigor2860_v3.8.4.6-03v_en.zip" is used for modem code 576d17_572801 &
574307_571801
- 2 -
Vigor2860_v3.8.4.6-04v_en.zip" is used for modem code 579c17_573f01 &
579f17_573f01
For Annex B Model,
"Vigor2860_v3.8.4.6-00_en.zip" is used for modem code 548006_544512 &
551716_553312
"Vigor2860_v3.8.4.6-01v_en.zip" is used for modem code 565607_567002 &
565606_567002
"Vigor2860_v3.8.4.6-02v_en.zip" is used for modem code 573307_571c02 &
565607_567002
Known Issue
Vigor router will fail to send multiple papers/files from Phone1 to Phone 2 with FAX
mechanism.
-
25-07-17, 17:06 Απάντηση: DRAYTEK Vigor 2860 #33
Παρήγγειλα ένα Draytek 2860 annex B απο Αγγλία.
Παίρνω Vdsl 50 από καμπίνα ΟΤΕ.
Ποια έκδοση firmware να βάλω;
-
26-07-17, 00:11 Απάντηση: DRAYTEK Vigor 2860 #34
την τελαυταια φυσικα (3.8.4.6) που εχει οτι καλυτερο fix υπαρχει και εχει και security update
-
03-08-17, 11:04 Απάντηση: DRAYTEK Vigor 2860 #35
-
14-08-17, 17:41 Απάντηση: DRAYTEK Vigor 2860 #36
Draytek 2860 annex A
Firmware 3.8.4.6 vector 2
Βελτιώθηκε η ταχύτητα και το ping με το speedtest.
Vdsl 50
Όσο αφορά το μενού δεν έχω δει κάποια διαφορά.
-
02-09-17, 03:38 Απάντηση: DRAYTEK Vigor 2860 #37
Release Note for Vigor2860 Series
Firmware Version: 3.8.5
-
11-09-17, 23:15 Απάντηση: DRAYTEK Vigor 2860 #38
Release Note for Vigor2860 Series
Firmware Version: 3.8.5
Release Type: Normal
Applied Models: Vigor2860/Vigor2860n/Vigor2860n-plus/Vigor2860Vn-plus/
Vigor2860ac/Vigor2860Vac/Vigor2860L/Vigor2860Ln
Vigor2860 series is a VDSL2 router with multi-subnet for secure and efficient workgroup
management. It integrates IP layer QoS, NAT session/bandwidth management to help users control
works well with large bandwidth.
New Features
Support SIP & RTSP ALG. (NAT >> ALG).
Support wireless 2.4G & 5G roaming (Wireless LAN (2.4GHz) >> Roaming & Wireless
LAN(5GHz) >> Roaming).
Support large LAN subnet, and subnet network mask could be “/22”.
Support white/black list in DNS filter (CSM >> DNS Filter).
Support backup configuration to USB disk automatically at regular intervals (System
Maintenance >> Configuration Backup).
Support reset data quota monthly in user management (User Management >>User
Profile).
Support IP Group/Objects in Load-Balance/Route Policy rules.
Add an option to send debug log by mail (System Maintenance >> SysLog / Mail Alert
Setup).
Support bridge video streaming from a PVC to a WLAN SSID (WAN >>
Multi-PVC/VLAN).
Support alert & log in switch management (Central Management >> Switch >> Alert and
Log).
Improvement
Improved: Support IKEv2 in Remote Dial-in User and LAN to LAN (in VPN and Remote
Access>>Remote Dial-in User and VPN and Remote Access>>LAN to LAN).
Improved: Forward Packets from WAN to Remote VPN Network.
Improved: Protocol could be "TCP/UDP" as default setting in NAT setting instead of
"---".
Improved: Add LAN1 to LAN Access Control.
- 2 -
Improved: Import X.509 certificate via SSH (mngt cert_import cmd).
Corrected: QoS failed to work when bandwidth limit was enabled.
Corrected: Fix incorrect DNS filter behavior.
Corrected: PPTP VPN displayed RADIUS / LDAP authentication logs when RADIUS /
LDAP was disabled.
Corrected: ARP entry configured manually could be cleared after 3 minutes.
Corrected: “On Line” link of external device only supported HTTP port 80.
Corrected: The performance of L2TP over IPsec was poor, when DoS defense was
enabled.
Corrected: DHCP offer was recognized as DoS trace route.
Corrected: VoIP was dropped, when Broadsoft Cloud PBX service was used.
Corrected: RTP SSRC value calculation issue.
Corrected: Failed to login the router by Syslog telnet facility.
Corrected: DNS Forwarding failed to work when the DNS server located in LAN.
Corrected: Web Portal setup issues with Safari in OS X.
Corrected: Create Root CA certificate start date was 1 day after time of creation.
Corrected: TCP port 8001 and 8043 were opened on WAN.
Corrected: TCP port 8069 was opened regardless of Access Control List.
Corrected: LAN DNS case sensitive issue.
Corrected: FTP Privileged port bounce scan issue.
File and Modem Code
For DSL models, there will be five folders: STD, VECTOR1, VECTOR2, VECTOR3 and
VECTOR4. The files in VECTOR named folder implement a new DSL driver, which supports
G.Vectoring on VDSL. If you're using a VDSL line, VECTOR named firmware may bring out better
performance; however, please consult your ISP to check if G.Vectoring is required. We also provide
two versions of modem codes to avoid the interoperability issue. You could just try the other one if
the one you use cannot synchronize or get the speed that you expected. Available modem codes for
Annex A/Annex B are displayed as follows:
For Annex A Model,
"Vigor2860_v3.8.5-00_en.zip" is used for modem code 548006_544401 &
560816_552011
Vigor2860_v3.8.5-01v_en.zip" is used for modem code 567517_562301 &
566207_562101
Vigor2860_v3.8.5-02v_en.zip" is used for modem code 574307_571801 &
573807_571701
Vigor2860_v3.8.5-03v_en.zip" is used for modem code 576d17_572801 &
574307_571801
Vigor2860_v3.8.5-04v_en.zip" is used for modem code 579c17_573f01 &
579f17_573f01
- 3 -
For Annex B Model,
"Vigor2860_v3.8.5-00_en.zip" is used for modem code 548006_544512 &
551716_553312
"Vigor2860_v3.8.5-01v_en.zip" is used for modem code 565607_567002 &
565606_567002
"Vigor2860_v3.8.5-02v_en.zip" is used for modem code 573307_571c02 &
565607_567002
Known Issue
Vigor router will fail to send multiple papers/files from Phone1 to Phone 2 with FAX
mechanism.
RD
-
20-10-17, 19:58 Απάντηση: DRAYTEK Vigor 2860 #39For DSL models, there will be five folders: STD, VECTOR1, VECTOR2, VECTOR3 and
VECTOR4Network, Software & Hardware Solutions
-
21-10-17, 00:56 Απάντηση: DRAYTEK Vigor 2860 #40
Απο εδω
http://www.draytek.com.tw/ftp/Vigor2...ware/v3.8.4.6/
διαλεγεις το πιο τελευταιο λογισμικο, εδω
http://www.draytek.com.tw/ftp/Vigor2...ware/v3.8.4.6/
και νομιζω ειναι το τελευταιο που λεει _04
-
23-10-17, 22:41 Απάντηση: DRAYTEK Vigor 2860 #41
παιδιά μόλις πήρα το draytek μεταχειρισμένο από ebay λόγο ότι θέλω να γυρίσω ξανά σε draytek και φυσικά γιατί το δίκτυο που έχω στο σπίτι θέλει ένα σοβαρό modem router για να διαχειριστεί την κατάσταση.
Τώρα βλέπω την εικόνα και έχει μια θύρα παράξενη για την σύνδεση του vdsl/adsl δεν την έχω ξαναδεί να έχει αυτές τις δύο εγκοπες δεξιά αριστερά
κάτι άλλο που θέλω να ρωτήσω είναι ότι είδα εδώ στην σελίδα τους ότι το firmware που αντιμετωπίζει το πρόβλημα του KRACK είναι το 3.8.5.1 αλλά όταν πάω στην σελίδα τους για τα firmware βλέπω διαθέσιμο μόνο το 3.8.5
Το router δεν το έχω ακόμα στα χέρια μου αλλά περιμένω να έρθει.To blog της Ελληνικής κοινότητας του bitcoin
1HeyFM6xMpq8s7BahqEuNPcTedDjhNUsoc
4411 804B 0181 F444 ADBD 01D4 0664 00E4 37E7 228E
-
24-10-17, 11:00 Απάντηση: DRAYTEK Vigor 2860 #42
αν ενοεις αυτη που ειναι διπλα απο τα usb εκει συνεεις το καλωδιο απο την πριζα του τηλεφωνου δεν ειναι παραξενη
-
24-10-17, 11:45 Απάντηση: DRAYTEK Vigor 2860 #43
στη θυρα vdsl/adsl εκει παει το καλωδιο τηλεφωνου ... στη θυρα wan παει αλλο router για 2η γραμμη ή να το κανεις σκετο router
To 3.8.5.1 θα ερθει μελλοντικα, οποτε σωστα το τελευταιο μεχρι τωρα ειναι το 3.8.5, ριχνε καμια ματια στο site τους, δεν ξερω ποτε θα ειναι ετοιμο
-
24-10-17, 15:11 Απάντηση: DRAYTEK Vigor 2860 #44
thx για τις απαντήσεις. Τις νέας γενάς γραμμές VDSL Vectoring to υποστηρίζει το router γιατί είδα να αναφέρετε σε προηγούμενα post την αναβάθμιση σε ένα τέτοιο firmware. Αξίζει αυτή η αναβάθμιση τώρα η απλά όταν γίνει η αναβάθμιση του δικτύου από τον OTe?
To blog της Ελληνικής κοινότητας του bitcoin
1HeyFM6xMpq8s7BahqEuNPcTedDjhNUsoc
4411 804B 0181 F444 ADBD 01D4 0664 00E4 37E7 228E
-
24-10-17, 19:08 Απάντηση: DRAYTEK Vigor 2860 #45
Παρόμοια Θέματα
-
Σύνδεση draytek vigor 2760n με vdsl connx
Από giorgiosb στο φόρουμ Draytek ADSL modems και routersΜηνύματα: 0Τελευταίο Μήνυμα: 09-01-16, 16:44 -
Draytek Vigor 910c
Από ReD-RevolutioN στο φόρουμ Draytek ADSL modems και routersΜηνύματα: 0Τελευταίο Μήνυμα: 01-10-15, 12:15 -
Draytek Vigor 2860 ή 2760;
Από Koulou στο φόρουμ Draytek ADSL modems και routersΜηνύματα: 11Τελευταίο Μήνυμα: 12-06-15, 20:59 -
Draytek Vigor 2710Vn και WoL απο το Ιντερνετ
Από prince72 στο φόρουμ Draytek ADSL modems και routersΜηνύματα: 16Τελευταίο Μήνυμα: 12-06-15, 03:37 -
Vigor 2860 και VoIp
Από italianrulez στο φόρουμ Draytek ADSL modems και routersΜηνύματα: 0Τελευταίο Μήνυμα: 04-04-15, 14:40
Bookmarks