Περί ROS ο λόγος...

[jkarabas]

δωσε περισσοτερες πληροφοριες τι ειδους VOIP ειναι αυτο?
και εγω δουλευω VOIP αλλα δεν το βγαζω στο ιντερνετ.
Μηπως το βγαζεις στο ιντερνετ εσυ και κατι αλλαξε στο firewall?
τι ειναι το sip service?

Το εξηγεί ο Deni εδώ γιατί πρέπει να απενεργοποιηθεί. Η mikrotik αναφέρει σε ποιές περιπτώσεις πρέπει να είναι ενεργοποιημένο.
Το είχα disable και το ενεργοποίησα ξανά μετά το πρόβλημα που προέκυψε.
Δεν ξέρω ακόμη εάν αυτή είναι η λύση. Πάντως μέχρι στιγμής όλα καλά.
Έχω το fritz επάνω στο δίκτυό μου σαν voip.
Δεν έχει να κάνει με το internet και με το firewall.
To sip service μέσα στο mikrotik ενεργοποιεί τις πόρτες 5060-5061 που είναι για τη voip τηλεφωνία.

[macro]

Παραθετω τη κουβεντα που ειχαν στη mikrotik για το Slingshot

https://forum.mikrotik.com/viewtopic.php?f=2&t=131748

[Nikiforos]

Το εξηγεί ο Deni εδώ γιατί πρέπει να απενεργοποιηθεί. Η mikrotik αναφέρει σε ποιές περιπτώσεις πρέπει να είναι ενεργοποιημένο.
Το είχα disable και το ενεργοποίησα ξανά μετά το πρόβλημα που προέκυψε.
Δεν ξέρω ακόμη εάν αυτή είναι η λύση. Πάντως μέχρι στιγμής όλα καλά.
Έχω το fritz επάνω στο δίκτυό μου σαν voip.
Δεν έχει να κάνει με το internet και με το firewall.
To sip service μέσα στο mikrotik ενεργοποιεί τις πόρτες 5060-5061 που είναι για τη voip τηλεφωνία.

καλημερα, το θεμα εκεινο δεν το εχω διαβασει ποτε γιατι δεν ειναι σε αυτα που με αφορα.
Οποτε το δουλευεις με εσωτερικα πραγματα οχι κατι μεσω ιντερνετ.
Δεν εχω πειραξει απολυτως τπτ και δεν πειραζω τπτ γιατι μια χαρα μου δουλευουν ολα οποτε δεν υπαρχει κανενας απολυτως λογος να τα σκαλιζω.
Αν σου δουλευει εσενα ετσι αστο ετσι τοτε.

[deniSun]

Το εξηγεί ο Deni εδώ γιατί πρέπει να απενεργοποιηθεί. Η mikrotik αναφέρει σε ποιές περιπτώσεις πρέπει να είναι ενεργοποιημένο.
Το είχα disable και το ενεργοποίησα ξανά μετά το πρόβλημα που προέκυψε.
Δεν ξέρω ακόμη εάν αυτή είναι η λύση. Πάντως μέχρι στιγμής όλα καλά.
Έχω το fritz επάνω στο δίκτυό μου σαν voip.
Δεν έχει να κάνει με το internet και με το firewall.
To sip service μέσα στο mikrotik ενεργοποιεί τις πόρτες 5060-5061 που είναι για τη voip τηλεφωνία.

Μόνο η 5060 χρειάζεται.

[Nikiforos]

Μόνο η 5060 χρειάζεται.

οχι, αναλογα τα μηχανηματα μπορουμε να παιξουμε και στην 5061, εγω εχω μερικα σε αυτην. Aπλα η 5060 ειναι η default και η ποιο συνηθισμενη.

[jkoukos]

Η 5061 είναι η αντίστοιχη του SIP για 5060 αλλά για TLS επικοινωνία, δηλαδή για χρήση κρυπτογράφησης.

[Nikiforos]

Η 5061 είναι η αντίστοιχη του SIP για 5060 αλλά για TLS επικοινωνία, δηλαδή για χρήση κρυπτογράφησης.

και υπαρχει προβλημα σε αυτο? γιατι σε καποια πραγματα εχω 5061, αυτο παραπανω στην φωτο ειναι ενα linksys PAP2. Τωρα γιατι εχω βαλει αυτη δεν θυμαμαι νομιζω ειχα καποια εμπλοκη αν ολα ειναι στην 5060.

[jkoukos]

Όποια θέλεις βάζεις δεν υπάρχει θέμα.
Βασικά δεν την βάζεις εσύ αλλά ρητά την ζητά ο server (εκτός αν είναι δικός σου). Εσύ απλά ως client υπακούεις και μόνο τις RTP έχεις δικαίωμα να επιλέξεις όποιες θέλεις.
Αλλά όλοι οι δημόσιοι servers χρησιμοποιούν την 5060 και αντίστοιχα για TLS την 5061.

[Nikiforos]

δεν λεω για δημοσιους servers δικος μου ειναι στον αστερισκ μου συνδεονται ολα στο nas server.

[deniSun]

6.40.7 bugfix changelog:

*) console - do not allow variables that start with digit to be referenced without "$" sign;
*) led - fixed unused "link-act-led" LED trigger on RBLHG 2nD, RBLHG 2nD-XL and RBSXTsq 2nD;
*) netinstall - sign Netinstall executable with an Extended Validation Code Signing Certificate;
*) romon - make "secret" field sensitive in console;
*) tr069-client - fixed TR069 service becoming unavailable when related service package is not installed;
*) winbox - fixed "/tool e-mail send" attachment behavior;
*) winbox - fixed maximal ID for Traffic Generator stream;
*) winbox - made UDP local and remote TX size parameter optional in Bandwidth Test tool;
*) winbox - removed "Enable" and "Disable" buttons from IPsec "mode-config" list;
*) winbox - show "D" flag under "/ip dhcp-client" menu;
*) winbox - use proper graph name for HDD graphs;
*) wireless - enable all chains by default on devices without external antennas after configuration reset;

[Nikiforos]

What's new in 6.41.4 (2018-Apr-05 12:23): CURRENT

!) tile - improved overall system performance and stability ("/system routerboard upgrade" required);
*) led - fixed unused "link-act-led" LED trigger on RBLHG 2nD, RBLHG 2nD-XL and RBSXTsq 2nD;
*) led - removed unused "link-act-led" trigger for devices which does not use it;
*) netinstall - sign Netinstall executable with an Extended Validation Code Signing Certificate;
*) poe - do not show "poe-out-current" on devices which can not determine it;
*) poe - hide PoE related properties on interfaces which does not provide power output;
*) winbox - made UDP local and remote TX size parameters optional in Bandwidth Test tool;
*) winbox - show dual SIM options only for RouterBOARDs which does have two SIM slots;
*) winbox - use proper graph name for HDD graphs;
*) wireless - enable all chains by default on devices without external antennas after configuration reset;

[deniSun]

What's new in 6.42 (2018-Apr-13 11:03):

Spoiler:

!) tile - improved system performance and stability ("/system routerboard upgrade" required);
!) w60g - increased distance for wAP 60G to 200+ meters;
*) bridge - added host aging timer for CRS3xx and Atheros hw-bridges;
*) bridge - added per-port forwarding options for broadcasts, unknown-multicasts and unknown-unicasts;
*) bridge - added per-port learning options;
*) bridge - added support for static hosts;
*) bridge - fixed "master-port" configuration conversion from pre-v6.41 RouterOS versions;
*) bridge - fixed bridge port interface parameter under "/interface bridge host print detail";
*) bridge - fixed false MAC address learning on hAP ac^2 and cAP ac devices;
*) bridge - fixed incorrect "fast-forward" enabling when ports were switched;
*) bridge - fixed MAC learning for VRRP interfaces on bridge;
*) bridge - fixed reliability on software bridges when used on devices without switch chip;
*) bridge - hide options for disabled bridge features in CLI;
*) bridge - show "hw" flags only on Ethernet interfaces and interface lists;
*) capsman - added "allow-signal-out-of-range" option for Access List entries;
*) capsman - added support for "interface-list" in Access List and Datapath entries;
*) capsman - improved CAPsMAN responsiveness with large amount of CAP interfaces;
*) capsman - log "signal-strength" when successfully connected to AP;
*) certificate - added PKCS#10 version check;
*) certificate - dropped DES support and added AES instead for SCEP;
*) certificate - dropped MD5 support and require SHA1 as minimum for SCEP;
*) certificate - fixed incorrect SCEP URL after an upgrade;
*) chr - added "open-vm-tools" on VMware installations;
*) chr - added "qemu-guest-agent" and "virtio-scsi" driver on KVM installations;
*) chr - added "xe-daemon" on Xen installations;
*) chr - added support for Amazon Elastic Network Adapter (ENA) driver;
*) chr - added support for booting from NVMe disks;
*) chr - added support for Hyper-V ballooning, guest quiescing, host-guest file transfer, integration services and static IP injection;
*) chr - added support for NIC hot-plug on VMware and Xen installations;
*) chr - fixed additional disk detaching on Xen installations;
*) chr - fixed interface matching by name on VMware installations;
*) chr - fixed interface naming order when adding more than 4 interfaces on VMware installations;
*) chr - fixed suspend on Xen installations;
*) chr - make additional disks visible under "/disk" on Xen installations;
*) chr - make Virtio disks visible under "/disk" on KVM installations;
*) chr - run startup scripts on the first boot on AWS and Google Cloud installations;
*) console - fixed "idpr-cmtp" protocol by changing its value from 39 to 38;
*) console - improved console stability after it has not been used for a long time;
*) crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
*) crs212 - fixed Ethernet boot when connected to boot server through CRS326 device;
*) crs326 - fixed known multicast flooding to the CPU;
*) crs3xx - added switch port "storm-rate" limiting options;
*) crs3xx - added “hw-offload” support for 802.3ad and “balance-xor” bonding;
*) detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced in v6.41);
*) dhcp - improved DHCP service reliability when it is configured on bridge interface;
*) dhcp - reduced resource usage of DHCP services;
*) dhcpv4-server - added "dns-none" option to "/ip dhcp-server network dns";
*) dhcpv6 - make sure that time is set before restoring bindings;
*) dhcpv6-client - added info exchange support;
*) dhcpv6-client - added possibility to specify options;
*) dhcpv6-client - added support for options 15 and 16;
*) dhcpv6-client - implement confirm after reboot;
*) dhcpv6-server - added DHCPv4 style user options;
*) dns - do not generate "Undo" messages on changes to dynamic servers;
*) email - set maximum number of sessions to 100;
*) fetch - added "http-content-type" option to allow setting MIME type of the data in free text form;
*) fetch - added "output" option for all modes in order to return result to file, variable or ignore it;
*) fetch - increased maximum number of sessions to 100;
*) filesystem - implemented additional system storage maintenance checks on ARM CPU based devices;
*) flashfig - properly apply configuration provided by Flashfig;
*) gps - improved NMEA sentence handling;
*) health - added log warning when switching between redundant power supplies;
*) health - fixed empty measurements on CRS328-24P-4S+RM;
*) hotspot - improved HTTPS matching in Walled Garden rules;
*) ike1 - display error message when peer requests "mode-config" when it is not configured;
*) ike1 - do not accept "mode-config" reply more than once;
*) ike1 - fixed wildcard policy lookup on responder;
*) ike2 - fixed framed IP address received from RADIUS server;
*) interface - improved interface configuration responsiveness;
*) ippool - added ability to specify comment;
*) ippool6 - added pool name to "no more addresses left" error message;
*) ipsec - fixed AES-CTR and AES-GCM support on RB1200;
*) ipsec - improved single tunnel hardware acceleration performance on MMIPS devices;
*) ipsec - properly detect interface for "mode-config" client IP address assignment;
*) ipv6 - fixed IPv6 behaviour when bridge port leaves bridge;
*) ipv6 - update IPv6 DNS from RA only when it is changed;
*) kidcontrol - initial work on "/ip kid-control" feature;
*) led - added "Dark Mode" support for wAP 60G;
*) led - added w60g alignment trigger;
*) led - fixed unused "link-act-led" LED trigger on RBLHG 2nD, RBLHG 2nD-XL and RBSXTsq 2nD;
*) led - removed unused "link-act-led" trigger for devices which does not use it;
*) lte - added initial support for Quectel LTE EP06-E;
*) lte - added initial support for SIM7600 LTE modem interface;
*) lte - added support for the user and password authentication for wAP-LTE-kit-US (R11e-LTE-US);
*) lte - do not add DHCP client on LTE modems that doesn't use DHCP;
*) lte - fixed DHCP client adding for MF823 modem;
*) lte - fixed LTE band setting for SXT LTE;
*) mac-ping - fixed duplicate responses;
*) modem - added initial support for AC340U;
*) netinstall - fixed MMIPS RouterOS package description;
*) netinstall - sign Netinstall executable with an Extended Validation Code Signing Certificate;
*) netwatch - limit to read, write, test and reboot policies for Netwatch script execution;
*) poe - do not show "poe-out-current" on devices which can not determine it;
*) poe - hide PoE related properties on interfaces that does not provide power output;
*) ppp - added initial support for NETGEAR AC340U and ZyXEL WAH1604;
*) ppp - allow to override remote user PPP profile via "Mikrotik-Group";
*) quickset - fixed NAT if PPPoE client is used for Internet access;
*) quickset - properly detect IP address when one of the bridge modes is used;
*) quickset - properly detect LTE interface on startup;
*) quickset - show "G" flag for guest users;
*) quickset - use "/24" subnet for local network by default;
*) r11e-lte - improved LTE connection initialization process;
*) rb1100ahx4 - improved reliability on hardware encryption;
*) routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required);
*) routerboard - properly detect hAP ac^2 RAM size;
*) sniffer - fixed "/tool sniffer packet" results listed in incorrect order;
*) snmp - added "/caps-man interface print oid";
*) snmp - added "/interface w60g print oid";
*) snmp - added "board-name" OID;
*) snmp - improved request processing performance for wireless and CAP interfaces;
*) ssh - fixed SSH service becoming unavailable;
*) ssh - generate SSH keys only on the first connect attempt instead of the first boot;
*) ssh - improved key import error messages;
*) ssh - remove imported public SSH keys when their owner user is removed;
*) switch - hide "ingress-rate" and "egress-rate" for non-CRS3xx switches;
*) tile - added "aes-ctr" hardware acceleration support;
*) tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
*) tr069-client - correctly return “TransferComplete” after vendor configuration file transfer;
*) tr069-client - fixed "/tool fetch" commands executed with ".alter" script;
*) tr069-client - fixed HTTPS authentication process;
*) traffic-flow - fixed IPv6 destination address value when IPFIX protocol is used;
*) upgrade - improved RouterOS upgrade process and restrict upgrade from RouterOS older than v5.16;
*) ups - improved communication between router and UPS;
*) ups - improved disconnect message handling between RouterOS and UPS;
*) userman - added support for ARM and MMIPS platform;
*) w60g - added "tx-power" setting (CLI only);
*) w60g - added RSSI information (CLI only);
*) w60g - added TX sector alignment information (CLI only);
*) watchdog - retry to send "autosupout.rif" file to an e-mail if initial delivery failed up to 3 times within 20 second interval;
*) winbox - added "antenna" setting under GPS settings for MIPS platform devices;
*) winbox - added "crl-store" setting to certificate settings;
*) winbox - added "insert-queue-before" to DHCP server;
*) winbox - added "use-dn" setting in OSPF instance General menu;
*) winbox - added 160 MHz "channel-width" to wireless settings;
*) winbox - added DHCPv6 client info request type and updated statuses;
*) winbox - added missing protocol numbers to IPv4 and IPv6 firewall;
*) winbox - added possibility to delete SMS from inbox;
*) winbox - allow to comment new object without committing it;
*) winbox - allow to open bridge host entry;
*) winbox - fixed name for "out-bridge-list" parameter under bridge firewall rules;
*) winbox - fixed typo from "UPtime" to "Uptime";
*) winbox - fixed Winbox closing when viewing graph which does not contain any data;
*) winbox - improved stability when using trackpad scrolling in large lists;
*) winbox - made UDP local and remote TX size parameters optional in Bandwidth Test tool;
*) winbox - moved "ageing-time" setting from STP to General tab;
*) winbox - moved OSPF instance "routing-table" setting in OSPF instance General menu;
*) winbox - removed “VLAN” section from “Switch” menu for CRS3xx devices;
*) winbox - show Bridge Port PVID column by default;
*) winbox - show CQI in LTE info;
*) winbox - show dual SIM options only for RouterBOARDS which does have two SIM slots;
*) winbox - show only master CAP interfaces under CAPsMAN wireless scan tool;
*) winbox - use proper graph name for HDD graphs;
*) wireless - added "realm-raw" setting for "/interface wireless interworking-profiles" (CLI only);
*) wireless - added initial support for "nstreme-plus";
*) wireless - added support for "band=5ghz-n/ac";
*) wireless - added support for "interface-list" for Access List entries;
*) wireless - added support for legacy AR9485 chipset;
*) wireless - enable all chains by default on devices without external antennas after configuration reset;
*) wireless - fixed "wds-slave" channel selection when single frequency is specified;
*) wireless - fixed incompatibility with macOS clients;
*) wireless - fixed long "scan-list" entries not working for ARM based wireless interfaces;
*) wireless - fixed nv2 protocol on ARM platform SXTsq devices;
*) wireless - fixed RB911-5HnD low transmit power issue;
*) wireless - fixed RTS/CTS option for the ARM based wireless devices;
*) wireless - fixed wsAP wrong 5 GHz interface MAC address;
*) wireless - improved compatibility with specific wireless AC standard clients;
*) wireless - improved Nv2 PtMP performance;
*) wireless - improved packet processing on ARM platform devices;
*) wireless - improved wireless performance on hAP ac^2 devices while USB is being used;
*) wireless - improved wireless scan functionality;

[macro]

να περιμενετε λιγο για αυτο, μη το περασετε αμεσως.

[minas]

να περιμενετε λιγο για αυτο, μη το περασετε αμεσως.

Έχει αναφερθεί κάτι? Την Παρασκευή ήθελα να κάνω reboot ένα μηχανάκι, οπότε του έβαλα και updates, αλλά δεν είχε ακόμα το 6.42 και έλεγα ότι για λίγο ατύχησα .

[macro]

Επειδη ειναι μεγαλο το update μηπως και υπαρχουν brikia.