Σελ. 222 από 588 ΠρώτηΠρώτη ... 202212217220221222223224227232242 ... ΤελευταίαΤελευταία
Εμφάνιση 3.316-3.330 από 8814
  1. #3316
    Εγγραφή
    28-03-2006
    Περιοχή
    KV G434
    Ηλικία
    49
    Μηνύματα
    42.180
    Downloads
    23
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    310/31
    ISP
    Cosmote
    DSLAM
    ΟΤΕ - ΕΡΜΟΥ
    Router
    RB4011iGS+5 ONT: G-010G-R
    Παράθεση Αρχικό μήνυμα από soniko Εμφάνιση μηνυμάτων
    Καλησπέρα , ξερει κοποιος να μου πει τις ρυθμισεις για voip τηλεφωνια στο fritz7530 σε vodafone? Τους πηρα τηλ αλλα καταληξαμε να μου στειλουν δικο τους κανιουργιο modem. Σε οτε μου επαιξε με την μια χωρις προβληματα.
    Παλιότερα λέγαμε ότι δεν μπορεί να γίνει.
    Τώρα τελευταία αναφέρθηκαν κάποιοι που το δοκίμασαν και έπαιξε.
    Κάπου το έχει αναφέρει κάποιος.
    | "Anyone can build a fast CPU.
    | The trick is to build a fast system."
    |____________Seymour Cray...

  2. #3317
    Εγγραφή
    18-03-2009
    Ηλικία
    53
    Μηνύματα
    52
    Downloads
    11
    Uploads
    0
    Τύπος
    ADSL HOL Full
    Ταχύτητα
    15471/814 Kbps
    DSLAM
    HOL - ΚΥΔΩΝΑΣ
    Router
    Linksys WAG160N
    SNR / Attn
    11.5(dB) / 22(dB)
    Σε ευχαριστω deniSun,μπορεις να θυμηθεις που το ειδες ? Υπαρχει κατι σε οδηγος?

  3. #3318
    Εγγραφή
    30-04-2016
    Ηλικία
    42
    Μηνύματα
    341
    Downloads
    1
    Uploads
    0
    Τύπος
    VDSL2
    Ταχύτητα
    51200/5120
    ISP
    Cosmote
    Path Level
    Interleaved
    Παράθεση Αρχικό μήνυμα από deniSun Εμφάνιση μηνυμάτων
    Παλιότερα λέγαμε ότι δεν μπορεί να γίνει.
    Τώρα τελευταία αναφέρθηκαν κάποιοι που το δοκίμασαν και έπαιξε.
    Κάπου το έχει αναφέρει κάποιος.
    Είσαι σίγουρος; Το έχω δοκιμάσει σε γραμμή adsl με ένα 7490, τελευταίο firmware, και δεν έπαιξε πάντως.

  4. #3319
    Εγγραφή
    28-03-2006
    Περιοχή
    KV G434
    Ηλικία
    49
    Μηνύματα
    42.180
    Downloads
    23
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    310/31
    ISP
    Cosmote
    DSLAM
    ΟΤΕ - ΕΡΜΟΥ
    Router
    RB4011iGS+5 ONT: G-010G-R
    Παράθεση Αρχικό μήνυμα από ilpapacha Εμφάνιση μηνυμάτων
    Είσαι σίγουρος; Το έχω δοκιμάσει σε γραμμή adsl με ένα 7490, τελευταίο firmware, και δεν έπαιξε πάντως.
    Για το ότι δεν έπαιζε... ναι είμαι σίγουρος.
    Για το ότι κάποιος έγραψε ότι τα κατάφερε με voda... έτσι θυμάμαι.
    Δεν έχω κρατήσει link.
    Ας το επιβεβαιώσει κάποιος αν μπορεί.
    | "Anyone can build a fast CPU.
    | The trick is to build a fast system."
    |____________Seymour Cray...

  5. #3320
    Εγγραφή
    18-03-2009
    Ηλικία
    53
    Μηνύματα
    52
    Downloads
    11
    Uploads
    0
    Τύπος
    ADSL HOL Full
    Ταχύτητα
    15471/814 Kbps
    DSLAM
    HOL - ΚΥΔΩΝΑΣ
    Router
    Linksys WAG160N
    SNR / Attn
    11.5(dB) / 22(dB)
    Το εκανα να δουλεψει θα στειλω σε λιγο πληροφοριες

    - - - Updated - - -

    Πρεπει να μπεις στο zth modem σαν root -https://www.adslgr.com/forum/threads/1014169-%CE%95%CE%BC%CF%80%CE%B5%CE%B9%CF%81%CE%AF%CE%B5%CF%82-%CE%B1%CF%80%CF%8C-router-ZTE-ZXHN-H267A?p=6445422#post6445422-----και να κανεις backup, μετα ανοιγουμε το αρχειο config.bin με το routerpassview και βρισκουμε τον κωδικο του voip.
    Τελευταία επεξεργασία από το μέλος soniko : 05-07-20 στις 09:12.

  6. #3321
    Εγγραφή
    28-03-2006
    Περιοχή
    KV G434
    Ηλικία
    49
    Μηνύματα
    42.180
    Downloads
    23
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    310/31
    ISP
    Cosmote
    DSLAM
    ΟΤΕ - ΕΡΜΟΥ
    Router
    RB4011iGS+5 ONT: G-010G-R
    Γιατί δεν δίνουν τις κωδικούς τηλεφωνίας... δεν το κατάλαβα ποτέ.
    | "Anyone can build a fast CPU.
    | The trick is to build a fast system."
    |____________Seymour Cray...

  7. #3322
    Εγγραφή
    18-03-2009
    Ηλικία
    53
    Μηνύματα
    52
    Downloads
    11
    Uploads
    0
    Τύπος
    ADSL HOL Full
    Ταχύτητα
    15471/814 Kbps
    DSLAM
    HOL - ΚΥΔΩΝΑΣ
    Router
    Linksys WAG160N
    SNR / Attn
    11.5(dB) / 22(dB)
    Ουτε εγω!!!

  8. #3323
    Εγγραφή
    04-11-2005
    Περιοχή
    Ελληνικό, Αττική
    Ηλικία
    59
    Μηνύματα
    234
    Downloads
    7
    Uploads
    0
    Τύπος
    VDSL2
    Ταχύτητα
    55000/5500
    ISP
    Nova
    DSLAM
    Forthnet - ΤΕΡΨΙΘΕΑ
    Router
    FRITZ! Box 7590
    SNR / Attn
    24(dB) / 10(dB)
    Path Level
    Fastpath
    Εγώ έχω αποκομίσει την αίσθηση ότι τι κάνουν για να σε υποχρεώσουν να βάλεις δικό τους router. Αν έχω καταλάβει σωστά, δεν είναι τσάμπα πια, οπότε δεν έχουν την χασούρα, και για πιο φτηνό support βολεύει να έχεις τις μπαγκατέλες που σου δίνουν, που σε αυτές ούτε "περίεργα" πράγματα μπορείς να κάνεις, αλλά έχουν και πρόσβαση μέσω TR-069
    NAS: QNAP TS-653D-4G@16GB with WD6003FRYZ Backup NAS: QNAP TS459 Pro+ with WD50EFRX &Promise Smartstor NS4600 with WD30EZRX (iSCSI)
    UPS: Back-UPS RS BR1200LCDI Router: AVM Fritz!Box 7590 Switch: Netgear GSS116E

    Dell Latitude E6520 (i7-2720QM CPU @ 2.20GH, 16GB, SSD)
    Custom PC (GA-EX58-UD5, Zeon X5650, 12GB, Gigabyte GV-N98TSL-1GB nVidia, SSD, WD Velociraptor WD3000HLFS, other HDs)

  9. #3324
    Εγγραφή
    05-05-2009
    Περιοχή
    Παλαιό Φάληρο
    Μηνύματα
    12.617
    Downloads
    0
    Uploads
    0
    Ταχύτητα
    FTTH Φως το αληθ
    ISP
    OTE
    Router
    Fritz 7590
    Παράθεση Αρχικό μήνυμα από deniSun Εμφάνιση μηνυμάτων
    Γιατί δεν δίνουν τις κωδικούς τηλεφωνίας... δεν το κατάλαβα ποτέ.
    Γιατί αγαπάνε με πάθος την cosmote
    Οπου ιδίως στο FTTH που δεν υπαρχει διαφορά τιμής, είναι μονόδρομος.
    " Ούτε λαχανικά δεν θα φόρτωνα. "

    ----
    No fm radio ?
    No headphone jack ?

    Sorry no phone.

  10. #3325
    Εγγραφή
    30-04-2016
    Ηλικία
    42
    Μηνύματα
    341
    Downloads
    1
    Uploads
    0
    Τύπος
    VDSL2
    Ταχύτητα
    51200/5120
    ISP
    Cosmote
    Path Level
    Interleaved
    Παράθεση Αρχικό μήνυμα από deniSun Εμφάνιση μηνυμάτων
    Για το ότι δεν έπαιζε... ναι είμαι σίγουρος.
    Για το ότι κάποιος έγραψε ότι τα κατάφερε με voda... έτσι θυμάμαι.
    Δεν έχω κρατήσει link.
    Ας το επιβεβαιώσει κάποιος αν μπορεί.
    Το ότι δεν έπαιζε το γνωρίζω. Έχω μια γραμμή adsl από εποχή HOL. Μόλις βρέθηκαν οι κωδικοί για root και μπορούσες να πάρεις τους κωδικούς της VoIP, αντικαταστάθηκε με ένα ωραιότατο 7430. Τον τελευταίο καιρό έχω βάλει ένα 7490, όπου έβαλα το προφίλ της Vodafone, αλλά δεν τράβηξε τους κωδικούς της VoIP δυστυχώς. Απ ότι έχω δει πάντως έχουν βρεθεί τρόποι και για το ZTE και το H300 να πάρεις τους κωδικούς και μετά να τους περάσεις χειροκίνητα στο modem της αρεσκείας σου.

  11. #3326
    Εγγραφή
    20-05-2003
    Ηλικία
    44
    Μηνύματα
    679
    Downloads
    6
    Uploads
    0
    Τύπος
    VDSL2
    Ταχύτητα
    220000/22000
    ISP
    COSMOTE
    DSLAM
    ΟΤΕ - Ν. ΣΜΥΡΝΗ
    Router
    Fritzbox 7590
    Path Level
    Fastpath
    FritzOS 7.20 officially available

  12. #3327
    Εγγραφή
    25-02-2005
    Περιοχή
    Αθήνα - Αμπελόκηποι
    Ηλικία
    60
    Μηνύματα
    25.371
    Downloads
    26
    Uploads
    5
    Τύπος
    FTTH
    Ταχύτητα
    110Mbps/11Mbps
    ISP
    ΟΤΕ Conn-x
    DSLAM
    ΟΤΕ - ΓΗΡΟΚΟΜΕΙΟ
    Router
    Fritz 7590
    Και το release note (μπόλικο πράγμα):

    Spoiler:
    Version: FRITZ!OS 7.20

    Language: Dutch, English, French, German, Italian, Polish, Spanish

    Release date: 06/07/2020
    ```

    # Top functions of FRITZ!OS

    - more Wi-Fi security thanks to new WPA3 encryption
    - public Wi-Fi for guests with encrypted data (OWE)
    - better Wi-Fi performance with mesh steering and mesh autochanel
    - convenient enabling and disabling of internet access for specific devices
    - nearly triple the VPN performance
    - secure telephony with German Telekom due to encrypted voice
    - more comfort for your online contacts, answering machine and fax
    - smart telephone book shows matching entries while dialing on FRITZ!Fon
    - support for new products: FRITZ!DECT 500 LED light and four-button FRITZ!DECT 440 switch
    - multilingual: change the language of your FRITZ!Box and FRITZ!Fon
    - faster FRITZ!NAS (\\fritz.nas) with new SMB version

    # New functions of FRITZ!OS

    ## Internet:
    - **NEW** With parental controls enabled, settings and ticket entry for the device to be accessed are displayed when the user interface is opened
    - **NEW** Support for encrypted resolution from domain names to IP addresses (DNS over TLS)
    - **NEW** Simplified configuration of internet connection on 1&1 lines (zero-touch)


    ## DSL:
    - **NEW** Support for VDSL Long Reach

    ## Wireless:
    - **NEW** Encryption according to the new WPA3 standard (including Wi-Fi guest access, connections to Mesh Repeaters and internet access via Wi-Fi with SAE)
    - **NEW** An open Wi-Fi network can be offered at the Wi-Fi guest access, in which only data are transmitted in encrypted form (Enhanced Open/Opportunistic Wireless Encryption, OWE)
    - **NEW** 160-MHz channel bandwidth is now always active in the 5-GHz band, providing for very high transmission rates with compatible wireless devices
    - **NEW** "Zero Wait DFS" (no waiting times for radar events) also possible for 160 MHz bandwidth (5-GHz band)

    ## Mesh:
    - **NEW** Mesh auto-channel: Accounts for the wireless environment of the Mesh Repeater in selecting the best Wi-Fi channel for the entire Mesh

    ## Telephony:
    - **NEW** Support for online contacts from Apple (iCloud), Telekom Mail, and CardDAV providers
    - **NEW** Support for encrypted telephony (TLS and SRTP) for Deutsche Telekom, Easybell and dus.net

    ## DECT/FRITZ!Fon:
    - **NEW** Nine new ring tones to choose from
    - **NEW** Smart telephone book displays matching suggestions even during number entry
    - **NEW** Sound settings for playing back web radio stations and to improve the speech quality of telephone calls
    - **NEW** Start screen to display the temperature of a compatible Smart Home device in the home network (for instance, FRITZ!DECT 200, FRITZ!DECT 30x, FRITZ!DECT 440)

    ## Home Network:
    - **NEW** Network passwords for the powerline network can now be changed on FRITZ!Powerline devices connected directly (via LAN)


    ## Smart Home:
    - **NEW** Smart Home: NEW - Reworked Smart Home pages on the FRITZ!Box user interface
    - **NEW** Smart Home: NEW - Synchronization of the temperature setting, the boost mode and open window detection within a group of radiator controls
    - **NEW** Smart Home: NEW - Display of total consumption (kWh) of the past two years for the smart plugs FRITZ!DECT 200 and 210
    - **NEW** Smart Home: NEW - The "Adaptive Heating" feature of the FRITZ!DECT 301 makes the configured temperature available at the desired time
    - **NEW** Smart Home: NEW - Supports the FRITZ!DECT 500 LED light
    - **NEW** Smart Home: NEW - Supports the four-button switch FRITZ!DECT 440
    - **NEW** Smart Home: NEW - Supports the DECT ULE/HAN FUN roller blinds profile

    ## USB:
    - **NEW** The SMBv3/v2 protocol of the Windows network drive function is supported by default; optionally, SMBv1 can still be supported
    - **NEW** Media contents like images, music and videos are indexed automatically with "Refresh index automatically" and made available to the home network

    ## System:
    - **NEW** Time period for automatic updates can be defined
    - **NEW** NEW - Users supported in becoming acquainted with FRITZ!Box functions with welcome page
    - **NEW** Display of the user interface in English, French, German, Italian, Polish or Spanish
    - **NEW** Setting of language, country and time zone for FRITZ!Box operation

    ## Mobile Communications:
    - **NEW** Expanded failover protection to automatically switch to an internet connection using the mobile broadband modem when the internet connection via the DSL or WAN connection fails

    ## Repeater:
    - **NEW** Support for encryption according to the WPA3 standard (SAE)
    - **NEW** Support for "WPA3/WPA2 Transition Mode" for configuring the user interface (repeater only)
    - **NEW** Optimization of repeater connection with a FRITZ!Box with support for Wi-Fi channels 160 MHz wide


    # Further Improvements of FRITZ!OS

    ## Internet:
    - **Improved** Message upon failed ticket entry (parental controls)
    - **Improved** Display and modification of the IPv6 Interface ID under "Home Network / Network / Network Connections"
    - **Improved** Any domain name can be used to address a VPN remote peer, not just MyFRITZ! domain names
    - **Improved** NetBIOS permission can be configured individually for a single VPN connection
    - **Improved** Ticket for parental controls can be entered before start of online block, so that usage time can be extended without interruption
    - **Improved** Additional links from the user interface in the online help for IPv4 and IPv6 routes under "Network Connections"
    - **Improved** Optimized display of the DSL/Fiber information in the user interface
    - **Improved** IPv6 prefix delegations and IPv6 subnets are displayed under "Home Network / Network / Network Settings"
    - **Improved** IP address range for guest network increased to up to 253 devices
    - **Improved** Incorrect configuration by using the same network address on both sides of a LAN-LAN linkup for VPN prevented
    - **Improved** Access to the myfritz.net domain for a downstream FRITZ!Box registered with MyFRITZ! allowed from the home network
    - **Improved** Greatly improved performance for VPN
    - **Improved** In the context of encrypted name resolution (DNS over TLS, DoT), SNI (Server Name Indication) is supported
    - **Improved** When "Internet connection via LAN 1" is selected, the integrated cable modem is disabled to optimize power consumption (FRITZ!Box Cable only)
    - **Improved** Support for multiple DNS queries over a single TCP connection
    - **Change** Unnecessary settings option for connection speed removed from "IP Client" mode
    - **Change** Button for changing the access profiles under the Parental Controls Overview in the user interface
    - **Change** First configuration simplified by removing the double query about DSL or WAN connection (only for FRITZ!Box with dedicated WAN connection, e.g. 7590)
    - **Change** Kabel BW and Unitymedia removed from provider list
    - **Change** "Emule" protocol removed from selection for port sharing
    - **Change** IP compression (data compression) is no longer supported in VPN connections
    - **Fixed** Option for "PPPoE Passthrough" missing under "other providers" (only ata boxes)
    - **Fixed** "Diagnostics / Function" showed wrong error message for MyFRITZ! registration for FRITZ!Boxes in IP client mode
    - **Fixed** Defective links behind "MyFRITZ!" under "Diagnostics / Security"
    - **Fixed** VPN connection name was not displayed in network connections and Mesh Overview
    - **Fixed** In the VPN overview table "local network" was missing and "remote network" left empty
    - **Fixed** Devices that are connected to a downstream router via IPv6 prefix delegation received no IPv6 internet connection when parental controls were enabled
    - **Fixed** Devices that are connected to a downstream router via IPv4 static routes received no IPv4 internet connection when parental controls were enabled
    - **Fixed** Port sharing for different devices with the same name could not be created
    - **Fixed** Adaptations of DSL line speed were no longer accounted for after restart
    - **Fixed** Occasional restarts of FRITZ!Box during many parallel FTP transmissions over WAN
    - **Fixed** Problems with umlauts in the parental control filter lists
    - **Fixed** Guest network lock in the parental controls did not lock reliably
    - **Fixed** No automatic Wake on LAN (WoL) via VPN
    - **Fixed** Prioritization settings for devices with the "Everything except surfing and mail" access profile were no longer applied after rebooting

    ## DSL:
    - **Improved** Interoperability for supervectoring 35b
    - **Change** Resdesigned display of the "DSL Information" in the user interface

    ## Wireless:
    - **Improved** Redesigned the print output of information on the wireless guest access
    - **Improved** "WPA3" option added to the encryption of the FRITZ!Box in "Mesh Repeater" operating mode
    - **Change** Reworked information page (for instance, after changes to Wi-Fi configuration)
    - **Change** WPS/PIN method removed
    - **Change** Outdated WPA/TKIP encryption removed
    - **Fixed** "Wireless / Guest access": Duration for disabling automatically could not be changed
    - **Fixed** Sorting by MAC addresses in "Wi-Fi / Wi-Fi Network / Security" did not work
    - **Fixed** "Delete" button for devices was displayed even if the device could not actually be deleted
    - **Fixed** PMF option no longer offered for "WPA/TKIP" encryption selection
    - **Fixed** Detection of interference did not work under certain rare circumstances
    - **Fixed** Time stamp "Wireless LAN channels used" corrected (5-GHz band)
    - **Fixed** Incorrect entry no longer appears in the "Event Log" when individual wireless bands were enabled or disabled manually on a FRITZ!Repeater 3000

    ## Mesh:
    - **Improved** Rendering of DHCP host name, media server name and SMB name on Mesh Repeaters improved
    - **Improved** Improved text for configuration of a FRITZ!Box as a Mesh Repeater
    - **Improved** Better detection of terminal devices that cannot be rerouted via Mesh steering
    - **Improved** Notification in FRITZ!Box log when a network loop is created (for instance, simultaneous LAN and wireless connection to the same device)
    - **Improved** Notification in FRITZ!Box log when a network loop is created (for instance, simultaneous LAN and wireless connection to the same device)
    - **Change** On a FRITZ!Box configured as a Mesh Repeater, the option for adopting the settings in the Mesh is offered only after Mesh was enabled on this FRITZ!Box
    - **Fixed** Display of FRITZ!Powerline 520/530E in the Mesh connection diagram was not correct
    - **Fixed** In certain cases a FRITZ!Repeater was displayed twice in the "Mesh Overview" of the FRITZ!Box
    - **Fixed** When telephony in the Mesh is used, telephony registration of a FRITZ!Box used as a Mesh Repeater was sometimes prevented by the Mesh Master
    - **Fixed** For wireless guest access the steering characteristics (11k/v) of wireless devices were not taken into account correctly (Google Pixel 2 and SAMSUNG S10)

    ## Telephony:
    - **Improved** Calls from door intercoms (including images) added to "Calls" push mail
    - **Improved** "Always register via an internet connection" option added for SIP trunk providers
    - **Improved** More detailed messages for security-relevant changes to settings
    - **Improved** New telephony providers added for the country setting "Italy": TIM, Fastweb, Vodafone and others
    - **Improved** Telephony providers O2, PYUR and multiple SIP trunk providers added
    - **Improved** Telephone numbers can be assigned to multiple answering machines, so that up to ten different greetings can be scheduled to play on one telephone number
    - **Improved** For operation of ISDN devices, advanced settings are offered under "Telephony Device" in the user interface
    - **Improved** The call list in the user interface offers a separate view for rejected calls
    - **Improved** For company lines (SIP trunk and SIP DDI lines), a settings offered to support setting any telephone numbers desired (CLIP no screening)
    - **Improved** Integrated fax function supports sending up to ten pages of text
    - **Improved** If a storage location is set in the fax function of the FRITZ!Box, sent faxes will be stored there along with received faxes
    - **Improved** New methods for call diversion to external destinations supported for certain telephony providers (302 - Moved temporarily)
    - **Improved** Automatic configuration of telephone numbers for provider Telekom adapted to the latest network demands
    - **Improved** Increased robustness of telephony against partial failure of network infrastructures when TCP internet protocol in use
    - **Improved** Better interoperability with Swiss provider sipcall
    - **Improved** Maximum length for hold announcement of answering machine increased from 8 to 30 seconds
    - **Improved** Transfer/Forwarding of calls supported (without a query) on IP telephones to other telephones connected with the FRITZ!Box
    - **Change** New missed calls are no longer displayed with a flashing "Info" LED on the FRITZ!Box
    - **Change** New fax and email messages for answering machine services (like the Telekom SprachBox) are no longer displayed with a flashing "Fon" LED on the FRITZ!Box
    - **Fixed** Under the "SIP trunking" selection, telephone numbers could not be created for providers that could be selected for another telephony provider using the same registrar
    - **Fixed** Under the "Other Provider" selection, telephone numbers could not be created for providers that could be selected for another telephony provider using the same registrar
    - **Fixed** Automatic fax recognition for the telephone numbers of the analog landline could not be set up
    - **Fixed** Changes to the settings for the proxy server and STUN server were not adapted in the telephone numbers
    - **Fixed** When the fax function was started in the user interface, only an empty page was displayed if there was an entry without a telephone number in the telephone book
    - **Fixed** Telephone numbers set to "Only via IPv6" could not be switched to use IPv4 without an IPv6 internet connection
    - **Fixed** When preparing a fax in the integrated fax machine for sending, the contents in the "To" field were deleted after selecting a telephone book entry and switching to another input field
    - **Fixed** For IP door intercom systems with multiple doorbells, sometime the desired ring tone was not used
    - **Fixed** When listening to messages on the integrated answering machine with an ISDN telephone, the key shortcut for callback did not work
    - **Fixed** No internet connection with LTE mobile communications dongles from Huawei when using a rate without LTE support

    ## DECT/FRITZ!Fon:
    - **Improved** Telephone book display for FRITZ!Fon C4, C5 and C6 now faster
    - **Improved** Setting up call blocking in the handset is now easier
    - **Improved** Display of FRITZ!Box events with "OK" button in the "FRITZ!Box" start screen
    - **Improved** Pictures can also be browsed with up/down rocker

    ## Home Network:
    - **Improved** "Mesh" added to properties in the network connection overview
    - **Improved** Mesh icon shifted in the Mesh table from the "Connections" column to the "Properties" column
    - **Improved** Reliable display of new AVM Powerline products in the FRITZ!Box home network
    - **Improved** More reliable indication of low powerline data rates in the FRITZ!Box home network
    - **Change** "Smart Home" menu moved to top menu level and "DECT" menu moved to the telephony menu

    ## Smart Home:
    - **Improved** Fiber: Improved - Optimized display of the "Fiber Information" in the user interface
    - **Change** Smart Home: Change - Display of low battery level on Smart Home devices now only on the FRITZ!Box user interface, by push service, and on connected FRITZ!Fon devices
    - **Fixed** Smart Home: Fixed - Wrong target temperature when accessing the FRITZ!Box via MyFRITZ!
    - **Fixed** Smart Home: Fixed - Template for radiator control did not work if heating was off during 01/01 until 31/12

    ## USB:
    - **Improved** When creating new release links on fritz.nas, the user is informed if the FRITZ!Box is not accessible from the internet
    - **Improved** The "USB Devices" and "Storage (NAS)" pages on the user interface were integrated into "USB/Storage" and simplified
    - **Change** "USB Devices" and "Storage (NAS)" menus combined under "Home Network / USB/Storage"
    - **Fixed** A folder released for sharing was not rendered legibly under "Sharing"
    - **Fixed** When uploading a file to fritz.nas by Drag & Drop, each file was uploaded twice
    - **Fixed** The time information "Changed On" was given incorrectly on fritz.nas if the language was not set to German in the FRITZ!Box

    ## System:
    - **Improved** Device name displayed the same everywhere in the Mesh
    - **Improved** "FRITZ!Box Info" push service now includes an option for information on the "Home network"
    - **Improved** New menu icons for "Overview" and "Smart Home"
    - **Improved** "Reset" function in details of network devices for deleting all settings for this device
    - **Improved** Diagnostics check expanded to include "Mesh", "Internet", "DECT" and "Wi-Fi"
    - **Improved** FRITZ!Box support page now includes option to send support data directly to AVM
    - **Improved** Separate restoration of settings for the Smart Home and Telephony areas
    - **Improved** Modernized display of "LEDs" and other symbols throughout the user interface
    - **Improved** Upon the first restart after the update, activation of automatic updates is offered (auto-update level III)
    - **Improved** Warning on the FRITZ!Box Overview on selected settings that are not recommended
    - **Improved** Page structure simplified in many areas of the user interface to improve usability
    - **Improved** Reworked concept for navigation in the wizard for first configuration
    - **Improved** Overview of authorized apps in the "System / FRITZ!Box Users" area now also includes rights and time of last login
    - **Improved** Update information is included in event log (visible only with the next update)
    - **Improved** Update process optimized for automatic updates (silent update, task 60018)
    - **Change** WAN port can be switched as 5th LAN interface if this is not needed as a WAN connection to the internet provider
    - **Change** In the factory settings, the WAN port always works as a WAN interface (an existing setting as 5th LAN interface for this connection is not changed by the update)
    - **Change** Update setting upon delivery is now auto update level III (updates are installed automatically)
    - **Change** User with the name "ftpuser-internet" is deleted

    ## Mobile Communications:
    - **Fixed** Detail corrections to settings and status information when using mobile dongles
    - **Fixed** Not all of the settings for the SMS message push service could be changed
    - **Fixed** Received SMS messages were sometimes rendered with only partial text or with an incorrect time stamp in the push service and in "System / Event Log"

    ## Security:
    - **Improved** More detailed message about security-relevant changes under "System / Event Log"
    - **Improved** Display of the ports that can be reached from the home network under "Diagnostics / Security"
    - **Change** Waiting for the additional confirmation of a change is indicated by the flashing of all LEDs

    ## Repeater:
    - **Improved** Event messages added for WPA3
    - **Improved** Simplified login with the FRITZ!Repeater user interface (drop-down menu and pre-assigned user name)
    - **Improved** Automatic upgrade of Mesh uplink encryption
    - **Improved** Support for configuration at the touch of a button (WPS) with access points that only use 5 GHz Wi-Fi
    - **Change** Option for saving and restoring settings removed
    - **Change** FRITZ!Repeaters without a password assigned that are not enabled for Mesh request that a password be assigned when the user interface is opened
    - **Fixed** Occasional irregular flashing of LED on unconfigured repeater (repeater only)
    - **Fixed** Message on wait time once radar was detected was missing from the event log


    # Further Improvements of FRITZ!OS (within FRITZ!Labor)

    ## Internet:
    - **Improved** "Allow NetBios" not set as default for VPN LAN-LAN linkups
    - **Improved** Blocked network devices now also displayed on the start page
    - **Improved** Reworked troubleshooting for active device block
    - **Improved** Optimized resolution of PTR queries in DNS
    - **Improved** Optimization of error handling (retransmit) for incorrect DNS responses to DNS over TLS (DoT)
    - **Improved** VPN interoperability improved on DS Lite/CG NAT connections
    - **Improved** Added notification (push mail) for changes to the configuration of the DoT (DNS over TSL) settings
    - **Improved** Improved robustness and performance for DoT (DNS over TLS)
    - **Improved** Improved stability for name resolution (DNS) over TCP
    - **Improved** Improved stability for VPN connections
    - **Improved** Prevention of fallback scenarios with DNS over TLS (DoT) when the FRITZ!Box is offline
    - **Improved** Improved stability for name resolution in the internet (DNS), especially when the remote site suddenly aborted the connection
    - **Improved** Improved stability for encrypted name resolution in the internet (DNS over TLS, DoT)
    - **Change** Error message if list of fully qualified domain names (FQDNs) for DNS over TLS (DoT) is empty
    - **Change** Strict syntax check for fully qualified domain names (FQDNs) for DNS over TLS (DoT)
    - **Fixed** Detailed view of devices at LAN guest access showed blank page
    - **Fixed** Fully qualified domain names (FQDNs) for DNS over TLS (DoT) were not retained after disabling
    - **Fixed** Reproducible restart when a network application was added to "Internet / Filters"
    - **Fixed** Prioritized applications were deleted upon restart
    - **Fixed** VPN connections created by software generated a white page in the VPN table
    - **Fixed** In the first configuration wizard, configuration via "existing connection over Wi-Fi" was not possible
    - **Fixed** Incomplete troubleshooting for device block
    - **Fixed** Troubleshooting for device block was incomplete
    - **Fixed** On DS-Lite lines, the IPv4 address of the FRITZ!Box home network was displayed in the "Online Monitor" as an external IPv4 address
    - **Fixed** Misleading display after disabling FTP when FTP internet access was not enabled
    - **Fixed** IP Client with DHCP operating mode could no longer be configured in some cases
    - **Fixed** Inconsistencies in display of times blocked by parental controls
    - **Fixed** Progress display missing in the configuration wizard for selection of "Internet connection via LAN" or "Internet connection via Wi-Fi"
    - **Fixed** Incorrect warning about diverted or multiply opened ports
    - **Fixed** Incorrect dispatch ID sometimes displayed for generation of support data
    - **Fixed** Display problems in the port sharing overview
    - **Fixed** During configuration of MyFRITZ! internet access for existing users, no NAS rights were set
    - **Fixed** On a FRITZ!Box configured as an IP client, it was not possible to reset additional protection for MyFRITZ! (myfritz.net)
    - **Fixed** Email notification about successful update was not sent to the MyFRITZ! email address (myfritz.net)
    - **Fixed** VPN connection to a FRITZ!Box with older version of FRITZ!OS was not always possible
    - **Fixed** Remote access via HTTPS/MyFRITZ! led to occasional interruptions due to invalid session
    - **Fixed** After reboot it was not possible to reset additional protection for MyFRITZ! (myfritz.net)
    - **Fixed** After rebooting, all prioritization rules for a network application were deleted except the first prioritization rule
    - **Fixed** No internet access possible when a VPN connection used with a smartphone
    - **Fixed** Under some circumstances, a device on the Wi-Fi guest access of the repeater was not assigned an IP address via DHCP
    - **Fixed** VPN connection of a downstream FRITZ!Box failed in ATA mode
    - **Fixed** After import of a VPN configuration, the changed configuration was not enabled
    - **Fixed** Corrected details for "Expanded Failover Protection"
    - **Fixed** Push service did not send a mail notifying that encrypted name resolution in the internet (DNS over TLS) had been activated
    - **Fixed** Enabling encrypted name resolution in the internet (DNS over TLS) did not require two-factor authentication
    - **Fixed** Only one port could be shared via manual address entry
    - **Fixed** DNS server learned from a VPN remote site were not taken into account under certain circumstances
    - **Fixed** VPN connections were not established if expanded failover was enabled
    - **Fixed** Ticket entry for parental controls was also displayed on days without time restrictions on internet use
    - **Fixed** VPN connections created by software generated a white page in the VPN table (N75543,75748)
    - **Fixed** VPN connections were not possible on Vodafone lines
    - **Fixed** Change notice with incorrect content when DNS over TLS (DoT) was also enabled on changed DNS servers
    - **Fixed** Error when redeeming valid tickets from parental controls
    - **Fixed** Push mail on FRITZ!OS update was not sent when registration with MyFRITZ! was started but not concluded
    - **Fixed** Occasional VPN connection interruptions under heavy load
    - **Fixed** Under certain circumstances no data were transmitted via the VPN connection
    - **Fixed** UPnP-based services were not found
    - **Fixed** External port for port sharing was assigned twice under certain conditions
    - **Fixed** When devices restricted for a VPN connection, only the first device could use this VPN connection
    - **Fixed** Parental controls prevented access to network devices via VPN
    - **Fixed** Under some circumstances, device on the Wi-Fi guest access of a repeater did not receive an IP address
    - **Fixed** Upload of large files to FRITZ!NAS was not possible
    - **Fixed** When a FRITZ!Box Cable is integrated into an existing network via LAN 1, DSL Lite is enabled by default; error message "DHCP6: got no aftr"
    - **Fixed** Incorrect display in the "Online Monitor" of load on internet connection by guests
    - **Fixed** During configuration of a VPN tunnel for selected LAN ports on the FRITZ!Box, devices connected to those ports were not able to access the internet
    - **Fixed** Unexpected restriction on reaching certain websites when blacklist enabled
    - **Fixed** Occasional restarts at night
    - **Fixed** After resetting two-factor authentication for MyFRITZ! (myfritz.net), FRITZ!OS continued to show two-factor authentication as "active"
    - **Fixed** Occasional VPN connection disruptions under high load
    - **Fixed** Device could not be reached with the device name (host name), device name now replaced by DNS name
    - **Fixed** Servers for encrypted name resolution in the internet (DNS over TLS, DoT) that were shut down in case of error were not always reactivated
    - **Fixed** Servers for encrypted name resolution in the internet (DNS over TLS, DoT) disabled in case of errors were sometimes not enabled again
    - **Fixed** In certain operation modes, the Online Monitor showed no upload traffic
    - **Fixed** Incorrect rendering of downloads in the "Online Monitor"

    ## DSL:
    - **Improved** Better VDSL stability
    - **Fixed** Reduced upstream transmission speed on special lines (Annex J)

    ## Wireless:
    - **Improved** WFA Enhanced Open, new icon for ONE-encrypted Wi-Fi guest access
    - **Improved** New icon ("Suitcase and lock icon") for encrypted connections at the wireless guest access (public Wi-Fi hotspot) with OWE/Enhanced Open (Opportunistic Wireles Encryption)
    - **Improved** New information presented when "WPA2 + WPA3" encryption selected on the "Wi-Fi / Security" page
    - **Improved** New information presented when "WPA2 + WPA3" encryption selected on the "Wi-Fi / Security" page
    - **Improved** Power consumption in "Green AP" mode optimized for a channel bandwidth of 160 MHz (VHT160) (7590)
    - **Improved** Auto-channel function in the 5-GHz band more robust against interference
    - **Improved** Better stability
    - **Improved** Auto channel function further optimized
    - **Improved** Display of real maximum data rate of wireless device rather than the theoretically possible data rate
    - **Improved** Optimized performance
    - **Improved** "Zero Wait DFS" in repeater operating mode enabled on the 5-GHz band whenever uplink to the Mesh Master enabled on 2.4 GHz
    - **Improved** Better stability
    - **Improved** ZeroWaitDFS function improved for channels with 160-MHz bandwidth in the 5-GHz band (7590)
    - **Improved** Better stability
    - **Improved** Better stability
    - **Improved** Better stability
    - **Improved** Messages on Wi-Fi under "System / Events" completed
    - **Improved** Channel bandwidths can be adjusted dynamically (both bands)
    - **Improved** Messages on radar under "System / Event Log / Wi-Fi" completed
    - **Change** Base stations with hidden SSID cannot be displayed
    - **Fixed** WPS can also be started by clicking on a button in the user interface
    - **Fixed** Users received a warning message via push mail for unencrypted guest access (Hotspot)
    - **Fixed** Settings for Wi-Fi schedule were not possible in certain environments (empty page)
    - **Fixed** Different names for the frequency bands (SSIDs) were not applied
    - **Fixed** Display of the QR code on the "Wi-Fi / Wi-Fi Network" page when the SSID was the same and the 2.4-GHz band was disabled
    - **Fixed** No settings for the Mesh Repeater were shown in the "Wi-Fi" menu
    - **Fixed** Incorrect display on the "Wi-Fi Info" page
    - **Fixed** Incorrect confirmation dialog when encryption mode changed
    - **Fixed** Under "Wi-Fi / Wi-Fi Network /
    - **Fixed** Settings for Wi-Fi schedule could not be changed
    - **Fixed** Wi-Fi guest access by telephone or MyFRITZ.box can be activated in "Existing connection via Wi-Fi" operating mode
    - **Fixed** For FRITZ!Box models set to use "Existing connection via Wi-Fi": Encryption of uplink could not be set to WPA2
    - **Fixed** First configuration of the FRITZ!Box failed at "Existing connection over Wi-Fi"
    - **Fixed** Detection of interference in the Wi-Fi network again possible
    - **Fixed** Wireless devices on the public wireless hotspot were not displayed correctly
    - **Fixed** Authentication problems with WPA3
    - **Fixed** For a 2.4-GHz uplink to the Mesh Master during operation in "Wireless Repeater" mode, no messages on radar detection appear under "System / Event Log"
    - **Fixed** After interrupted switch of channels, connection was lost
    - **Fixed** Incorrect channel bandwidth displayed for Wi-Fi guest access after radar detection
    - **Fixed** Displays for bandwidth and number of Wi-Fi streams were incorrect for repeater connections
    - **Fixed** Connection losses of wireless devices at the 5-GHz AP (FRITZ!Box with ZeroWaitDFS function)
    - **Fixed** Error while setting the Wi-Fi channel whenever radar was detected during the channel switch (5-GHz band)
    - **Fixed** Connection problems for wireless devices with QCA chipsets for channel bandwidth of 160 MHz (VHT160)
    - **Fixed** Problems with activation of the Wi-Fi guest access
    - **Fixed** Activation of 160 MHz (VHT160) channel bandwidth in certain operating scenarios was not possible after events caused by radar (ZeroWaitDFS)
    - **Fixed** Wi-Fi channel could not be set correctly for Zero Wait DFS in the 5-GHz band when all channels could be used freely
    - **Fixed** Incorrect display of channel bandwidth for connections with bandwidth ov 160 MHz (VHT160) to repeaters with QCA chipsets
    - **Fixed** Problems during combined use of WPS and auto channel
    - **Fixed** Configuration for use of an existing internet connection via Wi-Fi did not work
    - **Fixed** Problems could occur when registering wireless devices with the "Connect/WPS" button
    - **Fixed** Incorrect display of current data rates on the "Wi-Fi / Wi-Fi Network" page for Wi-Fi connection (2.4 GHz) to the Mesh Master

    ## Mesh:
    - **Improved** Channel bandwidth taken into consideratio for Mesh steering decisions
    - **Improved** Allows Mesh steering between access points with fixed WPA encryption and those with mixed WPA encryption
    - **Improved** Stability of connection between FRITZ!Repeaters and FRITZ!Box improved in certain situations
    - **Improved** Stability
    - **Fixed** Data rates of FRITZ!Repeaters' LAN connections were not displayed
    - **Fixed** In certain cases a network device was not displayed in the Mesh Overview
    - **Fixed** No connection possible when "non-encrypted" was selected as encryption
    - **Fixed** Activation of "WPA/WPA2" mode was not adopted by FRITZ!Repeaters in the Mesh
    - **Fixed** LAN guest access was not switched on/off on the FRITZ!Box working as a Mesh Repeater when only 2.4 GHz enabled on the Mesh Master
    - **Fixed** The combination of Wi-Fi settings "Mixed Mode" and "PMF" was not applied correctly in the Mesh
    - **Fixed** Switch of Wi-Fi encryption to WPA3 was not reliably applied on the FRITZ!Repeater operating in "LAN bridge" mode

    ## Telephony:
    - **Improved** Labeling of multiple/overlapping use of telephone numbers by the internal answering machine standardized
    - **Improved** Further optimization of the mobile view for managing telephone numbers
    - **Improved** Corrected details for the new transfer function with IP telephones
    - **Improved** Various details corrected for telephony provider profiles for Germany, Austria, Switzerland, Italy and the Netherlands, and additional provider profiles added
    - **Improved** Better stability
    - **Improved** Enhanced compatibility for encrypted telephony for connections across networks
    - **Improved** Minor adjustments for various telephony provider profiles in Italy and the Netherlands
    - **Improved** Presettings adjusted for some telephony providers in the countries Austria, Italy and the Netherlands (A1, Vodafone, Fastweb, Freedom, Voys)
    - **Improved** Details improved in the telephony provider profiles for EW and Plusnet
    - **Change** CardDAV provider "MagentaCloud" renamed to "TelekomMail"
    - **Fixed** Dialing rules could not be set up
    - **Fixed** Various bug fixes for CardDAV and iCloud telephone books
    - **Fixed** When creating new telephone numbers, the first area code entered was not applied to the line settings
    - **Fixed** Area codes starting with 01 or 1 were not accepted (for instance, 01 for Vienna with the Austrian country code)
    - **Fixed** On the Start page, most of the telephone numbers of a SIP trunk were displayed as not registered
    - **Fixed** Telephone numbers could not be managed in mobile view (with iOS)
    - **Fixed** When creating and editing telephone numbers under "Other provider", the password was requested
    - **Fixed** Import of contacts to the iCloud and CardDAV telephone book failed with error code 20
    - **Fixed** CardDAV telephone book for providers like nextcloud/owncloud did not synchronize any sub-telephone books
    - **Fixed** Answering machine messages could not be played back over the user interface
    - **Fixed** Manual configuration of telephone numbers failed for Vodafone provider
    - **Fixed** Incorrect rendering of regional prefix during editing
    - **Fixed** Incorrect display of area code when editing the SIP trunks of certain providers (e.g., Easybell)
    - **Fixed** Corrections for the telephony provider profiles "Vodafone zuhause" and "A1 SIP-Trunk"
    - **Fixed** Wrong default settings for music on hold after loading the factory settings
    - **Fixed** Incorrect message when fax function configured without telephone number assignment

    ## DECT:
    - **Fixed** Public hotspot could not be switched with DECT handset

    ## Home Network:
    - **Improved** Improved display of locked devices in device details
    - **Change** Option to switch the WAN port to 5th LAN port operation
    - **Fixed** The note "valid starting with the next query" under the IP address of unused connections was visible too often
    - **Fixed** Problems with adjusting the speed of LAN ports
    - **Fixed** Problems setting up static routes
    - **Fixed** The "Start Computer" (Wake on LAN) button was missing for certain connection types
    - **Fixed** Access profile of parental controls could no longer be changed in the device details
    - **Fixed** Graphics error for certain options in the device details
    - **Fixed** Mesh Repeaters displayed the name of the Mesh Master instead of their own name
    - **Fixed** Possible failure of LAN sockets until next restart

    ## USB/NAS:
    - **Fixed** Files and folders were displayed twice and could not be deleted

    ## USB:
    - **Improved** New option for indexing storage manually
    - **Improved** Tethering devices were not displayed correctly
    - **Improved** Display of tethering devices as their own category
    - **Improved** New option for indexing storage manually
    - **Improved** USB performance improved via Windows network drive function (SMB)
    - **Fixed** USB settings could not be changed
    - **Fixed** Search in FRITZ!NAS did not always work reliably
    - **Fixed** RSS feeds could not be added
    - **Fixed** Folders and files were displayed twice in FRITZ!NAS and could not be deleted
    - **Fixed** USB Device Overview: Ejection of storage assigned on mobile communications dongles did not work
    - **Fixed** USB Device Overview: Display of tethering dongles was incorrect
    - **Fixed** For search results on http://fritz.nas no HTML5 player was started when a file was supposed to be played back
    - **Fixed** The media server was not found
    - **Fixed** The printer on the USB remote connection was not found
    - **Fixed** USB remote connection did not work
    - **Fixed** Some files could not be opened via the network drive (SMB)
    - **Fixed** When network drive (SMB) was accessed, the IP address of the home network device was not listed in the "Event Log"
    - **Fixed** Access to online storage failed because storage was supposedly full
    - **Fixed** Incorrect display of storage capacity
    - **Fixed** Network drive function (SMB) for overwriting files on "fritz.nas" in Windows 10 started only with a long delay
    - **Fixed** Under some conditions no folder could be created or files could be accessed via Windows network drives (concerned partitions formatted as NTFS)
    - **Fixed** In some constellations it was not possible to connect to online memory

    ## System:
    - **Improved** Popup informing about outdated browser when opening FRITZ!Box interface
    - **Improved** Mesh information added to the support data under "Contents / FRITZ!Box Support"
    - **Improved** Diagnostics function check expanded to include NTP
    - **Improved** Expanded diagnostics function check in the "Wi-Fi" area
    - **Improved** Display of blocked devices added to the "Overview" page
    - **Improved** Rendering of blocked devices in the user interface completed
    - **Improved** Corrected details in the user interface
    - **Improved** Improved evaluation of Wi-Fi connection in "Diagnostics / Function"
    - **Improved** Stability
    - **Improved** Faster loading of the user interface
    - **Fixed** No email notification about available updates via myfritz.net
    - **Fixed** Function diagnostics showed connection errors for functioning Mesh Repeater connections
    - **Fixed** Problem when changing recipient of push service mail
    - **Fixed** Misleading error message in diagnostics when a downstream FRITZ!Box was registered with MyFRITZ! (myfritz.net) as an IP client
    - **Fixed** The "Internet / Cable Information / Statistics" page was no longer displayed when the "uBlock" plug-in was activated (FRITZ!Box Cable only)
    - **Fixed** User interface could not be reached with older versions of Edge
    - **Fixed** Empty page for multiple execution of "Diagnostics / Security"
    - **Fixed** After exiting the wizard for first configuration, routing led to the wrong page
    - **Fixed** Inconsistent progress display in the wizard for first configuration
    - **Fixed** Incorrect display of dispatch ID for support data
    - **Fixed** Missing display of evaluation for password assignment
    - **Fixed** Rendering during IP client operation via LAN was not correct in "Diagnostics / Function"
    - **Fixed** "Diagnostics / Function" on Mesh Repeaters indicated non-existent doubling of names for the Wi-Fi network
    - **Fixed** Error when ending configuration wizard
    - **Fixed** Incorrect connection status for repeaters shown under "Diagnostics / Function" on the Mesh Master
    - **Fixed** When maximum number of users reached, an empty page was displayed when the settings were opened under "System / FRITZ!Box Users"
    - **Fixed** Welcome page to lab with information on new features could not be closed in iOS 13
    - **Fixed** Empty page in the statistics of the "Energy Monitor" when "Italian" set as language
    - **Fixed** Configuration of telepone numbers and telephony devices missing in the Configuration wizard
    - **Fixed** Incorrect display of the "Password" field under "System / Backup"
    - **Fixed** Deletion of app rights was not successful
    - **Fixed** Occasionally the "Error code 1" dialog appeared in "Diagnostics" after an updating and then the user interface could no longer be reached
    - **Fixed** Either the name of the Mesh Master or no name was used when sending Push Services from Mesh Repeaters
    - **Fixed** Potential FRITZ!Box restart when "Diagnostics / Security" opened
    - **Fixed** Push mail on the FRITZ!OS update sometimes contained incorrect information about how the update was initiated
    - **Fixed** Attempt to import a configuration generated with lab firmware failed under some circumstances
    - **Fixed** The "DSL Version" was missing in mail from the "FRITZ!Box Info" push service
    - **Fixed** After set to IP client mode, a fixed IP address was always configured
    - **Fixed** Recurring restarts in connection with a special setting for fax reception
    - **Fixed** Fax sending triggered a delivery error for push service, although push service was not enabled
    - **Fixed** Frequent restarts with certain USB flash drives (mobile network)
    - **Fixed** Adjustment of LED brightness to ambient light did not work
    - **Fixed** Problems with setting LED brightness

    ## Mobile Communications:
    - **Fixed** Huawei 3372 LTE dongles were sporadically detected as tethering devices, even though the dongle's firmware does not support tethering
    - **Fixed** Incorrect PIN/PUK treatment for 4G Systems W1208 dongle when the dongle was already inserted when the FRITZ!Box was started
    - **Fixed** USB/Mobile Communications: Fixed - Optimized packet handling was inactive for mobile dongles

  13. #3328
    Εγγραφή
    26-05-2019
    Ηλικία
    39
    Μηνύματα
    294
    Downloads
    0
    Uploads
    0
    Τύπος
    VDSL2
    Ταχύτητα
    70000/10996
    ISP
    ΟΤΕ Conn-x
    Router
    Fritz!Box 7590
    SNR / Attn
    9db(dB) / 20db(dB)
    Path Level
    Interleaved
    Μόλις έκανα update... Κανένα πρόβλημα μέχρι στιγμής.

  14. #3329
    Εγγραφή
    19-01-2006
    Περιοχή
    Ν. Ηράκλειο
    Ηλικία
    48
    Μηνύματα
    2.611
    Downloads
    2
    Uploads
    0
    Τύπος
    FTTH
    Ταχύτητα
    1Gbps/1Gbps
    ISP
    InaLan
    DSLAM
    ΟΤΕ - Ν. ΙΩΝΙΑ
    Router
    AVM Fritz 7590
    εγω μολις κατεβασα το τελευταίο Lab για να έχω το recovery σε 7.13

    το 7.20 σε κανεναν μήνα.

    Γιατί έχω και τηλεφωνια με 3g dongle και δεν θέλω να παιδευομαι πριν τις διακοπες.

  15. #3330
    Εγγραφή
    26-05-2019
    Ηλικία
    39
    Μηνύματα
    294
    Downloads
    0
    Uploads
    0
    Τύπος
    VDSL2
    Ταχύτητα
    70000/10996
    ISP
    ΟΤΕ Conn-x
    Router
    Fritz!Box 7590
    SNR / Attn
    9db(dB) / 20db(dB)
    Path Level
    Interleaved
    Παράθεση Αρχικό μήνυμα από k.m. Εμφάνιση μηνυμάτων
    εγω μολις κατεβασα το τελευταίο Lab για να έχω το recovery σε 7.13

    το 7.20 σε κανεναν μήνα.

    Γιατί έχω και τηλεφωνια με 3g dongle και δεν θέλω να παιδευομαι πριν τις διακοπες.
    Δουλεύει κ το Internet Backup της cosmote χώρις πρόβλημα

Σελ. 222 από 588 ΠρώτηΠρώτη ... 202212217220221222223224227232242 ... ΤελευταίαΤελευταία

Παρόμοια Θέματα

  1. Γερμανικο AVM Fritz!Box 7490 (20002584)
    Από The Byte Healer στο φόρουμ AVM ADSL modems και routers
    Μηνύματα: 210
    Τελευταίο Μήνυμα: 06-03-22, 05:36
  2. AVM Fritz!Box 7490 από amazon.de
    Από hipath στο φόρουμ AVM ADSL modems και routers
    Μηνύματα: 80
    Τελευταίο Μήνυμα: 25-12-17, 19:56
  3. Fritz!Box 7170 σύνδεση σε OTE ISDN
    Από Panagioths στο φόρουμ AVM ADSL modems και routers
    Μηνύματα: 10
    Τελευταίο Μήνυμα: 19-03-17, 02:54
  4. FRITZ!BOX 7340 και αδυναμία πρόσβασής του από IP telephone apk
    Από aprilmaria στο φόρουμ AVM ADSL modems και routers
    Μηνύματα: 2
    Τελευταίο Μήνυμα: 27-12-16, 19:44

Bookmarks

Bookmarks

Δικαιώματα - Επιλογές

  • Δεν μπορείτε να δημοσιεύσετε νέα θέματα
  • Δεν μπορείτε να δημοσιεύσετε νέα μηνύματα
  • Δεν μπορείτε να αναρτήσετε συνημμένα
  • Δεν μπορείτε να επεξεργαστείτε τα μηνύματα σας
  •  
  • Τα BB code είναι σε λειτουργία
  • Τα Smilies είναι σε λειτουργία
  • Το [IMG] είναι σε λειτουργία
  • Το [VIDEO] είναι σε λειτουργία
  • Το HTML είναι εκτός λειτουργίας