Καλησπερα.
Εχω βάλει ενα ADSL MODEM σε Bridge mode και προσπαθώ να στήσω τον 2811 να κάνει pppoe μεσω τις FA0/0. H FA0/0 είναι συνδεμένη με το modem.
παραθέτω config.
Κώδικας:Router> Router>en Router#sh ver Cisco IOS Software, 2800 Software (C2800NM-IPVOICEK9-M), Version 15.1(4)M6, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2013 by Cisco Systems, Inc. Compiled Thu 14-Feb-13 04:14 by prod_rel_team ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) Router uptime is 1 minute System returned to ROM by power-on System image file is "flash:c2800nm-ipvoicek9-mz.151-4.M6.bin" Last reload type: Normal Reload This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. Cisco 2811 (revision 1.0) with 512000K/12288K bytes of memory. Processor board ID FCZ1224714F 2 FastEthernet interfaces DRAM configuration is 64 bits wide with parity enabled. 239K bytes of non-volatile configuration memory. 1957536K bytes of ATA CompactFlash (Read/Write) License Info: License UDI: ------------------------------------------------- Device# PID SN ------------------------------------------------- *0 CISCO2811 FCZ1224714F Configuration register is 0x2102με sh ip int brief βλέπω όλα up αλλά καμία public ip στον dialer. Επίσης με debug ppp authe δεν παίρνω κανένα αποτέλεσμα αν εχω κανει λαθος username pass. Εχω δοκιμασει και αλλο routeraki bridge mode.Κώδικας:Router#sh run Building configuration... Current configuration : 1305 bytes ! version 15.1 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router ! boot-start-marker boot-end-marker ! ! ! no aaa new-model ! dot11 syslog ip source-route ! ! ip cef ! ! ! no ipv6 cef multilink bundle-name authenticated ! ! ! ! ! ! ! ! ! ! ! voice-card 0 ! crypto pki token default removal timeout 0 ! ! ! ! license udi pid CISCO2811 sn FCZ1224714F ! ! ! ! ! ! ! interface FastEthernet0/0 no ip address duplex auto speed auto pppoe enable group global pppoe-client dial-pool-number 1 ! interface FastEthernet0/1 ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly in duplex auto speed auto ! interface Dialer1 ip address negotiated ip nat outside ip virtual-reassembly in encapsulation ppp dialer pool 1 ppp authentication chap pap callin ppp pap sent-username χχχχχχχχ password 0 χχχχχ ppp ipcp route default ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip nat inside source list 100 interface Dialer1 overload ip route 0.0.0.0 0.0.0.0 Dialer1 ! access-list 100 permit ip 192.168.1.0 0.0.0.255 any ! ! ! control-plane ! ! ! ! mgcp profile default ! ! ! ! ! line con 0 line aux 0 line vty 0 4 login transport input all ! scheduler allocate 20000 1000 end Router#
Ευχαριστώ εκ των προτέρων
- - - Updated - - -
Δεν ξέρω πως αλλά τελικά δούλεψε.
Παραθέτω config για όποιον αντιμετωπίσει το ίδιο.
Κώδικας:no ip domain lookup no ipv6 cef multilink bundle-name authenticated vpdn enable ! vpdn-group 1 ! ! ! ! ! ! ! ! voice-card 0 ! crypto pki token default removal timeout 0 ! ! ! ! license udi pid CISCO2811 sn FCZ1224714F ! ! ! ! ! ! ! interface FastEthernet0/0 no ip address ip virtual-reassembly in duplex auto speed auto pppoe enable group global pppoe-client dial-pool-number 1 no cdp enable ! interface FastEthernet0/1 ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly in duplex auto speed auto ! interface Dialer1 ip address negotiated ip nat outside ip virtual-reassembly in encapsulation ppp dialer pool 1 ppp authentication chap pap callin ppp pap sent-username xxxxx password 0 xxxxx ppp ipcp dns request ppp ipcp route default ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip nat inside source list 100 interface Dialer1 overload ! access-list 100 permit ip 192.168.1.0 0.0.0.255 any access-list 100 permit ip 192.168.2.0 0.0.0.255 any ! ! ! control-plane ! ! ! ! mgcp profile default ! ! ! ! ! line con 0 line aux 0 line vty 0 4 login transport input all ! scheduler allocate 20000 1000 end Router#
Εμφάνιση 1-1 από 1
-
08-10-16, 12:26 Cisco 2800 pppoe over ethernet #1
Παρόμοια Θέματα
-
βιβλίο cisco
Από johnyb98 στο φόρουμ NetworkingΜηνύματα: 2Τελευταίο Μήνυμα: 12-10-16, 11:42 -
Τα φτυσε η ethernet κάρτα :(
Από Artemius στο φόρουμ Hardware ΓενικάΜηνύματα: 4Τελευταίο Μήνυμα: 03-10-16, 18:46 -
Vigor 2800 VGi
Από Tem στο φόρουμ Draytek ADSL modems και routersΜηνύματα: 11Τελευταίο Μήνυμα: 28-11-15, 14:46
Bookmarks